Mesure de la concentration en métaux traces dans la solution de sol par microlysimétrie

La présente étude porte sur l’évaluation d’une méthode d’acquisition de la solution de sol présente à l’interface sol-racine, dans la rhizosphère. Cette interface constitue le lieu privilégié de prise en charge par les plantes des contaminants, tels que les métaux traces. Comme les plantes acquièrent ces éléments à partir de la phase liquide, la solution de sol de la rhizosphère est une composante clé pour déterminer la fraction de métaux traces biodisponibles. La microlysimétrie est la méthode in situ la plus appropriée pour aborder les difficultés liées à l’échelle microscopique de la rhizosphère. Ainsi, dans les études sur la biodisponibilité des métaux traces au niveau de la rhizosphère, les microlysimètres (Rhizon©) gagnent en popularité sans, toutefois, avoir fait l’objet d’études exhaustives. L’objectif de cette étude est donc d’évaluer la capacité de ces microlysimètres à préserver l’intégrité chimique de la solution, tout en optimisant leur utilisation. Pour ce faire, les microlysimètres ont été soumis à une série d’expériences en présence de solutions et de sols, où la quantité de solution prélevée et le comportement des métaux traces (Cd, Cu, Ni, Pb, Zn) ont été étudiés. Les résultats montrent que les microlysimètres fonctionnent de façon optimale lorsque le contenu en eau du sol est au-dessus de la capacité au champ et lorsqu’il y a peu de matière organique et d’argile. Les sols sableux ayant un faible contenu en C organique reproduisent mieux le volume prélevé et la solution sous la capacité au champ peut être récoltée. L’utilisation des microlysimètres dans ces sols est donc optimale. Dans les essais en solution, les microlysimètres ont atteint un équilibre avec la solution après 10 h de prélèvement. En respectant ce délai et les conditions optimales préalablement établies (pH acide et COD élevé), les microlysimètres préservent la composition chimique de la solution. Dans les essais en sol, cet équilibre n’a pas été atteint après dix jours et huit prélèvements. Le contenu en matière organique et l’activité microbienne semblent responsables de la modification des concentrations en métaux au cours de ces prélèvements, notamment, dans l’horizon FH où les microlysimètres performent très mal. En revanche, dans l’horizon B, les concentrations tendent à se stabiliser vers la fin de la série de prélèvements en se rapprochant des valeurs de référence. Bien que des valeurs plus élevées s’observent pour les microlysimètres, leurs concentrations en métaux sont comparables à celles des méthodes de référence (extrait à l’eau, lysimètres de terrain avec et sans tension). En somme, les microlysimètres se comportent généralement mieux dans l’horizon B. Même si leur utilisation est plus optimale dans un sol sableux, cet horizon est privilégié pour de futures études sur le terrain avec les microlysimètres.

