Empowering, degrading or a 'mutually exploitative' exchange For women?: Characterising the power relations of the strip club

This paper seeks to characterise the gendered and sexualised power relations of both female and male strip clubs, and to signal what this means for establishing positive definitions of female desire. It is argued that while it is not useful to present female strippers, or female patrons of male strip clubs as purely passive victims of male heterosexism within these venues, it is equally damaging to assume that these venues represent a whole-scale challenge to conventional oppressive gender and sexual relations for women. Some research has even suggested that both strippers and their patrons are engaged in a 'mutually exploitative' power relationship. Moreover, further empirical research documents key points where female dancers have perhaps wielded 'more' power over patrons at certain moments, and female dancers have highlighted feelings of empowerment and highlighted potential for gender and sexual relations which position women as passive to be subverted within stripping. However, such feelings are often temporally specific and are not applicable to all women in the strip industry. It may be particularly hard for these to manifest in women concentrated in the least economically-rewarding areas of the industry who have less 'power' to resist compromising their bodily boundaries. Furthermore, it is argued that women watching male strippers does little to reverse the 'male gaze', and nor does this male occupation carry as much negative social stigma with it as female stripping suffers. It is thus argued that the overwhelming picture, stemming largely from accounts of former dancers and from empirical studies of individual clubs, suggests these venues in fact do very little to challenge normative hetero-oppressive sexual scripts.

An adaptive code position modulation scheme for wireless sensor networks

In this letter, an energy-efficient adaptive code position modulation scheme is proposed for wireless sensor networks to provide the relatively stable bit error ratio (BER) performance expected by the upper layers. The system is designed with focus on the adaptive control of transmission power, which is adjusted based on the measured power density of background noise. Interfaces among the modulation module, packet scheduling module and upper layer are provided for flexible adjustments to adapt to the background noise and deliver expected application quality. Simulations with Signal Processing Worksystem (SPW) validate the effectiveness of the scheme. © 2005 IEEE.

Experimental and theoretical study of longitudinal power distribution in a random DFB fiber laser

We have measured the longitudinal power distribution inside a random distributed feedback Raman fiber laser. The observed distribution has a sharp maximum whose position depends on pump power. The spatial distribution profiles are different for the first and the second Stokes waves. Both analytic solution and results of direct numerical modeling are in excellent agreement with experimental observations. © 2012 Optical Society of America.

Online sensorless position estimation for switched reluctance motors using one current sensor

This paper proposes an online sensorless rotor position estimation technique for switched reluctance motors (SRMs) using just one current sensor. It is achieved by first decoupling the excitation current from the bus current. Two phase-shifted pulse width modulation signals are injected into the relevant lower transistors in the asymmetrical half-bridge converter for short intervals during each current fundamental cycle. Analog-to-digital converters are triggered in the pause middles of the dual pulse to separate the bus current for excitation current recognition. Next, the rotor position is estimated from the excitation current, by a current-rise-time method in the current-chopping-control mode in a low-speed operation and a current-gradient method in the voltage-pulse-control mode in a high-speed operation. The proposed scheme requires only a bus current sensor and a minor change to the converter circuit, without a need for individual phase current sensors or additional detection devices, achieving a more compact and cost-effective drive. The performance of the sensorless SRM drive is fully investigated. The simulation and experiments on a 750-W three-phase 12/8-pole SRM are carried out to verify the effectiveness of the proposed scheme.

