Mother’s experiences and perceptions of a continuous caring model with fathers after caesarean section : a qualitative study

Background: In Chile, mothers and newborns are separated after caesarean sections. The caesarean section rate in Chile is approximately 40%. Once separated, newborns will miss out on the benefits of early contact unless a suitable model of early newborn contact after caesarean section is initiated. Aim: To describe mothers experiences and perceptions of a continuous parental model of newborn care after caesarean section during mother-infant separation. Methods: A questionnaire with 4 open ended questions to gather data on the experiences and perceptions of 95 mothers in the obstetric service of Sótero Del Rio Hospital in Chile between 2009 and 2012. Data were analyzed using qualitative content analysis. Results: One theme family friendly practice after caesarean section and four categories. Mothers described the benefits of this model of caring. The fathers presence was important to mother and baby. Mothers were reassured that the baby was not left alone with staff. It was important for the mothers to see that the father could love the baby as much as the mother. This model of care helped create ties between the father and newborn during the period of mother-infant separation and later with the mother. Conclusions: Family friendly practice after caesarean section was an important health care intervention for the whole family. This model could be stratified in the Chilean context in the case of complicated births and all caesarean sections. Clinical Implications: In the Chilean context, there is the potential to increase the number of parents who get to hold their baby immediately after birth and for as long as they like. When the mother and infant are separated after birth, parents can be informed about the benefits of this caring model. Further research using randomized control trials may support biological advantages.

Private label supply chains: a model for competitiveness?

The search for efficiency in supply chains has usually focused on logistic optimization aspects. Initiatives like the ECR are an example. This research questions the appropriateness of this focus comparing detailed cost structures of fifteen consumer products, covering five different product categories. It compares supply chains of private label products, presumably more efficient due to closer collaboration between chain members, to national brands supply chains. The major source of cost differences lies in other indirect costs incurred by the national brands and not directly assignable to advertising. Results indicate that a complete reconception of the supply chain, exploring different governance structures offers greater opportunities for cost savings than the logistic aspect in isolation. Research was done in the UK in 1995-1997, but results are only now publishable due to confidentiality agreements

Influence of risk behavior aggregation in different categories of physical activity on the occurrence of cardiovascular risk factors

Background: We aimed to verify the association of risk behavior aggregation in different categories of physical activity (PA) with the presence of cardiovascular risk factors (RF) employees at a public university. Method. We analyzed data of 376 employees, which were visited in their workplace for measurement of weight, height and questionnaires to identify the risk behaviors and risk factors. Chi-square test was used to analyze the association between the dependent and independent variables and binary logistic regression was used to construct a multivariate model for the observed associations. Results: Associations were found between the aggregation of following risk behaviors: smoking, alcohol consumption and physical inactivity, considered in different categories of PA, and the increase in RF, except for the presence of hypertriglyceridemia. Individuals with two or more risk behaviors in occupational PA category are more likely to be hypertensive (3.04 times) and diabetes (3.44 times). For the free time PA category, these individuals were 3.18 times more likely to have hypercholesterolemia and for locomotion PA, more likely to be hypertensive (2.42 times) and obese (2.51 times). Conclusion: There are association between the aggregation of two or more risk behaviors and the presence of cardiovascular RF. © 2013 Bernardo et al.; licensee BioMed Central Ltd.

Towards a Model of Information Systems User Competency

The ability to utilize information systems (IS) effectively is becoming a necessity for business professionals. However, individuals differ in their abilities to use IS effectively, with some achieving exceptional performance in IS use and others being unable to do so. Therefore, developing a set of skills and attributes to achieve IS user competency, or the ability to realize the fullest potential and the greatest performance from IS use, is important. Various constructs have been identified in the literature to describe IS users with regard to their intentions to use IS and their frequency of IS usage, but studies to describe the relevant characteristics associated with highly competent IS users, or those who have achieved IS user competency, are lacking. This research develops a model of IS user competency by using the Repertory Grid Technique to identify a broad set of characteristics of highly competent IS users. A qualitative analysis was carried out to identify categories and sub-categories of these characteristics. Then, based on the findings, a subset of the model of IS user competency focusing on the IS-specific factors – domain knowledge of and skills in IS, willingness to try and to explore IS, and perception of IS value – was developed and validated using the survey approach. The survey findings suggest that all three factors are relevant and important to IS user competency, with willingness to try and to explore IS being the most significant factor. This research generates a rich set of factors explaining IS user competency, such as perception of IS value. The results not only highlight characteristics that can be fostered in IS users to improve their performance with IS use, but also present research opportunities for IS training and potential hiring criteria for IS users in organizations.

