Espacialização do biovolume de plantas aquáticas submersas a partir da integração de dados obtidos por sensores remotos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Crescimento e caracterização dos cristais de sulfato de níquel hexahidratado dopados com íons [MnH2O]2+ e com sulfato de magnésio heptahidratado

Neste trabalho, cristais de sulfato níquel dopados com íons de manganês (NSH: Mn) e cristais de sulfato níquel dopados com de íon de magnésio (NMgSH) foram crescidos e posteriormente caracterizados pelas técnicas de difração de raios X e de espectroscopia Raman. Os resultados obtidos mostraram que os cristais dopados possuem estrutura muito semelhante a do cristal de sulfato de níquel puro (NSH), com uma deformação anisotrópica nas dimensões da célula unitária em relação ao cristal puro. O objetivo do presente estudo foi crescer dois novos monocristais de boa qualidade óptica para serem usados como filtros ópticos de banda passante. Os cristais de sulfato de níquel hexa-hidratado (NHS) são conhecidos por possuírem espectros de transmissão óptica, que tem atraído muita atenção, pois apresentam duas regiões com alta eficiência de transmissão, aproximadamente 80%, sendo a primeira região entre 200 e 350 nm e a segunda entre 400 e 600 nm, e uma alta eficiência de absorção em outras regiões do espectro UV-VIS. Um espectro de transmissão de luz com estas características é semelhante a um filtro óptico. Analises Termogravimetric (TGA) foram realizadas para cristais puros e dopados. A temperatura de decomposição obtida para o NSH foi de 73 ° C, enquanto que os cristais de NSH:Mn e NMgSH apresentam valores de 82 ° C e 86 º C, respectivamente. Como pode ser facilmente percebido, a estabilidade térmica de cristais com o íons de Mn ou Mg em suas estruturas é significativamente maior. A banda de transmissão entre 200 e 350 nm no espectro óptico de NSH foi observada com redução significativa em sua largura nos espectros de transmissão dos cristais dopados restringindo assim a região do espectro conhecida como UVA.

Neutrophil extracellular traps identification in tegumentary lesions of patients with paracoccidioidomycosis and different patterns of NETs generation in vitro

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Light emission and current rectification in a molecular device: Experiment and theory

We have investigated optical and transport properties of the molecular structure 2,3,4,5-tetraphenyl-1-phenylethynyl-cyclopenta-2,4-dienol experimentally and theoretically. The optical spectrum was calculated using Hartree-Fock-intermediate neglect of differential overlap-configuration interaction model. The experimental photoluminescence spectrum showed a peak around 470nm which was very well described by the modeling. Electronic transport measurements showed a diode-like effect with a strong current rectification. A phenomenological microscopic model based on non-equilibrium Green's function technique was proposed and a very good description electronic transport was obtained. (C) 2012 American Institute of Physics. [http://dx.doi.org/10.1063/1.4767457]

Doppelresonanzmessungen an in einer Penningfalle gespeicherten Europium-Ionen zur Bestimmung des Kern-g-Faktors

Die differentielle Hyperfeinanomalie beschreibt den Isotopieeffekt der magnetischen Hyperfeinwechselwirkung und stellt eine Testmöglichkeit für Kernmodelle dar. Nachdem in einer Reihe von Messungen die A-Faktoren der Hyperfeinwechselwirkung im Grundzustand von zwei stabilen und fünf instabilen Europium-Isotopen bestimmt wurden, sollen nun die Kern-g-Faktoren der gleichen Isotope bestimmt werden.Um die Kern-g-Faktoren zu bestimmen, wurden zunächst die Termschemata des Grundzustandesder stabilen Isotope 151,153Eu+ simuliert. Wegen der hohen Kern- und Hüllenspins I=5/2, J=4 ergeben sich 54 Zeemanzustände und ein komplexes optisches Spektrum.Etwa 10^6 Ionen der beiden stabilen Isotope 151,153Eu+ werden in einer Penningfalle beieinem Magnetfeld von ca. 1.5T gespeichert. Durch Puffergas und Anregung einer Seitenbandfrequenzder Ionenbewegung wird optisches Pumpen in metastabile D-Zustände bei gleichzeitiger Kühlung der Ionenwolke verhindert.Bei Verstimmung eines frequenzverdoppelten Ti:Sa-Lasers wurde die Ionenfluoreszenz aufgenommen. Durch die Simulation der optischen Spektren gelang es, einzelne Übergänge des Isotopes 151Eu+ zu identifizieren. Mit Laser/Mikrowellen-Doppelresonanzmessungen erhält man ein in erster Ordnung dopplerfreies Mikrowellenspektren eines Überganges zwischen zwei Zeemanzuständen im Grundzustand.Durch Messung der Übergangsfrequenzen von insgesamt fünf Delta mI=+1 Übergängen und Bestimmung des Magnetfeldes durch Messung der Zyklotronfrequenz gespeicherter Elektronen konnte der gI-Faktor des Isotopes151Eu zu 151gI = 1.37734(6) bestimmt werden.

