Investigando o passado para planear o futuro: uma análise bibliométrica das publicações dos Açores em revistas do SCI entre 1974-2012

Jornadas "Ciência nos Açores – que futuro? Tema Ciências Naturais e Ambiente", Ponta Delgada, 7-8 de Junho de 2013.

Occupational exposure to Aflatoxin B1 in swine production and possible contamination sources

Although the adverse health consequences of ingestion of food contaminated with aflatoxin B1 (AFB1) are known, relatively few studies are available on the adverse effects of exposure in occupational settings. Taking this into consideration, our study was developed aiming to elucidate the possible effects of occupational exposure to AFB1 in Portuguese swine production facilities using a specific biomarker to assess exposure to AFB1. In total, 28 workers participated in this study, providing blood samples, and a control group (n  = 30) was composed of subjects without any type of agricultural activity. Fungal contamination was also studied by conventional methods through air, surfaces, and new and used floor coverage. Twenty-one workers (75%) showed detectable levels of AFB1 with values ranging from <1 ng/ml to 8.94 ng/ml and with a mean value of 1.91 ± 1.68 ng/ml. In the control group, the AFB1 values were all below 1 ng/ml. Twelve different Aspergillus species were identified. Aspergillus versicolor presented the highest airborne spore counts (3210 CFU/m3) and was also detected in higher values in surfaces (>300 CFU/cm2). Data indicate that exposure to AFB1 occurs in swine barns, and this site serves as a contamination source in an occupational setting.

Indústria de curtumes: energia e desenvolvimento

Este trabalho, numa fase inicial, teve como pilar fundamental, a optimização energética de uma indústria de curtumes, mais concretamente da empresa Dias Ruivo. Pretendia-se avaliar todos os gastos de energia apresentados pela empresa, com o intuito de verificar se haveria possibilidade de diminuir a factura da electricidade e os custos associados, mantendo a qualidade dos produtos finais. Ainda se pretendia averiguar a viabilidade de reutilização de alguns desperdícios permitindo diminuir a quantidade de energia necessária para o aquecimento de algumas correntes de água. Por último, após os dados recolhidos, sugeriram-se medidas de melhoria, que possibilitariam que a empresa utilizasse os seus recursos de forma optimizada, não apresentando assim gastos desnecessários. Começando pela análise da factura de electricidade, verificou-se que nos anos de 2010 e 2011, a empresa apresentou um consumo de energia de 120 e 128 tep/ano, respectivamente. Determinaram-se igualmente os respectivos indicadores constatando-se que o valor médio para a intensidade carbónica foi de 900 e 1148 kg CO2/tep e para o consumo específico obteve-se 0,131 e 0,152 kgep/ft2, respectivamente. Numa segunda fase, tendo em conta a constante aposta da empresa na inovação de artigos em couro e o facto de estar envolvida num projecto mobilizador de ciência e tecnologia com esse fim, o trabalho incidiu no desenvolvimento de um produto inovador designado por floater que deve ser macio e mais leve que os produtos normais. Com base na aplicação de proteases apropriadas, desenvolveu-se um produto que, ainda na fase de ensaios de bancada e piloto, satisfaz no que respeita à macieza e leveza, sendo que se conseguiu um valor de 67 g/ft2 contra um valor de 75g/ft2 do padrão.

Does diaphragmatic breathing technique really improve its range of motion? An objective assessment

Purpose - To verify the results of a diaphragmatic breathing technique (DBT) on diaphragmatic range of motion in healthy subjects. Methods - A total of 51 healthy subjects (10 male; 41 female), mean age 20 years old and a body mass index (BMI) ranging from 15.6 to 34.9 kg/m2, were enrolled in this study. Diaphragmatic range of motion was assessed by M-mode ultrasound imaging. Measurements were made before and after the DBT implementation in a standard protocol, based on 3 seconds of inspiration starting from a maximum expiration. Differences between assessments were analyzed by descriptive statistics and t-test (p < 0.05). Results - Mean value range of motion before DBT was 55.3 ± 13.4 mm and after DBT was 63.8 ± 13.2 mm showing a significant improvement of 8.5 ± 14.7 mm (p < 0.001). A strong correlation between the slope and the range of motion was found (r = 0.71, p < 0.001). Conclusions - Based on ultrasound measurements, it has been proved that DBT really contributes to a higher diaphragmatic range of motion. Future studies are needed in order to understand the influence of protocol parameters (e.g. inspiration time). Clinical implications - In the contest of evidence-based practice in physiotherapy, it has been showed by objective measurements that DBT improves the diaphragm range of motion, translating into a more efficient ventilatory function and thus can be used in clinical setting. To our knowledge this is the first study to assess the effects of DBT on range of motion of diaphragm muscle with ultrasound imaging.

