984 resultados para plants per square meter
Resumo:
RESUMO: O objetivo deste trabalho foi avaliar o efeito do tratamento de sementes com inseticidas sobre o manejo de Dichelops melacanthus e a produtividade da soja e do milho, cultivados em sucessão. O estudo foi realizado em campo, nas safras 2012/2013 (I) e 2013/2014 (II). Avaliaram-se os inseticidas imidacloprido, tiametoxam, tiodicarbe, fipronil e abamectina. Determinaram-se: a densidade populacional do percevejo, a produtividade de soja e milho, e a intensidade da injúria em milho. A densidade do percevejo permaneceu abaixo de um inseto por metro quadrado, na maior parte do ciclo da soja. Os picos populacionais foram observados nas primeiras semanas, após a emergência do milho, e atingiram 2,2 (safra I) e 6,7 (safra II) percevejos por metro quadrado. Na cultura da soja, os inseticidas não reduziram a densidade populacional do percevejo. Na cultura do milho, o imidacloprido reduziu a densidade do percevejo em 23,2% (safra I) e 38,8% (safra II), e a injúria em 61,8% (safra I) e 26,4% (safra II). O tiametoxam reduziu a densidade dos insetos em 27,8% (safra II) e a injúria em 42,7% (safra I). O tratamento de sementes com inseticidas não proporciona aumento de produtividade à soja e ao milho, portanto, não se justifica sua utilização nas condições deste estudo. ABSTRACT: The objective of this work was to evaluate the effect of seed treatment with insecticides on the management of Dichelops melacanthus on the yield of soybean and corn, grown in succession. The study was carried out in a field, in the 2012/2013 (I) and 2013/2014 (II) crop seasons. The evaluated insecticides were: imidacloprid, thiamethoxam, thiodicarb, fipronil, and abamectin. The following were determined: stink bug population density, soybean and corn yield, and corn injury. Population density remained below one stink bug per square meter, in most of the soybean cycle. Population peaks were observed in the first weeks, after corn emergence, and they reached 2.2 (crop season I) and 6.7 (crop season II) stink bugs per square meter. In the soybean crop, the insecticides did not reduce the stink bug population density. In the corn crop, imidacloprid reduced the stink bug density in 23.2% (crop season I) and 38.8% (crop season II), and injury in 61.8% (crop season I) and 26.4% (crop season II). Thiamethoxam reduced the insect population density in 27.8% (crop season II) and injury in 42.7% (crop season I). Seed treatment with insecticides does not provide increase for soybean and corn yields, therefore, their use is not justified in this study's conditions.
Resumo:
Food production and consumption for cities has become a global concern due to increasing numbers of people living in urban areas, threatening food security. There is the contention that people living in cities have become disconnected with food production, leading to reduced nutrition in diets and increased food waste. Integrating food production into cities (urban agriculture) can help alleviate some of these issues. Lack of space at ground level in high-density urban areas has accelerated the idea of using spare building surfaces for food production. There are various growing methods being used for food production on buildings, which can be split into two main types, soil-less systems and soil-based systems. This paper is a holistic assessment (underpinned by the triple bottom line of sustainable development) of these two types of systems for food production on buildings, looking at the benefits and limitation of each type in this context. The results illustrate that soil-less systems are more productive per square metre, which increases the amount of locally grown, fresh produce available in urban areas. The results also show that soil-based systems for cultivation on buildings are more environmentally and socially beneficial overall for urban areas than soil-less systems.
Resumo:
The production and commercialization of citrus seedlings inspected and produced in protected screen-houses has become mandatory in Sao Paulo State, Brazil since January 2003. This law was intended to avoid the dispersion of Citrus Variegated Chlorosis (CVC), disease caused by Xylella fastidiosa. Our objective was to compare the yield over 8 years of `Natal` sweet orange trees grafted onto Rangpur lime obtained from healthy nursery plants and from plants artificially inoculated with X. fastidiosa. Yield was evaluated in an orchard planted in February 1999 with two treatments: (i) trees from healthy nursery plant, and (ii) trees from plants artificially inoculated with X. fastidiosa. The mean yield was 21% higher in trees from healthy nursery plants, as compared to trees from inoculated nursery plants. This difference represents a gain of approximately 203 boxes of 40.8 kg each, considering a planting density of 550 plants per hectare. (C) 2011 Elsevier B.V. All rights reserved.