A villamos erőművek szén-dioxid-kibocsátásának modellezése reálopciók segítségével = Modelling of the carbon dioxide emissions of a power plant, using real options

A szerző egy, a szennyezőanyag-kibocsátás európai kereskedelmi rendszerében megfelelésre kötelezett gázturbinás erőmű szén-dioxid-kibocsátását modellezi négy termékre (völgy- és csúcsidőszaki áramár, gázár, kibocsátási kvóta) vonatkozó reálopciós modell segítségével. A profitmaximalizáló erőmű csak abban az esetben termel és szennyez, ha a megtermelt áramon realizálható fedezete pozitív. A jövőbeli időszak összesített szén-dioxid-kibocsátása megfeleltethető európai típusú bináris különbözetopciók összegének. A modell keretein belül a szén-dioxid-kibocsátás várható értékét és sűrűségfüggvényét becsülhetjük, az utóbbi segítségével a szén-dioxid-kibocsátási pozíció kockáztatott értékét határozhatjuk meg, amely az erőmű számára előírt megfelelési kötelezettség teljesítésének adott konfidenciaszint melletti költségét jelenti. A sztochasztikus modellben az alaptermékek geometriai Ornstein-Uhlenbeck-folyamatot követnek. Ezt illesztette a szerző a német energiatőzsdéről származó publikus piaci adatokra. A szimulációs modellre támaszkodva megvizsgálta, hogy a különböző technológiai és piaci tényezők ceteris paribus megváltozása milyen hatással van a megfelelés költségére, a kockáztatott értékére. ______ The carbon-dioxide emissions of an EU Emissions Trading System participant, gas-fuelled power generator are modelled by using real options for four underlying instruments (peak and off-peak electricity, gas, emission quota). This profit-maximizing power plant operates and emits pollution only if its profit (spread) on energy produced is positive. The future emissions can be estimated by a sum of European binary-spread options. Based on the real-option model, the expected value of emissions and its probability-density function can be deducted. Also calculable is the Value at Risk of emission quota position, which gives the cost of compliance at a given confidence level. To model the prices of the four underlying instruments, the geometric Ornstein-Uhlenbeck process is supposed and matched to public available price data from EEX. Based on the simulation model, the effects of various technological and market factors are analysed for the emissions level and the cost of compliance.

Parameter optimization for noise and vibration reduction associated with position and speed sensorless control of permanent magnet machines at low speed

With the advantages and popularity of Permanent Magnet (PM) motors due to their high power density, there is an increasing incentive to use them in variety of applications including electric actuation. These applications have strict noise emission standards. The generation of audible noise and associated vibration modes are characteristics of all electric motors, it is especially problematic in low speed sensorless control rotary actuation applications using high frequency voltage injection technique. This dissertation is aimed at solving the problem of optimizing the sensorless control algorithm for low noise and vibration while achieving at least 12 bit absolute accuracy for speed and position control. The low speed sensorless algorithm is simulated using an improved Phase Variable Model, developed and implemented in a hardware-in-the-loop prototyping environment. Two experimental testbeds were developed and built to test and verify the algorithm in real time.^ A neural network based modeling approach was used to predict the audible noise due to the high frequency injected carrier signal. This model was created based on noise measurements in an especially built chamber. The developed noise model is then integrated into the high frequency based sensorless control scheme so that appropriate tradeoffs and mitigation techniques can be devised. This will improve the position estimation and control performance while keeping the noise below a certain level. Genetic algorithms were used for including the noise optimization parameters into the developed control algorithm.^ A novel wavelet based filtering approach was proposed in this dissertation for the sensorless control algorithm at low speed. This novel filter was capable of extracting the position information at low values of injection voltage where conventional filters fail. This filtering approach can be used in practice to reduce the injected voltage in sensorless control algorithm resulting in significant reduction of noise and vibration.^ Online optimization of sensorless position estimation algorithm was performed to reduce vibration and to improve the position estimation performance. The results obtained are important and represent original contributions that can be helpful in choosing optimal parameters for sensorless control algorithm in many practical applications.^

A hermeneutic phenomenology of graduate education students' understandings of instructor power in a higher education classroom

