裂缝型储层检测方法——P波方位各向异性技术

Nowadays, the exploration of fractured reservoir plays a vital role in the further development of petroleum industry through out the world. Fractured hydrocarbon reservoirs are widely distributed in China. Usually, S-wave technique prevails, but it also has its disadvantage, prohibitive expense in S-wave data acquisition and processing. So directly utilizing P-wave data to detect fractures, comes to our mind. We briefly introduce theoretical model (HTI) for fractured reservoir. Then study Ruger’s reflectivity method to recognize reflection P-wave reflection coefficient of the top and bottom interface of HTI layer respectively, and its azimuth anisotropy character. Base on that study, we gives a review and comparison of two seismic exploration technologies for fractures available in the industry-- P-wave AVO and AVA. They has shown great potential for application to the oil and gas prediction of fractured reservoir and the reservoir fine description．Every technique has its disadvantage, AVO limited to small reflection angle; and AVA just offering relatively results. So that, We can draw a conclusion that a better way to any particular field is using synthesis of multiple data sources including core、outcrop、well-test、image logs、3D VSPs, generally to improve the accuracy.

复杂碎屑岩储层动、静态参数计算理论与方法研究

Reservoir characterization and reservoir modeling are two key techniques in petroleum exploration and development. They all are based on the reliable static and dynamic properties of the reservoirs, especially the static and dynamic properties of the reservoirs at each borehole. Without the static and dynamic properties of the reservoir, reservoir characterization and reservoir modeling will pass into nothingness. In fact, the static and dynamic properties of the reservoir are needed in every domain and stage of petroleum exploration & development Today, petroleum industry has reached a stage worldwide that most of the simple & large massive reservoirs have been well explored and developed. As a result, oil companies are paying more and more attention to the exploration & development of the complex & middle to small clastic reservoirs (such as low resistivity sandstone reservoirs, low or no resistivity contrast sandstone reservoirs, conglomerate reservoirs, volcanoclastic reservoirs). In the recent years, oil companies inside and outside China are focusing on the exploration and development elastic reservoirs. Most of the theories & methods being applicable for simple clastic reservoirs can not be used in complex clasic reservoirs. Some theories & methods that are not resolved in the case of simple clasic reservoirs become more impossible to be resolved in the case of complex elastic reservoirs. A set of theories & methods being applicable for computing the static and dynamic properties of the complex elastic reservoirs are developed in this paper and they have been put into practice successfully. These theories & methods are developed by integrating multi-subjects such as geology, well logging and reservoir engineering, in which geology is used as direction and modern well logging technology is used as basis and reservoir engineering is used as assistance and computer technology is used as tool. There are three outstanding breakthroughs in this paper: of the low porosity fractured and/or vuggy carbonate/igneous reservoirs too. A set of practical theories and methods of computing the static properties (such as porosity, saturation, lithology and fluid type) & dynamic properties (such as permeability and production rate) of simple clastic reservoirs have been developed with the hard efforts of many petroleum engineers and scientists in the past 70 years. However, only some of the theories & methods being applicable for simple clastic reservoirs can be used in complex clastic reservoirs after little modification because of the complexity of the complex clastic reservoirs. Most of the theories & methods being applicable for simple clastic reservoirs can not be used in complex clasic reservoirs. Some theories & methods that are not resolved in the case of simple clasic reservoirs become more impossible to be resolved in the case of complex clastic reservoirs. A set of theories & methods being applicable for computing the static and dynamic properties of the complex clastic reservoirs are developed in this paper and they have been put into practice successfully. These theories & methods are developed by integrating multi-subjects such as geology, well logging and reservoir engineering, in which geology is used as direction and modern well logging technology is used as basis and reservoir engineering is used as assistance and computer technology is used as tool. There are three outstanding breakthroughs in this paper:

