海洋聚磷菌Halomonas YSR-3的除磷特性研究

本论文报道从海洋中分离到的一株聚磷菌的分离、鉴定、在系统发育中的地位、除磷特性、菌体内多磷酸盐颗粒的研究、D-海因酶和核苷二磷酸激酶基因的克隆及序列分析，为海水系统的生物除磷提供部分基础资料。 从黄海海域分离到聚磷菌Halomonas sp. YSR-3，菌体呈杆状，大小为3.5 μm×1 μm，革兰氏阴性，好氧生长，能运动。透射电镜观察发现，菌体内有致密颗粒。经DAPI染色确定该致密颗粒是多磷酸盐，亦可称为异染粒、迂回体。16S rDNA鉴定结果表明，YSR-3与Halomonas属中的marine bacterium B5-7有较高的同源性，相似值99%。YSR-3的生理生化特性：对氯霉素和卡那霉素敏感；淀粉水解呈阳性；反硝化和几丁质降解呈阴性；能将葡萄糖作为唯一碳源和能源。 对YSR-3的培养条件进行优化。以海水2216培养基、24 ℃、180 rpm、pH 6.5的条件培养，更利于菌体生长和菌体内多磷酸盐的形成。 对YSR-3的除磷特性进行研究。无磷培养时，菌体不能生长；用磷酸钾盐作为磷源时，菌体生长较好，形成多磷酸盐的菌体比例较高；较适合YSR-3菌体生长和多磷酸盐形成的磷源是KH2PO4，较适磷浓度为1.5 mmol/L。pH的变化影响菌株的生长、多磷酸盐形成和除磷效果。pH值为5时，菌体的数量几乎不增加，体内多磷酸盐和培养基中磷含量变化不大；pH值为6、7和8时，菌体生长良好，95%以上的菌体内形成多磷酸盐，培养基中磷含量明显下降。YSR-3在不同培养基中除磷量和除磷率不同。在高磷培养基中除磷量为0.7 mmol/L(磷含量由1.84 mmol/L降到1.14 mmol/L)，除磷率为37.5%；在低磷培养基中除磷量为0.02 mmol/L(磷含量由0.028 mmol/L降到0.008 mmol/L)，除磷率为72.2%。 以海洋聚磷菌Halomonas sp. YSR-3的总DNA为模板，用PCR法扩增D-海因酶基因和核苷二磷酸激酶基因，将扩增片段克隆到pGM-T载体，转化E.coli TOP10菌株，经蓝白斑筛选、菌落PCR得到阳性克隆，测序后对序列进行Blast比对分析。得到的D-海因酶基因序列长度为1510 bp，与Pseudomonas entomophila L48的海因酶基因序列的相似性为77%。翻译后的序列与Pseudomonas fluorescens Pf-5，Marinomonas sp. MED121，Burkholderia vietnamiensis G4的海因酶蛋白序列相似性分别为75%，73%，70%。得到的核苷二磷酸激酶基因序列长度为420bp，翻译后的序列与Loktanella vestfoldensis SKA53，Jannaschia sp. CCS1，Roseobacter sp. CCS2的核苷二磷酸激酶蛋白序列相似性分别为89%，86%，85%。 聚磷菌能将外界环境中的磷吸收到体内，并以多磷酸盐的形式储存。多磷酸盐对于细胞的生存和生长有很重要的作用，但目前对于多磷酸盐的形成过程以及过程调控还不是很清楚。在今后可以通过构建高效表达的重组菌，提高与除磷相关的酶的纯度及活性。同时可以将相关酶的基因进行突变，对基因表达的调控以及酶的代谢以及功能结构等多方面进行基础研究，使聚磷菌在生物除磷中得到广泛应用。

On the contribution of stereochemistry to human ITPK1 specificity: Ins(1,4,5,6)P4 is not a physiologic substrate

