Outer Bounds on the Sum Rate of the K-User MIMO Gaussian Interference Channel

This paper derives outer bounds on the sum rate of the K-user MIMO Gaussian interference channel (GIC). Three outer bounds are derived, under different assumptions of cooperation and providing side information to receivers. The novelty in the derivation lies in the careful selection of side information, which results in the cancellation of the negative differential entropy terms containing signal components, leading to a tractable outer bound. The overall outer bound is obtained by taking the minimum of the three outer bounds. The derived bounds are simplified for the MIMO Gaussian symmetric IC to obtain outer bounds on the generalized degrees of freedom (GDOF). The relative performance of the bounds yields insight into the performance limits of multiuser MIMO GICs and the relative merits of different schemes for interference management. These insights are confirmed by establishing the optimality of the bounds in specific cases using an inner bound on the GDOF derived by the authors in a previous work. It is also shown that many of the existing results on the GDOF of the GIC can be obtained as special cases of the bounds, e. g., by setting K = 2 or the number of antennas at each user to 1.

Ellipse Fitting Using the Finite Rate of Innovation Sampling Principle

Standard approaches for ellipse fitting are based on the minimization of algebraic or geometric distance between the given data and a template ellipse. When the data are noisy and come from a partial ellipse, the state-of-the-art methods tend to produce biased ellipses. We rely on the sampling structure of the underlying signal and show that the x- and y-coordinate functions of an ellipse are finite-rate-of-innovation (FRI) signals, and that their parameters are estimable from partial data. We consider both uniform and nonuniform sampling scenarios in the presence of noise and show that the data can be modeled as a sum of random amplitude-modulated complex exponentials. A low-pass filter is used to suppress noise and approximate the data as a sum of weighted complex exponentials. The annihilating filter used in FRI approaches is applied to estimate the sampling interval in the closed form. We perform experiments on simulated and real data, and assess both objective and subjective performances in comparison with the state-of-the-art ellipse fitting methods. The proposed method produces ellipses with lesser bias. Furthermore, the mean-squared error is lesser by about 2 to 10 dB. We show the applications of ellipse fitting in iris images starting from partial edge contours, and to free-hand ellipses drawn on a touch-screen tablet.

A new model for the energy release rate of fibre/matrix interfacial fracture

On the basis of the well-known shear-lag analysis of fibre/matrix interface stresses and the assumption of identical axial strains in the fibre and matrix, a new model for predicting the energy release rate of interfacial fracture of the fibre pull-out test model is attempted. The expressions for stresses in the fibre, matrix and interface are derived. The formula for interfacial debonding energy release rate is given. Numerical calculations are conducted and the results obtained are compared with those of the existing models.

Effect of Cold Rolling Ratio and Heating Rate of Batch Annealing on Textures of Micro-Carbon Steel Sheet

在四辊冷轧试验机和Gleeble-1500试验机上进行了热轧微碳钢板的冷轧和退火试验。用D/max-RC衍射仪测量了试样的,/”层织构,并用Roe软件进行了ODF分析。研究表明,所研究的热轧微碳深冲板压下率约为75%,退火升温速度为20-40℃/h时,试样为{111}织构特征；压下率较大(80%)时,退火织构为较弱的{111}组分。无论{111}织构还是非{111}织构都是在形核阶段开始形成,在晶粒长大优先长大,受到定向形核和选择生长双重机制的作用。

Growth rate of YBCO single grains containing Y-2411(M)

Y-Ba-Cu-O (YBCO) single grains have the potential to generate large trapped magnetic fields for a variety of engineering applications, and research on the processing and properties of this material has attracted world-wide interest. In particular, the introduction of flux pinning centres to the large grain microstructure to improve its current density, Jc, and hence trapped field, has been investigated extensively over the past decade. Y 2Ba4CuMOx [Y-2411(M)], where M = Nb, Ta, Mo, W, Ru, Zr, Bi and Ag, has been reported to form particularly effective flux pinning centres in YBCO due primarily to its ability to exist as nano-size inclusions in the superconducting phase matrix. However, the addition of the Y-2411(M) phase to the precursor composition complicates the melt-processing of single grains. We report an investigation of the growth rate of single YBCO grains containing Y-2411(Bi) phase inclusions and Y2O3. The superconducting properties of these large single grains have been measured specifically to investigate the effect of Y2O3 on broadening the growth window of these materials. © 2010 IOP Publishing Ltd.

The influence of corrosion on the erosion of aluminium by aqueous silica slurries

The slurry erosion-corrosion behaviour of aluminium in aqueous silica slurries containing 0.5 M NaCl, acetic acid and 0.1 M Na2CO3 at open circuit has been investigated using a modified slurry erosion rig. The erosion rates of aluminium in the NaCl and acetic acid slurries were much higher than those in an aqueous slurry without electrolyte additives even though the pure corrosion component was very small. Eroded specimens were examined by scanning electron and optical microscopy. In pure aqueous slurry erosion, the basic mechanism leading to mass loss was the ductile fracture of flakes formed on the eroded surface. In corrosive slurries, however, the mass loss was enhanced by cracking of the flakes induced by stress and corrosion. © 1995.

