Flow-injection spectrophotometric determination of tetracycline and doxycycline in pharmaceutical formulations using chloramine-T as oxidizing agent

A flow-injection (FI) spectrophotometric procedure is proposed for tetracycline (TC) and doxycycline (DXC) determination in pharmaceuticals. The method is based on the reaction of oxidation of these drugs by chloramine-T in alkaline medium producing red color products (λmax = 535 and 525 nm). Beer´s law is obeyed in the concentration range from 6.62 x 10-5 to 7.72 x 10-4 mol L-1 and 5.37 x 10-5 to 7.16 x 10-4 mol L-1 for TC and DXC, respectively. The analytical frequency was 50 h"1 and 45 h-1 for TC and DXC, respectively. The results obtained by the proposed method were in good agreement with those obtained by the official method at 95% confidence level.

Sequential injection analysis system with spectrophotometric detection for determination of norfloxacin and ciprofloxacin in pharmaceutical formulations

This work proposes a sequential injection analysis (SIA) system for the spectrophotometric determination of norfloxacin (NOR) and ciprofloxacin (CIP) in pharmaceutical formulations. The methodology was based on the reaction of these drugs with p-(dimethylamino)cinnamaldehyde in micellar medium, producing orange colored products (λmax = 495 nm). Beer´s law was obeyed in the concentration range from 2.75x10-5 to 3.44x10-4 mol L-1 and 3.26x10-5 to 3.54x10-4 mol L-1 for NOR and CIP, respectively and sampling rate was 25 h-1. Commercial samples were analyzed and results obtained through the proposed method were in good agreement with those obtained using the reference procedure for a 95% confidence level.

Spectrophotometric and spectrofluorimetric determination of some drugs containing secondary amino group in bulk drug and dosage forms via derivatization with 7-Chloro-4-Nitrobenzofurazon

Sensitive and selective spectrophotometric and spectrofluorimetric methods have been developed for determination of some drugs such as Pramipexole, Nebivolol, Carvedilol, and Eletriptan, which commonly contain secondary amino group. The subject methods were developed via derivatization of the secondary amino groups with 7-Chloro-4-Nitrobenzofurazon in borate buffer where a yellow colored reaction product was obtained and measured spectrophotometrically or spectrofluorimetrically. Concentration ranges were found as 2.0 to 250 μg mL-1 and 0.1 to 3.0 μg mL-1, for spectrophotometric and spectrofluorimetric study, respectively. The described methods can be easily applied by the quality control laboratories in routine analyses of these drugs in pharmaceutical preparations.

Quantification of beta-lactam antibiotics in veterinary drugs: amoxicillin and ampicillin determination by high performance liquid chromatography

This work focused on the development and validation of an RP-HPLC-UV method for quantification of beta-lactam antibiotics in three pharmaceutical samples. Active principles analyzed were amoxicillin and ampicillin, in 3 veterinary drugs. Mobile phase comprised 5 mmol L-1 phosphoric acid solution at pH 2.00, acetonitrile with gradient elution mode and detection wavelength at 220 nm. The method was validated according to the Brazilian National Health Surveillance regulation, where linear range and linearity, selectivity, precision, accuracy and ruggedness were evaluated. Inter day precision and accuracy for pharmaceutical samples 1, 2 and 3 were: 1.43 and 1.43%; 4.71 and 3.74%; 2.72 and 1.72%, respectively, while regression coefficients for analytical curves exceeded 0.99. The method had acceptable merit figure values, indicating reliable quantification. Analyzed samples had active principle concentrations varying from -12 to +21% compared to manufacturer label claims, rendering the medicine unsafe for administration to animals.