Ins(1,4,5,6)P4, a biologically active cell constituent, was recently advocated as a substrate of human Ins(3,4,5,6)P4 1-kinase (hITPK1), because stereochemical factors were believed relatively unimportant to specificity [Miller, G.J. Wilson, M.P. Majerus, P.W. and Hurley, J.H. (2005) Specificity determinants in inositol polyphosphate synthesis: crystal structure of inositol 1,3,4-triphosphate 5/6-kinase. Mol. Cell. 18, 201-212]. Contrarily, we provide three examples of hITPK1 stereospecificity. hITPK1 phosphorylates only the 1-hydroxyl of both Ins(3,5,6)P3 and the meso-compound, Ins(4,5,6)P3. Moreover, hITPK1 has >13,000-fold preference for Ins(3,4,5,6)P4 over its enantiomer, Ins(1,4,5,6)P4. The biological significance of hITPK1 being stereospecific, and not physiologically phosphorylating Ins(1,4,5,6)P4, is reinforced by our demonstrating that Ins(1,4,5,6)P4 is phosphorylated (K(m) = 0.18 microM) by inositolphosphate-multikinase.

Inactivating mutations in an SH2 domain-encoding gene in X-linked lymphoproliferative syndrome

X-linked lymphoproliferative syndrome (XLP) is an inherited immunodeficiency characterized by increased susceptibility to Epstein-Barr virus (EBV). In affected males, primary EBV infection leads to the uncontrolled proliferation of virus-containing B cells and reactive cytotoxic T cells, often culminating in the development of high-grade lymphoma. The XLP gene has been mapped to chromosome band Xq25 through linkage analysis and the discovery of patients harboring large constitutional genomic deletions. We describe here the presence of small deletions and intragenic mutations that specifically disrupt a gene named DSHP in 6 of 10 unrelated patients with XLP. This gene encodes a predicted protein of 128 amino acids composing a single SH2 domain with extensive homology to the SH2 domain of SHIP, an inositol polyphosphate 5-phosphatase that functions as a negative regulator of lymphocyte activation. DSHP is expressed in transformed T cell lines and is induced following in vitro activation of peripheral blood T lymphocytes. Expression of DSHP is restricted in vivo to lymphoid tissues, and RNA in situ hybridization demonstrates DSHP expression in activated T and B cell regions of reactive lymph nodes and in both T and B cell neoplasms. These observations confirm the identity of DSHP as the gene responsible for XLP, and suggest a role in the regulation of lymphocyte activation and proliferation. Induction of DSHP may sustain the immune response by interfering with SHIP-mediated inhibition of lymphocyte activation, while its inactivation in XLP patients results in a selective immunodeficiency to EBV.

Biological phosphorus removal during high-rate, low-temperature, anaerobic digestion of wastewater.

We report, for the first time, extensive biologically-mediated phosphate removal from wastewater during high-rate anaerobic digestion (AD). A hybrid sludge bed/fixed-film (packed pumice stone) reactor was employed for low-temperature (12°C) anaerobic treatment of synthetic sewage wastewater. Successful phosphate removal from the wastewater (up to 78% of influent phosphate) was observed, mediated by biofilms in the reactor. Scanning electron microscopy and energy dispersive X-ray analysis revealed the accumulation of elemental phosphorus (~2%) within the sludge bed and fixed-film biofilms. 4’, 6-diamidino-2-phenylindole (DAPI) staining indicated phosphorus accumulation was biological in nature and mediated through the formation of intracellular inorganic polyphosphate (polyP) granules within these biofilms. DAPI staining further indicated that polyP accumulation was rarely associated with free cells. Efficient and consistent chemical oxygen demand (COD) removal was recorded, throughout the 732-day trial, at applied organic loading rates between 0.4-1.5 kg COD m-3 d-1 and hydraulic retention times of 8-24 hours, while phosphate removal efficiency ranged from 28-78% on average per phase. Analysis of protein hydrolysis kinetics and the methanogenic activity profiles of the biomass revealed the development, at 12˚C, of active hydrolytic and methanogenic populations. Temporal microbial changes were monitored using Illumina Miseq analysis of bacterial and archaeal 16S rRNA gene sequences. The dominant bacterial phyla present in the biomass at the conclusion of the trial were the Proteobacteria and Firmicutes and the dominant archaeal genus was Methanosaeta. Trichococcus and Flavobacterium populations, previously associated with low temperature protein degradation, developed in the reactor biomass. The presence of previously characterised polyphosphate accumulating organisms (PAOs) such as Rhodocyclus, Chromatiales, Actinobacter and Acinetobacter was recorded at low numbers. However, it is unknown as yet if these were responsible for the luxury polyP uptake observed in this system. The possibility of efficient phosphate removal and recovery from wastewater during AD would represent a major advance in the scope for widespread application of anaerobic wastewater treatment technologies.