Debonding and cracking energy release rate of the fiber/matrix interface

An investigation of fiber/matrix interfacial fracture energy is presented in this paper. Several existing theoretical expressions for the fracture energy of interfacial debonding are reviewed. For the single-fiber/matrix debonding and pull-out experimental model, a study is carried out on the effect of interfacial residual compressive stress and friction on interface cracking energy release rate.

Statistical formulation and experimental determination of growth rate of micrometre cracks under impact loading

A new statistical formulation and a relevant experimental approach to determine the growth rate of microcracks were proposed. The method consists of experimental measurements and a statistical analysis' on the basis of the conservation law of number density of microcracks in phase space. As a practical example of the method, the growth rate of microcracks appearing in an aluminium alloy subjected to planar impact loading was determined to be ca. 10 mu m/mu s under a tensile stress of 1470 MPa and load duration between 0.26 mu s and 0.80 mu s.

Influence of Water Depth on the Rate of Expansion of Giant Cutgrass Populations and Management Implications

Giant cutgrass ( Zizaniopsis miliacea (Michx.) Doell. & Asch.), a tall emergent grass native to the southeastern United States, was studied in Lake Seminole where it formed large expanding stands, and Lake Alice where it was confined to a stable narrow fringe.

A method for estimating the rate of shedding of tags from yellowfin tuna

ENGLISH: The present paper describes a new method for estimating the shedding rate of tags. The method utilizes not only data on tagging and recovery of fish marked with two tags but also data from those marked with one. One important advantage of the new technique is that the estimates of the shedding rates are free from distortion caused by variations in fishing intensity during the total recovery period. The idea of this method appears to be implicit in a short note by Gulland (1963). This technique has been applied to the data obtained by the Inter-American Tropical Tuna Commission in a tagging cruise off the west coast of southern Baja California, during June 1963, at which time both single and double-tagged yellowfin tuna were released. Details of the tagging procedure and equipment have been described by Fink (1965b). The results presented in the present paper are for yellowfin tuna tagged with dart tags. Estimates of shedding should be made separately for each species investigated and also for each type of tag used, since these rates may be variable and often unexpectedly high (Springer and McErlean 1961, Chadwick 1963). SPANISH: El presente estudio describe un nuevo método para estimar las tasas del desprendimiento de marcas. El método emplea no solamente los datos sobre la marcación y recobro de peces marcados con dos marcas, pero también datos de los peces marcados con una marca. Una ventaja importante de la nueva técnica, es que las estimaciones de las tasas de desprendimiento son libres de alteración, causada por las variaciones en la intensidad de pesca durante el período total de recobro. La idea de este método parece ser implícita en un breve apunte por Gulland (1963). Esta técnica se ha aplicado a los datos obtenidos por la Comisión Interamericana del Atún Tropical, en un crucero de marcación efectuado frente a la costa occidental al sur de Baja California, en junio de 1963, tiempo en el cual fueron liberados atunes aleta amarilla marcados tanto con una como con dos marcas. Los detalles del procedimiento de la marcación y del equipo usado han sido descritos por Fink (1965b). Los resultados presentados en este estudio, pertenecen al atún aleta amarilla marcado con marcas de dardo. Las estimaciones del desprendimiento deben efectuarse separadamente para cada especie que ha sido investigada y también para cada tipo de marca usado, ya que estas tasas pueden ser vaiables, y a menudo inesperadamente altas (Springer y McErlean 1961, Chadwick 1963). (PDF contains 20 pages.)

The growth and survival rate of Oreochromis niloticus fries fed (private) with varying percentages of Leucaena leucocephala leaf meal based diets

A-ten-week feeding trial was carried out to evaluate the growth and survival rate of Oreochromis niloticus fed with varying percentage levels of Leucaena leucocephala leaf meal based diets. The substitution rates of L.leucocephala leaf meal for groundnut cake in the various diets were 0% - Diet 1, 25% - Diet 2, 50% - Diet 3 and 75% - Diet 4. Ten fries with an average weight of 0.44g were stocked at the rate of 10 fish per bowl and fed at 5% body weight. Diet 1 with 0% inclusion of Leucaena leaf meal gave a significant difference (P>0.05) in growth and survival rate compared with diets 2, 3 and 4. The water quality parameters recorded were appropriate for fish culture

The growth and survival rate of (private) Oreochromis niloticus fingerlings fed with varying percentages of Leucaena leucocephala leaf meal based diets

A-ten-week feeding trial was carried out to evaluate the growth and survival rate of Oreochromis niloticus fed with varying percentage levels of Leucaena leucocephala leaf meal as a substitute for groundnut cake. The levels in the various diets were 0% - Diet 1, 25% - Diet 2, 50% - Diet 3 and 75% - Diet 4. Ten fingerlings with an average weight of 0.44g were stocked at the rate of 10 fish per bowl and fed at 5% body weight. Diet 1 with 0% inclusion of leucaena leaf meal gave a significant difference (P>0.05) in growth and survival rate compared with diets 2, 3 and 4. The water quality parameters recorded were appropriate for fish culture