Co-digestão anaeróbia de dejetos de suínos, níveis de inclusão de óleo de descarte e microrganismos lipolíticos redução do impacto ambiental

The objective of this work for evaluating the potential of biogas and methane productions and still and reductions in levels of total solids (TS), volatile solids (VS) and neutral detergent fiber (NDF) of the co-digestion anaerobic digestion in digesters fed with swine manure plus disposal of oil and lyophilized microorganisms. For assay development substrates were prepared containing 4% TS, consisting of swine manure, disposal oil (the proportions 8, 10 and 12% oil content in relation to the substrate TS), lyophilized microorganisms (Biol-2000 ® - concentrations of 10 g/m3 and 15 g/m3 ), water for dilution of this waste and inoculum for batch digesters supply. There was no significant difference with respect to reductions in TS, VS and NDF constituents, providing very significant reductions in average 54.14; 62.79 and 49.16% respectively. Regarding the potential of biogas production, the highest yields occurred in digesters supplied with 10% oil and 15 g/m3 of Biol®, being 0.43 and 0.54 L of biogas per kg of TS and VS added, respectively, similar results were found when assessed the potential for methane production, with higher values (0.22 and 0.27 L of methane per kg of TS added and VS, respectively) obitidos the same treatment. The inclusion of 15 g/m3 in Biol® substrate composition containing swine manure and 10% of oil improves the yields of biogas and methane.

Efeito da modificação atmosférica em goiabas var. Paluma na redução de danos mecânicos em pós-colheita

In the postharvest management, the fruits can be exposed to injuries that depreciated the quality and the shelf life. Thus, it was evaluated the modified atmosphere effects on guavas var. Paluma subjected to different mechanical damages. Once harvested, the fruits were selected, sanitized and submitted to the treatments T1 (control) - without injuries or packaging in bags of low density polyethylene (LDPE); T2 - without injuries + LDPE bags; T3 - damage by fall of 1 m + LDPE bags; T4 - damage by compression of 9 N + LDPE bags; T5 - damage by fall of 1 m + damage by compression of 9 N + LDPE bags and T6 - damage by fall of 1 m + damage by compression of 9 N without LDPE bags. The treatments were kept in cold storage at 10 ± 1 o C and 94 ± 2% de R.H. The analysis of CO2/ethylene production, enzymatic activity, total and soluble pectins, pulp firmness, titratable acidity (TA), soluble solids (SS), reducing sugars and ascorbic acid were performed every 10 days of refrigeration, and an additional day outside cold storage (22 ± 1o C and 75 ± 3% R.H.) for 30 days. Guavas packed in LDPE bags, not subject to mechanical damage, presented the best quality standards. The fruits suffered only one kind of damage, when packaged, presented satisfactory pattern compared to the fruits without package and not exposed to any mechanical damages. Applying the two kinds of damages, the LDPE packaging was not adequate to decrease the metabolic rate of these fruits, making them unfit for marketing.

Análise de misturas solo-agregado reciclados de resíduos sólidos da construção civil, para fins de pavimentação de vias urbanas de baixo volume de tráfego

This work deals with the continuation of Scientific Initiation research initiated by Tamura (2012), which draws up a mixture of soil and recycled aggregate analysis for paving of low traffic volume roads using local materials from the Vale do Paraíba region. The main steps of the process were the soil and recycled aggregate characterization, along with grading tests and California Bearing Ratio (CBR) applied to the soil, the recycled aggregate and the mixture of soil and recycled aggregate; aiming their use as base and sub-base in paving urban roads. The results are discussed, emphasizing the mechanical behavior. The current results are compared with the results of IC Tamura research, taking decisions over this job to the final product best result. For a greater understanding of the work in general were described paving, its structure, its components and its physical behavior. It has been intended to emphasize the importance of the mixture of soil and recycled aggregate to meet the quality requirements and compliance with the specifications of current technical standards, in the context of durability, natural materials economy, decreases volume in landfills and cost reduction

Melhorando os resultados do transplante renal. Medidas comportamentais na redução da não adesão: estudo prospectivo controlado

Pós-graduação em Fisiopatologia em Clínica Médica - FMB

Análise de misturas solo-agregado reciclados de resíduos sólidos da construção civil, para fins de pavimentação de vias urbanas de baixo volume de tráfego

This work deals with the continuation of Scientific Initiation research initiated by Tamura (2012), which draws up a mixture of soil and recycled aggregate analysis for paving of low traffic volume roads using local materials from the Vale do Paraíba region. The main steps of the process were the soil and recycled aggregate characterization, along with grading tests and California Bearing Ratio (CBR) applied to the soil, the recycled aggregate and the mixture of soil and recycled aggregate; aiming their use as base and sub-base in paving urban roads. The results are discussed, emphasizing the mechanical behavior. The current results are compared with the results of IC Tamura research, taking decisions over this job to the final product best result. For a greater understanding of the work in general were described paving, its structure, its components and its physical behavior. It has been intended to emphasize the importance of the mixture of soil and recycled aggregate to meet the quality requirements and compliance with the specifications of current technical standards, in the context of durability, natural materials economy, decreases volume in landfills and cost reduction