Full-scale biological phosphorus removal: quantification of storage polymers, microbial performance and metabolic modelling

Dissertação para obtenção do Grau de Doutor em Engenharia Química e Bioquímica

The effect of key process operational conditions on enhanced biological phosphorus removal from wastewater

Enhanced biological phosphorus removal (EBPR) is the most economic and sustainable option used in wastewater treatment plants (WWTPs) for phosphorus removal. In this process it is important to control the competition between polyphosphate accumulating organisms (PAOs) and glycogen accumulating organisms (GAOs), since EBPR deterioration or failure can be related with the proliferation of GAOs over PAOs. This thesis is focused on the effect of operational conditions (volatile fatty acid (VFA) composition, dissolved oxygen (DO) concentration and organic carbon loading) on PAO and GAO metabolism. The knowledge about the effect of these operational conditions on EBPR metabolism is very important, since they represent key factors that impact WWTPs performance and sustainability. Substrate competition between the anaerobic uptake of acetate and propionate (the main VFAs present in WWTPs) was shown in this work to be a relevant factor affecting PAO metabolism, and a metabolic model was developed that successfully describes this effect. Interestingly, the aerobic metabolism of PAOs was not affected by different VFA compositions, since the aerobic kinetic parameters for phosphorus uptake, polyhydroxyalkanoates (PHAs) degradation and glycogen production were relatively independent of acetate or propionate concentration. This is very relevant for WWTPs, since it will simplify the calibration procedure for metabolic models, facilitating their use for full-scale systems. The DO concentration and aerobic hydraulic retention time (HRT) affected the PAO-GAO competition, where low DO levels or lower aerobic HRT was more favourable for PAOs than GAOs. Indeed, the oxygen affinity coefficient was significantly higher for GAOs than PAOs, showing that PAOs were far superior at scavenging for the often limited oxygen levels in WWTPs. The operation of WWTPs with low aeration is of high importance for full-scale systems, since it decreases the energetic costs and can potentially improve WWTP sustainability. Extended periods of low organic carbon load, which are the most common conditions that exist in full-scale WWTPs, also had an impact on PAO and GAO activity. GAOs exhibited a substantially higher biomass decay rate as compared to PAOs under these conditions, which revealed a higher survival capacity for PAOs, representing an advantage for PAOs in EBPR processes. This superior survival capacity of PAOs under conditions more closely resembling a full-scale environment was linked with their ability to maintain a residual level of PHA reserves for longer than GAOs, providing them with an effective energy source for aerobic maintenance processes. Overall, this work shows that each of these key operational conditions play an important role in the PAO-GAO competition and should be considered in WWTP models in order to improve EBPR processes.

Exome sequencing identifies INPPL1 mutations as a cause of opsismodysplasia.

