Dielectrophoresis-based analyte separation and analysis

Dielectrophoresis—the tendency of a material of high dielectric permittivity to migrate in an electrical field gradient to a region of maximum field strength—provides an ideal motive force for manipulating small volumes of biological analytes in microfluidic microsystems. The work described in this thesis was based on the hypothesis that dielectrophoresis could be exploited to provide high-resolution cell separations in microsystems as well as a means for the electrically-controllable manipulation of solid supports for molecular analysis. To this end, a dielectrophoretic/gravitational field-flow-fractionation (DEP/G-FFF) system was developed and the separation performance evaluated using various types and sizes of polystyrene microspheres as model particles. It was shown that separation of the polystyrene beads was based on the differences in their effective dielectrophoretic properties. The ability of an improved DEP/G-FFF system to separate genetically identical, but phenotypically dissimilar cell types was demonstrated using mixtures of 6m2 mutant rat kidney cells grown under transforming and non-transforming culture conditions. Additionally, a panel of engineered dielectric microspheres was designed with specific, predetermined dielectrophoretic properties such that their dielectrophoretic behaviors would be controllable and predictable. The fabrication method involved the use of gold-coated polystyrene microsphere cores coated with a self-assembled monolayer of alkanethiol and, optionally, a self-assembled monolayer of phospholipid to form a thin-insulating-shell-over-conductive-interior structure. The successful development of the DEP/G-FFF separation system and the dielectrically engineered microspheres provides proof-of-principle demonstrations of enabling dielectrophoresis-based microsystem technology that should provide powerful new methods for the manipulation, separation and identification of analytes in many diverse fields. ^

Flow separation and roughness lengths over large bedforms in a tidal environment

This study characterises the shape of the flow separation zone (FSZ) and wake region over large asymmetric bedforms under tidal flow conditions. High resolution bathymetry, flow velocity and turbulence data were measured along two parallel transects in a tidal channel covered with bedforms. The field data are used to verify the applicability of a numerical model for a systematic study using the Delft3D modelling system and test the model sensitivity to roughness length. Three experiments are then conducted to investigate how the FSZ size and wake extent vary depending on tidally-varying flow conditions, water levels and bathymetry. During the ebb, a large FSZ occurs over the steep lee side of each bedform. During the flood, no flow separation develops over the bedforms having a flat crest; however, a small FSZ is observed over the steepest part of the crest of some bedforms, where the slope is locally up to 15°. Over a given bedform morphology and constant water levels, no FSZ occurs for velocity magnitudes smaller than 0.1 m s**-1; as the flow accelerates, the FSZ reaches a stable size for velocity magnitudes greater than 0.4 m s**-1. The shape of the FSZ is not influenced by changes in water levels. On the other hand, variations in bed morphology, as recorded from the high-resolution bathymetry collected during the tidal cycle, influence the size and position of the FSZ: a FSZ develops only when the maximum lee side slope over a horizontal distance of 5 m is greater than 10°. The height and length of the wake region are related to the length of the FSZ. The total roughness along the transect lines is an order of magnitude larger during the ebb than during the flood due to flow direction in relation to bedform asymmetry: during the ebb, roughness is created by the large bedforms because a FSZ and wake develops over the steep lee side. The results add to the understanding of hydrodynamics of natural bedforms in a tidal environment and may be used to better parameterise small-scale processes in large-scale studies.

Identification, Separation, and Characterization of Acyl-Coenzyme A Dehydrogenases Involved in Mitochondrial β-Oxidation in Higher Plants1

The existence in higher plants of an additional β-oxidation system in mitochondria, besides the well-characterized peroxisomal system, is often considered controversial. Unequivocal demonstration of β-oxidation activity in mitochondria should rely on identification of the enzymes specific to mitochondrial β-oxidation. Acyl-coenzyme A dehydrogenase (ACAD) (EC 1.3.99.2,3) activity was detected in purified mitochondria from maize (Zea mays L.) root tips and from embryonic axes of early-germinating sunflower (Helianthus annuus L.) seeds, using as the enzyme assay the reduction of 2,6-dichlorophenolindophenol, with phenazine methosulfate as the intermediate electron carrier. Subcellular fractionation showed that this ACAD activity was associated with mitochondrial fractions. Comparison of ACAD activity in mitochondria and acyl-coenzyme A oxidase activity in peroxisomes showed differences of substrate specificities. Embryonic axes of sunflower seeds were used as starting material for the purification of ACADs. Two distinct ACADs, with medium-chain and long-chain substrate specificities, respectively, were separated by their chromatographic behavior, which was similar to that of mammalian ACADs. The characterization of these ACADs is discussed in relation to the identification of expressed sequenced tags corresponding to ACADs in cDNA sequence analysis projects and with the potential roles of mitochondrial β-oxidation in higher plants.