Effets des nanoparticules d'argent sur les processus enzymatiques des sols

Les nanomatériaux sont de plus en plus présents dans les produits consommables du quotidien. L’argent est le métal le plus utilisé en nanotechnologie pour ses propriétés antimicrobiennes. Par différentes voies d’entrée, les nanoparticules d’argent (nAg) se retrouvent dans l’environnement en quantité significative, notamment dans les sols suite à la valorisation agricole des biosolides municipaux. Il est prévu qu’une interaction négative sur la communauté microbienne terrestre ait des répercussions sur la fertilité du sol et les processus biogéochimiques. Les mesures de l’activité enzymatique ont déjà montré leur efficacité et leur sensibilité dans la détection d’une perturbation physique et chimique du sol. Les effets potentiels des nAg sur l’écosystème terrestre ont été évalués en mesurant l’activité des enzymes β-D-glucosidase (EC 3.2.1.21), leucine-aminopeptidase (EC 3.4.11.1), phosphomonoesterase (EC 3.1.3) et arylsulfatase (EC 3.1.6.1) intervenant dans les cycles des éléments essentiels C, N, P et S, respectivement. L’activité enzymatique est mesurée à l’aide d’une technique basée sur la fluorescence qui requière des substrats synthétiques liés à un fluorophore. Un sol de type sableux a été échantillonné au Campus Macdonald de l’Université McGill (Sainte-Anne-de-Bellevue, Qc) puis exposé aux nAg (taille ~20 nm) ou à la forme ionique Ag+ (Ag-acetate) à des concentrations nominales de 1,25 × 10-3, 1,25 × 10-2, 0,125, 1,25, 6,25 et 31,25 mg Ag kg-1 sol. De plus, le rôle de la matière organique (MO) a été évalué en effectuant un amendement du sol avec un compost de feuilles. Pour mieux comprendre les effets observés, des analyses de spéciation de l’Ag ont été réalisées. Les concentrations en Ag dissous ont été déterminées après filtration à travers des membranes de 0,45 µm ou de 3 kDa (~1 nm, ultrafiltration) pour séparer la phase particulaire des ions dissous. De façon générale, une inhibition de l’activité enzymatique a été observée pour les 4 enzymes en fonction de l’augmentation de la concentration en Ag (totale et dissoute) mais elle est significativement moins importante avec l’ajout de la MO. Les résultats suggèrent que l’inhibition de l’activité des enzymes aux faibles expositions aux nAg est due aux nanoparticules puisqu’une très faible fraction des nAg est réellement dissoute et aucun effet significatif n’a été observé pour les sols traités à des concentrations similaires en Ag+. Par contre, les effets mesurés aux concentrations plus élevées en nAg sont semblables aux expositions à l’Ag+ et suggèrent un rôle de l’Ag colloïdale dans l’inhibition du processus enzymatique des sols.

Application of biogas slurries from energy crops to arable soils and their impact on carbon and nitrogen dynamics

The use of renewable primary products as co-substrate or single substrate for biogas production has increased consistently over the last few years. Maize silage is the preferential energy crop used for fermentation due to its high methane (CH4) yield per hectare. Equally, the by-product, namely biogas slurry (BS), is used with increasing frequency as organic fertilizer to return nutrients to the soil and to maintain or increase the organic matter stocks and soil fertility. Studies concerning the application of energy crop-derived BS on the carbon (C) and nitrogen (N) mineralization dynamics are scarce. Thus, this thesis focused on the following objectives: I) The determination of the effects caused by rainfall patterns on the C and N dynamics from two contrasting organic fertilizers, namely BS from maize silage and composted cattle manure (CM), by monitoring emissions of nitrous oxide (N2O), carbon dioxide (CO2) and CH4 as well as leaching losses of C and N. II) The investigation of the impact of differences in soil moisture content after the application of BS and temperature on gaseous emissions (CO2, N2O and CH4) and leaching of C and N compounds. III) A comparison of BS properties obtained from biogas plants with different substrate inputs and operating parameters and their effect on C and N dynamics after application to differently textured soils with varying application rates and water contents. For the objectives I) and II) two experiments (experiment I and II) using undisturbed soil cores of a Haplic Luvisol were carried out. Objective III) was studied on a third experiment (experiment III) with disturbed soil samples. During experiment I three rainfall patterns were implemented including constant irrigation, continuous irrigation with periodic heavy rainfall events, and partial drying with rewetting periods. Biogas slurry and CM were applied at a rate of 100 kg N ha-1. During experiment II constant irrigation and an irrigation pattern with partial drying with rewetting periods were carried out at 13.5°C and 23.5°C. The application of BS took place either directly before a rewetting period or one week after the rewetting period stopped. Experiment III included two soils of different texture which were mixed with ten BS’s originating from ten different biogas plants. Treatments included low, medium and high BS-N application rates and water contents ranging from 50% to 100% of water holding capacity (WHC). Experiment I and II showed that after the application of BS cumulative N2O emissions were 4 times (162 mg N2O-N m-2) higher compared to the application of CM caused by a higher content of mineral N (Nmin) in the form of ammonium (NH4+) in the BS. The cumulative emissions of CO2, however, were on the same level for both fertilizers indicating similar amounts of readily available C after composting and fermentation of organic material. Leaching losses occurred predominantly in the mineral form of nitrate (NO3-) and were higher in BS amended soils (9 mg NO3--N m-2) compared to CM amended soils (5 mg NO3--N m-2). The rainfall pattern in experiment I and II merely affected the temporal production of C and N emissions resulting in reduced CO2 and enhanced N2O emissions during stronger irrigation events, but showed no effect on the cumulative emissions. Overall, a significant increase of CH4 consumption under inconstant irrigation was found. The time of fertilization had no effect on the overall C and N dynamics. Increasing temperature from 13.5°C to 23.5°C enhanced the CO2 and N2O emissions by a factor of 1.7 and 3.7, respectively. Due to the increased microbial activity with increasing temperature soil respiration was enhanced. This led to decreasing oxygen (O2) contents which in turn promoted denitrification in soil due to the extension of anaerobic microsites. Leaching losses of NO3- were also significantly affected by increasing temperature whereas the consumption of CH4 was not affected. The third experiment showed that the input materials of biogas plants affected the properties of the resulting BS. In particular the contents of DM and NH4+ were determined by the amount of added plant biomass and excrement-based biomass, respectively. Correlations between BS properties and CO2 or N2O emissions were not detected. Solely the ammonia (NH3) emissions showed a positive correlation with NH4+ content in BS as well as a negative correlation with the total C (Ct) content. The BS-N application rates affected the relative CO2 emissions (% of C supplied with BS) when applied to silty soil as well as the relative N2O emissions (% of N supplied with BS) when applied to sandy soil. The impacts on the C and N dynamics induced by BS application were exceeded by the differences induced by soil texture. Presumably, due to the higher clay content in silty soils, organic matter was stabilized by organo-mineral interactions and NH4+ was adsorbed at the cation exchange sites. Different water contents induced highest CO2 emissions and therefore optimal conditions for microbial activity at 75% of WHC in both soils. Cumulative nitrification was also highest at 75% and 50% of WHC whereas the relative N2O emissions increased with water content and showed higher N2O losses in sandy soils. In summary it can be stated that the findings of the present thesis confirmed the high fertilizer value of BS’s, caused by high concentrations of NH4+ and labile organic compounds such as readily available carbon. These attributes of BS’s are to a great extent independent of the input materials of biogas plants. However, considerably gaseous and leaching losses of N may occur especially at high moisture contents. The emissions of N2O after field application corresponded with those of animal slurries.