Lipase-catalyzed Approaches towards Secondary Alcohols: Intermediates for Enantiopure Drugs

The use of enantiopure intermediates for drug synthesis is a trend in pharmaceutical industry. Different physiological effects are associated with the enantiomers of chiral molecules. Thus, the safety profile of a drug based on an enantiopure active pharmaceutical ingredient is more reliable. Biocatalysis is an important tool to access enantiopure molecules. In biocatalysis, the advantage of selectivity (chemo-, regio- and stereoselectivity) is combined with the benefits of a green synthesis strategy. Chemoenzymatic syntheses of drug molecules, obtained by combining biocatalysis with modern chemical synthesis steps usually consists of fewer reaction steps, reduced waste production and improved overall synthetic efficiency both in yields and enantio- and/or diastereoselectivities compared with classical chemical synthesis. The experimental work together with the literature review clearly indicates that lipase catalysis is highly applicable in the synthesis of enantiopure intermediates of drug molecules as the basis to infer the correct stereochemistry. By lipase catalysis, enantiopure secondary alcohols used as intermediates in the synthesis of Dorzolamide, an antiglaucoma drug, were obtained. Enantiopure _-hydroxy nitriles as potential intermediates for the synthesis of antidepressant drugs with 1-aryl-3- methylaminopropan-1-ol structure were also obtained with lipases. Kinetic resolution of racemates was the main biocatalytic approach applied. Candida Antarctica lipase B, Burkholderia cepacia lipase and Thermomyces lanuginosus lipase were applied for the acylation of alcohols and the alcoholysis of their esters in organic solvents, such as in diisopropyl ether and tert-butyl methyl ether. Candida Antarctica lipase B was used under solvent free conditions for the acylation of ethyl 3-hydroxybutanoate.

A simple spectrophotometric method for the determination of tetracycline and doxycycline in pharmaceutical formulations using chloramine-T

A simple, rapid, accurate and inexpensive spectrophotometric method for the determination of tetracycline and doxycycline has been developed. The method is based on the reaction between these drugs and chloramine-T in alkaline medium producing red color products with absorbance maximum at the Λ = 535 and 525 nm for the tetracycline and doxycycline, respectively. The best conditions for the reactions have been found using multivariate method. Beer´s law is obeyed in a concentration ranges 1.03 x 10-5 to 3.61 x 10-4 mol L-1 and 1.75 x 10-5 to 3.48 x 10-4 mol L-1 for the tetracycline and doxycycline, respectively. The quantification limits were 5.63 x 10-6 mol L-1 and 7.12 x 10-7 mol L-1 for the tetracycline and doxycycline, respectively. The proposed method was successfully applied to the determination of these drugs in pharmaceutical formulations and the results obtained were in good agreement with those obtained by the comparative method at the 95% confidence level.

Strategic outsourcing of R&D: The location-specific advantages of India to the pharmaceutical industry

Companies are increasingly under pressure to be more efficient both in terms of costs and overall performance and thus, they seek new ways to develop their products and innovate. For pharmaceutical industry it can take several decades to launch a new drug to the markets. Since pharmaceutical industry is one of the most research-intensive industries, is outsourcing one way to enhance the R&D processes of such companies. It is said that outsourcing to offshore locations is vastly more challenging and complicated than any other exporting activity or inter-company relationship that has evoked a lot of discussion. By outsourcing strategically, companies must also thoroughly focus on transaction costs and core competences. Today, the suppliers are looked for beyond national boundaries and furthermore, the location of the outsourcing activity must also be thoroughly considered. Consequently, the purpose of this study is to analyze what is known of strategic outsourcing of pharmaceutical R&D to India. In order to meet the purpose of the study, this study tries to answer three sub-questions set to it: first, what is strategic outsourcing, second, why pharmaceutical companies utilize strategic outsourcing of R&D and last, why pharmaceutical companies select India as the location for outsourcing their R&D. The study is a qualitative study. The purpose of the study was approached by a literature review with systematic elements and sub-questions were analyzed through different relevant theories, such as theory of transaction costs, core competences and location advantages. Applicable academic journal articles were comprehensively included in the study. The data was collected from electronic journal article databases using key words and almost only peer-reviewed, as new as possible articles were included. Also both the reference list of the included articles and article recommendations from professionals generated more articles for inclusion. The data was analyzed through thematization that resulted in themes that illuminate the purpose of the study and sub-questions. As an outcome of the analysis, each of the theory chapters in the study represents one sub-question. The literature used in this study revealed that strategic outsourcing of R&D is increasingly used in pharmaceutical industry and the major motives to practice it has to do with lowering costs, accessing skilled labor, resources and knowledge and enhancing their quality while speeding up the introduction of new drugs. Mainly for the above-mentioned motives India is frequently chosen as the target location for pharma outsourcers. Still, the literature is somewhat incomplete in this complex phenomenon and more research is needed.

