Desenvolvimento de tintas fotocrómicas para aplicação em embalagens inteligentes

Dissertação para obtenção do Grau de Mestre em Tecnologia Alimentar

Ultraviolet induction of antifungal activity in plants.

Ultraviolet-C irradiation as a method to induce the production of plant compounds with antifungal properties was investigated in the leaves of 18 plant species. A susceptibility assay to determine the antifungal susceptibility of filamentous fungi was developed based on an agar dilution series in microtiter plates. UV irradiation strongly induced antifungal properties in five species against a clinical Fusarium solani strain that was responsible for an onychomycosis case that was resistant to classic pharmacological treatment. The antifungal properties of three additional plant species were either unaffected or reduced by UV-C irradiation. This study demonstrates that UV-C irradiation is an effective means of modulating the antifungal activity of very diverse plants from a screening perspective.

Sistemas e condições de colheita e armazenamento na qualidade de morangos cv. Camarosa

O objetivo deste trabalho foi avaliar a qualidade de morangos 'Camarosa' submetidos a diferentes sistemas de colheita, luz UV-C, atmosfera modificada e armazenamento por diferentes períodos, visando ao aumento da vida útil e à redução de perdas após a colheita. A colheita foi realizada em dois sistemas: no sistema um, o produtor realizou a colheita sem luvas, em caixas de madeira e sem utilizar o pré-resfriamento das frutas; no sistema dois, a colheita foi realizada por pessoal treinado, com utilização de luvas desinfetadas, em caixas plásticas lavadas e desinfetadas, foi empregado o pré-resfriamento a -3ºC durante 1 hora, até a temperatura da polpa das frutas atingir 4ºC. Os tratamentos foram: T1- controle (frutas sem luz UV-C e sem filme de polietileno); T2- frutas submetidas à luz UV-C durante 6 minutos; T3- frutas acondicionadas em filme de polietileno; T4- frutas submetidas à luz UV-C e acondicionadas em filme de polietileno. O armazenamento foi realizado à temperatura de 0±0,5ºC e UR de 90-95% por períodos de 3; 6 e 9 dias, seguidos de simulação da comercialização por 3 dias, à temperatura de 8±0,5ºC e UR de 75-80%. Na colheita e após o armazenamento, avaliaram-se: perda de massa; cor; firmeza de polpa; sólidos solúveis (SS); acidez total titulável (ATT); relação SS/ATT; ácido ascórbico, e incidência de podridões. A utilização de pré-resfriamento reduziu a perda de massa e a porcentagem de podridões. A perda de massa diminuiu nas frutas tratadas com filme. A luz UV-C reduziu a porcentagem de podridões. Morangos 'Camarosa' colhidos cuidadosamente, submetidos a pré-resfriamento, com utilização de luz UV-C e filme de polietileno, mantêm a qualidade durante nove dias de armazenamento a 0ºC e 3 dias de comercialização a 8ºC.

Conservação pós-colheita de pêssego com o uso da refrigeração e da irradiação

Avaliaram-se os efeitos da irradiação ultravioleta (254nm, UV-C) na conservação de pêssegos cultivar Douradão, aos 5; 10; 15 e 20 dias de armazenamento com o uso da refrigeração (0ºc e 75-85% de uR). os tratamentos foram: controle (0 minuto de exposição - 0 kj. m -2); T1 (5 minutos -1,85 kj. m -2); T2 (10 minutos - 3,71 kj. m -2); (15 minutos - 5,55 kj. m -2), e T4 (20 minutos - 7,52 kj. m -2). o delineamento experimental foi um esquema inteiramente casualizado, com 5 tempos de armazenamento: (0; 5; 10; 15 e 20 dias), com 3 repetições e 2 frutos por unidade experimental. os parâmetros avaliados foram: sólidos solúveis (SS); acidez titulável (AT); relação SS/AT "Ratio"; pH; firmeza da polpa, respiração e vida útil. Os pêssegos não apresentaram alteração do pH e da At durante o tempo de armazenamento.os melhores valores de SS e firmeza da polpa foram obtidos com o tratamento T4. A taxa respiratória foi menor em T4. As alterações de SS, firmeza da polpa e respiração apresentadas pelos frutos do tratamento T4 foram menores que aquelas dos demais tratamentos, demonstrando a eficácia do uso da irradiação ultravioleta.