Higher education is a distribution center of knowledge and economic, social, and cultural power (Cervero & Wilson, 2001). A critical approach to understanding a higher education classroom begins with recognizing the instructor's position of power and authority (Tisdell, Hanley, & Taylor, 2000). The power instructors wield exists mostly unquestioned, allowing for teaching practices that reproduce the existing societal patterns of inequity in the classroom (Brookfield, 2000). ^ The purpose of this hermeneutic phenomenological study was to explore students' experiences with the power of their instructors in a higher education classroom. A hermeneutic phenomenological study intertwines the interpretations of both the participants and the researcher about a lived experience to uncover layers of meaning because the meanings of lived experiences are usually not readily apparent (van Manen, 1990). Fifteen participants were selected using criterion, convenience, and snowball sampling. The primary data gathering method were semi-structured interviews guided by an interview protocol (Creswell, 2003). Data were interpreted using thematic reflection (van Manen, 1990). ^ Three themes emerged from data interpretation: (a) structuring of instructor-student relationships, (b) connecting power to instructor personality, and (c) learning to navigate the terrains of higher education. How interpersonal relationships were structured in a higher education classroom shaped how students perceived power in that higher education classroom. Positive relationships were described using the metaphor of family and a perceived ethic of caring and nurturing by the instructor. As participants were consistently exposed to exercises of instructor power in a higher education classroom, they attributed those exercises of power to particular instructor traits rather than systemic exercises of power. As participants progressed from undergraduate to graduate studies, they perceived the benefits of expertise in content or knowledge development as secondary to expertise in successfully navigating the social, cultural, political, and interpersonal terrains of higher education. Ultimately, participants expressed that higher education is not about what you know; it is about learning how to play the game. Implications for teaching in higher education and considerations for future research conclude the study.^

Rowing Biomechanics: Technique Changes with an Increase of Power Demand

The sport of rowing has become more popular in the past decade. While it is a relatively low impact sport, injuries can occur, specifically to the ribs (Karlson K. A., 1998) and more often in female athletes (Hickey, Fricker, & McDonald , 1997). It has been proposed that as the athlete rows, applying a cyclical load to the body, the mid trapezius fatigues and is unable to resist the force produced during the drive phase (Warden S. J., Gutschlag, Wajswelner, & Crossley, 2002). Once this happens, the scapulae are then pulled anterio-laterally which increases the compression force on the ribs, increasing the risk of injury. The rowing motion of 12 female varsity and club rowers was tracked as they completed a fatiguing rowing test on a rowing ergometer. Results showed that the curvature of thoracic spine changed throughout the rowing cycle but did not change with increasing power level. The transverse shoulder angle decreased (the upper back was less straight) as power level increased (R2=-0.69±19), suggesting that the scapula moved anterio-laterally. This may be that as it tired, the mid-trapezius was unable to hold the scapulae in position. The decreasing transverse shoulder angle when the power level is increased indirectly supports the fatiguing of the retractor muscles as a mechanism of injury. It would be valuable to understand the limitations of each athlete and to be able to prescribe the optimal training zone to reduce the risk of injury.

Koffeinets ergogena effekter på power i överkropp

Koffein har sedan 1962 fram och tillbaka varit dopingklassat men är sedan 2004 ett tillåtet ergogent preparat inom idrotten. Flera studier har visat positiva resultat i uthållighetsidrotter och på maximal styrkeförmåga. Syftet med denna studie var att se om koffein har någon ergogen effekt på power i överkroppsmuskulaturen. I denna studie användes en dubbel-blindad, randomiserad cross-over design. En slumpmässig indelning inför det första testtillfället avgjorde ifall deltagarna började studien med koffein- eller placebosupplementering och bytte sedan supplementering inför testtillfälle två. Som supplementeringsmetod användes koffein i tuggummiform på grund av att det ger ett snabbare upptag. Power mättes genom testet sittande stöt med en kula på 5 kg. Resultatet visar på en mycket svag (ES=0,13) positiv förbättring av stötlängderna mellan interventionerna. En av anledningarna till det triviala resultatet tros kunna bero på att det urval som användes ej bestod av en homogengrupp vad gäller träningsbakgrund och prestationsnivå. På grund av detta är det svårt att dra några slutsatser om koffeinet har eller inte har några ergogena effekter på power i överkroppen.