Opsismodysplasia (OPS) is a severe autosomal-recessive chondrodysplasia characterized by pre- and postnatal micromelia with extremely short hands and feet. The main radiological features are severe platyspondyly, squared metacarpals, delayed skeletal ossification, and metaphyseal cupping. In order to identify mutations causing OPS, a total of 16 cases (7 terminated pregnancies and 9 postnatal cases) from 10 unrelated families were included in this study. We performed exome sequencing in three cases from three unrelated families and only one gene was found to harbor mutations in all three cases: inositol polyphosphate phosphatase-like 1 (INPPL1). Screening INPPL1 in the remaining cases identified a total of 12 distinct INPPL1 mutations in the 10 families, present at the homozygote state in 7 consanguinous families and at the compound heterozygote state in the 3 remaining families. Most mutations (6/12) resulted in premature stop codons, 2/12 were splice site, and 4/12 were missense mutations located in the catalytic domain, 5-phosphatase. INPPL1 belongs to the inositol-1,4,5-trisphosphate 5-phosphatase family, a family of signal-modulating enzymes that govern a plethora of cellular functions by regulating the levels of specific phosphoinositides. Our finding of INPPL1 mutations in OPS, a severe spondylodysplastic dysplasia with major growth plate disorganization, supports a key and specific role of this enzyme in endochondral ossification.

Red blood cell-derived microparticles isolated from blood units initiate and propagate thrombin generation.

BACKGROUND: Red blood cell-derived microparticles (RMPs) are small phospholipid vesicles shed from RBCs in blood units, where they accumulate during storage. Because microparticles are bioactive, it could be suggested that RMPs are mediators of posttransfusion complications or, on the contrary, constitute a potential hemostatic agent. STUDY DESIGN AND METHODS: This study was performed to establish the impact on coagulation of RMPs isolated from blood units. Using calibrated automated thrombography, we investigated whether RMPs affect thrombin generation (TG) in plasma. RESULTS: We found that RMPs were not only able to increase TG in plasma in the presence of a low exogenous tissue factor (TF) concentration, but also to initiate TG in plasma in absence of exogenous TF. TG induced by RMPs in the absence of exogenous TF was neither affected by the presence of blocking anti-TF nor by the absence of Factor (F)VII. It was significantly reduced in plasma deficient in FVIII or F IX and abolished in FII-, FV-, FX-, or FXI-deficient plasma. TG was also totally abolished when anti-XI 01A6 was added in the sample. Finally, neither Western blotting, flow cytometry, nor immunogold labeling allowed the detection of traces of TF antigen. In addition, RMPs did not comprise polyphosphate, an important modulator of coagulation. CONCLUSIONS: Taken together, our data show that RMPs have FXI-dependent procoagulant properties and are able to initiate and propagate TG. The anionic surface of RMPs might be the site of FXI-mediated TG amplification and intrinsic tenase and prothrombinase complex assembly.

Caracterització i revaloració de la fracció plasmàtica de la sang de porc procedent d'escorxadors industrials