Tendências mais recentes na fotoproteção

A exposição à radiação ultravioleta (UV) está associada a uma variedade de efeitos negativos causados no organismo humano. Este espectro de radiação UV divide-se em UVA (320-400nm), responsável pelo aparecimento dos sinais do envelhecimento cutâneo e danos indiretos no DNA, em UVB (290-320nm), responsável pelo eritema solar e danos diretos no DNA, e em UVC (100-290nm), cuja radiação fica retida na camada de ozono. A pele apresenta um mecanismo de defesa natural contra a radiação UV, mas este confere uma proteção limitada, tornando-se indispensável o recurso à fotoproteção. A utilização de vestuário adequado, chapéu e óculos de sol durante a exposição solar têm sido reconhecidas como medidas importantes de fotoproteção, em complementaridade com um protetor solar. Os filtros dos protetores solares são selecionados e aprovados por agências reguladoras da região em que o produto é comercializado. Na União Europeia existem atualmente 28 filtros para radiação UV aprovados. Esta dissertação aborda as últimas tendências na área da fotoproteção. Os últimos desenvolvimentos na área dos protetores solares sugerem filtros solares que compreendam ação sobre a radiação UVA e UVB e IV, em associação com outros compostos que demonstram propriedades reparadoras a nível tópico, como é o caso dos antioxidantes. Assim, os avanços nesta área incluem os suplementos alimentares, os agentes estimulantes da melanogénese e os novos filtros solares.

Resistance to ultraviolet-induced apoptosis in DNA repair deficient growth arrested human fibroblasts is not related to recovery from RNA transcription blockage

The impact of ultraviolet (UV-C) photoproducts on apoptosis induction was investigated in growth arrested (confluent) and proliferating human primary fibroblasts. Confluent fibroblasts were more resistant to UV-C-induced apoptosis than proliferating cells, and this was observed for normal human cells and for cells from patients with Cockayne and trichothiodystrophy syndromes, deficient in transcription coupled repair. This resistance was sustained for at least seven days and was not due to DNA repair efficiency, as the removal of CPDs in the genome was similar under both growth conditions. There was no correlation between reduced apoptosis and RNA synthesis recovery. Following UV-C treatment, proliferating and confluent fibroblasts showed a similar level of RNA synthesis inhibition and recovery from transcription blockage. These results support the hypothesis that the decrease of DNA replication, in growth arrested cells, protects cell from UV-C-induced apoptosis, even in the presence of DNA lesions. (C) 2007 Elsevier B.V. All rights reserved.

Coating of Cotton Yarn with Poly(vinyl alcohol) and Poly(N-vinyl-2-pyrrolidone) Crosslinked via Ultraviolet Radiation

The coating of cotton fiber is used in the textile industry to increase the mechanical resistance of the yarn and their resistance to vibration, friction, impact, and elongation, which are some of the forces to which the yarn is subjected during the weaving process. The main objective of this study was to investigate the use of synthetic hydrophilic polymers, poly(vinyl alcohol) (PVA), and poly(N-vinyl-2-pyrrolidone) (PVP) to coat 100% cotton textile fiber, with the aim of giving the fiber temporary mechanical resistance. For the fixation of the polymer on the fiber, UV-C radiation was used as the crosslinking process. The influence of the crosslinking process was determined through tensile testing of the coated fibers. The results indicated that UV-C radiation increased the mechanical resistance of the yarn coated with PVP by up to 44% and the yarn coated with PVA by up to 67% compared with the pure cotton yarn, that is, without polymeric coating and crosslinking. This study is of great relevance, and it is important to consider that UV-C radiation dispenses with the use of chemical substances and prevents the generation of toxic waste at the end of the process. (C) 2010 Wiley Periodicals, Inc. J Appl Polym Sci 119: 2560-2567, 2011