Separation and fractionation of order and disorder in highly polydisperse systems

We study a polydisperse soft-spheres model for colloids by means of microcanonical Monte Carlo simulations. We consider a polydispersity as high as 24%. Although solidification occurs, neither a crystal nor an amorphous state are thermodynamically stable. A finite size scaling analysis reveals that in the thermodynamic limit: a the fluid-solid transition is rather a crystal-amorphous phase-separation, b such phase-separation is preceded by the dynamic glass transition, and c small and big particles arrange themselves in the two phases according to a complex pattern not predicted by any fractionation scenario.

Isotope separation and isotope exchange; a bibliography of unclassified literature.

Cover title.

Marriage breakdown in Australia - The social correlates of separation and divorce

Marriage breakdown through separation and divorce is a pervasive feature of Australian society. But little research investigates the social factors associated with marital breakdown in Australia. This study builds on and extends Australian research by using survival analysis models to examine patterns of association among temporal, life-course, attitudinal and economic factors associated with marital breakdown. Using data from the Household Income and Labour Dynamics in Australia (HILDA) survey, we find marital breakdown in Australia is socially patterned in similar ways to other Western countries. But our findings point to several directions for future research into marriage breakdown in Australia, and we identify certain unique features of Australian marriage breakdown that warrant a more detailed investigation, such as the relationship between ethnic origin and the risk of marital breakdown.

Myoepithelial calls: Pathology, cell separation and markers of myoepithelial differentiation

Until recently the myoepithelial cell has been studied relatively little in terms of its role in breast cancer. A number of malignancies showing myoepithelial differentiation have been reported in the literature, although they are still thought to be relatively rare and only limited studies are published. As a result of recent expression profiling experiments, one type of tumor with myoepithelial features, the so-called 'basal' breast cancer, has received a renewed interest, although it has been known to pathologists for more than two decades. These tumors, which express markers of both luminal and myoepithelial cells, are now being studied using antibodies against some new molecules that have emerged from studies of sorted normal luminal and myoepithelial cells. These immunohistochemical data, combined with genomic studies, may lead to better identification and management of patients with 'basal' tumors.

In situ studies of phase separation and crystallization directed by Marangoni instabilities during spin-coating

Results of a pioneering study are presented in which for the first time, crystallization, phase separation and Marangoni instabilities occurring during the spin-coating of polymer blends are directly visualized, in real-space and real-time. The results provide exciting new insights into the process of self-assembly, taking place during spin-coating, paving the way for the rational design of processing conditions, to allow desired morphologies to be obtained. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Computationsl modelling of dimethyl ether separation and steam reforming in fluidized bed reactors

