Identifying Decisive Features for Distinctive Analysis of Writings in Malayalam

This paper presents a writer identification scheme for Malayalam documents. As the accomplishment rate of a scheme is highly dependent on the features extracted from the documents, the process of feature selection and extraction is highly relevant. The paper describes a set of novel features exclusively for Malayalam language. The features were studied in detail which resulted in a comparative study of all the features. The features are fused to form the feature vector or knowledge vector. This knowledge vector is then used in all the phases of the writer identification scheme. The scheme has been tested on a test bed of 280 writers of which 50 writers having only one page, 215 writers with at least 2 pages and 15 writers with at least 4 pages. To perform a comparative evaluation of the scheme the test is conducted using WD-LBP method also. A recognition rate of around 95% was obtained for the proposed approach

Improving an inverse model of sheet metal forming by neural network based regression

An inverse model for a sheet meta l forming process aims to determine the initial parameter levels required to form the final formed shape. This is a difficult problem that is usually approached by traditional methods such as finite element analysis. Formulating the problem as a classification problem makes it possible to use well established classification algorithms, such as decision trees. Classification is, however, generally based on a winner-takes-all approach when associating the output value with the corresponding class. On the other hand, when formulating the problem as a regression task, all the output values are combined to produce the corresponding class value. For a multi-class problem, this may result in very different associations compared with classification between the output of the model and the corresponding class. Such formulation makes it possible to use well known regression algorithms, such as neural networks. In this paper, we develop a neural network based inverse model of a sheet forming process, and compare its performance with that of a linear model. Both models are used in two modes, classification mode and a function estimation mode, to investigate the advantage of re-formulating the problem as a function estimation. This results in large improvements in the recognition rate of set-up parameters of a sheet metal forming process for both models, with a neural network model achieving much more accurate parameter recognition than a linear model.

Vehicle detection and classification by measuring and processing magnetic signal

This paper presents novel vehicle detection and classification method by measuring and processing magnetic signal based on single micro-electro- mechanical system (MEMS) magnetic sensor. When a vehicle moves over the ground, it generates a succession of impacts on the earth's magnetic field, which can be detected by single magnetic sensor. The magnetic signal measured by the magnetic sensor is related to the moving direction and the type of the vehicle. Generally, the recognition rate using single sensor detector is not high. In order to improve the recognition rate, a novel feature extraction algorithm and a novel vehicle classification and recognition algorithm are presented. The concavity and convexity areas, and the angles of concave and convex parts of the waveform are extracted. An improved support vector machine (ISVM) classifier is developed to perform vehicle classification and recognition. The effectiveness of the proposed approach is verified by outdoor experiments.

Optimum-Path Forest Classifier for Large Scale Biometric Applications

This paper addresses biometric identification using large databases, in particular, iris databases. In such applications, it is critical to have low response time, while maintaining an acceptable recognition rate. Thus, the trade-off between speed and accuracy must be evaluated for processing and recognition parts of an identification system. In this paper, a graph-based framework for pattern recognition, called Optimum-Path Forest (OPF), is utilized as a classifier in a pre-developed iris recognition system. The aim of this paper is to verify the effectiveness of OPF in the field of iris recognition, and its performance for various scale iris databases. The existing Gauss-Laguerre Wavelet based coding scheme is used for iris encoding. The performance of the OPF and two other - Hamming and Bayesian - classifiers, is compared using small, medium, and large-scale databases. Such a comparison shows that the OPF has faster response for large-scale databases, thus performing better than the more accurate, but slower, classifiers.

Fusão de métodos baseados em minúcias e em cristas para reconhecimento de impressões digitais

Pós-graduação em Ciência da Computação - IBILCE

Network-based high level data classification

Traditional supervised data classification considers only physical features (e. g., distance or similarity) of the input data. Here, this type of learning is called low level classification. On the other hand, the human (animal) brain performs both low and high orders of learning and it has facility in identifying patterns according to the semantic meaning of the input data. Data classification that considers not only physical attributes but also the pattern formation is, here, referred to as high level classification. In this paper, we propose a hybrid classification technique that combines both types of learning. The low level term can be implemented by any classification technique, while the high level term is realized by the extraction of features of the underlying network constructed from the input data. Thus, the former classifies the test instances by their physical features or class topologies, while the latter measures the compliance of the test instances to the pattern formation of the data. Our study shows that the proposed technique not only can realize classification according to the pattern formation, but also is able to improve the performance of traditional classification techniques. Furthermore, as the class configuration's complexity increases, such as the mixture among different classes, a larger portion of the high level term is required to get correct classification. This feature confirms that the high level classification has a special importance in complex situations of classification. Finally, we show how the proposed technique can be employed in a real-world application, where it is capable of identifying variations and distortions of handwritten digit images. As a result, it supplies an improvement in the overall pattern recognition rate.