三角洲储层孔隙结构模型与剩余油分布研究——以临南油田沙河街组储层为例

The study of pore structure in reservoir was paid attention to in the early reservoir research and now a systematic research methodology is set up. On the limits of tools and conditions, methodologies and technologies on formation condition and distribution laws of pore structure and the relationship between remaining oil distribution and pore structure are uncertain and some knownage about it is also uncertain. As the development of petroleum industry, the characterization of pore structure and the prediction of remaining oil are the hot spot and difficult point in the research of oil development. The author pays a close attention to this subject and has done much research on it. In a case study in Linnan oilfield Huimin sag Jiyang Depression Bohai Bay basin by using a new method, named varied scale comprehensive modeling of pore structure, the author builds pore structure models for delta reservoir, reveals the remaining oil distribution laws in delta facies, and predicts the distribution of remaining oil in Linnan oilfield. By the application of stratigraphy, sedimentology and structure geology. the author reveals the genetic types of sandbody and its distribution laws, builds the reservoir geological models for delta sandstone reservoir in Shahejie group in Linnan oilfield and points out the geological Factors that control the development of pores and throats. Combining petrology and the reservoir sensitive analysis, the author builds the rock matrix models. It is the first time to state that rocks in different sentimental micro facies have different sensitive .response to fluid pressed into the rocks. Normally. the reservoirs in the delta front have weaker sensitivity to fluid than the reservoirs in delta plain, In same subfacies, the microfacies that have fine grain, such as bank and crevasse splay, have stronger reservoir sensitivity than the microfacies that have coarse grains, such as under-water branched channel and debauch bar. By the application of advanced testing, such as imagine analysis, scan electronic microscope, and morphology method, the author classifies the pore structure and set up the distribution models of pore, throat and pore structure. By the application of advanced theory in well-logging geology, the author finds the relationship between microscope pore structure and macroscopic percolation characteristics, and then builds the well-logging interpretation formulae for calculating pore structure parameters. By using the geostatistics methods, the author reveals the spatial correlative characteristics of pore structure. By application of conditional stochastic simulation methods, the author builds the 3D models of pore structure in delta reservoir. It is the base of predicting remaining oil distribution. By a great deal of experiments and theoretical deduction, The author expounds the laws of percolation flow in different pore structures, and the laws by which the pore structure controls the micro distribution of remaining oil, and then, states the micro mechanism of remaining oil distribution. There are two types of remaining oil. They are by-pass flow caused by micro-fingering and truncation caused by non-piston movement. By new method, the author states the different pore structure has different replacement efficiency, reveals the formation condition and distribution laws of remaining oil. predicts the remaining oil distribution in Linnan oil field, and put forward some idea about how to adjust the oil production. The study yielded good results in the production in Linnan oilfield.

岩石热开裂的实验研究

Micro-cracks appeared between the boundaries of different minerals of rocks during heating process, because of different thermal expansion coefficients of minerals, this phenomenon is referred as thermal cracking of rocks. The transport property of rocks was changed greatly due to the thermal cracking induced micro-cracks network, for example, the permeability of carbonate increases about 10 times when the temperature arise from room temperature to 110～120℃. Thermal cracking of rocks is a new research field of rock physics, which related closely to rock mechanics, mineralogy as well as experimental technology. The thermal cracking experiments of various rocks were performed, the rock macroscopic properties such as porosity, permeability, velocities of elastic waves in rocks were obtained as a function of temperature of heating process, and the microscopic structures of rocks were observed by using Scanning Electro-Microscope (SEM). The mechanism and the theoretical model of thermal cracking of rocks are given at present paper. Finally, the potential implication of rock thermal cracking to petroleum industry is discussed.

The Limitations of Law in promoting synergy between environment and development policies in developing countries

Journal of Energy and Natural Resources Law, 24(4) pp.574-606 RAE2008

Policy-induced technology adoption: Evidence from the U.S. lead phasedown

Theory suggests that economic instruments, such as pollution taxes or tradable permits, can provide more efficient technology adoption incentives than conventional regulatory standards. We explore this issue for an important industry undergoing dramatic decreases in allowed pollution - the U.S. petroleum industry's phasedown of lead in gasoline. Using a duration model applied to a panel of refineries from 1971-1995, we find that the pattern of technology adoption is consistent with an economic response to market incentives, plant characteristics, and alternative policies. Importantly, evidence suggests that the tradable permit system used during the phasedown provided incentives for more efficient technology adoption decisions.

