Prediction of limit cycle oscillations under uncertainty using a Harmonic Balance method

The Harmonic Balance method is an attractive solution for computing periodic responses and can be an alternative to time domain methods, at a reduced computational cost. The current paper investigates using a Harmonic Balance method for simulating limit cycle oscillations under uncertainty. The Harmonic Balance method is used in conjunction with a non-intrusive polynomial-chaos approach to propagate variability and is validated against Monte Carlo analysis. Results show the potential of the approach for a range of nonlinear dynamical systems, including a full wing configuration exhibiting supercritical and subcritical bifurcations, at a fraction of the cost of performing time domain simulations.

Field Testing a Full-Scale Tidal Turbine Part 3: Acoustic Characteristics

Like any new technology, tidal power converters are being assessed for potential environmental impacts. Similar to wind power, where noise emissions have led to some regulations and limitations on consented installation sites, noise emissions of these new tidal devices attract considerable attention, especially due to the possible interaction with the marine fauna. However, the effect of turbine noise cannot be assessed as a stand-alone issue, but must be investigated in the context of the natural background noise in high flow environments. Noise measurements are also believed to be a useful tool for monitoring the operating conditions and health of equipment. While underwater noise measurements are not trivial to perform, this non-intrusive mon- itoring method could prove to be very cost effective. This paper presents sound measurements performed on the SCHOTTEL Instream Turbine as part of the MaRINET testing campaign at the QUB tidal test site in Portaferry during the summer of 2014. This paper demonstrates a comparison of the turbine noise emissions with the normal background noise at the test site and presents possible applications as a monitoring system.

Identificação de utilizadores seniores em televisão interativa (iTV) : uma matriz de decisão tecnológica

Desde que surgiu há mais de 50 anos, a televisão sofreu muitas transformações, tanto ao nível tecnológico (por exemplo com a passagem da emissão a preto/branco para cor, o som analógico para digital, a difusão digital) como a nível da sua influência nas sociedades. Entre outros fatores de ordem tecnológica, a consolidação da Internet com o seu elevado nível de personalização, da experiência de utilização, e a sua enorme quantidade de conteúdos disponíveis, catapultou a televisão no sentido de esta se tornar mais interativa. Assim, o telespectador passou a poder usufruir de uma experiência televisiva que pode, por um lado, ser mais participativa, sendo-lhe possível, por exemplo, alvitrar sobre a qualidade de um programa enquanto assiste à sua exibição, e, por outro, ser mais personalizada, possibilitando-lhe, por exemplo, receber conteúdos automaticamente adequados ao seu perfil e contexto. No entanto, esta experiência mais participativa e personalizável carece de uma identificação, idealmente automática e não intrusiva, de quem pode beneficiar da mesma – o telespectador. Contudo, e apesar de significativos avanços na área da televisão interativa, tanto ao nível da infraestrutura de suporte como ao nível dos serviços disponibilizados, a identificação dos utilizadores é, ainda, uma área de estudo com muitos aspetos por compreender. Os seniores, em particular, são grandes consumidores de televisão e representam uma fatia muito considerável das pessoas que podem beneficiar das potencialidades disponibilizadas pela interatividade presente em muitos serviços atuais. Um número crescente destes serviços são desenhados com o objetivo de promoverem um envelhecimento ativo e um concreto apoio à vida, pelo que os seniores podem beneficiar, em vários aspetos do seu quotidiano, se os utilizarem. Nesta faixa etária, a identificação de utilizadores tem, como elemento potenciador da experiência de utilização, um papel especialmente importante ao nível de um aproveitamento personalizado e dirigido destes serviços. No entanto, atendendo às diferentes combinações de características físicas, sensoriais, cognitivas e, mesmo, de literacia digital que tipificam os seniores, perspetivou-se existir uma dependência do perfil do utilizador na seleção do método de identificação mais adequado, os quais podem ser baseados, por exemplo, num leitor de impressões digitais, instalado no telecomando; na leitura de uma wearable tag ou de um cartão RFiD; no reconhecimento da face e, eventualmente, na voz do utilizador. Assim, a inerente investigação desenrolou-se em várias fases, no sentido de permitir alicerçar a construção de uma matriz de decisão tecnológica que, em função do perfil de utilizador, selecione o sistema de identificação mais adequado. O procedimento metodológico inerente à construção desta matriz de decisão, passou por um longo processo envolvendo utilizadores reais, que se iniciou com a realização de entrevistas exploratórias com o objetivo de permitir conhecer melhor os seniores e a forma como estes encaram a tecnologia e, mais concretamente, a televisão interativa. Foi depois implementado um protótipo de alta-fidelidade, completamente funcional, para a realização de testes com o objetivo de perceber qual a preferência relativamente a um subconjunto de tecnologias de identificação. Estes testes, uma vez que não permitiram testar todas as tecnologias em estudo, revelaram-se inconclusivos, porém permitiram reforçar a necessidade de identificar e caracterizar os referidos aspetos do perfil do utilizador que podem interferir na sua preferência relativamente ao sistema de identificação. As características identificadas constituíram-se como os parâmetros de entrada da matriz, sendo que para preencher as respetivas células realizaramse testes de aceitação, com um conjunto de seniores, tendo por base um protótipo, wizard of oz, especificamente implementado para permitir experienciar todas as tecnologias em estudo. Estes testes foram precedidos pela avaliação das capacidades funcionais dos participantes, nos diversos parâmetros definidos. Este texto relata, assim, todo o processo de investigação que foi conduzido, terminando com uma descrição de exemplos de utilização da matriz de decisão implementada e com a identificação de potenciais caminhos de desenvolvimento deste trabalho.