Crosslinking of Poly(N-vinyl-2-pyrrolidone) in the Coating of Cotton Yarn

Coating of cotton yarn is employed in the textile industry to increase the mechanical resistance of the yarns and resistance to vibration, friction, impact, and elongation, which are some of the forces to which the yarn is subjected during the weaving process. The main objective of this study is to investigate the usage of a synthetic hydrophilic polymer, poly(N-vinyl-2-pyrrolidone) (PVP), to coat 100% cotton textile yarn, aiming to give the yarn a temporary mechanical resistance. For the improvement of the mechanical resistance of the yarn, the following crosslinking processes of PVP were investigated: UV-C (ultraviolet) radiation, the Fenton and photo-Fenton reactions, and sensitized UV-C radiation. The influence of each crosslinking process was determined through tensile testing of the coated yarns. The results indicated that the best crosslinking process employed was UV-C radiation; increasing the mechanical resistance of the yarn up to 44% if compared with the pure cotton yarn, that is, without polymeric coating and crosslinking. POLYM. ENG. SCI., 51:445-453, 2011. (C) 2010 Society of Plastics Engineers

Um modelo analítico e computacional para consideração de efeitos de envelhecimento em estruturas de material compósito

Os materiais compósitos reforçados por fibras apresentam vantagens quando comparados aos materiais de construção mais tradicionais como concreto e aço. Por outro lado, devido ao fato destes materiais serem relativamente recentes no mercado, questões a respeito de sua durabilidade são ainda objeto de discussão e faz-se necessária intensa pesquisa sobre o envelhecimento dos compósitos. Como conseqüência, recentemente têm surgido inúmeros trabalhos à respeito da degradação dos compósitos considerando efeitos como temperatura, oxidação, radiação UV, condições de carregamento, etc. A maioria destas pesquisas, no entanto, são realizadas a nível de material e não são diretamente aplicáveis à situações de projeto. Desta forma, existe grande demanda por novos estudos e dados compatíveis com aplicações estruturais. Neste trabalho apresenta-se um modelo analítico-numérico adequado para, interpretação e aplicação destes dados experimentais em análise e projeto de estrutural. A formulação proposta inclui relações constitutivas elásticas anisotrópicas com envelhecimento, relações constitutivas viscoelásticas anisotrópicas com envelhecimento em termos de variáveis de estado, análise de falhas com critério de degradação ajustado à idade do material e considera-se grandes deslocamentos e pequenas deformações. As diferenças essenciais entre os processos de envelhecimento em endurecimento e amolecimento são descritos juntamente com as relações constitutivas para cada caso. Estas equações são deduzidas na forma adequada para análise numérica via método dos elementos finitos usando uma solução incremental-iterativa com consideração de efeitos pos-críticos. Vários exemplos são apresentados, incluindo análises elásticas, viscoelásticas e de falha com envelhecimento.

Desenvolvimento de microemulsões contendo fotoprotetores inorgânicos nanoparticulador

The inorganic actives, represented mainly by microfine zinc oxide and titanium dioxide, have shown great potential to protect against large UV spectrum. The aim of this study is the development, characterization and analysis of stability in the short term of microemulsions containing inorganic fotoprotection agents. The microemulsions identified by the phases diagram containing the metallic oxides were produced by two different methods and subjected to the centrifugation test and thermal stress cycles, and subsequently characterized by macroscopic evaluation, test dilution, electrical conductivity, pH, particle size, and zeta potential. This study highlights the influence of the metal oxides addition in the structure and distribution of micelles in the microemulsions

