Direct evidence of redox interaction between metal ion and support oxide in Ce(0.98)Pd(0.02)O(2-delta) by a combined electrochemical and XPS study

A combined electrochemical method and X-ray photo electron spectroscopy (XPS) has been utilized to understand the Pd(2+)/CeO(2) interaction in Ce(1-x)Pd(x)O(2-delta) (x = 0.02). A constant positive potential (chronoamperometry) is applied to Ce(0.98)Pd(0.02)O(2-delta) working electrode which causes Ce(4+) to reduce to Ce(3+) to the extent of similar to 35%, while Pd remains in the +2 oxidation state. Electrochemically cycling this electrode between 0.0-1.2 V reverts back to the original state of the catalyst. This reversibility is attributed to the reversible reduction of Ce(4+) to Ce(3+) state. CeO(2) electrode with no metal component reduces to CeO(2-y) (y similar to 0.4) after applying 1.2 V which is not reversible and the original composition of CeO(2) cannot be brought back in any electrochemical condition. During the electro-catalytic oxygen evolution reaction at a constant 1.2 V for 1000 s, Ce(0.98)Pd(0.02)O(2-delta) reaches a steady state composition with Pd in the +2 states and Ce(4+) : Ce(3+) in the ratio of 0.65 : 0.35. This composition can be denoted as Ce(0.63)(4+)Ce(0.35)(4+)Pd(0.02)O(2-delta-y) (y similar to 0.17). When pure CeO(2) is put under similar electrochemical condition, it never reaches the steady state composition and reduces almost to 85%. Thus, Ce(0.98)Pd(0.02)O(2-delta) forms a stable electrode for the electro-oxidation of H(2)O to O(2) unlike CeO(2) due to the metal support interaction.

Homo- and Heteronuclear Transition Metal Complexes Supported by Multinucleating Ligands

This dissertation is mainly divided into two sub-parts: organometallic and bioinorganic/materials projects. The approach for the projects involves the use of two different multinucleating ligands to synthesize mono- and multinuclear complexes. Chapter 2 describes the synthesis of a multinucleating tris(phosphinoaryl)benzene ligand used to support mono-nickel and palladium complexes. The isolated mononuclear complexes were observed to undergo intramolecular arene C¬–H to C–P functionalization. The transformation was studied by nuclear magnetic resonance spectroscopy and X-ray crystallography, and represents a rare type of C–H functionalization mechanism, facilitated by the interactions of the group 10 metal with the arene π–system.

Chapter 3 describes the construction of multinickel complexes supported by the same triphosphine ligand from Chapter 2. This chapter shows how the central arene in the ligand’s triarylbenzene framework can interact with dinickel and trinickel moieties in various binding modes. X-ray diffraction studies indicated that all compounds display strong metal–arene interactions. A cofacial triangulo nickel(0) complex supported by this ligand scaffold was also isolated and characterized. This chapter demonstrates the use of an arene as versatile ligand design element for small molecular clusters.

Chapter 4 presents the syntheses of a series of discrete mixed transition metal Mn oxido clusters and their characterization. The synthesis of these oxide clusters displaying two types of transition metals were targeted for systematic metal composition-property studies relevant to mixed transition metal oxides employed in electrocatalysis. A series of heterometallic trimanganese tetraoxido cubanes capped with a redox-active metal [MMn₃O₄] (M = Fe, Co, Ni, Cu) was synthesized starting from a [CaMn₃O₄] precursor and structurally characterized by X-ray crystallography and anomalous diffraction to conclusively determine that M is incorporated at a single position in the cluster. The electrochemical properties of these complexes were studied via cyclic voltammetry. The redox chemistry of the series of complexes was investigated by the addition of a reductant and oxidant. X-ray absorption and electron paramagnetic resonance spectroscopies were also employed to evaluate the product of the oxidation/reduction reaction to determine the site of electron transfer given the presence of two types of redox-active metals. Additional studies on oxygen atom transfer reactivities of [MMn₃O₄] and [MMn₃O₂] series were performed to investigate the effect of the heterometal M in the reaction rates.

