A review of length-weight relationships of fishes from Greek marine waters

This paper presents 649 length-weight relationships gathered from literature pertaining to 83 fish species, belonging to 34 families, throughout Greek marine waters. The value of the slope b ranged from 1.667 for Cepola macrophthalma to 3.707 for Mullus barbatus. The mean value of b was 2.989 (SD=0.339) and did not differ significantly from 3(t-test, p<0.05). The median value of b was 3.058 and 50% of the b values ranged between 2.900 and 3.186.

Growth and length-weight parameters of Pacific mackerel (Scomber japonicus) in the Gulf of Guayaquil, Ecuador

The seasonally oscillating growth parameters and length-weight relationships for Scomber japonicus caught in the Gulf of Guayaquil, Ecuador, were determined based on length-frequency data from 1989 to 1996, using the FiSAT software package of Gayanilo et al. (1996). Estimates of growth parameters are in general agreement with previous studies on the same species. Results also imply that the growth of Scomber japonicus slows down during the cold season by approximately 50% with respect to the average growth. The mean value of the power b is significantly larger than 3, indicating that the model of allometric growth should be used for the length-weight relationship and calculation of the condition factor.

Some aspects of reproductive biology of two sciaenids, Otolithes cuvieri Trewavas and Johnius elongatus Mohan: maturation, spawning, sex ratio and fecundity

The gonads of Otolithes cuvieri and Johnius elongatus are described in seven maturity stages. O. Cuvieri spawns once a year from April to September as evidence by ova diameter frequency distribution and GSI values. 50% maturity is attained at 210mm TL in males and 200mm TL in females. Fecundity ranged from 2387 to 104379 with a mean value of 33502. Log-Log relationship between fecundity and total lenght, body weight and ovary weight were determined. An overall sex ratio of 1.54:1.00 was unequal in favour of males. Johnius elongatus spawns twice a year from January-February to Aprile-May and from August to October as evidence by ova diameter frequency distribution and GSI values. 50% maturity is attained at 140-143mm TL in both sexes. Fecundity ranged from 4238 to 167669 with a mean value of 42818. Log-Log relationship between fecundity and total lenght, body weign and ovary weight were determined. An overall sex ratio of 1.00:1.20 was unequal in favour of females.

Fecundity of the sole Euryglossa orientalis (Bl. & Schn.)(family: Soleidae) from Karachi coast

During the present study fecundity of 30 ovaries of Euryglossa orientalis was determined. Fecundity ranged from 9922 to 8389 with a mean value of 36361. The number of ova in the dorsal lobe was less than that of ventral lobe. Log-log relationship between fecundity and total length, fish weight, ovary weight and ovary length were determined.

Length-weight relationship and condition factor of black carp (Mylopharyngodon spiceus Richardson) in Bangladesh

The length-weight relationship and condition factor of Mylopharyngodon spiceus were determined. The result of the study showed the dependence of weight (W) on the total length (L) in the following form: W= 0.006L(super 3.156) or in the logarithmic form Log W=- 2.1851 + 3.156 Log L. Standard errors of length and weight were 0.674 cm and 3.214 g respectively. The co-efficient correlation "r" was found to be 0.972 which indicated that the relationship between length and body weight of the fish was highly significant. The t-test also indicated that the correlation between length and weight was significant. The range and mean value of condition factor (K) were 0.865 to 1.041 and 0.958 respectively.

Simulation of three-dimensional viscous flow in turbomachinery geometries using a solution-adaptive unstructured mesh methodology

This paper presents a numerical method for the simulation of flow in turbomachinery blade rows using a solution-adaptive mesh methodology. The fully three-dimensional, compressible, Reynolds-averaged Navier-Stokes equations with k-ε turbulence modeling (and low Reynolds number damping terms) are solved on an unstructured mesh formed from tetrahedral finite volumes. At stages in the solution, mesh refinement is carried out based on flagging cell faces with either a fractional variation of a chosen variable (like Mach number) greater than a given threshold or with a mean value of the chosen variable within a given range. Several solutions are presented, including that for the highly three-dimensional flow associated with the corner stall and secondary flow in a transonic compressor cascade, to demonstrate the potential of the new method.

Distribution of wave heights in Phitti Creek during southwest monsoon

A waverider buoy was deployed in Phitti Creek (24°33'N; 67°03'E) for wave measurements during April-July 1986. Using Tucker's method wave records were calculated in terms of significant wave height (Hs) and Maximum Wave Height (Hmax). For each parameter weekly mean and standard deviation values were also computed for statistical analysis. For Hs the lowest mean value of 0.8m and for Hmax the lowest mean value of 1.51m were observed in the fourth week of April whereas the highest mean value observed for Hs was 3.02m and for Hmax was 4.94m in the fourth week of June, 1986.