Resumo:
Kudzu is a cover crop that has escaped cultivation in some subtropical and warm temperate regions. Kudzu has previously demonstrated broad intraspecific physiological plasticity while colonizing new environments. The objective of this paper was to investigate characteristics of kudzu leaflet anatomy that might contribute to its successful growth in climatically distinct environments, and to escape cultivation as well. Fresh and fixed leaflet strips of field-grown plants were analyzed. The lower epidermis of kudzu showed a higher frequency of stomata (147 ± 19 stomata mm-2) than the upper epidermis (26 ± 17 stomata mm-2). The average number of trichomes per square milimeter was 8 for both the upper and the lower epidermis. The average trichome length was 410 ± 200 mum for the upper epidermis and 460 ± 190 mum for the lower epidermis. Cuticle thickness was not considerably different between lower and upper epidermis. The leaflet blade consisted basically of two layers (upper and lower) of unicellular epidermis, two layers of palisade parenchyma and one layer of spongy parenchyma. One layer of paraveinal mesophyll was found between palisade and spongy parenchyma. In conclusion, leaflets of kudzu present anatomical characteristics that might contribute to the broad physiological plasticity shown by kudzu.
Resumo:
When referenced, the 2012 edition of the Iowa Department of Transportation’s (Iowa DOT) Standard Specifications for Highway and Bridge Construction shall be used for contract work awarded by the Iowa DOT. They may also be incorporated by reference in other contract work on secondary, urban, local systems, or other contract work in which the Iowa DOT has an interest. As modified by the General Supplemental Specifications, these Standard Specifications represent the minimum requirements and may be modified by Supplemental Specifications, Developmental Specifications, and Special Provisions on specific contracts. These Standard Specifications have been written so the Contractor’s responsibilities are indicated by plain language using the Imperative Mood and Active Voice form. Sentences are of the form: Construct isolation joints at all points where driveways meet other walks, curbs, or fixtures in the surface. Ensure finished members are true to detailed dimensions and free from twists, bends, open joints, or other defects resulting from faulty fabrication or defective work. Personnel preparing the JMF shall be Iowa DOT certified in bituminous mix design. The Contracting Authority’s responsibilities are (with some exceptions) indicated by the use of the modal verb “will”. Sentences are of the form: The Engineer will obtain and test density samples for each lot according to Materials I.M. 204. Payment will be the contract unit price for Fabric Reinforcement per square yard (square meter). These standard specifications contain dual units of measure: the United States Standard measure (English units) and the International System of Units (SI or “metric” units). The English units are expressed first then followed by the metric units in parentheses. The measurements expressed in the two systems are not necessarily equal. In some cases the measurements in metric units is a “hard” conversion of the English measurement; i.e. the metric unit has been approximated with a rounded, rationalized metric measurement that is easy to work with and remember. The proposal form will identify whether the work was designed and shall be constructed in English or metric units.
Leaf miner incidence in coffee plants under different drip irrigation regimes and planting densities
Resumo:
The objective of this work was to evaluate the effect of different drip irrigation regimes and planting densities on the incidence of the leaf miner, Leucoptera coffeella, in arabica coffee plants for one year. The experiment was carried out in 2008, in a complete randomized block design, in a split-plot in time arrangement, with four replicates. The treatments consisted of four drip irrigation regimes - soil water balance, irrigations at 20 and 60 kPa soil tensions, and a nonirrigated treatment -, which were distributed at three plant densities: 2, 500, 5, 000, and 10, 000 plants per hectare. The evaluations were made on a monthly basis between January and December 2008. The highest pest occurrence period was from August to November, a season with low-air relative humidity preceded by a drought period. Irrigated coffee plants showed an incidence of intact mines 2.2 times lower than that of nonirrigated plants. Irrigation and increasing of plant density contribute to the reduction of coffee leaf miner occurrence.
Resumo:
This work aimed to evaluate the influence of naphthaleneacetic acid (NAA) and gibberellic acid (GA3) plant regulators in in vitro etiolation and subsequent regeneration of the PE x SC-60 pineapple hybrid. Nodal segments of in vitro plants with approximately 5-7 cm height were incubated in basic MS culture medium supplemented with 0.0; 0.5 and 1.0 mg L-1 of naphthaleneacetic acid (NAA) in combination with gibberellic acid (GA3) in concentrations of 0.0; 0.5 and 1.0 mg L-1, and maintained at 27 ºC under dark condition. Evaluations were carried out at 90 and 180 days after incubation period. The best results for length of etiolated stems were obtained with 1.0 mg L-1 of NAA. In the experiment followed by the regeneration, stems with 3 cm from the etiolation treatment, were cultivated in proliferation medium and the number of regenerated plants per treatment was evaluated at 60 days of cultivation. The treatment that promoted the best etiolation of plants also promoted the worst regeneration rates, demonstrating the residual effect of the auxin used in the previous step in the regeneration of plants of the pineapple hybrid evaluated.