Functional cellulose microspheres for pharmaceutical applications

Dissolving cellulose is the first main step in preparing novel cellulosicmaterials. Since cellulosic fibres cannot be easily dissolved in water-based solvents, fibres were pretreated with ethanol-acid solution prior to the dissolution. Solubility and changes on the surface of the fibres were studied with microscopy and capillary viscometry. After the treatment, the cellulose fibres were soluble in alkaline urea-water solvent. The nature of this viscous solution was studied rheologically. Cellulose microspheres were prepared by extruding the alkaline cellulose solution through the needle into an acidic medium. By altering the temperature and acidity of the mediumit was possible to adjust the specific surface area and pore sizes of themicrospheres. A typical skin-core structure was found in all samples. Microspheres were oxidised in order to introduce anionic carboxylic acid groups (AGs). Anionic microspheres are more hydrophilic; their water-uptake increased 25 times after oxidation and they could swell almost to their original state (88%) after drying and shrinking. Swelling was studied in simulated physiological environments, corresponding to stomach acid and intestines (pH 1.2-7.4). Oxidised microspheres were used as a drug carriers. They demonstrated a highmass uniformity, which would enable their use for personalised dosing among different patients, including children. The drug was solidified in microspheres in amorphous form. This enhanced solubility and could be used for more challenging drugs with poor solubility. The pores of themicrospheres also remained open after the drug was loaded and they were dried. Regardless of the swelling, the drug was released at a constant rate in all environments.

Who has responsibility for access to essential medical drugs in the developing world?

L’accès aux traitements de base est un enjeu crucial pour la santé, la pauvreté et le développement. La responsabilité en matière d’accès est alors une question essentielle. Le huitième Objectif du Millénaire pour le Développement postule qu’en coopération avec les firmes pharmaceutiques, l’accès aux traitements essentiels doit être assuré. Les principales parties prenantes qui doivent engager leur responsabilité pour l’accès aux médicaments sont (1) l’industrie pharmaceutique, (2) les gouvernements, (3) la société au sens large, et (4) les individus (qu’ils soient ou non malades). Quatre approches permettent d’appréhender la responsabilité: (a) l’approche déontologique; (b) l’utilitarisme; (c) l’égalitarisme; (b) l’approche basée sur les droits de l’homme. Ces quatre arguments peuvent être utilisés pour assigner une responsabilité aux gouvernements dans l’accès aux médicaments. Le papier conclut qu’il est parfois difficile de distinguer entre ces quatre approches et qu’un « glissement-d’échelle » de la responsabilité est une voie utile pour appréhender les rôles des quatre principales parties prenantes dans l’accès aux médicaments, dépendant du pays ou de la région et de son environnement interne.

Use of anti-infective drugs during pregnancy : prevalence, predictors of use and the risk of preterm birth and small-for-gestational-age newborns