Banco de medidas automático para linealización de amplificadores

This work is focused on building and configuring a measurement test bench for non linear High Power Amplifiers, more precisely those ones based on the Envelope Elimination and Restoration. At first sight the test bench is composed of several arbitrary waveform generators, an oscilloscope, a vector signal generator and a spectrum analyzer all of them controlled remotely. The test bench works automatically, that is why several software control programs have been developed in order to control all this equipment. The control programs have been developed in Matlab/Octave Scripting language and at last chance in a more low level language as C. The signal processing algorithms, taking into account that the time alignment one is the most important, have been developed in Matlab/Octave Scripting too. An improvement of 10dB in the ACPR(Adjacent Channel Power Ratio) has been obtained just by applying the time alignment algorithm developed in this work

Tutoriales multimedia para sistemas de telecomunicación

Este Proyecto Fin de Carrera está destinado a la ilustración y aprendizaje del uso de varios dispositivos de los laboratorios del Departamento de Ingeniería Audiovisual y Comunicaciones, de la Escuela Universitaria de Ingeniería Técnica de Telecomunicación, de la Universidad Politécnica de Madrid, en forma de vídeos tutoriales basados en mediciones y prácticas habituales de las asignaturas del departamento para que puedan ser utilizados por los alumnos de la escuela como apoyo a las explicaciones del profesor en ocasiones puntuales. En concreto se han realizado hasta seis vídeos tutoriales en los que se explica: el diseño de un circuito impreso y la creación y fabricación de éste. Por otro lado, también se ha explicado el fenómeno del ruido de fase y cómo es el proceso de su medida, como una de las muchas características de un analizador de espectros. A modo de análisis, se ha realizado otro tutorial acerca de la modulación en FM, sus características y sus aplicaciones. Por último se ha hecho un estudio del comportamiento de un analizador de redes, exponiendo su funcionamiento y explicando su proceso de calibración. Para la realización de estos tutoriales se han utilizado diferentes aplicaciones sobre creación de vídeos multimedia, animación, producción de audio y narración. En especial se han usado: Sprint-Layout 5.0, Adobe Flash Professional CS5.5, Camtasia studio 7, Corel VideoStudio Pro X4, Loquendo TTS7 y WinPlot. Para el apartado de las grabaciones de las diferentes escenas se ha necesitado el uso de distintos instrumentos de medida del laboratorio tales como: analizador de espectros, analizador de redes, generador de señal, generador de funciones, osciloscopio y otros equipos adicionales como: cámara de vídeo y trípode del departamento. Para la composición de los diferentes tutoriales se ha comenzado creando un guion, para cada uno de ellos, estableciendo la aparición de las imágenes, vídeos, y locución. A continuación se exponen los diferentes temas en los que se han basado estos tutoriales de laboratorio, uno a uno. ABSTRACT. This Project is destined to learn the use of several devices at the laboratory of “Ingeniería Audiovisual y Comunicaciones” Department at “Escuela Universitaria de Ingeniería técnica de Telecomunicaciones” of “Universidad Politécnica de Madrid”, on the way as tutorial videos base on the subjects from this department to be used by the college students as help of the teacher’s explanations. In this project you will find up to six tutorial videos, showing: printed circuit design, printed circuit board manufacture. You can also find an explanation about the phenomenon of phase noise and how it’s its measurement process, as one of the many features of a spectrum analyzer. Another tutorial video is based on FM modulation, its features and applications. The last tutorial explains the networks analyzer functionalities and its calibration process. To carry out these tutorials different applications have been used to create multimedia videos, animation, audio production and storytelling. Such as Sprint Layout 5.0, Camtasia 7.0, Corel VideoStudio Pro X4, Adobe Flash Professional CS5.5, Loquendo TTS7 y WinPlot. About the recording side of the different scenes, several equipment have been required at the laboratory, such as spectrums analyzer, signal generator, oscilloscope, function generator, network analyzer and other additional devices, such as: a video camera with its tripod. The composition of the different tutorials has begun creating a script, for each of them, setting the times of appearance of images, video, speech and music. After this abstract, the different topics of the tutorials are showed, one by one.

Priority realloc: um mecanismo para alocação de rotas e recursos em redes EON.

