Is the OECD acute worm toxicity test environmentally relevant? The effect of mineral form on calculated lead toxicity

In a series of experiments the toxicity of lead to worms in soil was determined following the draft OECD earthworm reproduction toxicity protocol except that lead was added as solid lead nitrate, carbonate and sulphide rather than as lead nitrate solution as would normally be the case. The compounds were added to the test soil to give lead concentrations of 625-12500 pg Pb g-1 of soil. Calculated toxicities of the lead decreased in the order nitrate > carbonate > sulphide, the same order as the decrease in the solubility of the metal compounds used. The 7-day LC50 (lethal concentration when 50% of the population is killed) for the nitrate was 5321 +/- 275 mug Pb g(-1) of soil and this did not change with time. The LC50 values for carbonate and sulphide could not be determined at the concentration ranges used. The only parameter sensitive enough to distinguish the toxicities of the three compounds was cocoon (egg) production. The EC50S for cocoon production (the concentration to produce a 50% reduction in cocoon production) were 993, 8604 and 10 246 mug Pb g(-1) of soil for lead nitrate, carbonate and sulphide, respectively. Standard toxicity tests need to take into account the form in which the contaminant is present in the soil to be of environmental relevance. (C) 2002 Elsevier Science Ltd. All rights reserved.

Origin and evolution of a myxozoan worm

Buddenbrockia pluinatellae is an active, muscular, worm-shaped parasite of freshwater bryozoans. This rare and enigmatic animal has been assigned to the Myxozoa on the basis of 18S ribosomal DNA sequences and the presence of malacosporean spores. Here we report cloning of four homologous protein-coding genes from Buddenbrockia worms, the putatively conspecific sac-shaped parasite originally described as Tetracapsula bryozoides and the related sac-shaped parasite Tetracapsuloides bryosalmonae, the causative agent of proliferative kidney disease in salmonid fish. Analyses are consistent with the hypothesis that Buddenbrockia is indeed a malacosporean myxozoan, but do not provide support for conspecificity with either T. bryozoides or T. bryosalmonae. Implications for the evolution of worm-like body plans in the Myxozoa are discussed.

Buddenbrockia is a Cnidarian worm

A major evolutionary divide occurs in the animal kingdom between the so-called radially symmetric animals, which includes the cnidarians, and the bilaterally symmetric animals, which includes all worm phyla. Buddenbrockia plumatellae is an active, muscular, parasitic worm that belongs to the phylum Myxozoa, a group of morphologically simplified microscopic endoparasites that has proved difficult to place phylogenetically. Phylogenetic analyses of multiple protein-coding genes demonstrate that Buddenbrockia is a cnidarian. This active muscular worm increases the known diversity in cnidarian body plans and demonstrates that a muscular, wormlike form can evolve in the absence of overt bilateral symmetry.

Capillary flow behavior of worm-like micelles studied by small-angle X-ray scattering and small angle light scattering

A novel capillary flow device has been developed and applied to study the orientation of worm-like micelles, among other systems. Small-angle X-ray scattering (SAXS) data from micelles formed by a Pluronic block copolymer in aqueous salt solution provides evidence for the formation of worm-like micelles, which align under flow. A transition from a rod-like form factor to a less persistent conformation is observed under flow. Flow alignment of worm-like micelles formed by the low molar mass amphiphile system cetyl pyridinium chloride+sodium salicylate is studied for comparative purposes. Here, inhomogenous flow at the micron scale is revealed by streaks in the small-angle light scattering pattern perpendicular to the flow direction. Copyright (c) 2006 John Wiley & Sons, Ltd.

The polychaete worm Nereis diversicolor increases mercury lability and methylation in intertidal mudflats

The polychaete worm Nereis diversicolor engineers its environment by creating oxygenated burrows in anoxic intertidal sediments. The authors carried out a laboratory microcosm experiment to test the impact of polychaete burrowing and feeding activity on the lability and methylation of mercury in sediments from the Bay of Fundy, Canada. The concentration of labile inorganic mercury and methylmercury in burrow walls was elevated compared to worm-free sediments. Mucus secretions and organic detritus in worm burrows increased labile mercury concentrations. Worms decreased sulfide concentrations, which increased Hg bioavailability to sulfate-reducing bacteria and increased methylmercury concentrations in burrow linings. Because the walls of polychaete burrows have a greater interaction with organisms, and the overlying water, the concentrations of mercury and methylmercury they contain is more toxicologically relevant to the base of a coastal food web than bulk samples. The authors recommend that researchers examining Hg in marine environments account for sediment dwelling invertebrate activity to more fully assess mercury bioavailability.