Índice de distorção, parâmetros celulares e composição química de cordierite de granitóides e corneanas da região de Tondela - Oliveira do Hospital (Portugal Central)

Memórias e Noticias, PubI. Mus. Lab. Mineral. Geol., Univ. Coimbra, n.O 116, 1993

Efeito da exposição às temperaturas extremas na população portuguesa - um contributo da epidemiologia

Backgroud: O International Panel on Climate Change prevê que o aumento da temperatura média global, até ao ano de 2100, varie entre 1,4 e 5,8ºC desconhecendo-se a evolução da adaptação da população a esta subida da temperatura. Em Portugal morre-se mais no Inverno que no Verão. Mas existem evidências de repercussões na mortalidade atribuíveis ao calor extremo. Este estudo procura conhecer os grupos etários e/ou populacionais que parecem revelar vulnerabilidade acrescida à exposição a temperaturas extremas e identificar indicadores de saúde apropriados para revelar esses mesmos efeitos. Métodos: Foram analisados dados de internamentos hospitalar e mortalidade por doenças cardiovasculares, respiratórias, renais, efeitos directos do frio e do calor, na população com 75 e mais anos de idade, nos distritos de Beja, Bragança e Faro, nos meses de Janeiro e Junho. Para os dados de morbilidade o período de análise foi 2002 a 2005 e para os de mortalidade de 2002 a 2004. Os dados meteorológicos analisados corresponderam aos valores da temperatura máxima e percentis da temperatura máxima, nos meses de Janeiro (P10) e Junho (P90). Os excessos de internamentos hospitalares, definidos como os dias em que ocorreram internamentos acima do valor da média mais 2 desvio padrão, foram relacionados com a distribuição das temperaturas extremas (frias abaixo do P10, quentes acima do P90.Os dias com óbitos acima do valor da média foram relacionados com a distribuição das temperaturas extremas (frias abaixo do P10, quentes acima do P90). Os indicadores propostos foram baseados em Odds Ratios e intervalos de confiança que sugeriam as estimativas mais precisas. Resultados: O grupo que revelou maior vulnerabilidade às temperaturas extremas foi o grupo dos 75 e mais anos, com doenças cardiovasculares quando exposto a temperaturas extremas, nos 3 distritos observados.O nº de dias de excesso de óbitos por doenças cardiovasculares relacionados com temperaturas extremas foi o mais elevado comparado com as restantes causas de morte. O grupo etário dos 75 e mais anos com de doenças respiratórias também é vulnerável, às temperaturas extremas frias, nos 3 distritos. Verificaram-se dias de excessos de internamentos hospitalares e óbitos por esta causa de morte, relacionados com a exposição às temperaturas extremas frias. Em Junho, não se verificou excesso de mortalidade associado à exposição a temperaturas extremas por esta causa, em qualquer dos distritos analisados. Apenas se verificou a associação entre os dias de ocorrência de internamentos hospitalares por doenças renais e o calor extremo, em Bragança. Conclusões: Foram encontradas associações estatísticas significativas entre dias de excesso de ocorrência de internamentos hospitalares ou óbitos por causa e exposição a temperaturas extremas frias e quentes possibilitando a identificação de um conjunto de indicadores de saúde ambiental apropriados para monitorizar a evolução dos padrões de morbilidade, mortalidade e susceptibilidade das populações ao longo do tempo.-------------------- Backgroud: International Panel on Climate Change estimates that the rise of mean global temperature varies between 1,4 e 5,8ºC until 2100, with unknowing evolution adaptation of populations. In Portugal we die more in Winter than in Summer time. But there are several evidences of mortality attributable to extreme eat. The proposal of this study is to know the age and/or populations groups that reveal more vulnerability to exposure to extreme temperature and identifying proper health indicators to reveal those effects. Methods: Data from hospital admissions and mortality caused by cardiovascular, respiratory, renal diseases and direct effects from direct exposure to extreme cold and heat, in population with 75 and more years, in Beja, Bragança and Faro districts, during January and June, were analysed. Analysis period for morbidity data was from 2002 to 2005 and form mortality was 2002 to 2004. Meteorological data analysed were maximum temperature and percentile of maximum temperature, from January (P10) and June (P90. Relationship between excess of hospital admission, defined as the days that occurred hospital admissions above mean value more 2 standards desviation and distribution of extreme temperatures were established (cold under P10 and heat above P90. Proposal indicators were based on Odds Ratios and confidence intervals, suggesting the most precises estimatives. Results: The most vulnerable group to extreme temperature were people with 75 or more years older with cardiovascular diseases, observed in the 3 districts. Number of days caused by excess cardiovascular mortality and extreme temperature were the most number of days between the other causes. The group with 75 or more years old with respiratory diseases is vulnerable too, especially to cold extreme temperature, in all the 3 districts. There were excess of days of hospital admissions and days with deaths, for this cause relating to extreme cold temperature. In June, does not funded excess of mortality associated to extreme temperature by this cause in any district of the in observation. Just was found relationship between days of hospital admissions caused by renal diseases in Bragança in days with extreme heat. Conclusions: Were found statistically significant associations between days of excess of hospital admissions or deaths and exposure to extreme cold and heat temperatures giving the possibility of identifying a core of environmental indicators proper to monitoring patterns and trends evolutions on morbidity, mortality and susceptibly of populations for a long time.