Backbone networks are responsible for long-haul data transport serving many clients with a large volume of data. Since long-haul data transport service must rely on a robust high capacity network the current technology broadly adopted by the industry is Wavelength Division Multiplexing (WDM). WDM networks enable one single ber to operate with multiple high capacity channels, drastically increasing the ber capacity. In WDM networks each channel is associated with an individual wavelength. Therefore a whole wavelength capacity is assigned to a connection, causing waste of bandwidth in case the connection bandwidth requirement is less than the channel total capacity. In the last half decade, Elastic Optical Networks (EON) have been proposed and developed based on the fexible use of the optical spectrum known as the exigrid. EONs are adaptable to clients requirements and may enhance optical networks performance. For these reasons, research community and data transport providers have been demonstrating increasingly high interest in EONs which are likely to replace WDM as the universally adopted technology in backbone networks in the near future. EONs have two characteristics that may limit its ecient resources use. The spectrum fragmentation, inherent to the dynamic EON operation, decrease the network capacity to assign resources to connection requests increasing network blocking probability. The spectrum fragmentation also intensifides the denial of service to higher rate request inducing service unfairness. Due to the fact EONs were just recently developed and proposed, the aforementioned issues were not yet extensively studied and solutions are still being proposed. Furthermore, EONs do not yet provide specific features as differentiated service mechanisms. Differentiated service strategies are important in backbone networks to guarantee client\'s diverse requirements in case of a network failure or the natural congestion and resources contention that may occur at some periods of time in a network. Impelled by the foregoing facts, this thesis objective is three-fold. By means of developing and proposing a mechanism for routing and resources assignment in EONs, we intend to provide differentiated service while decreasing fragmentation level and increasing service fairness. The mechanism proposed and explained in this thesis was tested in a EON simulation environment and performance results indicated that it promotes beneficial performance enhancements when compared to benchmark algorithms.

Dimethylsulfide dehydrogenase from rhodovulum sulfidophilum: EPR spectroscopy and biochemical analysis reveal its place in the DMSO reductase family of molybdenum enzymes

Dimethylsulfide (DMS) dehydrogenase catalyses the oxidation of DMS to dimethylsulfoxide. The purified enzyme has three subunits of Mr = 94, 38 and 32 kDa and has an optical spectrum dominated by a b-type cytochrome. The metal ion and nucleotide analysis revealed 0.5 g-atom Mo, 9.8 g-atom Fe and 1.96 mol GMP per tool of enzyme. Taken together, these data indicate that DMS dehydrogenase contains a bis(MGD)Mo cofactor. A comparison of the Nterminal amino acid sequence of DMS dehydrogenase revealed that the Mo-containing ct-subunit was most closely related to the c~-subunits of nitrate reductase (NarG) and selenate reductase (SerA). Similarly, the [~-subunit of DMS dehydrogenase was most closely related to the [3-subunits of nitrate reductase (NarH) and selenate reductase (SerB). Variable temperature X-band EPR spectra (120-2K) of 'as isolated' DMS dehydrogenase showed resonances arising from multiple redox centres, Mo(V), [3Fe-4S] +, [4Fe-4S] ÷. A pH dependent EPR study of the Mo(V) centre in lH20 and 2H20 reveals the presence of three Mo(V) species in equilibrium, Mo(V)-OH2, Mo(V)-X and Mo(V)-OH. Between pH6 and 8.2 the dominant species is Mo(V)-OH2 and Mo(V)-X is a minor component. X is probably the anion, chloride. Comparison of the rhombicity and anisotropy parameters for the Mo(V) species in DMS dehydrogenase with other Mo(V) centres in metalloproteins showed that it was most similar to the low pH nitrite spectrum of E. coli nitrate reductase (NarGHI). The spin Hamiltonian parameters (2.0158, 1.8870, 1.8620) for the [4Fe-4S] + cluster suggests the presence of histidine (N) coordination to iron in this cluster. It is suggested that this unusual [Fe-S] cluster may be associated with a histidine-cysteine rich sequence at the N-terminus of the ct-subunit of DMS dehydrogenase.

Application of long period gratings sensors to respiratory function monitoring

A series of in-line curvature sensors on a garment are used to monitor the thoracic and abdominal movements of a human during respiration. These results are used to obtain volumetric tidal changes of the human torso showing reasonable agreement with a spirometer used simultaneously to record the volume at the mouth during breathing. The curvature sensors are based upon long period gratings written in a progressive three layered fibre that are insensitive to refractive index changes. The sensor platform consists of the long period grating laid upon a carbon fibre ribbon, which is encapsulated in a low temperature curing silicone rubber. An array of sensors is also used to reconstruct the shape changes of a resuscitation manikin during simulated respiration. The data for reconstruction is obtained by two methods of multiplexing and interrogation: firstly using the transmission spectral profile of the LPG's attenuation bands measured using an optical spectrum analyser; secondly using a derivative spectroscopy technique.