Conservação pós-colheita de pêssego com o uso da refrigeração e da irradiação

Avaliaram-se os efeitos da irradiação ultravioleta (254nm, UV-C) na conservação de pêssegos cultivar Douradão, aos 5; 10; 15 e 20 dias de armazenamento com o uso da refrigeração (0ºc e 75-85% de uR). os tratamentos foram: controle (0 minuto de exposição - 0 kj. m -2); T1 (5 minutos -1,85 kj. m -2); T2 (10 minutos - 3,71 kj. m -2); (15 minutos - 5,55 kj. m -2), e T4 (20 minutos - 7,52 kj. m -2). o delineamento experimental foi um esquema inteiramente casualizado, com 5 tempos de armazenamento: (0; 5; 10; 15 e 20 dias), com 3 repetições e 2 frutos por unidade experimental. os parâmetros avaliados foram: sólidos solúveis (SS); acidez titulável (AT); relação SS/AT Ratio; pH; firmeza da polpa, respiração e vida útil. Os pêssegos não apresentaram alteração do pH e da At durante o tempo de armazenamento.os melhores valores de SS e firmeza da polpa foram obtidos com o tratamento T4. A taxa respiratória foi menor em T4. As alterações de SS, firmeza da polpa e respiração apresentadas pelos frutos do tratamento T4 foram menores que aquelas dos demais tratamentos, demonstrando a eficácia do uso da irradiação ultravioleta.

Envelhecimento ambiental acelerado em PRF a base de tecidos híbridos kevlar/vidro: propriedades e instabilidade estrutural

There are a number of damaging mechanisms that various materials can suffer in service. However, when working with polymer composite materials, this is something that requires analysis, especially when exposed to adverse environmental conditions. Thus, the objective of the present thesis is the study of the direct influence of environmental aging and the form of hybridization of the reinforcement woven on the structural stability, surfacedegradation and fracture process of polymer composites laminates. For this, the development of two polymer composite laminates was necessary, where one of them was reinforced with a bi-directional woven with hybrid strandsofkevlar-49/glass-Efibers, and the other also with a bi-directionalwoven, however with weft and warpformed of alternating strandsof Kevlar-49 fibers and glass-E fiber The reinforcementwoven are industrially manufactured. Both laminates use a polyester resin as a matrixand are made up of four layers each. All laminates were industrially prepared by the hand lay-up method of manufacturing. To do this, test specimens were manufactured of the respective laminates and submitted to environmental aging accelerated through the aging chamber. They were exposed to alternating cycles of UV radiation and moisture (heated steam) for a standard defined period. At the end of the exposure period the specimens were subjected to mechanical tests of uniaxial tensile and bending in three points and to the characterizationsof the fracture and surface deterioration. In addition, they were submitted to a structural degradation assessment by the measurement of mass variation technique (MMVT) and the measurement of thickness variation technique (MTVT), this last technique being developed in this thesis. At the end of the analysis it was observed that the form of hybridization of the reinforcement woven and the aging process directly influence with losses or gain in mechanical properties, with losses in the structural degradation and in the formation and propagation of damage mechanism of the developedcomposite laminates

Laminados compósitos de PRFV: efeitos da descontinuidade geométrica e do envelhecimento ambiental acelerado

The growing demand in the use of composite materials necessitates a better understanding of its behavior related to many conditions of loading and service, as well as under several ways of connections involved in mechanisms of structural projects. Within these project conditions are highlighted the presence of geometrical discontinuities in the area of cross and longitudinal sections of structural elements and environmental conditions of work like UV radiation, moisture, heat, leading to a decrease in final mechanical response of the material. In this sense, this thesis aims to develop studies detailed (experimental and semi-empirical models) the effects caused by the presence of geometric discontinuity, more specifically, a central hole in the longitudinal section (with reduced cross section) and the influence of accelerated environmental aging on the mechanical properties and fracture mechanism of FGRP composite laminates under the action of uniaxial tensile loads. Studies on morphological behavior and structural degradation of composite laminates are performed by macroscopic and microscopic analysis of affected surfaces, in addition to evaluation by the Measurement technique for mass variation (TMVM). The accelerated environmental aging conditions are simulated by aging chamber. To study the simultaneous influence of aging/geometric discontinuity in the mechanical properties of composite laminates, a semiempirical model is proposed and called IE/FCPM Model. For the stress concentration due to the central hole, an analisys by failures criteria were performed by Average-Stress Criterion (ASC) and Point-Stress Criterion (PSC). Two polymeric composite laminates, manufactured industrially were studied: the first is only reinforced by short mats of fiberglass-E (LM) and the second where the reinforced by glass fiber/E comes in the form of bidirectional fabric (LT). In the conception configurations of laminates the anisotropy is crucial to the final mechanical response of the same. Finally, a comparative study of all parameters was performed for a better understanding of the results. How conclusive study, the characteristics of the final fracture of the laminate under all conditions that they were subjected, were analyzed. These analyzes were made at the macroscopic level (scanner) microscope (optical and scanning electron). At the end of the analyzes, it was observed that the degradation process occurs similarly for each composite researched, however, the LM composite compared to composite LT (configurations LT 0/90º and LT ±45º) proved to be more susceptible to loss of mechanical properties in both regarding with the central hole as well to accelerated environmental aging