Entamoeba histolytica: fecal antigen capture immunoassay for the diagnosis of enteric amebiasis by a monoclonal antibody

Amebiasis continues to be of epidemiological importance in underdeveloped countries. Clinical diagnosis and epidemiological setting in a region are based on the fecal microscopic identification of cysts or trophozoites. This procedure requires well trained personnel, is laborious, of low sensitivity and frequently yields false-positives results. The present study was designed to develop an immuno-enzymatic fecal 96 kDa antigen capture test (COPROELISA-Eh) more sensitive and specific than microscopic diagnosis of amebiasis. Triplicates of 177 stool samples processed by the formol-ether concentration method, were defined as positive or negative by three experienced microscopic observers. Another aliquot was submitted to the antigen capture test by a monoclonal antibody against a specific membrane antigen of pathogenic strains of Entamoeba histolytica. Optical densities were interpreted as positive when they exceeded the mean value of negative samples plus two standard deviations. COPROELISA-Eh showed a 94.4% sensitivity, 98.3% specificity, 96.2% positive predictive value and 97.6% negative predictive value for the detection of E. histolytica in feces. COPROELISA-Eh is more sensitive and specific than microscopic examination, does not require specially trained personnel and allows the simultaneous processing of a large number of samples.

Estudo da exposição profissional a formaldeído em laboratórios hospitalares de anatomia patológica