Resumo:
The purpose of this study was to evaluate the efficiency of integrated managements on white mold control on common bean. Initially, in vitro testing was made to assess the antagonism of 11 Trichoderma isolates against Sclerotinia sclerotiorum and to investigate fungicides (fluazinam and procymidone) inhibitory effects on those fungi. In two field experiments the following combinations were tested: irrigation frequencies (seven or 14 days), plant densities (six or 12 plants per meter), and three disease controls (untreated control, fungicide or Trichoderma spp.). In a third experiment plant densities were replaced by grass mulching treatments (with or without mulching). Fluazinam was applied at 45 and 55 days after emergence (DAE). The antagonists T. harzianum (experiments 1 and 3) and T. stromatica (experiment 2) were applied through sprinkler irrigation at 10 and 25 DAE, respectively. Most of the Trichoderma spp. were effective against the pathogen in vitro. Fluazinam was more toxic than procymidone to both the pathogen and the antagonist. Fungicide applications increased yield between 32 % and 41 %. In field one application of Trichoderma spp. did not reduce disease intensity and did not increase yield. The reduction from 12 to six plants per meter did not decrease yield, and disease severity diminished in one of the two experiments. It is concluded that of the strategies for white mold control just reduction of plant density and applications of fungicide were efficient.
Resumo:
This work objectified to evaluate the efficiency of two meter mechanism of corn seeds when submitted to different forward speed and soil management system during the non-tillage seeding. It was used a factorial design in randomized blocks. The factors whose effects were examined were related to the seeders with pneumatic and horizontal disk meter mechanisms for the distribution of the seeds, to the set tractor-seeder forward speeds (4.4; 8.0 and 9.8 km h-1), and to the soil management system considering the corn no-tillage seeding over minimum tillage with chisel plow and the no-tillage system for the seeding of oat culture (Avena strigosa Schreb). It was verified that the forward speed didn't influence the initial and final stands of plants but it interfered in the regularity of longitudinal distribution of plants. The smallest speed provided the largest percentile of normal spacing between plants. The pneumatic meter mechanism presented better performance than the horizontal disk perforated in the longitudinal distribution of plants. About corn productivity aspect it's indifferent the recommendation of use for pneumatic and perforated horizontal disk meter mechanism of seeds.
Resumo:
The effects of competition of seven weed species on the growth of coffee plants were evaluated under greenhouse conditions. Thirty days after coffee seedling transplantation into 12 L pots with soil level area of 6.5 dm², weeds were transplanted into or sown in those pots, at densities of 0, 1, 2, 3, 4 and 5 plants per pot. Competition or weedy periods from weed transplantation or emergence to plant harvesting, at weed pre-flowering stage, were: 77 days - Bidens pilosa, 98 days - Brachiaria decumbens, 180 days - Commelina diffusa, 82 days - Leonurus sibiricus, 68 days - Nicandra physaloides, 148 days - Richardia brasiliensis and 133 days - Sida rhombifolia. Coffee plant height, stem diameter, leaf number and shoot dry matter were determined. Effects of competition by N. physaloides and S. rhombifolia against coffee plants were among the lowest, since only a slight decrease in all the characteristics evaluated in coffee plants was observed. The other weed species caused severe decrease in growth, mainly with increasing weed plant densities. Competition degree was found to depend on weed species and density.
Resumo:
The aim of this study was to model light interception and distribution in the mixed canopy of Common cocklebur (Xanthium stramarium) with corn. An experiment was conducted in factorial arrangement on the basis of randomized complete blocks design with three replications in Gonabad in 2006-2007 and 2007-2008 seasons. The factors used in this experiment include corn density of 7.5, 8.5 and 9.5 plants per meter of row and density of Common cocklebur of zero, 2, 4, 6 and 8 plants per meter of row. INTERCOM model was used through replacing parabolic function with triangular function of leaf area density. Vertical distribution of the species' leaf area showed that corn has concentrated the most leaf area in layer of 80 to 100 cm while Common cocklebur has concentrated in 35-50 cm of canopy height. Model sensitivity analysis showed that leaf area index, species' height, height where maximum leaf area is seen (hm), and extinction coefficient have influence on light interception rate of any species. In both species, the distribution density of leaf area at the canopy length fit a triangular function, and the height in which maximum leaf area was observed was changed by change in density. There was a correlation between percentage of the radiation absorbed by the weed and percentage of corn seed yield loss (r² = 0.89). Ideal type of corn was determined until the stage of tasseling in competition with weed. This determination indicates that the corn needs more height and leaf area, as well as less extinction coefficient to successfully fight against the weed.