On-line breath analysis of volatile organic compounds as a method for colorectal cancer detection

Background: Analysis of exhaled volatile organic compounds (VOCs) in breath is an emerging approach for cancer diagnosis, but little is known about its potential use as a biomarker for colorectal cancer (CRC). We investigated whether a combination of VOCs could distinct CRC patients from healthy volunteers. Methods: In a pilot study, we prospectively analyzed breath exhalations of 38 CRC patient and 43 healthy controls all scheduled for colonoscopy, older than 50 in the average-risk category. The samples were ionized and analyzed using a Secondary ElectroSpray Ionization (SESI) coupled with a Time-of-Flight Mass Spectrometer (SESI-MS). After a minimum of 2 hours fasting, volunteers deeply exhaled into the system. Each test requires three soft exhalations and takes less than ten minutes. No breath condensate or collection are required and VOCs masses are detected in real time, also allowing for a spirometric profile to be analyzed along with the VOCs. A new sampling system precludes ambient air from entering the system, so background contamination is reduced by an overall factor of ten. Potential confounding variables from the patient or the environment that could interfere with results were analyzed. Results: 255 VOCs, with masses ranging from 30 to 431 Dalton have been identified in the exhaled breath. Using a classification technique based on the ROC curve for each VOC, a set of 9 biomarkers discriminating the presence of CRC from healthy volunteers was obtained, showing an average recognition rate of 81.94%, a sensitivity of 87.04% and specificity of 76.85%. Conclusions: A combination of cualitative and cuantitative analysis of VOCs in the exhaled breath could be a powerful diagnostic tool for average-risk CRC population. These results should be taken with precaution, as many endogenous or exogenous contaminants could interfere as confounding variables. On-line analysis with SESI-MS is less time-consuming and doesn’t need sample preparation. We are recruiting in a new pilot study including breath cleaning procedures and spirometric analysis incorporated into the postprocessing algorithms, to better control for confounding variables.

Reconocimiento de gestos basado en acelerómetros

En los últimos años, ha crecido de forma significativa el interés por la utilización de dispositivos capaces de reconocer gestos humanos. En este trabajo, se pretenden reconocer gestos manuales colocando sensores en la mano de una persona. El reconocimiento de gestos manuales puede ser implementado para diversos usos y bajo diversas plataformas: juegos (Wii), control de brazos robóticos, etc. Como primer paso, se realizará un estudio de las actuales técnicas de reconocimiento de gestos que utilizan acelerómetros como sensor de medida. En un segundo paso, se estudiará como los acelerómetros pueden utilizarse para intentar reconocer los gestos que puedan realizar una persona (mover el brazo hacia un lado, girar la mano, dibujar un cuadrado, etc.) y los problemas que de su utilización puedan derivarse. Se ha utilizado una IMU (Inertial Measurement Unit) como sensor de medida. Está compuesta por tres acelerómetros y tres giróscopos (MTi-300 de Xsens). Con las medidas que proporcionan estos sensores se realiza el cálculo de la posición y orientación de la mano, representando esta última en función de los ángulos de Euler. Un aspecto importante a destacar será el efecto de la gravedad en las medidas de las aceleraciones. A través de diversos cálculos y mediante la ayuda de los giróscopos se podrá corregir dicho efecto. Por último, se desarrollará un sistema que identifique la posición y orientación de la mano como gestos reconocidos utilizando lógica difusa. Tanto para la adquisición de las muestras, como para los cálculos de posicionamiento, se ha desarrollado un código con el programa Matlab. También, con este mismo software, se ha implementado un sistema de lógica difusa con la que se realizará el reconocimiento de los gestos, utilizando la herramienta FIS Editor. Las pruebas realizadas han consistido en la ejecución de nueve gestos por diferentes personas teniendo una tasa de reconocimiento comprendida entre el 90 % y 100 % dependiendo del gesto a identificar. ABSTRACT In recent years, it has grown significantly interest in the use of devices capable of recognizing human gestures. In this work, we aim to recognize hand gestures placing sensors on the hand of a person. The recognition of hand gestures can be implemented for different applications on different platforms: games (Wii), control of robotic arms ... As a first step, a study of current gesture recognition techniques that use accelerometers and sensor measurement is performed. In a second step, we study how accelerometers can be used to try to recognize the gestures that can make a person (moving the arm to the side, rotate the hand, draw a square, etc...) And the problems of its use can be derived. We used an IMU (Inertial Measurement Unit) as a measuring sensor. It comprises three accelerometers and three gyroscopes (Xsens MTI-300). The measures provided by these sensors to calculate the position and orientation of the hand are made, with the latter depending on the Euler angles. An important aspect to note is the effect of gravity on the measurements of the accelerations. Through various calculations and with the help of the gyroscopes can correct this effect. Finally, a system that identifies the position and orientation of the hand as recognized gestures developed using fuzzy logic. Both the acquisition of samples to calculate position, a code was developed with Matlab program. Also, with the same software, has implemented a fuzzy logic system to be held with the recognition of gestures using the FIS Editor. Tests have involved the execution of nine gestures by different people having a recognition rate between 90% and 100% depending on the gesture to identify.