Effects of activated charcoal and quebracho tannins on the turnover of goat manure in irrigated organic agriculture of the subtropics

Agriculture in semi-arid and arid regions is constantly gaining importance for the security of the nutrition of humankind because of the rapid population growth. At the same time, especially these regions are more and more endangered by soil degradation, limited resources and extreme climatic conditions. One way to retain soil fertility under these conditions in the long run is to increase the soil organic matter. Thus, a two-year field experiment was conducted to test the efficiency of activated charcoal and quebracho tannin extract as stabilizers of soil organic matter on a sandy soil low in nutrients in Northern Oman. Both activated charcoal and quebracho tannin extract were either fed to goats and after defecation applied to the soil or directly applied to the soil in combination with dried goat manure. Regardless of the application method, both additives reduced decomposition of soil-applied organic matter and thus stabilized and increased soil organic carbon. The nutrient release from goat manure was altered by the application of activated charcoal and quebracho tannin extract as well, however, nutrient release was not always slowed down. While activated charcoal fed to goats, was more effective in stabilising soil organic matter and in reducing nutrient release than mixing it, for quebracho tannin extract the opposite was the case. Moreover, the efficiency of the additives was influenced by the cultivated crop (sweet corn and radish), leading to unexplained interactions. The reduced nutrient release caused by the stabilization of the organic matter might be the reason for the reduced yields for sweet corn caused by the application of manure amended with activated charcoal and quebracho tannin extract. Radish, on the other hand, was only inhibited by the presence of quebracho tannin extract but not by activated charcoal. This might be caused by a possible allelopathic effect of tannins on crops. To understand the mechanisms behind the changes in manure, in the soil, in the mineralisation and the plant development and to resolve detrimental effects, further research as recommended in this dissertation is necessary. Particularly in developing countries poor in resources and capital, feeding charcoal or tannins to animals and using their faeces as manure may be promising to increase soil fertility, sequester carbon and reduce nutrient losses, when yield reductions can be resolved.