RESUMO - A exposição a formaldeído é reconhecidamente um dos mais importantes factores de risco presente nos laboratórios hospitalares de anatomia patológica. Neste contexto ocupacional, o formaldeído é utilizado em solução, designada comummente por formol. Trata-se de uma solução comercial de formaldeído, normalmente diluída a 10%, sendo pouco onerosa e, por esse motivo, a eleita para os trabalhos de rotina em anatomia patológica. A solução é utilizada como fixador e conservante do material biológico, pelo que as peças anatómicas a serem processadas são previamente impregnadas. No que concerne aos efeitos para a saúde do formaldeído, os efeitos locais parecem apresentar um papel mais importante comparativamente com os efeitos sistémicos, devido à sua reactividade e rápido metabolismo nas células da pele, tracto gastrointestinal e pulmões. Da mesma forma, a localização das lesões correspondem principalmente às zonas expostas às doses mais elevadas deste agente químico, ou seja, o desenvolvimento dos efeitos tóxicos dependerá mais da intensidade da dose externa do que da duração da exposição. O efeito do formaldeído no organismo humano mais facilmente detectável é a acção irritante, transitória e reversível sobre as mucosas dos olhos e aparelho respiratório superior (naso e orofaringe), o que acontece em geral para exposições frequentes e superiores a 1 ppm. Doses elevadas são citotóxicas e podem conduzir a degenerescência e necrose das mucosas e epitélios. No que concerne aos efeitos cancerígenos, a primeira avaliação efectuada pela International Agency for Research on Cancer data de 1981, actualizada em 1982, 1987, 1995 e 2004, considerando-o como um agente cancerígeno do grupo 2A (provavelmente carcinogénico). No entanto, a mais recente avaliação, em 2006, considera o formaldeído no Grupo 1 (agente carcinogénico) com base na evidência de que a exposição a este agente é susceptível de causar cancro nasofaríngeo em humanos. Constituiu objectivo principal deste estudo caracterizar a exposição profissional a formaldeído nos laboratórios hospitalares de anatomia patológica Portugueses. Pretendeu-se, ainda, descrever os fenómenos ambientais da contaminação ambiental por formaldeído e explorar eventuais associações entre variáveis. Considerou-se uma amostra de 10 laboratórios hospitalares de anatomia patológica, avaliada a exposição dos três grupos profissionais por comparação com os dois referenciais de exposição e, ainda, conhecidos os valores de concentração máxima em 83 actividades. Foram aplicados simultaneamente dois métodos distintos de avaliação ambiental: um dos métodos (Método 1) fez uso de um equipamento de leitura directa com o princípio de medição por Photo Ionization Detection, com uma lâmpada de 11,7 eV e, simultaneamente, realizou-se o registo da actividade. Este método disponibilizou dados para o referencial de exposição da concentração máxima; o outro método (Método 2) traduziu-se na aplicação do método NIOSH 2541, implicando o uso de bombas de amostragem eléctricas de baixo caudal e posterior processamento analítico das amostras por cromatografia gasosa. Este método, por sua vez, facultou dados para o referencial de exposição da concentração média ponderada. As estratégias de medição de cada um dos métodos e a definição dos grupos de exposição existentes neste contexto ocupacional, designadamente os Técnicos de Anatomia Patológica, os Médicos Anatomo-Patologistas e os Auxiliares, foram possíveis através da informação disponibilizada pelas técnicas de observação da actividade da análise (ergonómica) do trabalho. Estudaram-se diversas variáveis independentes, nomeadamente a temperatura ambiente e a humidade relativa, a solução de formaldeído utilizada, as condições de ventilação existentes e o número médio de peças processadas por dia em cada laboratório. Para a recolha de informação sobre estas variáveis foi preenchida, durante a permanência nos laboratórios estudados, uma Grelha de Observação e Registo. Como variáveis dependentes seleccionaram-se três indicadores de contaminação ambiental, designadamente o valor médio das concentrações superiores a 0,3 ppm em cada laboratório, a Concentração Média Ponderada obtida para cada grupo de exposição e o Índice do Tempo de Regeneração de cada laboratório. Os indicadores foram calculados e definidos através dos dados obtidos pelos dois métodos de avaliação ambiental aplicados. Baseada no delineado pela Universidade de Queensland, foi ainda aplicada uma metodologia de avaliação do risco de cancro nasofaríngeo nas 83 actividades estudadas de modo a definir níveis semi-quantitativos de estimação do risco. Para o nível de Gravidade considerou-se a informação disponível em literatura científica que define eventos biológicos adversos, relacionados com o modo de acção do agente químico e os associa com concentrações ambientais de formaldeído. Para o nível da Probabilidade utilizou-se a informação disponibilizada pela análise (ergonómica) de trabalho que permitiu conhecer a frequência de realização de cada uma das actividades estudadas. A aplicação simultânea dos dois métodos de avaliação ambiental resultou na obtenção de resultados distintos, mas não contraditórios, no que concerne à avaliação da exposição profissional a formaldeído. Para as actividades estudadas (n=83) verificou-se que cerca de 93% dos valores são superiores ao valor limite de exposição definido para a concentração máxima (VLE-CM=0,3 ppm). O “exame macroscópico” foi a actividade mais estudada e onde se verificou a maior prevalência de resultados superiores ao valor limite (92,8%). O valor médio mais elevado da concentração máxima (2,04 ppm) verificou-se no grupo de exposição dos Técnicos de Anatomia Patológica. No entanto, a maior amplitude de resultados observou-se no grupo dos Médicos Anatomo-Patologistas (0,21 ppm a 5,02 ppm). No que respeita ao referencial da Concentração Média Ponderada, todos os valores obtidos nos 10 laboratórios estudados para os três grupos de exposição foram inferiores ao valor limite de exposição definido pela Occupational Safety and Health Administration (TLV-TWA=0,75 ppm). Verificou-se associação estatisticamente significativa entre o número médio de peças processadas por laboratório e dois dos três indicadores de contaminação ambiental utilizados, designadamente o valor médio das concentrações superiores a 0,3 ppm (p=0,009) e o Índice do Tempo de Regeneração (p=0,001). Relativamente à temperatura ambiente não se observou associação estatisticamente significativa com nenhum dos indicadores de contaminação ambiental utilizados. A humidade relativa apresentou uma associação estatisticamente significativa apenas com o indicador de contaminação ambiental da Concentração Média Ponderada de dois grupos de exposição, nomeadamente com os Médicos Anatomo-Patologistas (p=0,02) e os Técnicos de Anatomia Patológica (p=0,04). A aplicação da metodologia de avaliação do risco nas 83 actividades estudadas permitiu verificar que, em cerca de dois terços (35%), o risco foi classificado como (pelo menos) elevado e, ainda, constatar que 70% dos laboratórios apresentou pelo menos 1 actividade com a classificação de risco elevado. Da aplicação dos dois métodos de avaliação ambiental e das informações obtidas para os dois referenciais de exposição pode concluir-se que o referencial mais adequado é a Concentração Máxima por estar associado ao modo de actuação do agente químico. Acresce, ainda, que um método de avaliação ambiental, como o Método 1, que permite o estudo das concentrações de formaldeído e simultaneamente a realização do registo da actividade, disponibiliza informações pertinentes