Visual driver support system for traffic signs

It has been well documented that traffic accidents that can be avoided occur when the motorists miss or ignore traffic signs. With the attention of drivers getting diverted due to distractions like cell phone conversations, missing traffic signs has become more prevalent. Also, poor weather and other unfriendly driving conditions sometimes makes the motorists not to be alert all the time and see every traffic sign on the road. Besides, most cars do not have any form of traffic assistance. Because of heavy traffic and proliferation of traffic signs on the roads, there is a need for a system that assists the driver not to miss a traffic sign to reduce the probability of an accident. Since visual information is critical for driving, processed video signals from cameras have been chosen to assist drivers. These inexpensive cameras can be easily mounted on the automobile. The objective of the present investigation and the traffic system development is to recognize the traffic signs electronically and alert drivers. For the case study and the system development, five important and critical traffic signs have been selected. They are: STOP, NO ENTER, NO RIGHT TURN, NO LEFT TURN, and YIELD. The system was evaluated processing still pictures taken from the public roads, and the recognition results were presented in an analysis table to indicate the correct identifications and the false ones. The system reached the acceptable recognition rate of 80% for all five traffic signs. The processing rate was about three seconds. The capabilities of MATLAB, VLSI design platforms and coding have been used to generate a visual warning to complement the visual driver support system with a Field Programmable Gate Array (FPGA) on a XUP Virtex-II Pro Development System.

Design of an automated book reader as an assistive technology tool for blind persons

This dissertation introduces a novel automated book reader as an assistive technology tool for persons with blindness. The literature shows extensive work in the area of optical character recognition, but the current methodologies available for the automated reading of books or bound volumes remain inadequate and are severely constrained during document scanning or image acquisition processes. The goal of the book reader design is to automate and simplify the task of reading a book while providing a user-friendly environment with a realistic but affordable system design. This design responds to the main concerns of (a) providing a method of image acquisition that maintains the integrity of the source (b) overcoming optical character recognition errors created by inherent imaging issues such as curvature effects and barrel distortion, and (c) determining a suitable method for accurate recognition of characters that yields an interface with the ability to read from any open book with a high reading accuracy nearing 98%. This research endeavor focuses in its initial aim on the development of an assistive technology tool to help persons with blindness in the reading of books and other bound volumes. But its secondary and broader aim is to also find in this design the perfect platform for the digitization process of bound documentation in line with the mission of the Open Content Alliance (OCA), a nonprofit Alliance at making reading materials available in digital form. The theoretical perspective of this research relates to the mathematical developments that are made in order to resolve both the inherent distortions due to the properties of the camera lens and the anticipated distortions of the changing page curvature as one leafs through the book. This is evidenced by the significant increase of the recognition rate of characters and a high accuracy read-out through text to speech processing. This reasonably priced interface with its high performance results and its compatibility to any computer or laptop through universal serial bus connectors extends greatly the prospects for universal accessibility to documentation.

Coding Strategies and Implementations of Compressive Sensing

This dissertation studies the coding strategies of computational imaging to overcome the limitation of conventional sensing techniques. The information capacity of conventional sensing is limited by the physical properties of optics, such as aperture size, detector pixels, quantum efficiency, and sampling rate. These parameters determine the spatial, depth, spectral, temporal, and polarization sensitivity of each imager. To increase sensitivity in any dimension can significantly compromise the others.

This research implements various coding strategies subject to optical multidimensional imaging and acoustic sensing in order to extend their sensing abilities. The proposed coding strategies combine hardware modification and signal processing to exploiting bandwidth and sensitivity from conventional sensors. We discuss the hardware architecture, compression strategies, sensing process modeling, and reconstruction algorithm of each sensing system.

Optical multidimensional imaging measures three or more dimensional information of the optical signal. Traditional multidimensional imagers acquire extra dimensional information at the cost of degrading temporal or spatial resolution. Compressive multidimensional imaging multiplexes the transverse spatial, spectral, temporal, and polarization information on a two-dimensional (2D) detector. The corresponding spectral, temporal and polarization coding strategies adapt optics, electronic devices, and designed modulation techniques for multiplex measurement. This computational imaging technique provides multispectral, temporal super-resolution, and polarization imaging abilities with minimal loss in spatial resolution and noise level while maintaining or gaining higher temporal resolution. The experimental results prove that the appropriate coding strategies may improve hundreds times more sensing capacity.