Chapter 5 focuses on the use of [CoMn₃O₄] and [NiMn₃O₄] cubane complexes discussed in Chapter 4 as precursors to heterogeneous oxygen evolution reaction (OER) electrocatalysts. These well-defined complexes were dropcasted on electrodes with/without heat treatment, and the OER activities of the resulting films were evaluated. Multiple spectroscopic techniques were performed on the surface of the electrocatalysts to gain insight into the structure-function relationships based on the heterometallic composition. Depending on film preparation, the Co-Mn-oxide was found to change metal composition during catalysis, while the Ni-Mn oxide maintained the NiMn3 ratio. These studies represent the use of discrete heterometallic-oxide clusters as precursors for heterogeneous water oxidation catalysts.

Appendix A describes the ongoing effort to synthesize a series of heteromultimetallic [MMn₃X] clusters (X = O, S, F). Complexes such as [ZnMn₃O], [CoMn₃O], [Mn₃S], and [Mn₄F] have been synthesized and structurally characterized. An amino-bis-oxime ligand (PRABO) has been installed on the [ZnMn₃O] cluster. Upon the addition of O₂, the desymmetrized [ZnMn₃O] cluster only underwent an outer-sphere, one-electron oxidation. Efforts to build and manipulate other heterometallic [MMn₃X] clusters are still ongoing, targeting O₂ binding and reduction. Appendix B summarizes the multiple synthetic approaches to build a [Co₄O₄]-cubane complex relevant to heterogeneous OER electrocatalysis. Starting with the tricobalt cluster [LCo₃(O₂CR)₃] and treatment various strong oxidants that can serve as oxygen atom source in the presence Co²⁺ salt only yielded tricobalt mono–oxo complexes. Appendix C presents the efforts to model the H-cluster framework of [FeFe]-hydrogenase by incorporating a synthetic diiron complex onto a protein-supported or a synthetic ligand-supported [Fe₄S₄]-cluster. The mutant ferredoxin with a [Fe₄S₄]-cluster and triscarbene ligand have been characterized by multiple spectroscopic techniques. The reconstruction of an H-cluster mimic has not yet been achieved, due to the difficulty of obtaining crystallographic evidence and the ambiguity of the EPR results.

高产小麦旗叶和芒细胞结构及其光合性能的研究

小麦旗叶的光合产物是其籽粒碳水化合物的主要来源，因此如何提高旗叶的光合能力从而提高小麦产量一直是小麦研究的热点。但是以往对高产小麦旗叶的研究主要集中在光合功能和生理生化指标等方面，很少涉及其结构与功能的联系，以及对亲本与子代的旗叶进行对比观察。本文以冬小麦亲本小偃54 、8602及其子代小偃81（高产品种）灌浆期的旗叶为材料，应用细胞离析法、组织切片和荧光显微技术等，对旗叶中叶肉细胞形态、叶绿体数目、叶片厚度、维管束数目和面积等进行了比较观察和测定，旨在探讨小麦旗叶结构与其光合效率的关系。研究结果表明，与亲本小偃54、8602相比，子代小偃81的叶片较厚，横切面内中央大维管束的周长与面积较大;高环数叶肉细胞所占比例、叶肉细胞的周长及其平面面积和细胞内叶绿体的数目等均大于亲本。由此可见，通过小麦品种的改良确实能使其旗叶的结构与光合细胞发生了明显的变化，从而为植物细胞结构和功能的密切关系提供了有力的证据;同时也为作物改良育种提供了又一种新的育种目标。 　　小麦非叶器官之一的芒，对其结构与光合特性关系的研究尚不够深入和广泛。本实验以具芒小麦高产耐旱品种京411籽粒不同发育时期的芒及旗叶为材料，对其叶绿体结构、放氧速率和磷酸烯醇式丙酮酸羧化酶(PEPCase EC 4.1.1.31)的活性进行了比较观察和测定。超微结构显示，从抽穗期开始，芒和旗叶中的叶绿体基粒及其垛叠度均有增加，之后由灌浆末期开始，叶绿体的膜系统开始逐渐解体。通过放氧速率的测定表明，在芒和旗叶中，光合速率在前几个时期呈上升趋势，随着器官的衰老逐渐下降，但是，旗叶放氧速率的下降比芒中更早。另外，芒的PEPCase活性在籽粒发育的整个过程中均高于旗叶，其中以籽粒干物质形成末期尤为显著。因此，芒对高产小麦籽粒的形成，特别是在干物质形成的后期起着更为重要的作用。 　　