Power relations and good governance: a social network analysis of the evolution of the integrity in public office act in the Commonwealth of Dominica

La Banque mondiale propose la bonne gouvernance comme la stratégie visant à corriger les maux de la mauvaise gouvernance et de faciliter le développement dans les pays en développement (Carayannis, Pirzadeh, Popescu & 2012; & Hilyard Wilks 1998; Leftwich 1993; Banque mondiale, 1989). Dans cette perspective, la réforme institutionnelle et une arène de la politique publique plus inclusive sont deux stratégies critiques qui visent à établir la bonne gouvernance, selon la Banque et d’autres institutions de Bretton Woods. Le problème, c’est que beaucoup de ces pays en voie de développement ne possèdent pas l’architecture institutionnelle préalable à ces nouvelles mesures. Cette thèse étudie et explique comment un état en voie de développement, le Commonwealth de la Dominique, s’est lancé dans un projet de loi visant l’intégrité dans la fonction publique. Cette loi, la Loi sur l’intégrité dans la fonction publique (IPO) a été adoptée en 2003 et mis en œuvre en 2008. Cette thèse analyse les relations de pouvoir entre les acteurs dominants autour de évolution de la loi et donc, elle emploie une combinaison de technique de l’analyse des réseaux sociaux et de la recherche qualitative pour répondre à la question principale: Pourquoi l’État a-t-il développé et mis en œuvre la conception actuelle de la IPO (2003)? Cette question est d’autant plus significative quand nous considérons que contrairement à la recherche existante sur le sujet, l’IPO dominiquaise diverge considérablement dans la structure du l’IPO type idéal. Nous affirmons que les acteurs "rationnels," conscients de leur position structurelle dans un réseau d’acteurs, ont utilisé leurs ressources de pouvoir pour façonner l’institution afin qu’elle serve leurs intérêts et ceux et leurs alliés. De plus, nous émettons l’hypothèse que: d’abord, le choix d’une agence spécialisée contre la corruption et la conception ultérieure de cette institution reflètent les préférences des acteurs dominants qui ont participé à la création de ladite institution et la seconde, notre hypothèse rivale, les caractéristiques des modèles alternatifs d’institutions de l’intégrité publique sont celles des acteurs non dominants. Nos résultats sont mitigés. Le jeu de pouvoir a été limité à un petit groupe d’acteurs dominants qui ont cherché à utiliser la création de la loi pour assurer leur légitimité et la survie politique. Sans surprise, aucun acteur n’a avancé un modèle alternatif. Nous avons conclu donc que la loi est la conséquence d’un jeu de pouvoir partisan. Cette recherche répond à la pénurie de recherche sur la conception des institutions de l’intégrité publique, qui semblent privilégier en grande partie un biais organisationnel et structurel. De plus, en étudiant le sujet du point de vue des relations de pouvoir (le pouvoir, lui-même, vu sous l’angle actanciel et structurel), la thèse apporte de la rigueur conceptuelle, méthodologique, et analytique au discours sur la création de ces institutions par l’étude de leur genèse des perspectives tant actancielles que structurelles. En outre, les résultats renforcent notre capacité de prédire quand et avec quelle intensité un acteur déploierait ses ressources de pouvoir.

Why Does Employment Discrimination Persist against People with Mental Illness? Effects of Negative Stereotypes, Power, and Differential Discrimination