La tesi s'ha estructurat en tres apartats que, en conjunt, han de permetre determinar les possibilitats d'aprofitament dins la mateixa indústria alimentària de la fracció plasmàtica de la sang de porc generada per escorxadors que utilitzen sistemes oberts de recollida higiènica. 1. En la primera part s'analitza la composició de la sang higiènica que s'està recollint actualment i s'estudien les característiques tant físico-químiques com microbiològiques que determinen la seva qualitat. La caracterització s'ha realitzat amb sang recollida en diferents escorxadors industrials de les comarques de Girona i s'ha centrat principalment en l'estudi de la contaminació microbiològica i el nivell d'hemòlisi de la sang. S'ha fet un disseny experimental que ha permès alhora valorar l'efecte d'alguns factors sobre la qualitat de la sang: possibles diferències relacionades amb (1) la climatologia del període de l'any en el qual es fa la recollida, (2) particularitats dels escorxadors (grandària, sistemes de dessagnat, tipus, dosi i sistema de dosificació de l'anticoagulant, condicions de processament, maneig i emmagatzematge després de la recollida, etc.). Els resultats obtinguts ens permeten constatar que, en les condicions actuals, la sang que s'està recollint en els escorxadors estudiats no es pot considerar adequada per a una matèria primera de productes destinats a alimentació humana. La major part de la microbiota contaminant s'adquireix en el propi sagnador. S'ha constatat que el sistema de dessagnat en posició horitzontal podria ser una mesura útil per minimitzar la contaminació d'origen fecal o provinent de la pell de l'animal sacrificat i que la separació immediata de les fraccions en el propi escorxador també pot contribuir a reduir la contaminació. Així doncs, en el benentès que l'efectivitat pot obtenir-se del conjunt de mesures preses, més que de l'aplicació d'una sola d'elles, es suggereix la introducció d'una sèrie d'actuacions que potser permetrien reduir els nivells de contaminació que s'obtenen actualment. El tractament mecànic de la sang, el sistema d'addició d'anticoagulant, el volum i concentració de la solució anticoagulant afegida i el període d'emmagatzematge són els factors responsables de l'hemòlisi; mentre que nivells elevats de contaminació microbiològica i el tipus d'anticoagulant utilitzat deterrminen la velocitat d'increment de l'hemòlisi de sang refrigerada. S'ha constatat que quan la sang no pot ser processada immediatament i s'ha d'emmagatzemar en refrigeració és millor utilitzar citrat sòdic enlloc de polifosfat com a anticoagulant ja que l'increment d'hemòlisi es dóna més lentament. 2. El segon apartat s'ha centrat en la fracció plasmàtica de la sang. S'ha utilitzat la deshidratació per atomització com a tecnologia de conservació del plasma i s'ha fet una caracterització del producte en pols resultant des del punt de vista de composició i qualitat. A més de la contaminació microbiològica, que determina la qualitat higiènico-sanitària del producte, s'ha realitzat un estudi de les propietats funcionals que podrien fer del plasma un producte útil en la formulació d'aliments (capacitat escumant, emulsionant, gelificant). S'ha fet especial incidència en (1) determinar l'efecte del procés tecnològic de deshidratació sobre la funcionalitat del producte i (2) estudiar l'estabilitat del plasma deshidratat durant el període d'emmagatzematge. En les condicions de deshidratació per atomització aplicades no es provoca desnaturalització de la fracció proteica i s'obté un producte suficientment deshidratat, amb una aw<0,4 per permetre suposar una bona estabilitat. Algunes mostres de plasma deshidratat analitzades presenten nivells detectables de determinats residus (sulfonamides i corticosteroides). La qualitat microbiològica del producte en pols reflecteix l'elevada contaminació que contenia la matèria primera utilitzada, tot i que la deshidratació per atomització ha comportat la reducció en una unitat logarítmica de la càrrega contaminant. Els recomptes generals de microorganismes són encara preocupants i més tenint en compte que s'ha evidenciat la presència de toxines estafilocòciques en algunes mostres. L'avaluació de les propietats funcionals del producte deshidratat en relació a les que presentava el plasma líquid ens ha permès comprovar que: (1) El procés de deshidratació no ha afectat la solubilitat de les proteïnes. Això, junt amb el fet que no s'obtinguin diferències significatives en l'anàlisi calorimètrica de mostres líquides