磷脂对光系统II光合放氧的影响及其作用机理的研究

以类囊体膜中唯一的阴离子型磷脂一磷脂酰甘油(PG)为研究对象，应用放氧测定和富立叶红外光谱等实验方法和技术手段，对PG与光系统II (PSII)之间的相互作用进行了研究。 研究表明，PG对PSII的放氧活性产生显著影响，具有明显的浓度效应。在低浓度(2～22 mg PG／mg Chl)时对PSII的放氧活性有明显的促进作用，而在高浓度(24～40 mg PG／mg Chl)下则表现出显著的抑制作用。 PG对PSII放氧活性的影响与其引起蛋白结构的改变密切相关。结果显示，PG的作用导致PSII颗粒中蛋白质二级结构的改变，主要表现为α-螺旋、β-折叠的增加和无规卷曲的减少。 不仅如此，红外光谱的分析还表明，PG还使蛋白酪氨酸残基中的酚基构象及其周围的微极性发生改变，即在红外光谱的1620—1500 cm-1，之间芳香环骨架的伸缩振动带向高频方向变化，其吸收强度也相应增加;在3500～3100 cm. -1间出现新的氢键吸收峰。 PG除能促进PSII的放氧活性以外，还对PSII表现出新的作用，即PG可以使PSII颗粒因缺钙而受抑制的放氧活性得到恢复;外加Ca2+可使PG表现出对缺钙PSII颗粒(dc。PSII)放氧活性的更大促进作用，且随Ca2+浓度的增加，促进作用也越显著。 PG的作用也使dc。PSII蛋白的结构发生了改变，导致蛋白二级结构中a-螺旋、p_折叠结构的增加和转角、无规卷曲成分的减少，即可使PSII颗粒因缺钙而改变的蛋白结构基本得到恢复。PG还能与Ca2+形成离子对似的配合物，而这种配合物的形成可以优化缺钙PSII颗粒的功能如放氧活性等。