Is there any risk in a symbiotic species associating with an endangered one? A case of a phoronid worm growing on a Ceriantheomorphe tube

The conservation of emblematic threatened species is in highlight nowadays. Interestingly, few invertebrate groups attract scientific attention on this issue while they constitute the vast majority of animal biodiversity. Nevertheless, many invertebrate species are nowadays at risk of extinction. This means that plenty of species are currently disappearing out of sight. During a survey in the southwestern Atlantic Ocean tubes of an endangered species of cerianthid were sampled. This study reports for the very first time the occurrence of the species Phoronis australis in southwestern Atlantic waters and the association of phoronids with the genus Ceriantheomorphe. This raises questions on mutual extinction risks for symbiotic species and also on the criteria for their inclusion on Red Lists.

Spatial choice is biased by chemical cues from conspecifics in the speckeled worm eel Myrophis punctatus

A enguia mirongo-mirim Myrophis punctatus vive em agrupamentos de alta densidade populacional e comumente se enterra ou permanece sob o substrato. Esses comportamentos podem levar a marcas químicas no subtrato e podem, portanto, modular o uso do espaço nessa espécie. Neste estudo, testamos a hipótese de que a preferência espacial da enguia mirongo-mirim é influenciada pela presença de odor do animal coespecífico no subtrato. Mostramos que as enguias evitam a área que contém tal odor, indicando que as decisões de ocupação espacial podem ser influenciadas por pistas químicas de coespecíficos. As enguias claramente detectaram o odor de um animal coespecífico e essa percepção poderia ser um indicativo da presença de um coespecífico enterrado no substrato. Visto que elas evitam uma área contendo tal odor, sugerimos que isso poderia ser uma resposta para evitar invadir o território de um animal residente.

Chaunus ictericus (Spix, 1824) as paratenic host of the giant kidney worm Dioctophyme renale (Goeze, 1782) (Nematoda: Enoplida) in Sao Cristovao district, Tres Barras county, Santa Catarina state, Brazil

Dioctophyme renale larvae have been found in cysts in the gastric wall of 5.17% (3/58) Chaunus ictericus specimens from Sao Cristovao district, Tres Barras municipality, Santa Catarina state, Brazil. However, larvae of this nematode were not found in sympatric Chaunus schneideri. The larvae caused a mild granulomatous reaction. This is the first report of paratenic hosts for D. renale in Brazil, and probably is also the first in the Neotropical region. (C) 2009 Elsevier B.V. All rights reserved.

In vitro evaluation of conventional and locking miniplate/screw systems for the treatment of mandibular angle fractures

This in vitro study evaluated the influence of the type of miniplate and the number of screws installed in the proximal and distal segments on the stability and resistance of Champy's osteosynthesis in mandibular angle fractures. Sixty polyurethane hemimandibles with bone-like consistency were randomly assigned to four groups (n = 15) and sectioned in the mandibular angle region to simulate fracture. The bone segments were fixed by different osteosynthesis methods using 2.0 mm miniplates and 2.0 mm x 6 mm rnonocortical screws. In groups 1 and 2, two conventional (G1) or locking (G2) screws were installed in each bone segment using a conventional (G1) or a locking (02) straight miniplate; in groups 3 and 4, three conventional (03) or locking (04) screws were installed in the proximal segment and four conventional (G3) or locking (04) screws were installed in the distal segment using a conventional (G3) or a locking (G4) seven-hole straight miniplate. The hemimandibles were loaded in compressive strength until a 4 mm displacement occurred between the segments, vertically or horizontally. Locking plate/screw systems provided significantly greater resistance to displacement than conventional ones (p < .01). Locking miniplates offered more resistance than conventional miniplates. Long locking miniplates provided greater stability than short ones.

In Vitro Biomechanical Evaluation of the Use of Conventional and Locking Miniplate/Screw Systems for Sagittal Split Ramus Osteotomy