o deshidratades, permet concloure que el procés no provoca desnaturalització proteica. (2) No s'observen efectes negatius del procés tecnològic sobre la capacitat escumant ni en l'activitat emulsionant de les proteïnes plasmàtiques, dues propietats funcionals que possibiliten l'aplicació del plasma amb aquestes finalitats en l'elaboració d'alguns aliments. (3) La deshidratació tampoc perjudica de manera important les característiques dels gels que s'obtenen per escalfament, ja que els gels obtinguts a partir del plasma líquid i del plasma deshidratat presenten la mateixa capacitat de retenció d'aigua i no s'observen diferències en la microestructura de la xarxa proteica d'ambdós tipus de gel. Tanmateix, els que s'obtenen a partir del producte en pols mostren una menor resistència a la penetració. L'estudi d'estabilitat ens ha permès comprovar que la mostra de plasma deshidratat per atomització perd algunes de les seves propietats funcionals (facilitat de rehidratació, capacitat de retenció d'aigua i fermesa dels gels) si s'emmagatzema a temperatura ambient, mentre que aquestes característiques es mantenen un mínim de sis mesos quan el producte en pols es conserva a temperatura de refrigeració. 3. En l'última part, tenint en compte les conclusions derivades dels resultats dels apartats anteriors, s'han assajat tres possibles sistemes de reducció de la contaminació aplicables a la fracció plasmàtica com a pas previ a la deshidratació, per tal de millorar les característiques de qualitat microbiològica i les perspectives d'estabilitat del producte durant l'emmagatzematge. S'ha determinat l'eficàcia, i l'efecte sobre les propietats del plasma deshidratat, que poden tenir tractaments d'higienització basats en la centrifugació, la microfiltració tangencial i l'aplicació d'altes pressions. Els tractaments de bactofugació aplicats permeten reduir entre el 96 i el 98% la contaminació microbiana del plasma. Aquesta reducció s'aconsegueix tant amb un sistema discontinu com amb un sistema continu treballant a una velocitat de 12 L/h, fet que permetria adaptar el tractament de bactofugació a un procés de producció industrial. Un sistema combinat de bactofugació en continu i microfiltració tangencial permet incrementar l'eficàcia fins a un 99,9 % de reducció. Cal tenir present, però, que aquest tractament provoca també una disminució de l'extracte sec que afecta negativament les propietats funcionals del plasma líquid. Malgrat suposar una pèrdua pel que fa al rendiment, aquest efecte negatiu sobre la funcionalitat no suposaria cap inconvenient si s'utilitzés la deshidratació com a tecnologia de conservació del plasma, ja que es podria corregir l'extracte sec durant la reconstitució del producte. Caldria avaluar si la millora en la qualitat higiènico-sanitària del producte compensa o no les pèrdues que suposa aquest sistema d'higienització combinat. Amb relació als tractaments d'alta pressió, de totes les condicions de tractament assajades, les pressions de fins 450 MPa permeten obtenir plasma sense modificacions importants que impedeixin la seva deshidratació per atomització. Així doncs, les condicions de procés que s'han aplicat són pressuritzacions a 450 MPa de 15 minuts de durada. La temperatura de tractament que s'ha mostrat més eficaç en la reducció dels recomptes de microorganismes ha estat de 40ºC. Els tractaments a aquesta temperatura permeten assolir reduccions del 99,97% i disminuir en un 80% la capacitat de creixement dels microorganismes supervivents a la pressurització en relació a la que presentava la població contaminant del plasma abans del tractament. L'estudi de l'efecte d'aquest tractament (450 MPa, 15 min i 40ºC) sobre les propietats funcionals del plasma ha permès observar que la pressurització comporta una disminució en la solubilitat del producte però una millora en les propietats de superfície -estabilitat de l'escuma i activitat emulsionant- i un increment de la capacitat de retenció d'aigua i de la duresa dels gels obtinguts per escalfament. Calen més estudis per confirmar i caracteritzar aquesta millora en la funcionalitat, així com per establir si el tractament de pressurització afecta també l'estabilitat del producte durant l'emmagatzematge. De totes les tecnologies d'higienització assajades, l'alta pressió és la que permet obtenir millors resultats en el sentit de poder garantir un producte de bona qualitat microbiològica i segur, des del punt de vista sanitari i tecnològic, per a la seva utilització com a ingredient alimentari.