光合放氧结构与机理的理论探索

光合放氧研究近十年来已有重要进展，但在该领域仍有很多重要问题待研究。本论文工作主要是对光系统氧化侧与光合放氧密切相关的组分的结构和性能进行理论和模拟研究，工作可概括如下： (一)、放氧中心结构和性能的探索。 1、对放氧中心Mn202单元与配体组氨酸、H2O和Cl等结合方式的理论研究显示：(a)、组氨酸和H20分子均可能与Mn202平面垂直，彼此保持较大的距离，且结合在不同的Mn离子上;(b)、2个H2O分子可能结合在不同Mn202单元上。 2、对Mn簇核心骨架的理论研究显示有必要引入新的Ca、Cl结合方式，以防止因两个Mn202单元线性化而导致2个H2O分子结合位点远离。 (二)、次级电子给体Tyr_z和Tyr_D的结构与功能。 对次级电子给体Tyr_z和Tyr_D进行精确量子化学研究显示：(a)、在中性条件下，Tyr_D和Tyr_z均只与组氨酸通过氢键作用;(b)、当失去电子后，结构发生明显变化，导致正电荷主要集中在组氨酸上，自由基主要集中在Tyr上;(c)、第三组分(H_20分子或羧基等)的引入使中性体系不容易给出电子;(d)、结合最新文献报导，推测Tyr_D~+和Tyr_z~+除与组氨酸作用外还可能分别与水和羧基作用。 (三)、原初电子给体的理论和模拟研究。 1、对紫细菌原初电子给体P_(870)的理论研究显示：(a)、双分子结构比单分子结构稳定;(b)、电荷分离之后，原初电子给体原有的空间结构不再是稳定的构型，它会向能量和化学活性均更低的构型转变。在光合细菌的原初电子给体P870中，这种转变可通过C3位的乙酰基旋转使其氧原子与另一个细菌叶绿素分子的镁原子相互作用使P870+•的总能量和化学活性明显降低。推测这种构型转变对于防止原初反应过程中的电荷重组、维持光能的高效转化有重要意义。提出了原初反应过程中结构动态变化的新观点，利用这一观点可对光合细菌原初反应动力学研究所观测到的慢过程及蛋白质微环境对原初电子给体和原初反应都有重要影响等实验现象给予较好的解释。 2、对光系统II原初电子给体P680的结构进行理论探讨，提出了两个叶绿素a分子平面间夹角为50.0±2.5°时能量最低的夹角模型。 3、采用N-甲基咪唑(C4H6N2)模拟生物体内的组氨酸，通过观测CCL4中的Chla与C4H6N2反应的吸收、CD和MCD光谱得到以下结论：(a)、在纯CCL4中，每个Chla处于5配位状态，Chla形成不对称的双聚体，彼此之间存在较强的偶合作用。提出两个Chla通过不等价的2个Mg-O配位键(O分别来自于C131位的酮基和C17位酯基的C=O)连接为紧密双体结构;(b)、当C4H6N2／Chla = 0.5和1时，其吸收、CD和MCD光谱均发生明显变化，两个Chla之间的偶合作用明显减弱，但此时仍为双聚体。推测C4H6N2首先取代原紧密双体结构中Mg-O酯键，进而取代Mg-O酮键，最后两个Chla分子通过两个Mg…O弱相互作用连接为松弛的双体结构，该模型与理论获得的P_(680)的结构相似。 在上述研究的基础上，提出了包括放氧中心外围配体和TyrZ在内的放氧中心结构新模型。在新结构模型中，2个H2O分子不对称地结合于“C”形结构开口端两个低价的Mn1II和Mn4III上，并保持较大距离;两个组氨酸的咪唑环通过N原子与两个高价的Mn2IV、Mn3IV结合;Cl结合于MB4TM，并与Ca相连;Ca通过O桥和COO-相连使两个Mn202单元保持特定空间构型。TyrZ通过组氨酸(D1-His190)与Mn簇作用。此外，新模型尝试着在O桥上引入质子。放氧中心结构及其邻近环境(包括TyrZ和TyrD)整体处于中性状态。 同时还提出了新的放氧机理，认为电子和质子的释放非同步进行，并首次明确提出两个水分子的不对称氧化和结构动态变化等观点。认为Ca在维持放氧中心的结构方面担负重要作用，C1与Mn离子之间的亲核作用变化是放氧中心结构变化的关键。

Physiological Responses of Microcystis aeruginosa PCC7806 to Nonanoic Acid Stress

A recent study has shown that nonanoic acid (NA) is one of the strongest allelochemicals to a cyanobacterium Microcystis aeruginosa, but the physiological responses of M. aeruginosa to NA stress remain unknown. In this study, physiological characters such as the growth rate, photosynthetic processes, phosphorus and nitrogen uptake kinetics, and the contents of intracellular microcystin of M. aeruginosa PCC7806 were studied under the NA stress. The results showed that the growth rates of M. aeruginosa PCC 7806 were significantly inhibited in all NA stress treatments during first 3 days after exposure, and the growth rate was recovered after 5-day exposure. After 2-day exposure, the contents of both phycocyanin and allophycocyanin per cell decreased at NA concentration of 4 mg L-1, and oxygen evolution was inhibited even at the concentration of 0.5 mg L-1, but carotenoid content per cell was slightly boosted in NA stress. Physiological recovery of M. aeruginosa PCC7806 was observed after 7-day exposure to NA. It was shown that NA stress had no effect on uptake of nitrogen, but could stimulate the uptake of phosphorus. The contents of intracellular microcystin have not been affected in all NA treatments in contrast with the control. (C) 2008 Wiley Periodicals, Inc. Environ Toxicol 24: 610-617, 2009.