Mental illness affects a sizable minority of Americans at any given time, yet many people with mental illness (hereafter PWMI) remain unemployed or underemployed relative to the general population. Research has suggested that part of the reason for this is discrimination toward PWMI. This research investigated mechanisms that affect employment discrimination against PWMI. Drawing from theories on stigma and power, three studies assessed 1) the stereotyping of workers with mental illness as unfit for workplace success, 2) the impact of positive information on countering these negative stereotypes, and whether negatively-stereotyped conditions elicited discrimination; and 3) the effects of power on mental illness stigma components. I made a series of predictions related to theories on the Stereotype Content Model, illness attribution, the contact hypothesis, gender and mental health, and power. Studies tested predictions using, 1) an online vignette survey measuring attitudes, 2) an online survey measuring responses to fictitious applications for a middle management position, and 3) a laboratory experiment in which some participants were primed to feel powerful and some were not. Results of Study 1 demonstrated that PWMI were routinely stigmatized as incompetent, dangerous, and lacking valued employment attributes, relative to a control condition. This was especially evident for workers presented as having PTSD from wartime service and workers with schizophrenia, and when the worker was a woman. Study 2 showed that, although both war-related PTSD and schizophrenia evoke negative stereotypes, only schizophrenia evoked hiring discrimination. Finally, Study 3 found no effect of being primed to feel powerful on stigmatizing attitudes toward a person with symptoms of schizophrenia. Taken together, findings suggest that employment discrimination towards PWMI is driven by negative stereotypes; but, stereotypes might not lead to actual hiring discrimination for some labeled individuals.

Location dependence of a MEMS electromagnetic transducer with respect to an AC power source

A MEMS, silicon based device with a cantilever oscillationsand an integrated magnet is presented for magnetic to electrical transduction. The cantilever structure can be configured either as an energy harvester to harvest power from an AC power line or as an AC current sensor. The positioning of the transducer with respect to the AC conductor is critical in both scenarios. For the energy scavenger, correct positioning is required to optimize the harvested power. For the current sensor, it is necessary to optimise the sensitivity of the sensor. This paper considers the effect of the relative position of the transducer with respect to the wire on the resulting electromagnetic forces and torques driving the device. It is shown here that the magnetic torque acting on a cantilever beam with an integrated magnet and in the vicinity of an alternating electromagnetic field is a very significant driver of the cantilever oscillations.

Locating the maximum power point for thermoelectric generators for constant heat operation

Thermoelectric generators (TEGs) are solid-state devices that can be used for the direct conversion between heat and electricity. These devices are an attractive option for generating clean energy from heat. There are two modes of operation for TEGs; constant heat and constant temperature. It is a well-known fact that for constant temperature operation, TEGs have a maximum power point lying at half the open circuit voltage of the TEG, for a particular temperature. This work aimed to investigate the position of the maximum power point for Bismuth Telluride TEGs working under constant heat conditions i.e. the heat supply to the TEG is fixed however the temperature across the TEG can vary depending upon its operating conditions. It was found that for constant heat operation, the maximum power point for a TEG is greater than half the open circuit voltage of the TEG.

Analysis and design considerations of resonator arrays for inductive power transfer systems

In the frame of inductive power transfer (IPT) systems, arrays of magnetically coupled resonators have received increasing attention as they are cheap and versatile due to their simple structure. They consist of magnetically coupled coils, which resonate with their self-capacitance or lumped capacitive networks. Of great industrial interest are planar resonator arrays used to power a receiver that can be placed at any position above the array. A thorough circuit analysis has been carried out, first starting from traditional two-coil IPT devices. Then, resonator arrays have been introduced, with particular attention to the case of arrays with a receiver. To evaluate the system performance, a circuit model based on original analytical formulas has been developed and experimentally validated. The results of the analysis also led to the definition of a new doubly-fed array configuration with a receiver that can be placed above it at any position. A suitable control strategy aimed at maximising the transmitted power and the efficiency has been also proposed. The study of the array currents has been carried out resorting to the theory of magneto-inductive waves, allowing useful insight to be highlighted. The analysis has been completed with a numerical and experimental study on the magnetic field distribution originating from the array. Furthermore, an application of the resonator array as a position sensor has been investigated. The position of the receiver is estimated through the measurement of the array input impedance, for which an original analytical expression has been also obtained. The application of this sensing technique in an automotive dynamic IPT system has been discussed. The thesis concludes with an evaluation of the possible applications of two-dimensional resonator arrays in IPT systems. These devices can be used to improve system efficiency and transmitted power, as well as for magnetic field shielding.

Adaptações cardio-respiratorias em atletas : estudo em diferentes fases do treinamento fisico

Universidade Estadual de Campinas. Faculdade de Educação Física