Unsteady ejectors: The effect of driver jet mark-space ratio

mark Unsteady ejectors can be driven by a wide range of driver jets. These vary from pulse detonation engines, which typically have a long gap between each slug of fluid exiting the detonation tube (mark-space ratios in the range 0.1-0.2) to the exit of a pulsejet where the mean mass flow rate leads to a much shorter gap between slugs (mark-space ratios in the range 2-3). The aim of this paper is to investigate the effect of mark-space ratio on the thrust augmentation of an unsteady ejector. Experimental testing was undertaken using a driver jet with a sinusoidal exit velocity profile. The mean value, amplitude and frequency of the velocity profile could be changed allowing the length to diameter ratio of the fluid slugs L/D and the mark-space ratio (the ratio of slug length to the spacing between slugs) L/S to be varied. The setup allowed L/S of the jet to vary from 0.8 to 2.3, while the L/D ratio of the slugs could take any values between 3.5 and 7.5. This paper shows that as the mark-space ratio of the driver jet is increased the thrust augmentation drops. Across the range of mark-space ratios tested, there is shown to be a drop in thrust augmentation of 0.1. The physical cause of this reduction in thrust augmentation is shown to be a decrease in the percentage time over which the ejector entrains ambient fluid. This is the direct result ofthe space between consecutive slugs in the driver jet decreasing. The one dimensional model reported in Heffer et al. [1] is extended to include the effect of varying L/S and is shown to accurately capture the experimentally measured behavior ofthe ejector. Copyright © 2010 by the American Institute of Aeronautics and Astronautics, Inc.

Length-weight relationship and relative condition factor of pond-reared mahseer, Tor putitora(Ham.)

The study deals with the length-weight relationship and relative condition factor (Kn) of mahseer, Tor putitora reared for 150 days in ponds. The logarithmic form of equation for the relationship was found to be logW = -1.727+2.875logL or W=O.Ol875U·875 • The graphical presentation of the parabolic and logarithmic forms showed respectively the curvilinear and linear relationships between length and weight of the fish. The mean value (±sd) of relative condition factor was found to be 0.95±0.12. The exponential value 'b' was found to be 2.96 and the coefficient of correlation 'r' was 0.965, which showed strong and highly correlated relationships between length and weight of the fish.

Diesel Cylinder Charge Properties: Feed-Forward Control and Cycle-by-Cycle Analysis Using an In-Cylinder Gas Sampling System

Common-rail fuel injection systems on modern light duty diesel engines are effectively able to respond instantaneously to changes in the demanded injection quantity. In contrast, the air-system is subject to significantly slower dynamics, primarily due to filling/emptying effects in the manifolds and turbocharger inertia. The behaviour of the air-path in a diesel engine is therefore the main limiting factor in terms of engine-out emissions during transient operation. This paper presents a simple mean-value model for the air-path during throttled operation, which is used to design a feed-forward controller that delivers very rapid changes in the in-cylinder charge properties. The feed-forward control action is validated using a state-of-the-art sampling system that allows true cycle-by-cycle measurement of the in-cylinder CO2 concentration. © 2011 SAE International.

Feasibility of bi-culture of mud crab (Scylla serrata) and shrimp (Penaeus monodon)

A study on the feasibility of bi-culture of mud crab (Scylla serrata) and shrimp (Penaeus monodon) in brackishwater earthen ponds (0.1 ha each) was carried out for a period of five months (March-August). Nursed shrimp juvenile (ABL:· 3.36±0.23 em and ABW: 0.26±0.04 g) and crab juvenile (ACL: 2.61±0.22 cm, ACW: 4.63±0.11 cm and ABW: 43±2.64 g) were stocked following the experimental design of shrimp 2/m2 (Treatment-1), shrimp 2/m2 and mud crab l/m2 (Treatment-2) and shrimp 2/m2 and mud crab 0.5/m2 (Treatment-3). Crabs were fed with chopped trash tilapia @ 10~5%, while shrimp were fed with Saudi-Bangla shrimp feed @ 3~5% of biomass twice daily. Significantly (p<0.05) higher specific growth rate (SGR) of shrimp and mud crab was 1.86% (g/day) in T2 and 0.83% (g/day) in T3, respectively. The survival of shrimp and mud crab also varied significantly (p<0.05) with a higher mean value of74.63% in Tl and 51.04% in T3, respectively. The production of shrimp (424.09 kg/ha) was significantly (p<0.05) higher in Tl and that of mud crab (568.80 kg/ha) in T2. Significantly (p<0.05) highest total production of 871.29 kg!ha was in T2 followed by 708.52 kg/ha in T3 and 424.09 kg/ha in Tl. The results indicate that mud crab can be cultured at a stocking rate of 1/m2 together with shrimp at 2/m2 •