This study presents a computational fluid dynamic (CFD) study of Dimethyl Ether (DME) gas adsorptive separation and steam reforming (DME-SR) in a large scale Circulating Fluidized Bed (CFB) reactor. The CFD model is based on Eulerian-Eulerian dispersed flow and solved using commercial software (ANSYS FLUENT). Hydrogen is currently receiving increasing interest as an alternative source of clean energy and has high potential applications, including the transportation sector and power generation. Computational fluid dynamic (CFD) modelling has attracted considerable recognition in the engineering sector consequently leading to using it as a tool for process design and optimisation in many industrial processes. In most cases, these processes are difficult or expensive to conduct in lab scale experiments. The CFD provides a cost effective methodology to gain detailed information up to the microscopic level. The main objectives in this project are to: (i) develop a predictive model using ANSYS FLUENT (CFD) commercial code to simulate the flow hydrodynamics, mass transfer, reactions and heat transfer in a large scale dual fluidized bed system for combined gas separation and steam reforming processes (ii) implement a suitable adsorption models in the CFD code, through a user defined function, to predict selective separation of a gas from a mixture (iii) develop a model for dimethyl ether steam reforming (DME-SR) to predict hydrogen production (iv) carry out detailed parametric analysis in order to establish ideal operating conditions for future industrial application. The project has originated from a real industrial case problem in collaboration with the industrial partner Dow Corning (UK) and jointly funded by the Engineering and Physical Research Council (UK) and Dow Corning. The research examined gas separation by adsorption in a bubbling bed, as part of a dual fluidized bed system. The adsorption process was simulated based on the kinetics derived from the experimental data produced as part of a separate PhD project completed under the same fund. The kinetic model was incorporated in FLUENT CFD tool as a pseudo-first order rate equation; some of the parameters for the pseudo-first order kinetics were obtained using MATLAB. The modelling of the DME adsorption in the designed bubbling bed was performed for the first time in this project and highlights the novelty in the investigations. The simulation results were analysed to provide understanding of the flow hydrodynamic, reactor design and optimum operating condition for efficient separation. Bubbling bed validation by estimation of bed expansion and the solid and gas distribution from simulation agreed well with trends seen in the literatures. Parametric analysis on the adsorption process demonstrated that increasing fluidizing velocity reduced adsorption of DME. This is as a result of reduction in the gas residence time which appears to have much effect compared to the solid residence time. The removal efficiency of DME from the bed was found to be more than 88%. Simulation of the DME-SR in FLUENT CFD was conducted using selected kinetics from literature and implemented in the model using an in-house developed user defined function. The validation of the kinetics was achieved by simulating a case to replicate an experimental study of a laboratory scale bubbling bed by Vicente et al [1]. Good agreement was achieved for the validation of the models, which was then applied in the DME-SR in the large scale riser section of the dual fluidized bed system. This is the first study to use the selected DME-SR kinetics in a circulating fluidized bed (CFB) system and for the geometry size proposed for the project. As a result, the simulation produced the first detailed data on the spatial variation and final gas product in such an industrial scale fluidized bed system. The simulation results provided insight in the flow hydrodynamic, reactor design and optimum operating condition. The solid and gas distribution in the CFB was observed to show good agreement with literatures. The parametric analysis showed that the increase in temperature and steam to DME molar ratio increased the production of hydrogen due to the increased DME conversions, whereas the increase in the space velocity has been found to have an adverse effect. Increasing temperature between 200 oC to 350 oC increased DME conversion from 47% to 99% while hydrogen yield increased substantially from 11% to 100%. The CO2 selectivity decreased from 100% to 91% due to the water gas shift reaction favouring CO at higher temperatures. The higher conversions observed as the temperature increased was reflected on the quantity of unreacted DME and methanol concentrations in the product gas, where both decreased to very low values of 0.27 mol% and 0.46 mol% respectively at 350 °C. Increasing the steam to DME molar ratio from 4 to 7.68 increased the DME conversion from 69% to 87%, while the hydrogen yield increased from 40% to 59%. The CO2 selectivity decreased from 100% to 97%. The decrease in the space velocity from 37104 ml/g/h to 15394 ml/g/h increased the DME conversion from 87% to 100% while increasing the hydrogen yield from 59% to 87%. The parametric analysis suggests an operating condition for maximum hydrogen yield is in the region of 300 oC temperatures and Steam/DME molar ratio of 5. The analysis of the industrial sponsor’s case for the given flow and composition of the gas to be treated suggests that 88% of DME can be adsorbed from the bubbling and consequently producing 224.4t/y of hydrogen in the riser section of the dual fluidized bed system. The process also produces 1458.4t/y of CO2 and 127.9t/y of CO as part of the product gas. The developed models and parametric analysis carried out in this study provided essential guideline for future design of DME-SR at industrial level and in particular this work has been of tremendous importance for the industrial collaborator in order to draw conclusions and plan for future potential implementation of the process at an industrial scale.

Separation and identification fresh water leeches of waters resources in Kordistan Province