Résumé: Les anti-infectieux sont parmi les médicaments les plus utilisés pendant la grossesse. Les indications pour l’utilisation de ces médicaments, telles que les infections bactériennes, figurent parmi les facteurs de risque les plus importants pour la prématurité et les enfants nés petits pour l'âge gestationnel («Small-for-gestational-age », SGA). Ces complications de la grossesse peuvent avoir des incidences sur la santé du nouveau né et sur son développement futur. Compte tenu des impacts sur la santé de la mère et de l’enfant, la prise en charge et le traitement efficace de ces infections sont impératifs. Cependant, l'utilisation des anti-infectieux, pour éviter des issues de grossesse défavorables, fait l’objet d’une controverse dans la littérature. Cette controverse est en partie liée à la qualité méthodologique discutable des études disponibles sur le sujet. Les quatre études présentées dans cette thèse ont donc pour objectif d’investiguer l’utilisation des anti-infectieux durant la grossesse ainsi que d’évaluer le risque de prématurité et de SGA après utilisation de ces médicaments en période gestationnelle. Une révision systématique de la littérature sur l’utilisation du métronidazole durant la grossesse est également présentée. Nous avons utilisé, comme source de données le Registre des Grossesses du Québec, une cohorte longitudinale conçue à partir du jumelage de trois bases de données administratives de la province du Québec (RAMQ, Med-Echo et ISQ). Le registre fournit des informations sur les prescriptions, les services pharmaceutiques et médicaux, ainsi que des donnés sur les soins d’hospitalisation de courte durée et démographiques. Les deux premières études présentées dans cette thèse ont eu pour objectif d’évaluer la prévalence, les tendances, les indications et les prédicteurs de l’utilisation des anti-infectieux dans une cohorte, extraite du registre, de 97 680 femmes enceintes. A l’aide d’un devis cas-témoins, les 2 dernières études ont mesuré l’association entre l’utilisation d’anti-infectieux durant les 2 derniers trimestres de grossesse et le risque de prématurité et de SGA, respectivement. Un cas de prématurité a été défini comme un accouchement survenu avant 37 semaines de gestation. Un cas de SGA a été défini comme l’accouchement d’un enfant dont le poids à la naissance se situe sous le 10ème percentile du poids normalisé à la naissance (compte tenu de l’âge gestationnel et du sexe du bébé). Les données ont été recueillies pour les agents systémiques oraux, ainsi que pour les classes et les agents individuels. Nos résultats ont montré que la prévalence de l’utilisation des anti-infectieux durant la grossesse était comparable à celle d’autres études déjà publiées (25%). Nous avons observé une augmentation de l’utilisation des agents plus anciens et ayant des profils d’innocuité connus. Les prédicteurs de l’usage en début de grossesse identifiés sont : avoir eu plus de deux différentes prescriptions (OR ajusté = 3,83, IC 95% : 3,3-4,3), avoir eu un diagnostic d’infection urinaire (OR= 1,50, IC 95% : 1,3-1,8) et un diagnostic d’infection respiratoire (OR= 1,40, IC 95% : 1,2-1,6). L’utilisation des macrolides a été associée à une diminution du risque de prématurité (OR =0,65, IC 95% : 0,50-0,85). En revanche, les femmes ayant été exposées au métronidazole ont vu leur risque augmenté de 80% (OR=1,81, IC 95% : 1,30-2,54). L’utilisation d’azithromycine a été associée à une diminution importante du risque chez les femmes ayant un diagnostic de rupture prématurée des membranes (OR=0,31, IC 95% : 0,10-0,93). Cependant, l'utilisation de sulfaméthoxazole-triméthoprime (SXT) a été significativement associée à une augmentation du risque de SGA (OR= 1,61, IC 95% : 1,16-2,23), tandis que celle des anti-infectieux urinaires a été associée à une diminution du risque (OR= 0,80, 95%CI : 0.65-0.97). Les conclusions de nos travaux suggèrent que l’utilisation des macrolides et des pénicillines diminuent le risque de prématurité et de SGA. Nous devons considérer l'utilisation de différents choix thérapeutiques tels que l’azithromycine, lors de la prise en charge des infections pouvant induire la prématurité et le SGA.

New grafted PLA-g-PEG polymeric nanoparticles used to improve bioavailability of oral drugs.