Development of mechanical methods for cell-tray propagation and field transplanting of dwarf napiergrass (Pennisetum purpureum Schumach.)

Since dwarf napiergrass (Pennisetum purpureum Schumach.) must be propagated vegetatively due to lack of viable seeds, root splitting and stem cuttings are generally used to obtain true-to-type plant populations. These ordinary methods are laborious and costly, and are the greatest barriers for expanding the cultivation area of this crop. The objectives of this research were to develop nursery production of dwarf napiergrass in cell trays and to compare the efficiency of mechanical versus manual methods for cell-tray propagation and field transplanting. After defoliation of herbage either by a sickle (manually) or hand-mowing machine, every potential aerial tiller bud was cut to a single one for transplanting into cell trays as stem cuttings and placed in a glasshouse over winter. The following June, nursery plants were trimmed to a 25–cm length and transplanted in an experimental field (sandy soil) with 20,000 plants ha^(−1) either by shovel (manually) or Welsh onion planter. Labour time was recorded for each process. The manual defoliation of plants required 44% more labour time for preparing the stem cuttings (0.73 person-min. stemcutting^(−1)) compared to using hand-mowing machinery (0.51 person-min. stem-cutting^(−1)). In contrast, labour time for transplanting required an extra 0.30 person-min. m^(−2) (14%) using the machinery compared to manual transplanting, possibly due to the limited plot size for machinery operation. The transplanting method had no significant effect on plant establishment or plant growth, except for herbage yield 110 days after planting. Defoliation of herbage by machinery, production using a cell-tray nursery and mechanical transplanting reduced the labour intensity of dwarf napiergrass propagation.

Characterization by Fluorescence of Organic Matter from Oxisols under Sewage Sludge Applications

Sewage sludge from wastewater treatment contains organic matter and plant nutrients that can play an important role in agricultural production and the maintenance of soil fertility, The present study has aimed to evaluate the degree of humification following sewage sludge application of soil organic matter by laser-induced fluorescence and humic acids using ultraviolet-visible fluorescence, and including comparison with Fourier-transform infrared spectroscopy and elemental analysis. Sewage sludge applications to the soil caused a decrease in the degree of humification of the soil organic matter and humic acids for both a Typic Eutrorthox (clayey) soil and a Typic Haplorthox (sandy) soil of around 14 and 27%, respectively. This effect is probably clue to incorporation of newly formed humic substances from the sewage sludge into the characteristics of less humified material, and to the indigenous soil humic substances. The minor alterations observed in the clay soil probably occurred due to both the greater mineral association, which better stabilized the indigenous soil organic matter, and the higher microbial activity in this soil, which accelerated sewage sludge mineralization. Sewage sludge applications increased the C content for the clay and sandy soils by 7.4 and 15.4 g kg(-1), respectively, suggesting a positive effect on these two soils.

Consequências da deriva de clomazone e sulfentrazone em clones de E. grandis x E. urophylla

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Resposta de brócolis, couve-flor e repolho à adubação com boro em solo arenoso

Foram avaliados em condições de campo, em solo arenoso, com baixo teor de boro, os efeitos da adubação com cinco doses de boro (0; 2; 4; 6 e 8 kg ha-1 de B na forma de bórax) na produção de brócolis, couve-flor e repolho. O experimento obedeceu a um esquema fatorial com delineamento experimental de blocos ao acaso com três repetições. As adubações orgânica e química, inclusive o bórax, foram feitas no sulco antes do transplantio das mudas e a colheita foi feita entre 63 e 93 dias após o transplantio. A produtividade de brócolis variou de 16,9 a 20,5 t ha-1; a de couve-flor de 21,6 a 29,6 t ha-1 e a de repolho de 40,5 a 46,4 t ha-1. O aumento observado na produtividade de brócolis e de repolho foi linear e o efeito das doses de boro na produtividade de couve-flor foi quadrático, sendo necessários 5,1 kg ha-1 de B para atingir a produtividade máxima de 30 t ha-1. Brócolis e repolho mostraram-se menos sensíveis do que a couve-flor tanto à deficiência quanto ao excesso de boro. No caso da couve-flor, com a aplicação de 2 kg ha-1 ou de 6 kg ha-1 de B houve significativa perda de qualidade do produto.