Human auditory system has the astonishing ability in localizing, tracking, and filtering the selected sound sources or information from a noisy environment. Using engineering efforts to accomplish the same task usually requires multiple detectors, advanced computational algorithms, or artificial intelligence systems. Compressive acoustic sensing incorporates acoustic metamaterials in compressive sensing theory to emulate the abilities of sound localization and selective attention. This research investigates and optimizes the sensing capacity and the spatial sensitivity of the acoustic sensor. The well-modeled acoustic sensor allows localizing multiple speakers in both stationary and dynamic auditory scene; and distinguishing mixed conversations from independent sources with high audio recognition rate.

A summative scoring system for evaluation of human kinematic performance

Evaluation of human kinematic performance is essential in rehabilitation and skill assessment. These services are in high demand where the improvements made due to exercises need to be regularly assessed. In some relevant industries there is a need to evaluate their employee capabilities quantitatively for accident compensation and insurance purposes. In particular, these assessments are preferred to be based on more quantifiable measures in a standardized form ensuring accuracy, reliability, ease of use and anywhere anytime information to the clinician. Therefore, it is necessary to have an efficient mechanism for evaluation and assessment of human kinematic movements as the current motion matching and recognition algorithms fall short due to characteristically strict specifications required in numerous health care applications. In this paper, we propose a summative approach using a double integral to define a closeness between two trajectories typically generated by human movement. This approach can be considered as a spatial scoring mechanism in the evaluation of human kinematic performance as well as in movement recognition applications. Several experiments based on computer simulations as well as real data were set up to examine the performance of the proposed approach as a scoring mechanism for the evaluation of human kinematic performances. The results demonstrated better characterization of the movement assessment and motion recognition ability, with a recognition rate of 86.19%, than the currently used methods such as Gaussian mixture models and pose normalization employed in motion recognition tasks. Finally, we use the scoring mechanism to analyze the proximity in human kinematic performance.

Authentification biométrique par dynamique de frappe pour évaluation à distance utilisant SVM à une classe

La machine à vecteurs de support à une classe est un algorithme non-supervisé qui est capable d’apprendre une fonction de décision à partir de données d’une seule classe pour la détection d’anomalie. Avec les données d’entraînement d’une seule classe, elle peut identifier si une nouvelle donnée est similaire à l’ensemble d’entraînement. Dans ce mémoire, nous nous intéressons à la reconnaissance de forme de dynamique de frappe par la machine à vecteurs de support à une classe, pour l’authentification d’étudiants dans un système d’évaluation sommative à distance à l’Université Laval. Comme chaque étudiant à l’Université Laval possède un identifiant court, unique qu’il utilise pour tout accès sécurisé aux ressources informatiques, nous avons choisi cette chaîne de caractères comme support à la saisie de dynamique de frappe d’utilisateur pour construire notre propre base de données. Après avoir entraîné un modèle pour chaque étudiant avec ses données de dynamique de frappe, on veut pouvoir l’identifier et éventuellement détecter des imposteurs. Trois méthodes pour la classification ont été testées et discutées. Ainsi, nous avons pu constater les faiblesses de chaque méthode dans ce système. L’évaluation des taux de reconnaissance a permis de mettre en évidence leur dépendance au nombre de signatures ainsi qu’au nombre de caractères utilisés pour construire les signatures. Enfin, nous avons montré qu’il existe des corrélations entre le taux de reconnaissance et la dispersion dans les distributions des caractéristiques des signatures de dynamique de frappe.

Odour emissions from anaerobic piggery ponds. 2: Improving estimates of emission rate through recognition of spatial variability

Odour emission rates were measured for seven different anaerobic ponds treating piggery wastes at six to nine discrete locations across the surface of each pond on each sampling occasion over a thirteen month period. Significant variability in emission rates were observed for each pond. Measurement of a number of water quality variables in pond liquor samples collected at the same time and from the same locations as the odour samples indicated that the composition of the pond liquor was also variable. The results indicated that spatial variability was a real phenomenon and could have a significant impact on odour assessment practices. Considerably more odour samples would be required to characterise pond emissions than currently recommended by most practitioners, or regulatory agencies.

The declining birth-rate; its causes and effects. (Being the report of and the chief evidence taken by the National birth-rate commission, instituted, with official recognition, by the National council of public morals - for the promotion of race regeneration - spiritual, moral and physical).

Microfilmed for preservation