Resumo:
The research objective was to determine the effects of spacing and seeding density of common bean to the period prior to weed interference (PPI) and weed period prior to economic loss (WEEPPEL). The treatments consisted of periods of coexistence between culture and the weeds, with 0 to 10, 0 to 20, 0 to 30, 0 to 40, 0 to 50, 0 to 60, 0 to 70, and 0 to 80 days and a control maintained without weeds. In addition to the periods of coexistence, there were still studies with an inter-row of 0.45 and 0.60 m, 10 and 15 plants m-1. The experimental delineation used was randomized blocks with four repetitions per treatment. The grain productivity of the culture had a reduction of 63, 50, 42 and 57% when the coexistence with the weed plants was during the entire cycle of the culture for a row spacing of 0.45 m and a seeding density of 10 and 15 plants per meter; and a row spacing of 0.60m and a seeding density of 10 and 15 plants per meter, respectively. The PPI occurred in 23, 27, 13, and 19 days after crop emergence and WEEPPEL in 10, 9, 8, and 8 days, respectively.
Resumo:
La hipótesis de investigación es que con la reducción de la densidad de siembra y del espaciamiento entre líneas, el período anterior a la interferencia de las malezas será reducido en el cultivo de frijol. El objetivo de este trabajo fue determinar el período anterior a la interferencia de las malezas (PAI) en función del espaciamiento entre líneas y de su densidad poblacional. Los tratamientos fueron constituidos de ocho períodos de convivencia del cultivo con las malezas: 0-10, 0-20, 0-30, 0-40, 0-50, 0-60, 0-70 y 0-80 días después de la emergencia y un control libre de interferencia. Los períodos de convivencia fueron aplicados en dos experimentos, utilizando dos distancias entre líneas, de 0,45 y 0,60 m y en dos densidades de plantas por línea de siembra, de 10 y 15 plantas por metro. El delineamiento experimental utilizado fue en bloques completos al azar, con cuatro repeticiones. Hubo reducción de 16, 40, 36 y 58% en la productividad de granos del cultivo de frijol cuando convivió durante todo el ciclo del cultivo con las malezas, para el espaciamiento de 0,45 m en las densidades de 10 y 15 plantas m-1; y espaciamiento de 0,60 m y densidades de 10 y 15 plantas m-1, respectivamente. La productividad de granos pasó a ser afectada negativamente a partir de 28, 26, 22 y 14 días después de la emergencia, constituyéndose en los períodos anteriores a la interferencia del cultivo, respectivamente.
Resumo:
Objetivou-se com este trabalho determinar o período de convivência anterior à interferência das plantas daninhas (PAI) e o período anterior ao dano no rendimento econômico (PADRE) na cultura do feijão, em diferentes espaçamentos (0,45 e 0,60 m) e densidade de plantas (10 e 15 plantas m-1). Os tratamentos foram constituídos de períodos de convivência entre a cultura e as plantas daninhas (0 a 10, 0 a 20, 0 a 30, 0 a 40, 0 a 50, 0 a 60, 0 a 70 e 0 a 80 dias), mais uma testemunha sem convívio com as plantas daninhas. Adotou-se o delineamento experimental de blocos casualizados, com quatro repetições. Os períodos anteriores à interferência (PAI) da cultura foram de 23, 27, 13 e 19 dias após emergência, e os períodos anteriores ao dano no rendimento econômico (PADRE), de 10, 9, 8 e 8 dias, para os tratamentos com espaçamento de 0,45 m e densidades de semeadura de 10 e 15 plantas m-1 e para aqueles com espaçamento de 0,60 m e densidades de semeadura de 10 e 15 plantas m-1, respectivamente, o que reduziu a produtividade de grãos em 63, 50, 42 e 57%, respectivamente, com a presença das plantas daninhas durante todo o ciclo do feijoeiro.
Resumo:
A determinação das relações competitivas entre espécies de plantas requer delineamentos experimentais e métodos de análise apropriados. A hipótese da pesquisa foi que duas espécies crescendo em convivência têm comportamento de crescimento e desenvolvimento distintos em função da sua competitividade relativa. O objetivo desta pesquisa foi quantificar a competitividade relativa da cultura do trigo com o capim-marmelada através da medida dos efeitos da densidade e da proporção de plantas, usando experimentos em série substitutiva. Monoculturas foram cultivadas em densidades de 1, 3, 5, 10 e 15 plantas por caixa e analisadas por regressão dos dados de massa seca, em 2006. Experimento em mistura foi cultivado nas proporções trigo:capim-marmelada de 0:6, 1:5, 2:4, 3:3, 4:2, 5:1 e 6:0 plantas por caixa e analisado através de interpretação gráfica de características de crescimento e produção, em 2007. Ambos os experimentos foram realizados em delineamento completamente casualizado com quatro repetições. Capim-marmelada foi mais sensível que trigo à competição intraespecífica. Capim-marmelada foi levemente mais competitivo que trigo. Número e massa de espigas e número de afilhos foram as características do trigo mais afetadas pela interferência do capim-marmelada.