Simultaneous strain and temperature measurement of advanced 3-D braided composite materials using an improved EFPI/FBG system

Simultaneous strain and temperature measurement for advanced 3-D braided composite materials using fibre-optic sensor technology is demonstrated, for the first time. These advanced 3-D braided composites can virtually eliminate the most serious problem of delamination for conventional composites. A tandem in-fibre Bragg-grating (FBG)/extrinsic Fabry-Perot interferometric sensor (EFPI) system with improved accuracy has been used to facilitate simultaneous temperature and strain measurement in this work. The non-symmetric distortion of the optical spectrum of the FBG, due to the combination of the FBG and the EFPI, is observed for the first time. Experimental and theoretical studies indicate that this type of distortion can affect the measurement accuracy seriously and it is mainly caused by the modulation of the periodic output of the EFPI. A simple method has been demonstrated to improve the accuracy for detection of the wavelength-shift of the FBG induced by temperature change. A strain accuracy of ∼ ±20 με and a temperature accuracy of ∼ ±1 °C have been achieved, which can meet the requirements for practical applications of 3-D braided composites. © 2002 Elsevier Science Ltd. All rights reserved.

Polarization effects in polymer FBGs:study and use for transverse force sensing

Bragg gratings photo-inscribed in polymer optical fibers (POFs) are more sensitive to temperature and pressure than their silica counterparts, because of their larger thermo-optic coefficient and smaller Young's modulus. Polymer optical fiber Bragg gratings (POFBGs) are most often photo-written in poly(methylmethacrylate) (PMMA) based materials using a continuous-wave 325 nm HeCd laser. In this work, we present the first study about birefringence effects in POFBGs manufactured in different types of fiber. To achieve this, highly reflective (> 90%) gratings were produced with the phase mask technique. Their spectral response was then monitored in transmission with polarized light. Polarization dependent loss (PDL) and differential group delay (DGD) were computed from the Jones matrix eigenanalysis using an optical vector analyzer. Maximum values exceeding several dB and a few picoseconds were obtained for the PDL and DGD, respectively. An inverse scattering technique applied to the experimental data provided an estimate of the photo-induced birefringence value arising from the side fabrication process. The response to lateral force was finally investigated for various incident directions using the PDL response of FBGs manufactured in step-index POFs. As the force induced birefringence adds to the photo-induced one, a force dependent evolution of the PDL maximum value was noticed, with a good temperature-insensitivity.

Single-polarization, dual-wavelength mode-locked Yb-doped fiber laser by a 45°-tilted fiber grating

We experimentally demonstrate an all-fiber single-polarization dual-wavelength Yb-doped fiber laser passively mode-locked with a 45°-tilted fiber grating for the first time. Stable dual-wavelength operation exhibits double-rectangular spectral profile centered at 1033 and 1053 nm, respectively. The 3 dB bandwidth of each rectangular optical spectrum is estimated as 10 nm. The separation of two fundamental repetition rates is 6 kHz. By employing the 45° TFG with the polarization-dependent loss of 33 dB, output pulses with 27 dB polarization extinction ratio are implemented in the experiment. The single pulse centered at 1053 nm is researched by using a filter at the output port of the laser, and the experimental results denote that the output ps pulses are highly chirped. The formation mechanism of dual-wavelength operation is investigated.

Microfiber Fabry-Perot interferometer for dual-parameter sensing

We propose and demonstrate a microfiber Fabry-Perot interferometer (MFPI) fabricated by taper-drawing microfiber at the center of a uniform fiber Bragg grating (FBG). The MFPI employing the two separated sections of FBG as reflectors and a length of microfiber as its cavity is derived. Theoretic study shows that the reflection spectrum of such MFPI is consisted of two parts-interference fringes induced by multi-beam interference and reflection spectrum envelope induced by FBGs. Temperature affects both interference fringes and reflection wavelength of FBGs while ambient refractive index (RI) only influences the interference fringes, i.e., MFPI has different response to temperature and RI. Therefore, MFPI for simultaneous sensing of RI and temperature is experimentally demonstrated by tracking a reflection peak of interference fringes and the Bragg wavelength of the FBGs, which are respectively assisted by frequency domain processing and Gaussian fitting of the optical spectrum. Consequently, wavelength measurement resolution of 0.5 pm is realized. © 1983-2012 IEEE.

Passively harmonic mode locked erbium doped fiber soliton laser with carbon nanotubes based saturable absorber

We have proposed and demonstrated passive harmonic mode locking of an erbium doped fiber laser with soliton pulse shaping using carbon nanotubes polyvinyl alcohol film. Two types of samples prepared by using filtration and centrifugation were studied. The demonstrated fiber laser can support 10th harmonic order corresponding to 245 MHz repetition rate with an output power of ~12 mW. More importantly, all stable harmonic orders show timing jitter below 10 ps. The output pulses energies are between 25 to 56 pJ. Both samples result in the same central wavelength of output optical spectrum with similar pulse duration of ~1 ps for all harmonic orders. By using the same laser configuration, centrifugated sample exhibits slightly lower pulse chirp. © 2012 Optical Society of America.