Fuzzy linguistic model for bioelectrical impedance vector analysis

Backgrounds Ea aims: The boundaries between the categories of body composition provided by vectorial analysis of bioimpedance are not well defined. In this paper, fuzzy sets theory was used for modeling such uncertainty. Methods: An Italian database with 179 cases 18-70 years was divided randomly into developing (n = 20) and testing samples (n = 159). From the 159 registries of the testing sample, 99 contributed with unequivocal diagnosis. Resistance/height and reactance/height were the input variables in the model. Output variables were the seven categories of body composition of vectorial analysis. For each case the linguistic model estimated the membership degree of each impedance category. To compare such results to the previously established diagnoses Kappa statistics was used. This demanded singling out one among the output set of seven categories of membership degrees. This procedure (defuzzification rule) established that the category with the highest membership degree should be the most likely category for the case. Results: The fuzzy model showed a good fit to the development sample. Excellent agreement was achieved between the defuzzified impedance diagnoses and the clinical diagnoses in the testing sample (Kappa = 0.85, p < 0.001). Conclusions: fuzzy linguistic model was found in good agreement with clinical diagnoses. If the whole model output is considered, information on to which extent each BIVA category is present does better advise clinical practice with an enlarged nosological framework and diverse therapeutic strategies. (C) 2012 Elsevier Ltd and European Society for Clinical Nutrition and Metabolism. All rights reserved.

Genes involved in thoracic exoskeleton formation during the pupal-to-adult molt in a social insect model, Apis mellifera

Background: The insect exoskeleton provides shape, waterproofing, and locomotion via attached somatic muscles. The exoskeleton is renewed during molting, a process regulated by ecdysteroid hormones. The holometabolous pupa transforms into an adult during the imaginal molt, when the epidermis synthe3sizes the definitive exoskeleton that then differentiates progressively. An important issue in insect development concerns how the exoskeletal regions are constructed to provide their morphological, physiological and mechanical functions. We used whole-genome oligonucleotide microarrays to screen for genes involved in exoskeletal formation in the honeybee thoracic dorsum. Our analysis included three sampling times during the pupal-to-adult molt, i.e., before, during and after the ecdysteroid-induced apolysis that triggers synthesis of the adult exoskeleton. Results: Gene ontology annotation based on orthologous relationships with Drosophila melanogaster genes placed the honeybee differentially expressed genes (DEGs) into distinct categories of Biological Process and Molecular Function, depending on developmental time, revealing the functional elements required for adult exoskeleton formation. Of the 1,253 unique DEGs, 547 were upregulated in the thoracic dorsum after apolysis, suggesting induction by the ecdysteroid pulse. The upregulated gene set included 20 of the 47 cuticular protein (CP) genes that were previously identified in the honeybee genome, and three novel putative CP genes that do not belong to a known CP family. In situ hybridization showed that two of the novel genes were abundantly expressed in the epidermis during adult exoskeleton formation, strongly implicating them as genuine CP genes. Conserved sequence motifs identified the CP genes as members of the CPR, Tweedle, Apidermin, CPF, CPLCP1 and Analogous-to-Peritrophins families. Furthermore, 28 of the 36 muscle-related DEGs were upregulated during the de novo formation of striated fibers attached to the exoskeleton. A search for cis-regulatory motifs in the 5′-untranslated region of the DEGs revealed potential binding sites for known transcription factors. Construction of a regulatory network showed that various upregulated CP- and muscle-related genes (15 and 21 genes, respectively) share common elements, suggesting co-regulation during thoracic exoskeleton formation. Conclusions: These findings help reveal molecular aspects of rigid thoracic exoskeleton formation during the ecdysteroid-coordinated pupal-to-adult molt in the honeybee.