Purpose: The aim of this in vitro study was to assess the biomechanical stability of 9 different osteosynthesis methods after sagittal split ramus osteotomy by simulating the masticatory forces and using a 3-point biomechanical test method.Materials and Methods: Forty-five polyurethane hemimandibles with bone-like consistency were randomly assigned to 9 groups (n = 5) and subjected to sagittal split ramus osteotomy. After 4-mm advancement of the distal segment, the bone segments were fixed by different osteosynthesis methods using 2.0-mm miniplate/screw systems: group A, one 4-hole conventional straight miniplate; group B, one 4-hole locking straight miniplate; group C, one 4-hole conventional miniplate and one bicortical screw; group D, one 4-hole locking miniplate and 1 bicortical screw; group E, one 6-hole conventional straight miniplate; group F, one 6-hole locking straight miniplate; group (3: two 4-hole conventional straight miniplates; group H. two 4-hole locking straight miniplates; and group 1, 3 bicortical screws in an inverted-L. pattern. All models were mounted on a base especially constructed for this purpose. Using a 3-point biomechanical test model, the hemimandibles were loaded in compressive strength in an Instron machine (Norwood, MA) until a 3-mm displacement occurred between segments vertically or horizontally. Data were analyzed by analysis of variance and Tukey test (alpha = 1%).Results: The multiparametric comparison of the groups showed a statistically significant difference (P<.01) between groups that used 2 miniplates (groups G and H), 1 miniplate and 1 bicortical screw (groups C and D), and only bicortical screws (group D compared with groups that used only 1 miniplate with 2 screws per segment (groups A and B) and 3 screws per segment (groups E and F).Conclusion: The placement of 2.0-mm-diameter bicortical screws in the retromolar region, associated or not with conventional and locking miniplates with monocortical screws, promoted a better stabilization of bone segments. Locking miniplates presented a better performance in bone fixation in all groups. (C) 2010 American Association of Oral and Maxillofacial Surgeons J Oral Maxillofac Surg 68:724-730, 2010

Effect of Passive Fit Absence in the Prosthesis/Implant/Retaining Screw System: A Two-Dimensional Finite Element Analysis

The misfit between prostheses and implants is a clinical reality, but the level that can be accepted without causing mechanical or biologic problem is not well defined. This study investigates the effect of different levels of unilateral angular misfit prostheses in the prosthesis/implant/retaining screw system and in the surrounding bone using finite element analysis. Four models of a two-dimensional finite element were constructed: group I (control), prosthesis that fit the implant; groups 2 to 4, prostheses with unilateral angular misfit of 50, 100, and 200 mu m, respectively. A load of 133 N was applied with a 30-degree angulation and off-axis at 2 mm from the long axis of the implant at the opposite direction of misfit on the models. Taking into account the increase of the angular misfit, the stress maps showed a gradual increase of prosthesis stress and uniform stress in the implant and trabecular bone. Concerning the displacement, an inclination of the system due to loading and misfit was observed. The decrease of the unilateral contact between prosthesis and implant leads to the displacement of the entire system, and distribution and magnitude alterations of the stress also occurred.

Effect of Vertical Misfit on Screw Joint Stability of Implant-Supported Crowns

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effectiveness of Screw Surface Coating on the Stability of Zirconia Abutments After Cyclic Loading

Purpose: Different surface treatments have been developed in attempts to prevent the loosening of abutment screws. The aim of the current study was to compare the effectiveness of titanium alloy screws with tungsten-doped diamond-like carbon (W-DLC) coating and uncoated screws in providing stability to zirconia (ZrO2) ceramic abutments after cyclic loading. Materials and Methods: Twenty prefabricated ZrO2 ceramic abutments on their respective external-hex implants were divided into two groups of equal size according to the type of screw used: uncoated titanium alloy screw (Ti) or titanium alloy screw with W-DLC coating (W-DLC/Ti). The removal torque value (preload) of the abutment screw was measured before and after loading. Cyclic loading between 11 and 211 N was applied at an angle of 30 degrees to the long axis of the implants at a frequency of 15 Hz. A target of 0.5 x 10(6) cycles was defined. Group means were calculated and compared using analysis of variance and the F test (alpha=.05). Results: Before cyclic loading, the preload for Ti screws was significantly higher than that for W-DLC/Ti screws (P=.021). After cyclic loading, there was no significant difference between them (P=.499). Conclusions: Under the studied conditions, it can be concluded that, after cyclic loading, both abutment screws presented a significant reduction in the mean retained preload and similar effectiveness in maintaining preload. INT J ORAL MAXILLOFAC IMPLANTS 2012;27:1061-1067

Worm burden and immunological responses in Corriedale and Crioula Lanada sheep following natural infection with Haemonchus contortus

The effects of natural infection with Haemonchus contortus were compared in 15 Corriedale lambs and 18 Crioula Lanada lambs kept in the grazing conditions after weaning. The following parameters were assessed weekly for 9 consecutive weeks: number of eggs per gram of feces (EPG), packed cell volume (PCV), total serum proteins (TSP) and albumin (ALB). At 10 weeks, the animals were slaughtered and autopsied to evaluate to the worm burden and eosinophil, mast cell and globule leukocyte counts in histological sections of the abomasum. EPG counts and worm burden were significantly lower in Crioula lambs, which also showed higher levels of PCV, TSP and ALB, as well as higher eosinophil and globule leukocyte counts. Mast cell counts were similar for the two breeds. These results indicate that, under intensive pasture conditions, the Crioula Lanada breed shows a better response to natural infection with H. contortus, suggesting greater resistance to parasitism. (C) 2003 Elsevier B.V. All rights reserved.