para a intervenção preventiva da exposição por permitir identificar as actividades com a exposição mais elevada, bem como as variáveis que a condicionam. As peças anatómicas apresentaram-se como a principal fonte de contaminação ambiental por formaldeído neste contexto ocupacional. Aspecto de particular interesse, na medida que a actividade desenvolvida neste contexto ocupacional e, em particular na sala de entradas, é centrada no processamento das peças anatómicas. Dado não se perspectivar a curto prazo a eliminação do formaldeído, devido ao grande número de actividades que envolvem ainda a utilização da sua solução comercial (formol), pode concluir-se que a exposição a este agente neste contexto ocupacional específico é preocupante, carecendo de uma intervenção rápida com o objectivo de minimizar a exposição e prevenir os potenciais efeitos para a saúde dos trabalhadores expostos. ---------------- ABSTRACT - Exposure to formaldehyde is recognized as one of the most important risk factors present in anatomy and pathology laboratories from hospital settings. In this occupational setting, formaldehyde is used in solution, typically diluted to 10%, and is an inexpensive product. Because of that, is used in routine work in anatomy and pathology laboratories. The solution is applied as a fixative and preservative of biological material. Regarding formaldehyde health effects, local effects appear to have a more important role compared with systemic effects, due to his reactivity and rapid metabolism in skin, gastrointestinal tract and lungs cells. Likewise, lesions location correspond mainly to areas exposed to higher doses and toxic effects development depend more on external dose intensity than exposure duration. Human body formaldehyde effect more easily detectable is the irritating action, transient and reversible on eyes and upper respiratory tract (nasal and throat) membranes, which happen in general for frequent exposure to concentrations higher than 1 ppm. High doses are cytotoxic and can lead to degeneration, and also to mucous membranes and epithelia necrosis. With regard to carcinogenic effects, first assessment performed by International Agency for Research on Cancer in 1981, updated in 1982, 1987, 1995 and 2004, classified formaldehyde in Group 2A (probably carcinogenic). However, most recent evaluation in 2006, classifies formaldehyde carcinogenic (Group 1), based on evidence that exposure to this agent is likely to cause nasopharyngeal cancer in humans. This study principal objective was to characterize occupational exposure to formaldehyde in anatomy and pathology hospital laboratories, as well to describe formaldehyde environmental contamination phenomena and explore possible associations between variables. It was considered a sample of 10 hospital pathology laboratories, assessed exposure of three professional groups for comparison with two exposure metrics, and also knows ceiling concentrations in 83 activities. Were applied, simultaneously, two different environmental assessment methods: one method (Method 1) using direct reading equipment that perform measure by Photo Ionization Detection, with 11,7 eV lamps and, simultaneously, make activity description and film. This method provided data for ceiling concentrations for each activity study (TLV-C). In the other applied method (Method 2), air sampling and formaldehyde analysis were performed according to NIOSH method (2541). This method provided data average exposure concentration (TLV-TWA). Measuring and sampling strategies of each methods and exposure groups definition (Technicians, Pathologists and Assistants) was possible by information provided by activities (ergonomic) analysis. Several independent variables were studied, including temperature and relative humidity, formaldehyde solution used, ventilation conditions, and also anatomic pieces mean value processed per day in each laboratory. To register information about these variables was completed an Observation and Registration Grid. Three environmental contamination indicators were selected has dependent variables namely: mean value from concentrations exceeding 0,3 ppm in each laboratory, weighted average concentration obtained for each exposure group, as well each laboratory Time Regeneration Index. These indicators were calculated and determined through data obtained by the two environmental assessment methods. Based on Queensland University proposal, was also applied a methodology for assessing nasopharyngeal cancer risk in 83 activities studied in order to obtain risk levels (semi-quantitative estimation). For Severity level was considered available information in scientific literature that defines biological adverse events related to the chemical agent action mode, and associated with environment formaldehyde concentrations. For Probability level was used information provided by (ergonomic) work analysis that helped identifies activity frequency. Environmental assessment methods provide different results, but not contradictory, regarding formaldehyde occupational exposure evaluation. In the studied activities (n=83), about 93% of the values were above exposure limit value set for ceiling concentration in Portugal (VLE-CM = 0,3 ppm). "Macroscopic exam" was the most studied activity, and obtained the higher prevalence of results superior than 0,3 ppm (92,8%). The highest ceiling concentration mean value (2,04 ppm) was obtain in Technicians exposure group, but a result wider range was observed in Pathologists group (0,21 ppm to 5,02 ppm). Concerning Method 2, results from the three exposure groups, were all lower than limit value set by Occupational Safety and Health Administration (TLV-TWA=0,75ppm). There was a statistically significant association between anatomic pieces mean value processed by each laboratory per day, and two of the three environmental contamination indicators used, namely average concentrations exceeding 0,3 ppm (p=0,009) and Time Regeneration Index (p=0,001). Temperature was not statistically associated with any environmental contamination used indicators. Relative humidity had a statistically significant association only with one environmental contamination indicator, namely weighted average concentration, particularly with Pathologists group (p=0,02) and Technicians group (p=0,04). Risk assessment performed in the 83 studied activities showed that around two thirds (35%) were classified as (at least) high, and also noted that 70% of laboratories had at least 1 activity with high risk rating. The two environmental assessment methods application, as well information obtained from two exposure metrics, allowed to conclude that most appropriate exposure metric is ceiling concentration, because is associated with formaldehyde action mode. Moreover, an environmental method, like Method 1, which allows study formaldehyde concentrations and relates them with activity, provides relevant information for preventive information, since identifies the activity with higher exposure, as well variables that promote exposure. Anatomic pieces represent formaldehyde contamination main source in this occupational setting, and this is of particular interest because all activities are focused on anatomic pieces processing. Since there is no prospect, in short term, for formaldehyde use elimination due to large number of activities that still involve solution use, it can be concluded that exposure to this agent, in this particular occupational setting, is preoccupant, requiring an rapid intervention in order to minimize exposure and prevent potential health effects in exposed workers.