Validation of statistical shape model based reconstruction of the proximal femur - A morphology study

Seventeen bones (sixteen cadaveric bones and one plastic bone) were used to validate a method for reconstructing a surface model of the proximal femur from 2D X-ray radiographs and a statistical shape model that was constructed from thirty training surface models. Unlike previously introduced validation studies, where surface-based distance errors were used to evaluate the reconstruction accuracy, here we propose to use errors measured based on clinically relevant morphometric parameters. For this purpose, a program was developed to robustly extract those morphometric parameters from the thirty training surface models (training population), from the seventeen surface models reconstructed from X-ray radiographs, and from the seventeen ground truth surface models obtained either by a CT-scan reconstruction method or by a laser-scan reconstruction method. A statistical analysis was then performed to classify the seventeen test bones into two categories: normal cases and outliers. This classification step depends on the measured parameters of the particular test bone. In case all parameters of a test bone were covered by the training population's parameter ranges, this bone is classified as normal bone, otherwise as outlier bone. Our experimental results showed that statistically there was no significant difference between the morphometric parameters extracted from the reconstructed surface models of the normal cases and those extracted from the reconstructed surface models of the outliers. Therefore, our statistical shape model based reconstruction technique can be used to reconstruct not only the surface model of a normal bone but also that of an outlier bone.

A prediction model for assessing residential radon concentration in Switzerland

Indoor radon is regularly measured in Switzerland. However, a nationwide model to predict residential radon levels has not been developed. The aim of this study was to develop a prediction model to assess indoor radon concentrations in Switzerland. The model was based on 44,631 measurements from the nationwide Swiss radon database collected between 1994 and 2004. Of these, 80% randomly selected measurements were used for model development and the remaining 20% for an independent model validation. A multivariable log-linear regression model was fitted and relevant predictors selected according to evidence from the literature, the adjusted R², the Akaike's information criterion (AIC), and the Bayesian information criterion (BIC). The prediction model was evaluated by calculating Spearman rank correlation between measured and predicted values. Additionally, the predicted values were categorised into three categories (50th, 50th-90th and 90th percentile) and compared with measured categories using a weighted Kappa statistic. The most relevant predictors for indoor radon levels were tectonic units and year of construction of the building, followed by soil texture, degree of urbanisation, floor of the building where the measurement was taken and housing type (P-values <0.001 for all). Mean predicted radon values (geometric mean) were 66 Bq/m³ (interquartile range 40-111 Bq/m³) in the lowest exposure category, 126 Bq/m³ (69-215 Bq/m³) in the medium category, and 219 Bq/m³ (108-427 Bq/m³) in the highest category. Spearman correlation between predictions and measurements was 0.45 (95%-CI: 0.44; 0.46) for the development dataset and 0.44 (95%-CI: 0.42; 0.46) for the validation dataset. Kappa coefficients were 0.31 for the development and 0.30 for the validation dataset, respectively. The model explained 20% overall variability (adjusted R²). In conclusion, this residential radon prediction model, based on a large number of measurements, was demonstrated to be robust through validation with an independent dataset. The model is appropriate for predicting radon level exposure of the Swiss population in epidemiological research. Nevertheless, some exposure misclassification and regression to the mean is unavoidable and should be taken into account in future applications of the model.

Discrete element methods for asphalt concrete : development and application of user-defined microstructural models and a viscoelastic micromechanical model

As an important Civil Engineering material, asphalt concrete (AC) is commonly used to build road surfaces, airports, and parking lots. With traditional laboratory tests and theoretical equations, it is a challenge to fully understand such a random composite material. Based on the discrete element method (DEM), this research seeks to develop and implement computer models as research approaches for improving understandings of AC microstructure-based mechanics. In this research, three categories of approaches were developed or employed to simulate microstructures of AC materials, namely the randomly-generated models, the idealized models, and image-based models. The image-based models were recommended for accurately predicting AC performance, while the other models were recommended as research tools to obtain deep insight into the AC microstructure-based mechanics. A viscoelastic micromechanical model was developed to capture viscoelastic interactions within the AC microstructure. Four types of constitutive models were built to address the four categories of interactions within an AC specimen. Each of the constitutive models consists of three parts which represent three different interaction behaviors: a stiffness model (force-displace relation), a bonding model (shear and tensile strengths), and a slip model (frictional property). Three techniques were developed to reduce the computational time for AC viscoelastic simulations. It was found that the computational time was significantly reduced to days or hours from years or months for typical three-dimensional models. Dynamic modulus and creep stiffness tests were simulated and methodologies were developed to determine the viscoelastic parameters. It was found that the DE models could successfully predict dynamic modulus, phase angles, and creep stiffness in a wide range of frequencies, temperatures, and time spans. Mineral aggregate morphology characteristics (sphericity, orientation, and angularity) were studied to investigate their impacts on AC creep stiffness. It was found that aggregate characteristics significantly impact creep stiffness. Pavement responses and pavement-vehicle interactions were investigated by simulating pavement sections under a rolling wheel. It was found that wheel acceleration, steadily moving, and deceleration significantly impact contact forces. Additionally, summary and recommendations were provided in the last chapter and part of computer programming codes wree provided in the appendixes.