Enhanced protection against oxidative stress in an astaxanthin-overproduction Haematococcus mutant (Chlorophyceae)

Many unicellular green algae can become yellow or red in various natural habitats due to mass accumulation of a secondary carotenoid, such as lutein, or astaxanthin. The accumulation of secondary carotenoids is generally thought to be a survival strategy of the algae under photo-oxidative stress or other adverse environmental conditions. The physiological role of the carotenoids in stress response is less well understood at the subcellular or molecular level. In this study, a stable astaxanthin overproduction mutant (MT 2877) was isolated by chemical mutagenesis of a wild type (WT) of the green microalga Haematococcus pluvialis Flotow NIES-144. MT 2877 was identical to the WT with respect to morphology, pigment composition, and growth kinetics during the early vegetative stage of the life cycle. However, it had the ability to synthesize and accumulate about twice the astaxanthin content of the WT under high light, or under high light in the presence of excess amounts of ferrous sulphate and sodium acetate. Under stress, the mutant exhibited higher photosynthetic activities than the WT, based on considerably higher chlorophyll fluorescence induction, chlorophyll autofluorescence intensities, and oxygen evolution rates. Cell mortality caused by stress was reduced by half in the mutant culture compared with the WT. Enhanced protection of the mutant against stress is attributed to its accelerated carotenogenesis and accumulation of astaxanthin. Our results suggest that MT 2877, or other astaxanthin overproduction Haematococcus mutants, may offer dual benefits, as compared with the wild type, by increasing cellular astaxanthin content while reducing cell mortality during stress-induced carotenogenesis.

Response of Microcystis to copper stress - Do phenotypes of Microcystis make a difference in stress tolerance?

To elucidate the role of phenotype in stress-tolerant bloom-forming cyanobacterium Microcystis, two phenotypes of M. aeruginosa-unicellular and colonial strains were selected to investigate how they responded to copper stress. Flow cytometry (FCM) examination indicated that the percents of viable cells in unicellular and colonial Microcystis were 1.92-2.83% and 72.3-97.51%, respectively, under 0.25 mg l(-1) copper sulfate treatment for 24 h. Upon exposure to 0.25 mg l(-1) copper sulfate, the activities of antioxidative enzyme, such as superoxide dismutase (SOD) and catalase (CAT), were significantly increased in colonial Microcystis compared to unicellular Microcystis. Meanwhile, the values of the photosynthetic parameters (F-v/F-m, ETRmax and oxygen evolution rate) decreased more rapidly in unicellular Microcystis than in colonial Microcystis. The results indicate that colonial Microcystis has a higher endurance to copper than unicellular Microcystis. This suggests that the efficient treatment concentration of copper sulfate as algaecides will be dependent on the phenotypes of Microcystis. (C) 2006 Elsevier Ltd. All rights reserved.

Phycobilisome-Deficient Strains of Synechocystis sp. PCC 6803 Have Reduced Size and Require Carbon-Limiting Conditions to Exhibit Enhanced Productivity.