Biomonitoring of air pollutants by using lichens (Evernia prunastri) in areas between Kenitra and Mohammedia cities in Morocco.

In this study, Evernia prunastri, a lichen growing in its natural habitat in Morocco was analysed for the concentration of five heavy metals (Fe, Pb, Zn, Cu and Cr) from eleven sites between Kenitra and Mohammedia cities. The control site was Dar Essalam, an isolated area with low traffic density and dense vegetation. In the investigated areas, the concentration of heavy metals was correlated with vehicular traffic, industrial activity and urbanization. The total metal concentration was highest in Sidi Yahya, followed by Mohammedia and Bouznika. The coefficient of variation was higher for Pb and lower for Cu, Zn and Fe. The concentrations of most heavy metals in the thalli differed significantly between sites (p<0.01). Principal component analysis (PCA) revealed a significant correlation between heavy metal accumulation and atmospheric purity index. This study demonstrated also that the factors most strongly affecting the lichen flora were traffic density, the petroleum industry and paper factories in these areas. Overall, these results suggest that the index of atmospheric purity and assessment of heavy metals in lichen thalli are good indicators of the air quality at the studied sites.

Studies on new processing aids and other compounding ingredients in special purpose rubbers

In the first part of the study we probed the effectiveness of rice bran oil as a multipurpose compounding ingredient for nitrile (NBR) and chloroprene (CR) rubbers. This oil has already been successfully employed in the compounding of NR and SBR in this laboratory.In this context we thought it worthwhile to try this oil in the polar rubbers viz, NBR and CR also. The principle of like dissolves like as applicable to solvents is equally applicable while selecting a plasticiser, elastomer combination. Because of the compatibility considerations polar plasticisers are preferred for polar rubbers like NBR and CR. Although plasticisation is a physical phenomenon and no chemical reaction is involved, the chemical structure of plasticisers determines how much physical attraction there is between the rubber and the plasticiser. In this context it is interesting to note that the various fatty acids present in rice bran oil have a long paraffinic chain, characteristic of waxes, with an acid group at the end of the molecule. The paraffinic end of the molecule contributes lubricating effects and limits compatibility whereas the acid end group contributes some polarity and is also chemically reactive. Because of absorption of acid group on the surface of pigments, these acids will have active pigment wetting characteristics also. These factors justifies the role of rice bran oil as a co-activator and lubricating agent for NBR and CR. In fact in our study we successfully replaced stearic acid as co-activator and aromatic oillDOP as processing aid for CR and NBR with rice bran oil.This part of the study has got special significance in the fact that rubber industry now heavily depends on petroleum industry for process oils. The conventional process oils like aromatic, naphthenic and paraffinic oils are increasingly becoming costlier, as its resources in nature are fast depleting. Moreover aromatic process oils are reported to be carcinogenic because of the presence of higher levels of polycyclic aromatic compounds in these oils.As a result of these factors, a great amount research is going on world over for newer processing aids which are cost effective, nontoxic and performanance wise at par with the conventional ones used in the rubber industry. Trials with vegetable oils in this direction is worth trying.Antioxidants are usually added to the rubber compound to minimise ageing effects from heat, light, oxygen etc. As rice bran oil contains significant amount of tocopherols and oryzanol which are natural antioxidants, we replaced a phenolic antioxidant like styrenated phenol (SP) from the compound recipe of both the rubbers with RBO and ascertained whether this oil could function in the role of antioxidant as well.Preparation and use of epoxidised rice bran oil as plasticiser has already been reported.The crude rice bran oil having an iodine value of 92 was epoxidised in this laboratory using peracetic acid in presence of sulphuric acid as catalyst. The epoxy content of the epoxidised oil was determined volumetrically by treating a known weight of the oil with excess HCI and back titrating the residual HCI with standard alkali solution. The epoxidised oil having an epoxy content of 3.4% was tried in the compounding of NBR and CR as processing aids. And results of these investigations are also included in this chapter. In the second part of the study we tried how RBO/ERBO could perform when used as a processing aid in place of aromatic oil in the compounding of black filled NRCR blends. Elastomers cannot have all the properties required for a particular applications, so it is common practice in rubber industry to blend two elastomers to have desired property for the resulting blend.In this RBO/ERBO was tried as a processing aid for plasticisation, dispersion of fillers, and vulcanisation of black filled NR-CR blends.Aromatic oil was used as a control. The results of our study indicate that these oils could function as a processing aid and when added together with carbon black function as a cure accelerator also.PVC is compatible with nitrile rubber in all proportions, provided NBR has an acrylonitrile content of 25 to 40%. Lower or higher ACN content in NBR makes it incompatible with PVC.PVC is usually blended with NBR at high temperatures. In order to reduce torque during mixing, additional amounts of plasticisers like DOP are added. The plasticiser should be compatible both with PVC and NBR so as to get a homogeneous blend. Epoxidised soyaben oil is reported to have been used in the compounding of PVC as it can perfonn both as an efficient plasticiser and heat stabilizer.At present DOP constitute the largest consumed plasticiser in the PVC compounding. The migration of this plasticiser from food packaging materials made of PVC poses great health hazards as this is harmful to human body. In such a scenario we also thought it worthwhile to see whether DOP could be replaced by rice bran oil in the compounding of NBR-PVC blends Different blends of NBR-PVC were prepared with RBO and were vulcanized using sulphur and conventional accelerators. The various physical and mechanical properties of the vulcanisates were evaluated and compared with those prepared with DOP as the control plasticiser. Epoxidised rice bran oil was also tried as plasticiser for the preparation of NBR-PVC blends. A comparison of the processability and cure characteristics of the different blends prepared with DOP and ERBO showed that ERBO based blends have better processability and lower cure time values. However the elastographic maximum torque values are higher for the DOP based blends. Almost all of the physical properties evaluated are found to be slightly better for the DOP based blends over the ERBO based ones. However a notable feature of the ERBO based blends is the better percentage retention of elongation at break values after ageing over the DOP based blends. The results of these studies using rice bran oil and its epoxidised variety indicated that they could be used as efficient plasticisers in place of DOP and justifies their role as novel, nontoxic, and cheap plasticisers for NBR-PVC blends.