Stratification of high-risk prostate cancer into prognostic categories: a European multi-institutional study

BACKGROUND High-risk prostate cancer (PCa) is an extremely heterogeneous disease. A clear definition of prognostic subgroups is mandatory. OBJECTIVE To develop a pretreatment prognostic model for PCa-specific survival (PCSS) in high-risk PCa based on combinations of unfavorable risk factors. DESIGN, SETTING, AND PARTICIPANTS We conducted a retrospective multicenter cohort study including 1360 consecutive patients with high-risk PCa treated at eight European high-volume centers. INTERVENTION Retropubic radical prostatectomy with pelvic lymphadenectomy. OUTCOME MEASUREMENTS AND STATISTICAL ANALYSIS Two Cox multivariable regression models were constructed to predict PCSS as a function of dichotomization of clinical stage (< cT3 vs cT3-4), Gleason score (GS) (2-7 vs 8-10), and prostate-specific antigen (PSA; ≤ 20 ng/ml vs > 20 ng/ml). The first "extended" model includes all seven possible combinations; the second "simplified" model includes three subgroups: a good prognosis subgroup (one single high-risk factor); an intermediate prognosis subgroup (PSA >20 ng/ml and stage cT3-4); and a poor prognosis subgroup (GS 8-10 in combination with at least one other high-risk factor). The predictive accuracy of the models was summarized and compared. Survival estimates and clinical and pathologic outcomes were compared between the three subgroups. RESULTS AND LIMITATIONS The simplified model yielded an R(2) of 33% with a 5-yr area under the curve (AUC) of 0.70 with no significant loss of predictive accuracy compared with the extended model (R(2): 34%; AUC: 0.71). The 5- and 10-yr PCSS rates were 98.7% and 95.4%, 96.5% and 88.3%, 88.8% and 79.7%, for the good, intermediate, and poor prognosis subgroups, respectively (p = 0.0003). Overall survival, clinical progression-free survival, and histopathologic outcomes significantly worsened in a stepwise fashion from the good to the poor prognosis subgroups. Limitations of the study are the retrospective design and the long study period. CONCLUSIONS This study presents an intuitive and easy-to-use stratification of high-risk PCa into three prognostic subgroups. The model is useful for counseling and decision making in the pretreatment setting.

A clinical prediction model to identify patients at high risk of death in the emergency department.

PURPOSE Rapid assessment and intervention is important for the prognosis of acutely ill patients admitted to the emergency department (ED). The aim of this study was to prospectively develop and validate a model predicting the risk of in-hospital death based on all available information available at the time of ED admission and to compare its discriminative performance with a non-systematic risk estimate by the triaging first health-care provider. METHODS Prospective cohort analysis based on a multivariable logistic regression for the probability of death. RESULTS A total of 8,607 consecutive admissions of 7,680 patients admitted to the ED of a tertiary care hospital were analysed. Most frequent APACHE II diagnostic categories at the time of admission were neurological (2,052, 24 %), trauma (1,522, 18 %), infection categories [1,328, 15 %; including sepsis (357, 4.1 %), severe sepsis (249, 2.9 %), septic shock (27, 0.3 %)], cardiovascular (1,022, 12 %), gastrointestinal (848, 10 %) and respiratory (449, 5 %). The predictors of the final model were age, prolonged capillary refill time, blood pressure, mechanical ventilation, oxygen saturation index, Glasgow coma score and APACHE II diagnostic category. The model showed good discriminative ability, with an area under the receiver operating characteristic curve of 0.92 and good internal validity. The model performed significantly better than non-systematic triaging of the patient. CONCLUSIONS The use of the prediction model can facilitate the identification of ED patients with higher mortality risk. The model performs better than a non-systematic assessment and may facilitate more rapid identification and commencement of treatment of patients at risk of an unfavourable outcome.