Controle de plantas daninhas em cana-de-açúcar (Saccharum officinarum) com hexazinone e suas misturas com diuron, em pré-emergência

Foi realizado no ano agrícola 1976/77 um experimento em solo arenoso na Usina Utinga/LeãoAL, no qual foram testados em pré-emergência os tratamentos: hexazinone em 4 doses; hexazinone + diuron em 3 doses; diurom + 2,4 D amina e ametrina + 2,4 D amina. Aos 47, 78 e 111 dias, efetuaram-se as avaliações de fitotoxicidade à cana-de-açúcar e controle à Digitaria sanguinalis , Colopogonio sp, Paspalum distichum e Wedellia paludosa. A interpretação dos dados obtidos mostrou que os tratamentos com hexazinone (954 g/ha) e hexazinone (719 g/ha) + diuron (2048 g/ha) apresentaram diferença estatística em relação à produção quando comparadas à testemunha, além de serem eficientes no controle às plantas daninhas presentes no experimento. Nenhum tratamento prejudicou as qualidades tecnológicas da cana-de-açúcar.

Selectivity of the herbicide flazasulfuron applied after postemergence in sugarcane (Saccharum spp. L.) crop

The selectivity of the herbicide flazasulfaron was evaluated when applied at two rates (50 and 100 g/ha) with and without surfactants (Aterbane or Agral at 0.2% v/v). The treatment was applied at early (three leaves) and late (five to six leaves) stages of the postemergence of sugarcane plants (var. RB845257) grown in two soils (sandy and clay) with good moisture status before and after application. Despite the toxicity symptoms, especially at the late stage with the higher rate of application in the sandy soil, the herbicide did not affect the growth nor the stalk yield. The presence of the surfactants had no effect on the toxicity symptoms.

Frações de zinco em solo arenoso e suas relações com disponibilidade para Cynodon spp cv. Tifton-85

Para avaliar um esquema de fracionamento de zinco em Argissolo arenoso e suas relações com a disponibilidade de Zn para Cynodon spp cv. Tifton-85, realizou-se um experimento em casa de vegetação, em esquema fatorial 5 x 2 x 2 (5 doses de Zn, 2 doses de calcário e 2 épocas de amostragem), em delineamento inteiramente casualizado, com três repetições. As doses de Zn foram de 0; 2,5; 5,0; 7,5 e 10 mg dm-3; metade dos vasos não recebeu calagem (V = 42 %) e metade recebeu a calagem com vistas em elevar o índice de saturação por bases a 70 %. As épocas de amostragem foram 30 e 150 dias após aplicação de Zn, respectivamente, antes do plantio e depois do 3º corte de Tifton-85. A aplicação de Zn resultou em aumento significativo do elemento nas frações: trocável, óxidos de Mn, matéria orgânica e óxidos de Fe. O Zn ligado aos óxidos de Mn aumentou significativamente com a calagem. Após 150 dias de experimentação, houve diminuição do Zn trocável, ligado aos óxidos de Mn, à matéria orgânica e aos óxidos de Fe, e aumento na fração residual. A distribuição de Zn nas frações do solo foi: residual > óxidos de Fe > óxidos de Mn > trocável > matéria orgânica. As relações entre as características estudadas mostraram que tanto o Zn-DTPA quanto o Zn trocável, ligado à M.O. e aos óxidos de Mn, foram eficientes para representar o Zn absorvido pela planta.

Estresse hídrico em plantio de Eucalyptus grandis vs. Eucalyptus urophylla, em função do solo, substrato e manejo hídrico de viveiro

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Manejo hídrico em viveiro e uso de hidrogel na sobrevivência pós-plantio de Eucalyptus urograndis em dois solos diferentes