Desenvolvimento de um reator fotoquímico aplicável no tratamento de efluentes fenólicos presentes na indústria do petróleo

With water pollution increment at the last years, so many progresses in researches about treatment of contaminated waters have been developed. In wastewaters containing highly toxic organic compounds, which the biological treatment cannot be applied, the Advanced Oxidation Processes (AOP) is an alternative for degradation of nonbiodegradable and toxic organic substances, because theses processes are generation of hydroxyl radical based on, a highly reactivate substance, with ability to degradate practically all classes of organic compounds. In general, the AOP request use of special ultraviolet (UV) lamps into the reactors. These lamps present a high electric power demand, consisting one of the largest problems for the application of these processes in industrial scale. This work involves the development of a new photochemistry reactor composed of 12 low cost black light fluorescent lamps (SYLVANIA, black light, 40 W) as UV radiation source. The studied process was the photo-Fenton system, a combination of ferrous ions, hydrogen peroxide, and UV radiation, it has been employed for the degradation of a synthetic wastewater containing phenol as pollutant model, one of the main pollutants in the petroleum industry. Preliminary experiments were carrier on to estimate operational conditions of the reactor, besides the effects of the intensity of radiation source and lamp distribution into the reactor. Samples were collected during the experiments and analyzed for determining to dissolved organic carbon (DOC) content, using a TOC analyzer Shimadzu 5000A. The High Performance Liquid Chromatography (HPLC) was also used for identification of the cathecol and hydroquinone formed during the degradation process of the phenol. The actinometry indicated 9,06⋅1018 foton⋅s-1 of photons flow, for 12 actived lamps. A factorial experimental design was elaborated which it was possible to evaluate the influence of the reactants concentration (Fe2+ and H2O2) and to determine the most favorable experimental conditions ([Fe2+] = 1,6 mM and [H2O2] = 150,5 mM). It was verified the increase of ferrous ions concentration is favorable to process until reaching a limit when the increase of ferrous ions presents a negative effect. The H2O2 exhibited a positive effect, however, in high concentrations, reaching a maximum ratio degradation. The mathematical modeling of the process was accomplished using the artificial neural network technique

Estudo da remoção de compostos orgânicos, benzeno e tolueno, em solução aquosa por processo oxidativo avançado do tipo Fenton

The oil and petrochemical industry is responsable to generate a large amount of waste and wastewater. Among some efluents, is possible find the benzene, toluene, ethilbenze and isomers of xilenes compounds, known as BTEX. These compounds are very volatily, toxic for environment and potencially cancerigenous in man. Oxidative advanced processes, OAP, are unconventional waste treatment, wich may be apply on treatment and remotion this compounds. Fenton is a type of OAPs, wich uses the Fenton s reactant, hydrogen peroxide and ferrous salt, to promove the organic degradation. While the Photo-Fenton type uses the Fenton s reactant plus UV radiation (ultraviolet). These two types of OAP, according to literature, may be apply on BTEX complex system. This project consists on the consideration of the utilization of technologies Fenton and Photo-Fenton in aqueous solution in concentration of 100 ppm of BTEX, each, on simulation of condition near of petrochemical effluents. Different reactors were used for each type of OAP. For the analyticals results of amount of remotion were used the SPME technique (solid phase microextraction) for extraction in gaseous phase of these analytes and the gas chromatography/mass espectrometry The arrangement mechanical of Photo-Fenton system has been shown big loss by volatilization of these compounds. The Fenton system has been shown capable of degradate benzene and toluene compounds, with massic percentage of remotion near the 99%.