Prostatic Artery Embolization in the Treatment of Benign Prostatic Hyperplasia: Short and Medium Follow-Up

To evaluate the short and mid-term results of prostatic artery embolization in patients with benign prostatic embolization. Retrospective study between March 2009 and June 2011 with 103 patients (mean age 66.8 years, 50-85) that met our inclusion criteria with symptomatic benign prostatic hyperplasia. The clinical outcome was evaluated by the International Prostate Symptom Score (IPSS), quality of life (QoL), International Index of Erectile Function, prostate volume (PV), prostate-specific antigen (PSA), peak urinary flow (Q(max)), and post-void residual volume (PVR) measurements at 3 and 6 months, 1 year, 18 months, and 2 years after PAE and comparison with baseline values was made. Technical and clinical successes, as well as poor clinical outcome definitions, were previously defined. In this review, we evaluate the short and mid-term clinical outcomes and morbidity of patients treated only with non-spherical polyvinyl alcohol. Six months after the procedure, the PV decreased about 23%, IPSS changed to a mean value of 11.95 (almost 50% reduction), the QoL improved slightly more than 2 points, the Q(max) changed to a mean value of 12.63mL/s, the PVR underwent a change of almost half of the baseline value, and the PSA decreased about 2.3ng/mL. In the mid-term follow-up and comparing to the baseline values, we still assisted to a reduction in PV, IPSS, QoL, PVR, and PSA, and an increase in Q(max). Prostatic Artery Embolization is a safe procedure with low morbidity that shows good short- and mid-term clinical outcome in our institution.

Experimental characterization of the out-of-plane performance of regular stone masonry walls, including test setups and axial load influence

Stone masonry is one of the oldest and most worldwide used building techniques. Nevertheless, the structural response of masonry structures is complex and the effective knowledge about their mechanical behaviour is still limited. This fact is particularly notorious when dealing with the description of their out-of-plane behaviour under horizontal loadings, as is the case of the earthquake action. In this context, this paper describes an experimental program, conducted in laboratory environment, aiming at characterizing the out-of-plane behaviour of traditional unreinforced stone masonry walls. In the scope of this campaign, six full-scale sacco stone masonry specimens were fully characterised regarding their most important mechanic, geometric and dynamic features and were tested resorting to two different loading techniques under three distinct vertical pre-compression states; three of the specimens were subjected to an out-of-plane surface load by means of a system of airbags and the remaining were subjected to an out-of-plane horizontal line-load at the top. From the experiments it was possible to observe that both test setups were able to globally mobilize the out-of-plane response of the walls, which presented substantial displacement capacity, with ratios of ultimate displacement to the wall thickness ranging between 26 and 45 %, as well as good energy dissipation capacity. Finally, very interesting results were also obtained from a simple analytical model used herein to compute a set of experimental-based ratios, namely between the maximum stability displacement and the wall thickness for which a mean value of about 60 % was found.