Melatonin and IP(3)-induced Ca(2+) Release from Intracellular Stores in the Malaria Parasite Plasmodium falciparum within Infected Red Blood Cells

IP(3)-dependent Ca(2+) signaling controls a myriad of cellular processes in higher eukaryotes and similar signaling pathways are evolutionarily conserved in Plasmodium, the intracellular parasite that causes malaria. We have reported that isolated, permeabilized Plasmodium chabaudi, releases Ca(2+) upon addition of exogenous IP(3). In the present study, we investigated whether the IP(3) signaling pathway operates in intact Plasmodium falciparum, the major disease-causing human malaria parasite. P. falciparum-infected red blood cells (RBCs) in the trophozoite stage were simultaneously loaded with the Ca(2+) indicator Fluo-4/AM and caged-IP(3). Photolytic release of IP(3) elicited a transient Ca(2+) increase in the cytosol of the intact parasite within the RBC. The intracellular Ca(2+) pools of the parasite were selectively discharged, using thapsigargin to deplete endoplasmic reticulum (ER) Ca(2+) and the antimalarial chloroquine to deplete Ca(2+) from acidocalcisomes. These data show that the ER is the major IP(3)-sensitive Ca(2+) store. Previous work has shown that the human host hormone melatonin regulates P. falciparum cell cycle via a Ca(2+)-dependent pathway. In the present study, we demonstrate that melatonin increases inositol-polyphosphate production in intact intraerythrocytic parasite. Moreover, the Ca(2+) responses to melatonin and uncaging of IP(3) were mutually exclusive in infected RBCs. Taken together these data provide evidence that melatonin activates PLC to generate IP(3) and open ER-localized IP(3)-sensitive Ca(2+) channels in P. falciparum. This receptor signaling pathway is likely to be involved in the regulation and synchronization of parasite cell cycle progression.

Design of LabVIEW® - based software for the control of sequential injection analysis instrumentation for the determination of morphine.

LabVIEW^®-based software for the automation of a sequential injection analysis instrument for the determination of morphine is presented. Detection was based on its chemiluminescence reaction with acidic potassium permanganate in the presence of sodium polyphosphate. The calibration function approximated linearity (range 5 × 10 ^-10 to 5 × 10 ^-6M) with a line of best fit of y = 1.05 x + 8.9164 (R² = 0.9959), where y is the log₁₀ signal (mV) and x is the log₁₀ morphine concentration (M). Precision, as measured by relative standard deviation, was 0.7% for five replicate analyses of morphine standard (5 × 10^-8_M). The limit of detection (3 σ) was determined as 5 × 10^-11 M morphine.

A rapid test for heroin (3,6-Diacetylmorphine) based on two chemiluminescence reactions

A rapid method for screening drug seizure samples for 3,6-diacetylmorphine (heroin), which consists of a simple hydrolysis procedure and flow-injection analysis with two chemiluminescence reagents, is described. Before hydrolysis, 3,6-diacetylmorphine evokes an intense response with a tris(2,2'-bipyridyl)ruthenium(III) reagent (prepared by dissolving the perchlorate salt in acetonitrile), and a relatively weak chemiluminescence response with a second reagent: potassium permanganate in an aqueous acidic polyphosphate solution. However, the permanganate reagent is extremely sensitive toward the hydrolysis products of 3,6-diacetylmorphine (i.e., 6-monoacetylmorphine and morphine). Some compounds commonly found in drug laboratories may cause false positives with tris(2,2'-bipyridyl)ruthenium(III), but do not produce the markedly increased response with the permanganate reagent after the hydrolysis procedure. The combination of these two tests therefore provides an effective presumptive test for the presence of 3,6-diacetylmorphine, which we have verified with 14 samples obtained from a forensic science laboratory.

Chemistry, spectroscopy and analytical applications of certain chemiluminescent reactions