Caracterización del ausentismo por incapacidad médica en los trabajadores administrativos de una empresa de salud

Se realizó un estudio descriptivo de corte transversal a partir de la base de datos de ausentismo por incapacidad médica del área administrativa de una empresa de salud con sede en Bogotá durante el primer semestre de 2014 Objetivo: Caracterizar las principales causas de ausentismo laboral en los funcionarios administrativos de una empresa de salud desde la revisión de una base de datos para plantear recomendaciones de prevención. Métodos: Mediante un estudio descriptivo de corte transversal se analizó a un grupo de 284 trabajadores administrativos de una empresa de salud que reportaron ausentismo por incapacidad médica en el primer semestre de 2014. Resultados: Las principales causas de ausentismo laboral en el personal administrativo para el primer periodo de 2014 fueron por enfermedad general la diarrea y gastroenteritis (22,2%) y la rinofaringitis aguda (4,4%), y por enfermedad laboral los trastornos osteomusculares (1,04%). El 72% (207) de las incapacidades se generaron en trabajadores administrativos del género femenino y el 46.3% (133) en el grupo etáreo comprendido entre los 31-40 años; según la antigüedad laboral las personas que tienen entre 1 y 10 años generaron el 59.2% de los eventos. Conclusión: Las incapacidades en la población de estudio están dadas en mayor porcentaje por incapacidad general, por enfermedades infectocontagiosas y osteomusculares. Teniendo en cuenta que el presente estudio es netamente descriptivo, puede servir como punto de partida para futuros estudios en los que pueda medirse relación causal entre tipo de incapacidad, duración, género, cargo y grupo etáreo.