Embedded platform for ECG biometric recognition

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia de Electrónica e Telecomunicações

O brincador: a interação adulto-criança no momento da brincadeira

Relatório da UC Prática Profissional Supervisionada Mestrado em Educação Pré-Escolar

Reliability and availability in reconfigurable computing: a basis for a common solution

Dynamically reconfigurable SRAM-based field-programmable gate arrays (FPGAs) enable the implementation of reconfigurable computing systems where several applications may be run simultaneously, sharing the available resources according to their own immediate functional requirements. To exclude malfunctioning due to faulty elements, the reliability of all FPGA resources must be guaranteed. Since resource allocation takes place asynchronously, an online structural test scheme is the only way of ensuring reliable system operation. On the other hand, this test scheme should not disturb the operation of the circuit, otherwise availability would be compromised. System performance is also influenced by the efficiency of the management strategies that must be able to dynamically allocate enough resources when requested by each application. As those resources are allocated and later released, many small free resource blocks are created, which are left unused due to performance and routing restrictions. To avoid wasting logic resources, the FPGA logic space must be defragmented regularly. This paper presents a non-intrusive active replication procedure that supports the proposed test methodology and the implementation of defragmentation strategies, assuring both the availability of resources and their perfect working condition, without disturbing system operation.

Sistema de seguimento dos movimentos oculares para interface adaptada pessoa-máquina

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia de redes de Comunicação e Multimédia

Monolithic fused 1 x 4 couplers with high uniformity

A new method for the fabrication of high uniformity monolithic 1 x 4 single mode fused coupler is described together with details of its performance in terms of coupling ratio, spectral response and uniformity. The fabricated device exhibits ultra-broadband performance with a port-to-port uniformity of 0.4 dB. The reliability of such couplers is also evaluated and found to have good stability. Moreover, by controlling the process parameters it is possible to control the power remaining in the through put port of the device, which can be used for dedicated non-intrusive network health monitoring.

Monolithic fused 1 x 4 couplers with high uniformity

A new method for the fabrication of high uniformity monolithic 1 x4 single-mode fused coupler is described together with details of its performance in terms of coupling ratio, spectral response and uniformity. The fabricated device exhibits ultra-broadband performance with a port-to-port uniformity of 0.4 dB. The reliability of such couplers is also evaluated and found to have good stability. Moreover, by controlling the process parameters it is possible to control the power remaining in the through put port of the device, which can be used for dedicated non-intrusive network health monitoring

ReadingAct RGB-D action dataset and human action recognition from local features

For general home monitoring, a system should automatically interpret people’s actions. The system should be non-intrusive, and able to deal with a cluttered background, and loose clothes. An approach based on spatio-temporal local features and a Bag-of-Words (BoW) model is proposed for single-person action recognition from combined intensity and depth images. To restore the temporal structure lost in the traditional BoW method, a dynamic time alignment technique with temporal binning is applied in this work, which has not been previously implemented in the literature for human action recognition on depth imagery. A novel human action dataset with depth data has been created using two Microsoft Kinect sensors. The ReadingAct dataset contains 20 subjects and 19 actions for a total of 2340 videos. To investigate the effect of using depth images and the proposed method, testing was conducted on three depth datasets, and the proposed method was compared to traditional Bag-of-Words methods. Results showed that the proposed method improves recognition accuracy when adding depth to the conventional intensity data, and has advantages when dealing with long actions.