Melhorando os resultados do transplante renal. Medidas comportamentais na redução da não adesão: estudo prospectivo controlado

Pós-graduação em Fisiopatologia em Clínica Médica - FMB

Resíduos sólidos urbanos: impactos socioambientais e perspectiva de manejo sustentável com inclusão social

Com a Rio+20 retoma-se a discussão de estratégias para conciliar desenvolvimento com proteção dos ecossistemas. Um tema apenas tangenciado nessas discussões é o gerenciamento dos resíduos sólidos urbanos. Diante da institucionalização da Política Nacional de Resíduos Sólidos, busca-se contribuir para esse debate, bem como apontar caminhos para o enfrentamento dessa questão, privilegiando a inclusão social. Para isso, foram utilizados documentos e informações sobre a gestão de resíduos sólidos, e a literatura científica especializada. Observa-se que o inadequado gerenciamento dos resíduos sólidos gera impactos imediatos no ambiente e na saúde, assim como contribui para mudanças climáticas. Considerando as limitações das opções de destinação final para os resíduos, é imprescindível minimizar as quantidades produzidas por meio da redução, reutilização e reciclagem. Nesse contexto, destaca-se o papel dos catadores, que vêm realizando um trabalho de grande importância ambiental. Dadas as fragilidades desse segmento populacional, é preciso delinear políticas públicas que tornem a atividade de catação mais digna e com menos riscos e que, ao mesmo tempo, garantam renda, para assim caminhar rumo a um desenvolvimento mais saudável, justo e sustentável.

Gerenciamento integrado de resíduos sólidos: estudo de caso no Instituto Butantan

A relevância do gerenciamento de resíduos sólidos justifica-se pelos impactos à saúde e ao meio ambiente. Resíduos gerados em serviços de saúde podem apresentar periculosidade por suas características físico-químicas e biológicas. No Brasil, todo grande gerador é obrigado a elaborar o Plano de Gerenciamento de Resíduos Sólidos, e todo estabelecimento de saúde deve criar o Plano de Gerenciamento de Resíduos de Serviços de Saúde. Objetivo: Desenvolver modelo de gestão de resíduos sólidos para apoiar a elaboração e implantação desses planos em instituições públicas de pesquisa, desenvolvimento e fabricação de produtos de saúde. Métodos: Estudo de caso conduzido no Instituto Butantan, localizado no município de São Paulo/SP. Foi realizado considerando as seguintes etapas: diagnóstico do gerenciamento dos resíduos e elaboração, implantação e avaliação de Plano Integrado de Gerenciamento de Resíduos Sólidos. Todo o processo teve como abordagem a gestão participativa, compartilhada e integrada, envolvendo todos os atores da instituição. Na avaliação foram considerados o atendimento legal quanto à gestão e gerenciamento, às práticas e procedimentos implantados e à atuação dos envolvidos. Resultados: Destacam-se a caracterização e quantificação para cada fluxo de resíduos, a elaboração do Guia Prático de Descarte de Resíduos, o Modelo de Gestão para instituições de pesquisa, desenvolvimento e fabricação de produtos de uso em saúde humana baseado nas premissas do ciclo PDCA e o sistema informatizado de gerenciamento para estruturação e controle da gestão dos resíduos. Conclusões: Verifica-se que o processo desenvolvido ao longo do estudo propiciou mudança de cultura, envolvimento dos funcionários por meio da capacitação contínua para atuação e segurança do trabalhador e melhoria no gerenciamento dos resíduos, promovendo a redução de custos de destinação e a valorização dos resíduos.

Aspectos técnicos e ambientais da incineração de resíduos sólidos urbanos: considerações sobre a proposta para São Paulo

A tecnologia de incineração no gerenciamento de resíduos sólidos urbanos é empregada de maneira intensa em diversos países do mundo. No Brasil, além da sua utilização eventual em resíduos de serviços de saúde, há uma proposta para implantação de duas usinas de grande porte visando ao tratamento térmico de resíduos sólidos domiciliares na cidade de São Paulo. Através de uma revisão bibliográfica sobre o tema, são apresentados os principais parâmetros técnicos e ambientais desta tecnologia, entre eles os mecanismos de combustão e de formação de poluentes, os tipos de equipamentos empregados, as formas de manejo e disposição de cinzas e escórias e os métodos de controle e redução de emissões atmosféricas como gases ácidos, material particulado e metais pesados. Também é feita uma revisão do atual conhecimento técnico-científico sobre dioxinas e furanos relativamente à incineração de resíduos sólidos urbanos. A partir desta base teórica pesquisada e da análise dos Estudos de Impacto Ambiental e dos Relatórios de Impacto Ambiental das usinas de incineração de Santo Amaro e Sapopemba, conclui-se que tais incineradores, na forma como são propostos, não apresentam o nível tecnológico necessário para atender às normas de operação e emissão de poluentes vigentes em países onde há legislação regulando esta atividade.