O sal na alimentação dos jovens : avaliação e perceção do sal das refeições

RESUMO: Considerando que a pressão arterial elevada constitui um dos maiores fatores de risco para as doenças cardiovasculares, a sua associação ao consumo elevado de sal, e o facto das escolas constituírem ambientes de excelência para a aquisição de bons hábitos alimentes e promoção da saúde, o objetivo deste estudo foi avaliar o conteúdo de sal presente nas refeições escolares e a perceção dos consumidores sobre o sabor salgado. A quantificação de sal foi realizada com um medidor portátil. Para avaliar a perceção dos consumidores foi desenvolvido e aplicado um questionário a alunos das escolas preparatórias e secundárias e aos responsáveis pela preparação e confeção das refeições. Foram analisadas um total de 898 componentes de refeições, incluindo refeições escolares e de restauração padronizada. Em média, as refeições escolares disponibilizam entre 2,83 a 3,82 g de sal por porção servida (p=0,05), o que representa entre duas a cinco vezes mais as necessidades das crianças e jovens. Os componentes das refeições padronizadas apresentam um valor médio de sal que varia entre 0,8 e 2,57 g por porção (p=0,05), o que pode contribuir para um valor total de sal por refeição mais elevado comparativamente com as refeições escolares. O sabor das refeições é percecionado como sendo nem salgado nem insonso para a maioria dos estudantes, o que parece demonstrar habituação à intensidade/ quantidade de sal consumida. Os responsáveis pelas refeições, apesar de apresentarem conhecimentos sobre sal e a necessidade da sua limitação, demonstram barreiras e limitações e perceções à sua redução. A realização de escolhas alimentares saudáveis e adequadas só é possível se suportada por um ambiente facilitador dessas mesmas escolas. O impacto que o consumo de sal tem na saúde, em particular nas doenças crónicas, torna imperativa a implementação de estratégias de redução de sal ao nível da indústria e dos serviços de catering e restauração, em particular direcionadas para o público mais jovem.------------ABSTRACT Considering the fact that high blood pressure is a major rick factor for cardiovascular disease and its association to salt intake and the fact that schools are considered ideal environments to promote health and proper eating habits, the objective of this study was to evaluate the amount of salt in meals served in school canteens and consumers perceptions about salt. Quantification of salt was performed using a portable salt meter - PAL ES2. For food perception we constructed a questionnaire that was applied to students from high schools. A total of 898 food samples were analysed. Bread presents the highest value with a mean of 1.35 (SD=0.12). Salt in soups ranges from 0.72 g/100 g to 0.80 g/100 g (p=0.05) and main courses from 0.71 g/100 to 0.97 g/100g (p=0.05). Salt in school meals is high with a mean value from 2.83 to 3.82 g of salt per meal, which is between 2 and 5 times more than the RDA for children. The components of standardized meals have an average value of salt ranging from 0.8 to 2.57 g per serving, which may contribute to a higher intake of salt per meal compared to school meals. Moreover, a high percentage of students consider meals neither salty nor lacking in salt, which shows they are used to the intensity/amount of salt consumed. Despite the knowledge and perceived necessity about salt reduction, those responsible for cooking and preparing meals, still demonstrate barriers and limitation in doing so. Making healthy choices is only possible if backed up by an environment where such choices are accessible. Therefore salt reduction strategies, aimed at the food industry and catering services should be implemented, with children and young people targeted as a major priority.