O trabalho teve como objetivo avaliar a sobrevivência do clone H13 de Eucalyptus urograndis sob dois manejos hídricos de viveiro, plantados em dois solos, com e sem a adição de polímero hidroabsorvente (hidrogel). O plantio foi realizado em vasos mantidos em estufa, com dois tipos de solo: um arenoso e outro argiloso. Cada vaso recebeu 2,5 L de solo, um litro de água e o hidrogel na proporção de 0,4 g vaso-1 (120 mL de gel). O delineamento experimental adotado foi o inteiramente casualizado, com três repetições. Os sintomas de estresse, nos vários níveis avaliados, sempre se manifestaram primeiro nas plantas no solo argiloso, de modo mais acentuado naquelas que foram mantidas sem estresse de água na fase de viveiro. Isso garantiu que as plantas sobrevivessem por um período menor sem água, variando de 14 a 20 dias (com e sem hidrogel, respectivamente), enquanto, no solo arenoso, a sobrevivência foi maior, de 29 a 34 dias (com e sem hidrogel, respectivamente). Apesar da não significância estatística, os resultados com o hidrogel possibilitam, em ambos os solos, maior flexibilidade operacional na intervenção com novas irrigações.

Propagação vegetativa da alfavaca-cravo utilizando diferentes tipos de estacas e substratos

A propagação vegetativa é considerada importante ferramenta para o melhoramento de espécies lenhosas e herbáceas e vem sendo amplamente utilizada, visando melhorar e manter variedades de importância econômica e medicinal. Neste contexto utilizou-se estacas de alfavaca-cravo de 15 cm para apicais e 25 cm para as medianas, sendo estas com e sem folhas. As estacas foram plantadas em bandejas de isopor de 72 células, utilizando-se 10 substratos. Após 35 dias, as estacas foram retiradas com cuidado, sendo as partes aéreas e radiculares separadas e acondicionadas em saco de papel e mantidas em estufa a 70ºC por 48 h para posterior avaliação da matéria seca. Analisou-se a percentagem de enraizamento, número de folhas na estaca, peso de matéria seca de folha e de raiz. Não houve interação significativa entre os diferentes tipos de substrato e estaca para percentagem de enraizamento, sendo que os substratos de modo geral diferiram pouco entre si. Entre os tipos de estaca destacaram-se para esta variável a mediana sem folha e a apical com folha. Para as demais variáveis houve interação significativa entre o tipo de estaca e o substrato. A melhor estaca foi a mediana sem folhas plantadas em substrato arisco + esterco + húmus e vermiculita nas seguintes proporções: 20%:40%:40%; 40%:20%:40% e 40%:40%.

Lixiviação de potássio em função da textura e da disponibilidade do nutriente no solo

O manejo correto da adubação potássica pode minimizar perdas assim como evitar o esgotamento de K do solo. Objetivou-se estudar a dinâmica do K no perfil do solo em função do teor de argila e do teor do nutriente resultantes da adubação da soja. Foram coletados solos de texturas média e argilosa, que vinham sendo adubados com 0, 60, 120, e 180 kg ha-1 de K2O na soja por 6 anos. O experimento foi conduzido em casa de vegetação, em tubos de PVC estratificados nas profundidades de 0-5, 5-10, 10-20, e 20-40 cm. Na superfície das colunas, aplicaram-se mais 80 kg ha-1 de K2O. Durante 16 semanas, foi aplicada, semanalmente, água em quantidade equivalente a 100 mm de chuva. em cada aplicação, o volume de solução percolada foi determinado, assim como as quantidades de K contidas nessa solução. Após a desmontagem das colunas de solo, foram determinados os teores de K trocável e não-trocável nas diferentes profundidades. A percolação de K foi maior no solo de textura argilosa, que tinha mais K disponível devido ao maior efeito residual da adubação potássica anterior. A intensidade de lixiviação foi proporcional ao teor de K disponível, mas inicialmente a lixiviação foi mais intensa no solo mais arenoso, decrescendo com o tempo. No argiloso, as perdas foram mais constantes. Houve proporcionalidade entre teor inicial e lixiviação no perfil do solo, nas duas formas de K e nos dois tipos de solo. Conclui-se que o efeito residual da adubação potássica aumentou as quantidades de K percolado. A movimentação de K no perfil do solo teve boa relação com o teor inicial de K no solo, resultante da adubação potássica anterior nos dois tipos de solo. A passagem de K considerado não-trocável para trocável foi rápida e influenciou na lixiviação.