Les nanoparticules (NPs) de polymère ont montré des résultats prometteurs pour leur utilisation comme système de transport de médicaments pour une libération contrôlée du médicament, ainsi que pour du ciblage. La biodisponibilité des médicaments administrés oralement pourrait être limitée par un processus de sécrétion intestinale, qui pourrait par la suite être concilié par la glycoprotéine P (P-gp). La dispersion de la Famotidine (modèle de médicament) à l’intérieur des nanoparticules (NPs) pegylées a été évaluée afin d’augmenter la biodisponibilité avec du polyéthylène glycol (PEG), qui est connu comme un inhibiteur de P-gp. L’hypothèse de cette étude est que l’encapsulation de la Famotidine (un substrat de P-gp) à l’intérieur des NPs préparées à partir de PEG-g-PLA pourrait inhiber la fonction P-gp. La première partie de cette étude avait pour but de synthétiser quatre copolymères de PEG greffés sur un acide polylactide (PLA) et sur un squelette de polymère (PLA-g-PEG), avec des ratios de 1% et 5% (ratio molaire de PEG vs acide lactique monomère) de soit 750, soit 2000 Da de masse moléculaire. Ces polymères ont été employés afin de préparer des NPs chargés de Famotidine qui possède une faible perméabilité et une solubilité aqueuse relativement basse. Les NPs préparées ont été analysées pour leur principaux paramètres physicochimiques tels que la taille et la distribution de la taille, la charge de surface (Potentiel Zeta), la morphologie, l’efficacité d’encapsulation, le pourcentage résiduel en alcool polyvinylique (PVA) adsorbé à la surface des NPs, les propriétés thermiques, la structure cristalline et la libération du médicament. De même, les formules de NPs ont été testées in vitro sur des cellules CaCo-2 afin dʼévaluer la perméabilité bidirectionnelle de la Famotidine. Généralement, les NPs préparées à partir de polymères greffés PLA-g-5%PEG ont montré une augmentation de la perméabilité du médicament, ce par l’inhibition de l’efflux de P-gp de la Famotidine dans le modèle CaCo-2 in vitro. Les résultats ont montré une baisse significative de la sécrétion de la Famotidine de la membrane basolatéral à apical lorsque la Famotidine était encapsulée dans des NPs préparées à partir de greffes de 5% PEG de 750 ou 2000 Da, de même que pour d’autres combinaisons de mélanges physiques contenant du PEG5%. La deuxième partie de cette étude est à propos de ces NPs chargées qui démontrent des résultats prometteurs en termes de perméabilité et d’inhibition d’efflux de P-gp, et qui ont été choises pour développer une forme orale solide. La granulation sèche a été employée pour densifier les NPs, afin de développer des comprimés des deux formules sélectionnées de NPs. Les comprimés à base de NPs ont démontré un temps de désintégration rapide (moins d’une minute) et une libération similaire à la Famotidine trouvée sur le marché. Les résultats de l’étude du transport de comprimés à base de NPs étaient cohérents avec les résultats des formules de NPs en termes d’inhibition de P-gp, ce qui explique pourquoi le processus de fabrication du comprimé n’a pas eu d’effet sur les NPs. Mis ensemble, ces résultats montrent que l’encapsulation dans une NP de polymère pegylé pourrait être une stratégie prometteuse pour l’amélioration de la biodisponibilité des substrats de P-gp.

Fabrication of Electrochemical Sensors for Pharmaceutical Analysis

Potentiometric chemical sensors,an important class of electro-chemical sensors are widely used in pharmaceutical analysis because of its inherent advantages.The present study was aimed at fabrication of potentiometric sensors for the drugs mebendazole,pefloxacin,ambroxol,sildenafil citrate,dextro-methorphan and tetracycline.A total of 18 sensors have been developed for the determination of theses drugs.The major step in the fabrication of the sensor was the preparation of the ion association.Two types of sensors viz:PVC membrane sensor and carbon paste electode (CPE) were fabricated.The response characteristics of the different sensors fabricated were studied.Various response parameters studied include response time,selectivity and the effect of pH.The developed sensors were also employed for the determination of the drugs in pharmaceutical formulations and also for the recovery of the drug from urine samples.The selectivity studies reveal that the developed sensors are highly selective to the drug even in prescence of foreign ions.