Susceptibility of Triatoma sordida Stal, 1859 (Hemiptera: Reduviidae) to alpha-cypermethrin under natural climatic conditions

Abstract:INTRODUCTION:Despite the recommendations by interpretation of resistance ratios obtained in laboratory bioassays, little is known about the actual impact of these results in the effectiveness of vector control activities in the field. In this context, our objective was to determine the mean value of different resistance ratios obtained by laboratory bioassays performed as part of the chemical control strategies of Triatoma sordida in the field.METHODS:Field bioassays were developed in Monte Azul and Coração de Jesus (Southeast, Brazil). In each location, samples were formed with three domestic units treated with alpha-cypermethrin 20.0% (Alfatek (r) 200 SC). One day after spraying, 10 fifth-instar nymphs remained in contact with the surfaces treated (adobe with plaster, adobe without plaster, or wood) with insecticide in plastic cones for 72h. Three cones were exposed inside the intradomicile and the peridomicile. The insects in the control group were exposed to an insecticide-free piece of cardboard. Mortality was measured 72h after removal of the insects from the treated surfaces. The tests were realized in triplicate.RESULTS:Mortality was 100.0% in all locations, except for Monte Azul; Landinho (96.6%) and Coração de Jesus; Barriguda (96.6%).CONCLUSIONS:Although the resistant populations in laboratory tests proved to be susceptible in the field, this observation is not sufficient to suggest that the cut-off points used to justify the resistance ratio should be changed. In this sense, we recommend that laboratory and field bioassays are carried out with a greater number of Triatominae populations to allow more in-depth consideration of the subject.

Nutritional follow-up of critically ill infants receiving short term parenteral nutrition

Few studies have tried to characterize the efficacy of parenteral support of critically ill infants during short period of intensive care. We studied seventeen infants during five days of total parenteral hyperalimentation. Subsequently, according to the clinical conditions, the patients received nutritional support by parenteral, enteral route or both up to the 10th day. Evaluations were performed on the 1st, 5th, and 10th days. These included: clinical data (food intake and anthropometric measurements), haematological data (lymphocyte count), biochemical tests (albumin, transferrin, fibronectin, prealbumin, retinol-binding protein) and hormone assays (cortisol, insulin, glucagon). Anthropometric measurements revealed no significant difference between the first and second evaluations. Serum albumin and transferrin did not change significantly, but mean values of fibronectin (8.9 to 16 mg/dL), prealbumin (7.7 to 18 mg/dL), and retinol-binding protein (2.4 to 3.7 mg/dL) increased significantly (p < 0.05) from the 1st to the 10th day. The hormonal study showed no difference for insulin, glucagon, and cortisol when the three evaluations were compared. The mean value of the glucose/insulin ratio was of 25.7 in the 1st day and 15.5 in the 5th day, revealing a transitory supression of this hormone. Cortisol showed values above normal in the beginning of the study. We conclude that the anthropometric parameters were not useful due to the short time of the study; serum proteins, fibronectin, prealbumin, and retinol-binding protein were very sensitive indicators of nutritional status, and an elevated glucose/insulin ratio, associated with a slight tendency for increased cortisol levels suggest hypercatabolic state. The critically ill patient can benefit from an early metabolic support.

Importance of contact lens power and thickness in oxygen transmissibility

PURPOSE: The aim of this work was to study the central and peripheral thickness of several contact lenses (CL) with different powers and analyze how thickness variation affects CL oxygen transmissibility. METHODS: Four daily disposable and five monthly or biweekly CL were studied. The powers of each CL were: the maximum negative power of each brand; -6.00 D; -3.00 D; zero power (-0.25 D or -0.50 D), +3.00 D and +6.00 D. Central and peripheral thicknesses were measured with an electronic thickness gauge. Each lens was measured five times (central and 3mm paracentral) and the mean value was considered. Using the values of oxygen permeability given by the manufacturers and the measured thicknesses, the variation of oxygen transmissibility with lens power was determined. RESULTS: For monthly or biweekly lenses, central thickness changed between 0.061 ± 0.002 mm and 0.243 ± 0.002 mm, and peripheral thickness varied between 0.084 ± 0.002 mm and 0.231 ± 0.015 mm. Daily disposable lenses showed central values ranging between 0.056 ± 0.0016 mm and 0.205 ± 0.002 mm and peripheral values between 0.108 ± 0.05 and 0.232 ± 0.011 mm. Oxygen transmissibility (in units) of monthly or biweekly CL ranged between 39.4 ± 0.3 and 246.0 ± 14.4 and for daily disposable lenses the values range between 9.5 ± 0.5 and 178.1 ± 5.1. CONCLUSIONS: The central and peripheral thicknesses change significantly when considering the CL power and this has a significant impact on the oxygen transmissibility. Eyecare practitioners must have this fact in account when high power plus or minus lenses are fitted or when continuous wear is considered.

Análise da prevalência da miopia em estudantes universitários

Dissertação de mestrado em Optometria Avançada