Transportadores sólidos de oxigênio à base de níquel e cobre suportados em aluminatos para combustão do metano pela tecnologia de recirculação química

In recent years, solid carriers suitable oxygen have been developed for use in different chemical processes recirculation. The success of this technology is directly related to the chemical reactivity and the oxygen storage capacity of the carrier. Thus, research into the development of new materials that can be applied to the process becomes extremely important. Possible candidates are the carriers based on nickel and copper for presenting favorable thermodynamic properties. In this work, aluminates type MAl2O4 (M = Mg and Ca) and M0,9B0,1Al2O4 (B = Ni and Cu) that are used as supports were synthesized by combustion reactions assisted by microwave and calcined at 900°C/2h. Then, the carriers were impregnated with 10% (m/m) of nickel or copper, and subsequently calcined at 600°C/2h to obtain the solid oxygen carriers, which were characterized by X-ray diffraction (XRD) Microscopy scanning electron microscopy (SEM) and temperature programmed reduction (TPR). Reactions simulating the combustion process by chemical recirculation were performed by cycles reduction/oxidation, in order to evaluate the reactivity of carriers. XRD analysis revealed diffraction peaks of the spinel type structures. In the doped substrates were verified the presence of secondary phases, suggesting that all the metal was incorporated into the spinel structure. In solid oxygen carriers, the NiO and CuO phases were observed after impregnation of active phases on different media. The results of evaluations of chemical cycles reduction/oxidation revealed that TSO's impregnated with nickel in various media were more active and are potential candidates for use in the chemical recirculation technology

Gestão de resíduos sólidos domiciliares na cidade de Chibuto, província de Gaza Moçambique

This study analyzes the process of generation and management of solid waste in the Municipality of the City of Chibuto-Mozambique, drawing on the different approaches towards allocation and the socio-environmental implications resulting from this process and waste spatial distribution. To answer these objectives a questionnaire was administered to 367 households distributed in 14 neighborhoods of the city to elicit information on how solid waste is treated and what could be its impact on public health of the residents. From this perspective, the questionnaire gasp information from immigrant residents regarding both their origin, and socio economic condition. Apart from the questionnaire, semi-structured interviews were conducted to staff working on the Sanitation Sector, Urbanization Sector of the Chibuto Municipality, including the Health Service, and Women and Social Affairs. In addition to these data collection methods, for further discussion on the subject, the researcher draw a theoretical framework grounded through literature review, as well as systematic observation of the phenomenon. Research findings revealed that the solid waste collection services provided by the Chibuto Municipality do not follow the procedures laid down in the Regulation on Solid Waste Management, which advocates environmentally safe, sustainable, and complete management of waste. First, the services use open dumps for waste management. Secondly, waste collection does not cover all citizens living in the neighborhoods governed by the municipality, due to financial, technical, and organizational reasons. More importantly, the study found that due to this failure, more than 90% of households surveyed continue to use the traditional methods on waste management which include burning, or the burial techniques. On the other hand, some citizens throw waste on the streets, a method that threatens public health because it increases cases of diseases related to sanitation problems such as (diarrhea and malaria), especially in suburban and peripheral urban areas. Concerning with the above mentioned problems which constitute a real threat to the public health, some ways are proposed for more sustainable and spatially appropriate solid waste management through recycling, waste sorting, composting, reuse, and reduction of solid waste generation.

Efeito da concentração de sólidos e de variáveis operacionais no desempenho de um hidrociclone concentrador