Reducing excessive light harvesting in photosynthetic organisms may increase biomass yields by limiting photoinhibition and increasing light penetration in dense cultures. The cyanobacterium Synechocystis sp. PCC 6803 harvests light via the phycobilisome, which consists of an allophycocyanin core and six radiating rods, each with three phycocyanin (PC) discs. Via targeted gene disruption and alterations to the promoter region, three mutants with two (pcpcT→C) and one (ΔCpcC1C2:pcpcT→C) PC discs per rod or lacking PC (olive) were generated. Photoinhibition and chlorophyll levels decreased upon phycobilisome reduction, although greater penetration of white light was observed only in the PC-deficient mutant. In all strains cultured at high cell densities, most light was absorbed by the first 2 cm of the culture. Photosynthesis and respiration rates were also reduced in the ΔCpcC1C2:pcpcT→C and olive mutants. Cell size was smaller in the pcpcT→C and olive strains. Growth and biomass accumulation were similar between the wild-type and pcpcT→C under a variety of conditions. Growth and biomass accumulation of the olive mutant were poorer in carbon-saturated cultures but improved in carbon-limited cultures at higher light intensities, as they did in the ΔCpcC1C2:pcpcT→C mutant. This study shows that one PC disc per rod is sufficient for maximal light harvesting and biomass accumulation, except under conditions of high light and carbon limitation, and two or more are sufficient for maximal oxygen evolution. To our knowledge, this study is the first to measure light penetration in bulk cultures of cyanobacteria and offers important insights into photobioreactor design.

Photosynthetic bicarbonate utilization by a terrestrial cyanobacterium, Nostoc flagelliforme (Cyanophyceae)

The photosynthetic characteristics of the terrestrial cyanobacterium, Nostoc flagelliforme, after complete recovery by rewetting, was investigated to see whether it could use bicarbonate as the external inorganic carbon source when submerged. The photosynthesis-pH relationship and high pH compensation point suggested that the terrestrial alga could use bicarbonate to photosynthesize when submerged. The photosynthetic oxygen evolution rates were significantly inhibited in Na+-free and Na+ + Li+ media but were not affected by the absence of Cl-, implying that the bicarbonate uptake was associated with Na+/HCO3- symport rather than Cl-/HCO3- exchange system.

Effects of Irradiance and Temperature on the Photosynthesis and Vegetative Propagation of Caulerpa serrulata

The photosynthetic oxygen evolution of Caulerpa serrulata was determined with oxygen electrodes. The effects of light and temperature on the growth and regeneration of fragmented C. serrulata thalli were analyzed. The regenerating rate and establishment of different sizes and portions of C. serrulata were studied. The results showed that the light saturation point of C. serrulata was 200 mu mol photons/m(2) per s and the optimum growth temperature was 25-30 degrees C. Under these conditions, the maximum photosynthetic oxygen evolution rate was 15.1 +/- 0.29 mg O-2/mg Chl a/h, the growth rate and elongation rate reached the highest values, 4.67 +/- 0.09 mg FW/d and 0.78 +/- 0.01 mm/d, respectively. The fragmented C. serrulata thalli was regenerated at 20-35 degrees C and survived at 15 degrees C and 200 mu mol photons/m(2) per s. A different survival rate was detected according to fragment size. All of these results indicated that C. serrulata was a candidate to become an invasive species if introduced into a new place. Therefore, we should pay more attention to C. serrulata for its potential threat to marine ecosystem when it is sold for aquarium use.

Polymer electrolyte membrane water electrolyser with Aquivion short side chain perfluorosulfonic acid ionomer binder in catalyst layers

The Aquivion short-side-chain (SSC) perfluorosulfonic acid (PFSA) ionomer was adopted in catalyst layers (CL) of polymer electrolyte membrane water electrolysers (PEMWE) instead of long-side-chain (LSC) Nafion ionomer. The effects of SSC ionomer content in CL for oxygen evolution reaction were studied in half cell with cyclic voltammetry and steady state linear sweep. In a single cell test the MEA with SSC-PFSA Aquivion ionomer exhibited better thermal stability than the one with LSC-PFSA Nafion ionomer at 90 °C. The cell voltage at a current density of 1 A cm was 1.63 V at 90 °C using the SSC-PFSA Aquivion ionomer binder, Nafion 117 membrane, and without back pressurizing. In a continuous operation the cell voltage degradation rate of the MEA using Aquivion ionomer binder was only about 0.82 mV h.