Legal Protection for Consumer of Pharmaceutical Products

The overall focus of the thesis involves the legal protection for consumers of pharmaceutical products.The work on “Legal Protection for Consumers of Pharmaceutical Products” is undertaken to study the legal framework that is existing for this purpose and the functioning of regulating mechanism that is envisaged under it. The purpose of the study is to analyse how far these measures are effective in adequately protecting various aspects of consumer interest. Methodology adopted for the study is analytical.The present study revealed that the theory of freedom of contract is only an ideal relevant when the parties are assumed to be on equal footing.In a more complicated social and economic society, it ceased to have any relevance. Many countries in the world enacted legislations to protect the consumers of pharmaceutical products.The meaning of ‘consumers of drugs’ provided in the law is inclusive and not exhaustive one. The definition of ‘drug’ as interpreted by the courts is comprehensive enough to take in it not only medicines but also substances. The meaning of the word substances has been widened by the interpretation of the courts so as to include all the things used in treatment.The definition of the word ‘consumer’ has been liberally interpreted by the courts so as to provide protective net to a large section of the public.The studies subsequent to this report also revealed that there is a shortage of essential drugs necessary to cure local diseases like tuberculosis and malaria where as drugs containing vitamins and other combinations which are more profitable for the manufacturers are produced and marketed in abundance.The study of the provisions in this regard revealed that the duty of the drug controlling authorities is confined to scrutinize the data of the clinical test already conducted by the sponsor of the drug.Study of the clinical trial procedure under the U.S. law revealed that there is a continuous supervision over clinical trials and controls are provided on the treatment use of an investigational productStudy of the clinical trial procedure under the U.S. law revealed that there is a continuous supervision over clinical trials and controls are provided on the treatment use of an investigational product.the study of the provisions of the Drugs and Cosmetics Act and the rules framed under it revealed that the law in this regard is comprehensive to protect the consumer provided it is sufficiently supported by adequately equipped enforcement machinery.

Pharmaceutical consumption and residuals potentially relevant to nutrient cycling in Greater Accra, Ghana

Recycling nutrients form sanitary wastes back into agricultural ecosystems offers an option to alleviate soil depletion in regions where the use of mineral fertiliser is limited. Exemplary nutrient and water cycling approaches, including collection, treatment and use of human urine, are established at Valley View University (VVU) in Greater Accra, Ghana. Concerns have been recently raised in regard to fate and impact of pharmaceutical residues in soils and interlinked environment. To evaluate in how far emerging knowledge can be transposed onto VVU, urban and rural environments in Greater Accra, spatial disease occurrence and drug consumption patterns were studied. Malaria has been found to represent the most severe health burden in Ghana, but there is also a high prevalence of infectious diseases. Drugs consumed in great quantities and in respect to their residual loads potentially problematic in the environment belong to therapeutic groups of: antibiotics, analgesics, drugs for diabetes, antimalarials, cardiovascular drugs and anthelmintics. Drug consumption revealed to be highest in urban and lowest in rural areas. At VVU the range of consumed drugs is comparable to urban areas except for the negligible use of diabetes and cardiovascular medication as well as contraceptives.

Fitting models for the joint action of two drugs using SAS(R)

Combinations of drugs are increasingly being used for a wide variety of diseases and conditions. A pre-clinical study may allow the investigation of the response at a large number of dose combinations. In determining the response to a drug combination, interest may lie in seeking evidence of synergism, in which the joint action is greater than the actions of the individual drugs, or of antagonism, in which it is less. Two well-known response surface models representing no interaction are Loewe additivity and Bliss independence, and Loewe or Bliss synergism or antagonism is defined relative to these. We illustrate an approach to fitting these models for the case in which the marginal single drug dose-response relationships are represented by four-parameter logistic curves with common upper and lower limits, and where the response variable is normally distributed with a common variance about the dose-response curve. When the dose-response curves are not parallel, the relative potency of the two drugs varies according to the magnitude of the desired effect and the models for Loewe additivity and synergism/antagonism cannot be explicitly expressed. We present an iterative approach to fitting these models without the assumption of parallel dose-response curves. A goodness-of-fit test based on residuals is also described. Implementation using the SAS NLIN procedure is illustrated using data from a pre-clinical study. Copyright © 2007 John Wiley & Sons, Ltd.