The hydrocycloning operation has a goal to separate solid-liquid suspensions and liquid-liquid emulsions through the centrifugal force action. Hydrocyclones are equipment with reduced size and used in both clarification and thickening. This device is used in many areas, like petrochemical and minerals process, and accumulate advantages like versatility and low cost of maintenance. However, the demand to improve the process and to reduce the costs has motivated several studies of equipment optimization. The filtering hydrocyclone is a non-conventional equipment developed at FEQUI/UFU with objective to improve the hydrocycloning separation efficiency. The purpose of this study is to evaluate the operating conditions of feed concentration and underflow diameter on the performance of a filtering geometry optimized to minimization of energy costs. The filtration effect was investigated through the comparison between the performance of the Optimized Filtering Hydrocyclone (HCOF) and the Optimized Concentrator Hydrocyclone (HCO). Because of the resemblance of hydrocyclones performance, the filtration did not represent significant effect on the performance of the HCOF. It was found that in this geometry the decrease of the variable underflow diameter was very favorable to thickening operation. The suspension concentration of quartzite at 1.0% of solids in volume was increased about 42 times when the 3 mm underflow diameter was used. The increase on the feed solid percentage was good for decreasing the energy spent, so that a minimum number of Euler of 730 was achieved at CVA = 10.0%v. However, a greater amount of solids in suspension leads to a lower efficiency of the equipment. Therefore, to minimize the underflow-to-throughput ratio and keep a high efficiency level, it is indicated to work with dilute suspension (CVA = 1.0%) and 3 mm underflow diameter (η = 67%). But if it is necessary to work with high feed concentration, the use of 5 mm underflow diameter provides a rise in the efficiency. The HCO hydrocyclone was compared to the traditional family of hydrocyclones Rietema and presented advantages like higher efficiency (34% higher in average) and lower energy costs (20% lower in average). Finally, the efficiency curves and project equation have been raised for the HCO hydrocyclone each with satisfactory adjust.

Síntese e caracterização de NiO-CGO para anodo e eletrólitos sólidos e base de Céria para SOFC

The direct use of natural gas makes the Solid Oxide Fuel Cell (SOFC) potentially more competitive with the current energy conversions technologies. The Intermediate Temperature SOFC (IT-SOFC) offer several advantages over the High Temperature SOFC (HT-SOFC), which includes better thermal compatibility among components, fast start with lower energy consumption, manufacture and operation cost reduction. The CeO2 based materials are alternatives to the Yttria Stabilized Zirconia (YSZ) to application in SOFC, as they have higher ionic conductivity and less ohmic losses comparing to YSZ, and they can operate at lower temperatures (500-800°C). Ceria has been doped with a variety of cations, although, the Gd3+ has the ionic radius closest to the ideal one to form solid solution. These electrolytes based in ceria require special electrodes with a higher performance and chemical and termomechanical compatibility. In this work compounds of gadolinia-doped ceria, Ce1-xGdxO2-δ (x = 0,1; 0,2 and 0,3), used as electrolytes, were synthesized by polymeric precursors method, Pechini, as well as the composite material NiO - Ce0,9Gd0,1O1,95, used as anode, also attained by oxide mixture method, mixturing the powders of the both phases calcinated already. The materials were characterized by X ray diffraction, dilatometry and scanning electronic microscopy. The refinement of the diffraction data indicated that all the Ce1-xGdxO2-δ powders were crystallized in a unique cubic phase with fluorite structure, and the composite synthesized by Pechini method produced smaller crystallite size in comparison with the same material attained by oxide mixture method. All the produced powders had nanometric characteristics. The composite produced by Pechini method has microstructural characteristics that can increase the triple phase boundaries (TPB) in the anode, improving the cell efficiency, as well as reducing the mass transport mechanism effect that provokes anode degradation

Análise de tensões em materiais sólidos de espumas de poliuretano rígidas sob furação

Em diferentes áreas da medicina existem processos cirúrgicos que envolvem a furação de tecido ósseo, dependendo o seu sucesso da conjugação de diversos parâmetros. A previsão e o controlo dos parâmetros envolvidos são fundamentais para a redução do dano no tecido ósseo. Este trabalho de investigação tem como objetivo avaliar o estado de tensão gerado durante o processo de furação utilizando materiais sólidos de espumas de poliuretano rígidas com características similares ao osso humano. Durante a furação dos materiais sólidos são utilizados métodos experimentais, baseados na extensometria e na termografia, para análise das deformações e da temperatura na broca. Os parâmetros envolvidos na furação são a velocidade de rotação e a geometria da broca constantes em diferentes testes, sendo variável a velocidade de avanço. Em simultâneo, foi desenvolvido um modelo numérico de formulação explícita, com recurso ao método de elementos finitos, através do programa LS-DYNA. Os resultados permitem obter o campo de tensões nos materiais sólidos em função dos diferentes parâmetros de furação. Para a mesma velocidade de rotação e geometria da broca, a diminuição na velocidade de avanço provoca o aumento do nível de tensão. Em relação à resistência mecânica da espuma de poliuretano rígida utilizada, e para a zona de medição instrumentada, não há registo de dano material. O dano é provocado na zona de furação pela remoção do material.

Gestão sustentável de resíduos sólidos em grandes eventos : Rio+20 e jogos olímpicos de Londres

Dissertação (mestrado)—Universidade de Brasília, Centro de Desenvolvimento Sustentável, 2015