Physical and electrochemical evaluation of ATO supported IrO2 catalyst for proton exchange membrane water electrolyser

Antimony doped tin oxide (ATO) was studied as a support material for IrO₂ in proton exchange membrane water electrolyser (PEMWE). Adams fusion method was used to prepare the IrO₂-ATO catalysts. The physical and electrochemical characterisation of the catalysts were carried out using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), powder conductivity, cyclic voltammetry (CV) and membrane electrode assembly (MEA) polarisation. The BET surface area and electronic conductivity of the supported catalysts were found to be predominantly arisen from the IrO₂. Supported catalyst showed higher active surface area than the pristine IrO₂ in CV analysis with 85% H₃PO₄ as electrolyte. The MEA performance using Nafion®−115 membrane at 80 °C and atmospheric pressure showed a better performance for IrO₂ loading ≥60 wt.% than the pristine IrO₂ with a normalised current density of 1625 mA cm⁻² @1.8 V for the 60% IrO₂-ATO compared to 1341 mA cm⁻² for the pristine IrO₂ under the same condition. The higher performance of the supported catalysts was mainly attributed to better dispersion of active IrO₂ on electrochemically inactive ATO support material, forming smaller IrO₂ crystallites. A 40 wt.% reduction in the IrO₂ was achieved by utilising the support material.

Identifying the distinct features of geometric structures for hole trapping to generate radicals on rutile TiO2(110) in photooxidation using density functional theory calculations with hybrid functional

Using density functional theory calculations with HSE 06 functional, we obtained the structures of spin-polarized radicals on rutile TiO2(110), which is crucial to understand the photooxidation at the atomic level, and further calculate the thermodynamic stabilities of these radicals. By analyzing the results, we identify the structural features for hole trapping in the system, and reveal the mutual effects among the geometric structures, the energy levels of trapped hole states and their hole trapping capacities. Furthermore, the results from HSE 06 functional are compared to those from DFT + U and the stability trend of radicals against the number of slabs is tested. The effect of trapped holes on two important steps of the oxygen evolution reaction, i.e. water dissociation and the oxygen removal, is investigated and discussed.

An investigation into the functional role of the D1:1 and D1:2 polypeptides in photosystem II in cyanobacteria : the effect of changing PSI/PSII ratio on photoinhibition in Synechococcus sp. PCC7942 /

The cyanobacterium Synechococcus sp. PCC 7942 (Anacystis nidulans R2) adjusts its photosynthetic function by changing one of the polypeptides of photosystem II. This polypeptide, called Dl, is found in two forms in Synechococcus sp. PCC 7942. Changing the growth light conditions by increasing the light intensity to higher levels results in replacement of the original form of D 1 polypeptide, D 1: 1, with another form, D 1 :2. We investigated the role of these two polypeptides in two mutant strains, R2S2C3 (only Dl:l present) and R2Kl (only Dl:2 present) In cells with either high or low PSI/PSII. R2S2C3 cells had a lower amplitude for 77 K fluorescence emission at 695 nm than R2Kl cells. Picosecond fluorescence decay kinetics showed that R2S2C3 cells had shorter lifetimes than R2Kl cells. The lower yields and shorter lifetimes observed in the D 1 and Dl:2 containing cells. containing cells suggest that the presence of D 1: 1 results in more photochemical or non-photochemical quenching of excitation energy In PSII. One of the most likely mechanisms for the increased quenching in R2S2C3 cells could be an increased efficiency in the transfer of excitation energy from PSII to PSI. However, photophysical studies including 77 K fluorescence measurements and picosecond time resolved decay kinetics comparing low and high PSI/PSII cells did not support the hypothesis that D 1: 1 facilitates the dissipation of excess energy by energy transfer from PSII to PSI. In addition physiological studies of oxygen evolution measurements after photoinhibition treatments showed that the two mutant cells had no difference in their susceptibility to photoinhibition with either high PSI/PSII ratio or low PSI/PSII ratio. Again suggesting that, the energy transfer efficiency from PSII to PSI is likely not a factor in the differences between Dl:l and Dl:2 containing cells.