In the primary studying, known leeches have included into free living and parasitic which the parasitic group, besides of direct impacts like: growth detraction, anemia, making wound in the connecting part with the skin, with making plat for secondary bacterial and molding infections in the toll place, is able to cause to transfer blood flagellate and virus to the fish too. Therefore, by accusing information related to fauna leeches of each area a risk factor from the viewpoint of the possibility of being or accusing transferred diseases by these leeches, one can predict and forehand about them. Freshwater leeches of Iran to present accurate recognition (morphological, molecular) have not been, and there are some limited reports from different parts of the country about them. One of the areas that its leeches have not been identified yet is Kurdistan, By having five latrines and big permanent rivers and 32000 springs and a lot of deep and semi-deep wells and this province is a convenient bed for growing aquatics in the country. Therefore, identifying risk factors for development of aquaculture on water resources is one important factor to access achieving development goals. For recognizing leeches of this province, some samples from 10 stands were token. Samples from under stones, sticking to the fish, turtles, plants and solid substances in the water were separated and after recording their physical characteristics, calming with 10% ethylic alcohol with 10% formalin become fixed and after painting with Carmen acetic acid by standard keys for 7 species of Helobdella stagnalis, Placobdella costata, Hemiclepsis marginata, Erpobdella octoculata, Hirudo medicinalis, Dina lineate lineata have been identified and described. Which Helobdella stagnalis has the highest distribution in the province and the minimum one is Hirudo medicinalis. However, that the data obtained in leeches in Kurdistan is a relatively complete collection in this research, recognizing fauna of these areas needs more studying. The Placobdella costata and Hemiclepsis marginata sticking to the fish were separated among identified species which showed that these are parasites for the fish. The sticking area of those leeches to the skin was accompanied with scales cast, damage to mucous membranes beneath the parasite and bleeding Was associated with Histopathology studying effect includes observing break and disconnection in the leech connecting place to the epithelial layer of epidermis in the skin, destroyed nucleus in skin Epithelial cells with observing necrosis in ulcerative place become of the leech and the sub acute inflammated penetration until acute necrosis with opening in Dermis layer is observable. Kidney of this fish have changes such as: proliferation, like proliferative kidney disease with increasing proliferative glomerular cells and increasing in membranous cells in Capillary corpuscle, observing necrotic cells in haematopoietic tissue of kidney along with increasing in infiltration of leukocyte's cells generally mono nucluars such as lymphocytes and less poly morpho nucluars such as neutrophiles that are symptoms of disorders causing anemia become of nourishing and sucking blood by the leech and creating a chronic kidney infection that originally root is in another place like the skin. Also Hemorrhagic anemia causes losing RBC's is because of using the host blood by the leech. (In this situation, one can see immature RBC red cells in Peripheral blood. To identify potential carriers of the leech to the viruses, after finding them in recorded stands and putting them in 75% ethanol for viruses cause IPN, VHS, IHN, they were tested by PCR that the conclusion of these experiments approved IPN virus in Hemiclepsis marginata and Hirudo medicinalis. This kind of leeches can act like a mechanical carrier and causing spreading the agent of this disease. It is worth mentioning that studying the pathogenicity of this virus for aquaculture sources, mentioned before needs more research. During the study of infected fish with leeches that was done after preparing bloody slides and staining them, no case blood parasites was observed. During a research about infecting fish experimentally to known leeches it become clear that 5 days after being in aquarium including leeches, samples of sticking Hirudo medicinalis leech to the golden carp with scales cast were observed. Including leeches to the fish started with molting the scales in the sticking area in the fish and fish become too uneasy and by rubbing themselves to the malls and things inside the aquarium, tried to separate them. Finally, after around 30 hours, leeches penetrate the skin, feeding from blood and tissue liquids and cause mortality the fish and then they become separated from them. If the corpse of these fish stayed in the aquarium, the Helobdella stagnalis and Erpobdella octoculata would start feeding them.

Cold vapour generation electrothermal atomic absorption spectrometry and solid phase extraction based on a new nanosorbent for sensitive HG determination in environmental samples (sea water and river water)

Mercury is not an essential element for plant or animal life and it is a potential environmental toxic because of its tendency to form covalent bonds with organic molecules and the high stability of the Hg-C bond. Reports estimate a total mercury concentration in natural waters ranging from 0.2 to 100 ng L-1. Due to this fact, highly sensitive methods are required for direct determination of such extremely low levels. In this work, a rapid and simple method was developed for separation and preconcentration of mercury by flow injection solid phase extraction coupled with on-line chemical vapour generation electrothermal atomic absorption spectrometry. The system is based on chelating retention of the analyte onto the mini column filled with a mesoporous silica functionalized with 1,5 bis (di-2-pyridyl) methylene thiocarbohydrazide. The main aim of this work was to develop a precise and accurate method for the determination of the Hg. Under the optima conditions and 120 s preconcentration time, the detection limit obtained was 0.009 μg L-1, with RSDs 3.7 % for 0.2 μg L-1, 4.8 % for 1 μg L-1 and enrichment factor 4, Furthermore, the method proposed has permitted the determination of Hg with a reduction in the analysis time, the sample throughput was about 18 h-1, low consumption of reagents and sample volume. The method was applied to the determination of Hg in sea water and river water. For the quality control of the analytical performance and the validation of the newly developed method, the analysis of two certified samples, TMDA 54.4 Fortified Lake, and LGC6187 River sediment was addressed. The results showed good agreement with the certified values.

Extração líquido-líquido em sistemas de fluxo

This review deals with principles of the liquid-liquid extraction, when performed in flow systems. This approach is frequently used for sample treatment to improve the selectivity and/or sensitivity in analytical measurements. The advances in this area are reported, including the use of monosegmented flow systems to perform metal extraction through both two-phase and single phase processes.