Towards a Monitoring Framework for Agent-Based Contract Systems

The behaviours of autonomous agents may deviate from those deemed to be for the good of the societal systems of which they are a part. Norms have therefore been proposed as a means to regulate agent behaviours in open and dynamic systems, and may be encoded in electronic contracts in order to specify the obliged, permitted and prohibited behaviours of agents that are signatories to such contracts. Enactment and management of electronic contracts thus enables the use of regulatory mechanisms to ensure that agent behaviours comply with the encoded norms. To facilitate such mechanisms requires monitoring in order to detect and explain violation of norms. In this paper we propose a framework for monitoring that is to be implemented and integrated into a suite of contract enactment and management tools. The framework adopts a non-intrusive approach to monitoring, whereby the states of a contract with respect to its contained norms can be inferred on the basis of messages exchanged. Specifically, the framework deploys agents that observe messages sent between contract signatories, where these messages correspond to agent behaviours and therefore indicate whether norms are, or are in danger of, being violated.

Sistema não-Intrusivo para Estimação da Direção do olhar utilizando redes neurais artificiais

The fundamental senses of the human body are: vision, hearing, touch, taste and smell. These senses are the functions that provide our relationship with the environment. The vision serves as a sensory receptor responsible for obtaining information from the outside world that will be sent to the brain. The gaze reflects its attention, intention and interest. Therefore, the estimation of gaze direction, using computer tools, provides a promising alternative to improve the capacity of human-computer interaction, mainly with respect to those people who suffer from motor deficiencies. Thus, the objective of this work is to present a non-intrusive system that basically uses a personal computer and a low cost webcam, combined with the use of digital image processing techniques, Wavelets transforms and pattern recognition, such as artificial neural network models, resulting in a complete system that performs since the image acquisition (including face detection and eye tracking) to the estimation of gaze direction. The obtained results show the feasibility of the proposed system, as well as several feature advantages.

An intelligent system to detect drilling problems through drilled cuttings return analysis

Cuttings return analysis is an important tool to detect and prevent problems during the petroleum well drilling process. Several measurements and tools have been developed for drilling problems detection, including mud logging, PWD and downhole torque information. Cuttings flow meters were developed in the past to provide information regarding cuttings return at the shale shakers. Their use, however, significantly impact the operation including rig space issues, interferences in geological analysis besides, additional personel required. This article proposes a non intrusive system to analyze the cuttings concentration at the shale shakers, which can indicate problems during drilling process, such as landslide, the collapse of the well borehole walls. Cuttings images are acquired by a high definition camera installed above the shakers and sent to a computer coupled with a data analysis system which aims the quantification and closure of a cuttings material balance in the well surface system domain. No additional people at the rigsite are required to operate the system. Modern Artificial intelligence techniques are used for pattern recognition and data analysis. Techniques include the Optimum-Path Forest (OPF), Artificial Neural Network using Multilayer Perceptrons (ANN-MLP), Support Vector Machines (SVM) and a Bayesian Classifier (BC). Field test results conducted on offshore floating vessels are presented. Results show the robustness of the proposed system, which can be also integrated with other data to improve the efficiency of drilling problems detection. Copyright 2010, IADC/SPE Drilling Conference and Exhibition.

Self-optimization of dense wireless sensor networks based on simulated annealing

Wireless sensor network (WSN) Is a technology that can be used to monitor and actuate on environments in a non-intrusive way. The main difference from WSN and traditional sensor networks is the low dependability of WSN nodes. In this way, WSN solutions are based on a huge number of cheap tiny nodes that can present faults in hardware, software and wireless communication. The deployment of hundreds of nodes can overcome the low dependability of individual nodes, however this strategy introduces a lot of challenges regarding network management, real-time requirements and self-optimization. In this paper we present a simulated annealing approach that self-optimize large scale WSN. Simulation results indicate that our approach can achieve self-optimization characteristics in a dynamic WSN. © 2012 IEEE.

Hermes: um software-modem ADSL baseado no framework Ptolemy II

Esta dissertação tem como objetivo principal apresentar a implementação de um software-modem ADSL totalmente escrito em Java, utilizando o framework Ptolemy II, denominado de Hermes (de "A Handy Experimental Software Modem System"). Um software-modem é útil em ocasiões onde se precisem executar testes e simulações de sistemas de comunicação com um número grande de modens e quando os parâmetros desses sistemas precisem ser modificados com um alto grau de liberdade. Além disso, um software-modem possui características que tornam mais fácil a tarefa de acrescentar, eliminar, validar e analisar funções e algoritmos de processamento de sinais e de telecomunicações. Testes e simulações foram realizados para analisar a funcionalidade do Hermes, utilizando, inclusive, o Tracespan, um equipamento para análise não-intrusiva de redes DSL. A partir dos resultados obtidos em conjunto com o Tracespan, foi possível validar com sucesso as funções do Hermes.