Estrés laboral y su relación con los turnos y áreas de trabajo en el personal que labora en campos de perforación de una empresa del sector hidrocarburos en Colombia

El personal que labora en áreas de campo en las empresas de hidrocarburos se enfrenta de manera sistemática a diferentes exposiciones ocupacionales que pueden estar relacionadas con el estrés laboral o tener algún tipo de incidencia en este sentido. Objetivo: establecer la prevalencia de síntomas de estrés percibidos por un grupo de trabajadores que laboran en cuatro campos de perforación de hidrocarburos e identificar su relación con el turno y área de trabajo (administración y producción) en que desempeñan su labor. Metodología: Estudio de corte transversal, en una empresa del sector hidrocarburos que opera en el municipio de Puerto Boyacá, con una muestra de 115 trabajadores, la información se recolectó a través de la aplicación del cuestionario para la evaluación del estrés – Tercera versión del Ministerio de Salud y Protección Social de la República de Colombia y la Pontificia Universidad Javeriana de Bogotá. Resultados: El género de mayor frecuencia fue el masculino con el 86%, el 39% de los trabajadores se encuentra en el grupo etario entre los 47-57 años refirió un nivel de estrés alto. Se observó que la línea operativa y profesional y los analistas, fueron los que reportaron un nivel de estrés alto. Conclusiones: El trabajo que desarrolla el personal que labora por turnos en campos de perforación, es un generador de estrés por lo que debe ser monitoreado de forma periódica, haciendo énfasis en la promoción de estilos laborales saludables y la prevención de diagnósticos que afecten el componente conductual.

Caracterización del ausentismo laboral de una IPS que presta servicios de consulta externa de medicina general, 2014

RESUMEN El ausentismo laboral genera un gran impacto económico en las empresas y a la sociedad en general. Es un problema difícil de manejar ya que es multifactorial, porque a pesar de que en su gran mayoría es generado por enfermedad general, al analizarlo se puede encontrar otros factores que conlleven a la ausencia del trabajador y con ello producir alteración al normal funcionamiento de la empresa, por lo que resulta indispensable estudiar este tema. Objetivo Caracterizar las principales causas de ausentismo laboral en los médicos generales de una IPS que presta servicios de consulta externa de medicina general a nivel nacional durante el año 2014. Materiales y Métodos: es un estudio de corte transversal sobre datos secundarios correspondientes al registro de incapacidades que presento la IPS durante el año 2014. Los criterios de inclusión fueron los médicos generales con los que contaba la IPS que presta servicios de salud a nivel nacional durante el año 2014 y los criterios de exclusión fueron las licencias de maternidad y paternidad. El tamaño de la muestra final fue de 202 médicos y el número de incapacidades que se presentó durante el año 2014 fue 313. Se realizó análisis de distribución de frecuencias, porcentaje y prevalencia de las incapacidades. Resultados: durante el año 2014 se presentaron 313 incapacidades, en una población de 202 médicos generales con prevalencia en las mujeres. El diagnóstico más frecuente de las incapacidades fue la categoría diagnostica “otros” en el cual se encuentra migraña, vértigo, alteraciones de la mama con 59 incapacidades, seguida por enfermedades gastrointestinales con 25 incapacidades. Conclusiones y recomendaciones: Las incapacidades fueron más frecuentes en mujeres que en hombres. El diagnóstico de las incapacidades más frecuente fue “enfermedad genérica o ausencia de diagnóstico”. La incapacidad más frecuente de un día que se presentaron 46 registros. El médico que mayor número de incapacidades presento fue de 18 para el año 2014. Se recomienda a la empresa tener un seguimiento de las incapacidades repetitivas, ya que estas podrían tener relación con enfermedad laboral que aún no ha sido calificada. Se recomienda complementar la base de datos con información como el antecedente de enfermedad crónica y el sedentarismo, lo que puede permitir realizar nuevos estudios respecto al riesgo cardiovascular de esta población.