A Bayesian approach to estimating the regression coefficients of a multinomial logit model

A Bayesian approach to estimation of the regression coefficients of a multinominal logit model with ordinal scale response categories is presented. A Monte Carlo method is used to construct the posterior distribution of the link function. The link function is treated as an arbitrary scalar function. Then the Gauss-Markov theorem is used to determine a function of the link which produces a random vector of coefficients. The posterior distribution of the random vector of coefficients is used to estimate the regression coefficients. The method described is referred to as a Bayesian generalized least square (BGLS) analysis. Two cases involving multinominal logit models are described. Case I involves a cumulative logit model and Case II involves a proportional-odds model. All inferences about the coefficients for both cases are described in terms of the posterior distribution of the regression coefficients. The results from the BGLS method are compared to maximum likelihood estimates of the regression coefficients. The BGLS method avoids the nonlinear problems encountered when estimating the regression coefficients of a generalized linear model. The method is not complex or computationally intensive. The BGLS method offers several advantages over Bayesian approaches. ^

Hispanic incorporation and access to health care in Houston and Harris County, Texas: Adopting an Hispanic perspective to the Aday and Andersen model

This study examines Hispanic levels of incorporation and access to health care. Applying the Aday and Andersen framework for the study of access, the study examined the relationship between two levels of Hispanic incorporation into U.S. society, i.e., mainstream versus ethnic, and potential and realized measures of access to health care. Data for the study were drawn from a 1992 telephone survey of 600 randomly selected Hispanics in Houston and Harris County.^ The hypotheses tested were: (1) Hispanics who are incorporated into mainstream society are more likely to have better potential and realized access to health care than those who are incorporated into ethnic-group enclaves regardless of their socioeconomic status (SES), health status and health needs, and (2) there is no interaction between the levels of incorporation (mainstream or ethnic) and SES, health status, and health needs in predicting potential and realized access.^ The data analysis supported Hypothesis One for the two measures of potential access. The results of bivariate and multiple logistic regression analyses indicated that for Hispanics in Houston and Harris County, being in the "mainstream" incorporation category increased their potential access to care, having "health insurance" and a "regular place of care". For the selected measure of realized access, having a "regular check-up", the analysis did not demonstrate statistically significant differences in having a regular check-up among Hispanics incorporated in the ethnic or mainstream incorporation categories.^ Hypothesis Two, that there is no interaction between the levels of incorporation and socioeconomic characteristics, health status, and health needs in predicting potential and realized access among Hispanics was supported by the data. The results of the logistic regression analysis showed that, after adjusting for socioeconomic status, health status, and health needs, the association between "level of incorporation" and the two measures of potential access ("health insurance" and having a "usual place of care") was not modified by the control variables nor by their interaction with level of incorporation. That is, the effect of incorporation on Hispanics' health insurance coverage, and having a usual place of care, was homogenous across Hispanics with different SES and health status.^ The main research implication of this dissertation is the employment of a theoretical framework for the assessment of cultural factors essential to research on migrating heterogeneous subpopulations. It also provided strategies to solve practical and methodological difficulties in the secondary analyses of data on these populations. ^