Chemiluminescence, the production of light from a chemical reaction, has found widespread use in analytical chemistry. Both tris (2, 2’-bipyridyl) ruthenium (II) and acidic potassium permanganate are chemiluminescence reagents that have been employed for the determination of a diverse range of analytes. This thesis encompasses some fundamental investigations into the chemistry and spectroscopy of these chemiluminescence reactions as well as extending the scope of their analytical applications. Specifically, a simple and robust capillary electrophoresis chemiluminescence detection system for the determination of codeine, O6-methylcodeine and thebaine is described, based upon the reaction of these analytes with chemically generated tris(2,2'-bipyridyl)ruthenium(III) prepared in sulfuric acid (0.05 M). The reagent solution was contained in a glass detection cell, which also held both the capillary and the cathode. The resultant chemiluminescence was monitored directly using a photomultiplier tube mounted flush against the base of the detection cell. The methodology, which incorporated a field amplification sample introduction procedure, realised detection limits (3a baseline noise) of 5 x 10~8 M for both codeine and O6-methylcodeine and 1 x 10~7 M for thebaine. The relative standard deviations of the migration times and the peak areas for the three analytes ranged from 2.2 % up to 2.5 % and 1.9 % up to 4.6 % respectively. Following minor instrumental modifications, morphine, oripavine and pseudomorphine were determined based upon their reaction with acidic potassium permanganate in the presence of sodium polyphosphate. To ensure no migration of the permanganate anion occurred, the anode was placed at the detector end whilst the electroosmotic flow was reversed by the addition of hexadimethrine bromide (0.001% m/v) to the electrolyte. The three analytes were separated counter to the electroosmotic flow via their interaction with a-cyclodextrin. The methodology realised detection limits (3 x S/N) of 2.5 x 10~7 M for both morphine and oripavine and 5 x 10~7 M for pseudomorphine. The relative standard deviations of the migration times and the peak heights for the three analytes ranged from 0.6 % up to 0.8 % and 1.5% up to 2.1 % respectively. Further improvements were made by incorporating a co-axial sheath flow detection cell. The methodology was validated by comparing the results realised using this technique with those obtained by high performance liquid chromatography (HPLC), for the determination of both morphine and oripavine in seven industrial process liquors. A complimentary capillary electrophoresis procedure with UV-absorption detection was also developed and applied to the determination of morphine, codeine, oripavine and thebaine in nine process liquors. The results were compared with those achieved using a standard HPLC method. Although over eighty papers have appeared in the literature on the analytical applications of acidic potassium permanganate chemiluminescence, little effort has been directed towards identifying the origin of the luminescence. It was found that chemiluminescence was generated during the manganese(III), manganese(IV) and manganese(VII) oxidations of sodium borohydride, sodium dithionite, sodium sulfite and hydrazine sulfate in acidic aqueous solution. From the corrected chemiluminescence spectra, the wavelengths of maximum emission were 689 ± 5 nm and 734 ± 5 nm when the reactions were performed in sodium hexametaphosphate and sodium dihydrogenorthophosphate or orthophosphoric acid environments respectively. The corrected phosphorescence spectrum of manganese(II) sulfate in a solution of sodium hexametaphosphate at 77 K, exhibited two peaks with maxima at 688 nm and 730 nm. The chemical and spectroscopic evidence presented strongly supported the postulation that the emission was an example of solution phase chemically induced phosphorescence of manganese(II). Thereby confirming earlier predictions that the chemiluminescence from acidic potassium permanganate reactions originated from an excited manganese(II) species. Additionally, these findings have had direct analytical application in that manganese(IV) was evaluated as a new reagent for chemiluminescence detection. The oxidations of twenty five organic and inorganic species, with solublised manganese(IV), were found to elicit analytically useful chemiluminescence with detection limits (3 x S/N) for Mn(II), Fe(II), morphine and codeine of 5 x 10-8 M, 2.5 x 10-7 M, 7.5 x 10-8 M and 5 x 10-8M, respectively. The corrected emission spectra from four different analytes gave wavelengths of maximum emission in the range from 733 nm up to 740 nm indicating that these chemiluminescence reactions also shared a common emitting species, excited manganese(II). Whilst several analytical problems were addressed in this thesis and answers to certain questions regarding the fundamentals of acidic potassium permanganate chemiluminescence were proposed, there are several areas that would benefit from further research. These are outlined in the final chapter of this thesis.

Autocatalytic nature of permanganate oxidations exploited for highly sensitive chemiluminescence detection

Manganese(II) salts catalyze the chemiluminescent oxidation of organic compounds with acidic potassium permanganate. The formation of insoluble manganese(IV) species from the reaction between manganese(II) and permanganate can be prevented with sodium polyphosphate, and therefore, relatively high concentrations of the catalyst can be added to the reagent before the lightproducing reaction is initiated. The rapid and intense emissions from these manganese(II) catalyzed chemiluminescence reactions provide highly sensitive detection and greater compatibility with liquid chromatography.