A indústria de refinação de petróleo : características e tratamento das águas residuais

A poluição das águas por hidrocarbonetos pode originar grandes problemas associados a contaminantes orgânicos e inorgânicos uma vez que os combustíveis fósseis, como o petróleo e os seus derivados, são matérias-primas para a produção de energia na maioria dos processos industriais actuais. Os hidrocarbonetos reduzem a oxigenação e a penetração da luz natural nos cursos de água, devido à formação de um filme insolúvel na superfície, produzindo efeitos nocivos na fauna e flora aquática. Neste trabalho é apresentada uma síntese das diferentes tecnologias disponíveis e habitualmente usadas para o tratamento de efluentes de Refinarias de petróleo e disponibilizam-se resultados da eficiência de remoção de vários poluentes ao longo do processo de tratamento dos efluentes gerados, resumindo-se as principais dificuldades com que o tratamento deste tipo de efluentes se depara.

¿Es posible el matrimonio de las “siete hermanas” del Sur?. Posibilidades de cooperación en petróleo y gas en América Latina (Tema Central)

Este artículo explora las posibilidades de concretar resultados de una de las principales iniciativas del presidente venezolano Hugo Chávez: aumentar la cooperación entre las mayores compañías petroleras de América Latina. Así, se presenta una mirada global de la industria petrolera, un perfil de cada una de estas industrias de América Latina y luego se examinan los obstáculos y los potenciales que presenta esta iniciativa, así como también los pasos necesarios que deben adelantarse para la concreción de la misma.

Terrestrial exposure of oilfield flowline additives diminish soil structural stability and remediative microbial function

Onshore oil production pipelines are major installations in the petroleum industry, stretching many thousands of kilometres worldwide which also contain flowline additives. The current study focuses on the effect of the flowline additives on soil physico-chemical and biological properties and quantified the impact using resilience and resistance indices. Our findings are the first to highlight deleterious effect of flowline additives by altering some fundamental soil properties, including a complete loss of structural integrity of the impacted soil and a reduced capacity to degrade hydrocarbons mainly due to: (i) phosphonate salts (in scale inhibitor) prevented accumulation of scale in pipelines but also disrupted soil physical structure; (ii) glutaraldehyde (in biocides) which repressed microbial activity in the pipeline and reduced hydrocarbon degradation in soil upon environmental exposure; (iii) the combinatory effects of these two chemicals synergistically caused severe soil structural collapse and disruption of microbial degradation of petroleum hydrocarbons.

Leukemia risk associated with low-level benzene exposure

Background: Men who were part of an Australian petroleum industry cohort had previously been found to have an excess of lympho-hematopoietic cancer. Occupational benzene exposure is a possible cause of this excess.

Methods: We conducted a case-control study of lympho-hematopoietic cancer nested within the existing cohort study to examine the role of benzene exposure. Cases identified between 1981 and 1999 (N = 79) were age-matched to 5 control subjects from the cohort. We estimated each subject's benzene exposure using occupational histories, local site-specific information, and an algorithm using Australian petroleum industry monitoring data.

Results: Matched analyses showed that the risk of leukemia was increased at cumulative exposures above 2 ppm-years and with intensity of exposure of highest exposed job over 0.8 ppm. Risk increased with higher exposures; for the 13 case-sets with greater than 8 ppm-years cumulative exposure, the odds ratio was 11.3 (95% confidence interval = 2.85-45.1). The risk of leukemia was not associated with start date or duration of employment. The association with type of workplace was explained by cumulative exposure. There is limited evidence that short-term high exposures carry more risk than the same amount of exposure spread over a longer period. The risks for acute nonlymphocytic leukemia and chronic lymphocytic leukemia were raised for the highest exposed workers. No association was found between non-Hodgkin lymphoma or multiple myeloma and benzene exposure, nor between tobacco or alcohol consumption and any of the cancers.

Conclusions: We found an excess risk of leukemia associated with cumulative benzene exposures and benzene exposure intensities that were considerably lower than reported in previous studies. No evidence was found of a threshold cumulative exposure below which there was no risk.