UNDERSTANDING INTERRUPTIONS IN HEALTHCARE: DEVELOPING A MODEL

Developing a Model Interruption is a known human factor that contributes to errors and catastrophic events in healthcare as well as other high-risk industries. The landmark Institute of Medicine (IOM) report, To Err is Human, brought attention to the significance of preventable errors in medicine and suggested that interruptions could be a contributing factor. Previous studies of interruptions in healthcare did not offer a conceptual model by which to study interruptions. As a result of the serious consequences of interruptions investigated in other high-risk industries, there is a need to develop a model to describe, understand, explain, and predict interruptions and their consequences in healthcare. Therefore, the purpose of this study was to develop a model grounded in the literature and to use the model to describe and explain interruptions in healthcare. Specifically, this model would be used to describe and explain interruptions occurring in a Level One Trauma Center. A trauma center was chosen because this environment is characterized as intense, unpredictable, and interrupt-driven. The first step in developing the model began with a review of the literature which revealed that the concept interruption did not have a consistent definition in either the healthcare or non-healthcare literature. Walker and Avant’s method of concept analysis was used to clarify and define the concept. The analysis led to the identification of five defining attributes which include (1) a human experience, (2) an intrusion of a secondary, unplanned, and unexpected task, (3) discontinuity, (4) externally or internally initiated, and (5) situated within a context. However, before an interruption could commence, five conditions known as antecedents must occur. For an interruption to take place (1) an intent to interrupt is formed by the initiator, (2) a physical signal must pass a threshold test of detection by the recipient, (3) the sensory system of the recipient is stimulated to respond to the initiator, (4) an interruption task is presented to recipient, and (5) the interruption task is either accepted or rejected by v the recipient. An interruption was determined to be quantifiable by (1) the frequency of occurrence of an interruption, (2) the number of times the primary task has been suspended to perform an interrupting task, (3) the length of time the primary task has been suspended, and (4) the frequency of returning to the primary task or not returning to the primary task. As a result of the concept analysis, a definition of an interruption was derived from the literature. An interruption is defined as a break in the performance of a human activity initiated internal or external to the recipient and occurring within the context of a setting or location. This break results in the suspension of the initial task by initiating the performance of an unplanned task with the assumption that the initial task will be resumed. The definition is inclusive of all the defining attributes of an interruption. This is a standard definition that can be used by the healthcare industry. From the definition, a visual model of an interruption was developed. The model was used to describe and explain the interruptions recorded for an instrumental case study of physicians and registered nurses (RNs) working in a Level One Trauma Center. Five physicians were observed for a total of 29 hours, 31 minutes. Eight registered nurses were observed for a total of 40 hours 9 minutes. Observations were made on either the 0700–1500 or the 1500-2300 shift using the shadowing technique. Observations were recorded in the field note format. The field notes were analyzed by a hybrid method of categorizing activities and interruptions. The method was developed by using both a deductive a priori classification framework and by the inductive process utilizing line-byline coding and constant comparison as stated in Grounded Theory. The following categories were identified as relative to this study: Intended Recipient - the person to be interrupted Unintended Recipient - not the intended recipient of an interruption; i.e., receiving a phone call that was incorrectly dialed Indirect Recipient – the incidental recipient of an interruption; i.e., talking with another, thereby suspending the original activity Recipient Blocked – the intended recipient does not accept the interruption Recipient Delayed – the intended recipient postpones an interruption Self-interruption – a person, independent of another person, suspends one activity to perform another; i.e., while walking, stops abruptly and talks to another person Distraction – briefly disengaging from a task Organizational Design – the physical layout of the workspace that causes a disruption in workflow Artifacts Not Available – supplies and equipment that are not available in the workspace causing a disruption in workflow Initiator – a person who initiates an interruption Interruption by Organizational Design and Artifacts Not Available were identified as two new categories of interruption. These categories had not previously been cited in the literature. Analysis of the observations indicated that physicians were found to perform slightly fewer activities per hour when compared to RNs. This variance may be attributed to differing roles and responsibilities. Physicians were found to have more activities interrupted when compared to RNs. However, RNs experienced more interruptions per hour. Other people were determined to be the most commonly used medium through which to deliver an interruption. Additional mediums used to deliver an interruption vii included the telephone, pager, and one’s self. Both physicians and RNs were observed to resume an original interrupted activity more often than not. In most interruptions, both physicians and RNs performed only one or two interrupting activities before returning to the original interrupted activity. In conclusion the model was found to explain all interruptions observed during the study. However, the model will require an even more comprehensive study in order to establish its predictive value.

A Model for Proactivity in Mobile, Context-aware Recommender Systems

A proactive recommender system pushes recommendations to the user when the current situation seems appropriate, without explicit user request. This is conceivable in mobile scenarios such as restaurant or gas station recommendations. In this paper, we present a model for proactivity in mobile recommender systems. The model relies on domain-dependent context modeling in several categories. The recommendation process is divided into two phases to first analyze the current situation and then examine the suitability of particular items. We have implemented a prototype gas station recommender and conducted a survey for evaluation. Results showed good correlation of the output of our system with the assessment of users regarding the question when to generate recommendations.