Heavy metal concentration in South Vietnam waters

Data obtained from investigations which had been carried out during 1998-1999 in the waters of South Vietnam indicate that concentrations of Fe and Zn were usually higher than permissible limits. In the East South Vietnam waters, Fe concentration varied from 77 to 4450g/l (mean 1045g/l) and Zn concentration varied from 7.24 to 74.1g/l (mean 26.7g/l), Pollution coefficients of the two metals were 10.4 and 2.7 respectively. In the Gulf of Thailand, variation range of Fe was 133-850g/l (mean 318g/l) and of Zn was 4.8-167.8g/l (mean 23.46g/l); corresponding pollution coefficients were 3.2 and 2.3. Mn, Cu, As had mean concentrations lower than permissible limits. In the East South Vietnam waters, variation range for Mn was 9.0-444.6g/l (mean 57.0g/l), for Cu was 1.0- 20.3g/l (mean 3.1g/l) and for As was 1.0-10.5 g/l (mean 3.7 g/l). In the Gulf of Thailand, Mn concentration varied from 1.2 to 410.5g/l (mean 19.1g/l), Cu concentration varied from 1.2 to 14.7g/l (mean 3.7g/l), variation range of As concentration was 1.0-13.3g/l with the mean value was 3.6g/l. Scarce data relating to Hg, Cd, Pb showed that their concentrations in the East South Vietnam waters were negligible (usually < 1.0g/l).

The study of maturational progress in the whitespotted rabbitfish (Siganus sutor) under different photoperiod and light intensity conditions

The rule of light on the timing of maturation and spawning in tropical and subtropical regions is not clear well, because the reproductive cycle in these systems is lunar synchronized. In this study, thus, the effects of different light regimes were investigated on maturational progress of whitespotted rabbitfish, Siganus sutor, the commercial species in Persian Gulf and Oman Sea. During prespawning season, 50 adult fish were randomly divided into ten 300-l tanks (n=5). The fish in control tank received indoor light condition and the fish in each other tanks were exposed to nine different combinations of photoperiod (8L: 16D, 12L: 12D, 16L: 8D) and light intensity (1000, 2000, 3000 lux). After 60 days, GSI and HSI values, serum levels of estradiol (E2), testosterone (T), 17-α hydroxyprogestrone (OHP), calcium (Ca2+) and gonad histology were evaluated for females and males. In females the GSI mean values of exposed fish increased in comparison with control except for fish were kept under 8L, 2000 lux (tank 8). These differences were significant only for fishes in tank 7 (8L, 3000 lux). In the cases of HSI, the results were converse, so that, the most of thanks showed significant decreasing than fishes reared under indoor condition. Morphology and histology study of Ovaries showed three developmental phases including 3, 4 and chiefly 5 that were parallel with GSI values. Fortheremore the serum levels of E2 was recorded between 0.54-15.8 ng/ml in different fish and their mean values were lower than control in all treatmants (P> 0.05). In males, the similar results were obtained. The GSI and HSI mean values in experimental regimes compared with control were upper and lower, respectively, except for fishes were reared in tank 1 (16L, 3000 lux). Testes histology of fishes were reared under different regimes showed signs of stage 5, since no blood vessels observed and thick milt exuded on slight pressure. The mean values of testosterone consentration in fishes were kept in tanks 1 and 6 (12L, 1000 lux) were higher and in other ones were lower than control group. It is also noted that the OHP and Ca2+ had diverse results including increasing and decreasing mean values than control. So, these factors contrary to E2 and T were not suitable to evaluation of maturity in both sexes. On the basis of ovarian structure in stage 5, oocyte development pattern in this species was group synchronous. So, increased mean of GSI versus decreased values of HSI, E2 and perhaps Ca2+ were the signs of improved maturation. But in males, reduced levels of T and similarity of testes morphology in all samples caused that GSI mean value was the only indicator for differentiating among treatments. These findings suggest that alternations were used in light regimes have been the reason of improved maturity in all treatments except fishes reared in tank 8. The ١٠٧ rule of light intensity on induction of maturity was cleared by comparision between fishes in tanks 4, 5, 6 and control group. Because day length was the same whereas fishes in tanks 4, 5 and 6 were exposed to increased light intensity compared with control. This fact verified by results was obtained from fishes in tanks 9 and especially 7, since photoperiod in this group was lower than control. So, higher intensity was considered as the reason of alternations. Contrasting with indoor condition, Induced maturity was also cleared for fishes were kept in tanks 1, 2 and 3, where both of light duration and intensity were increased. But, the rule of photoperiod was individually demonstrated when obtained results were compared with similar light intensities in other treatments. In conclusion, with comparison among different light regimes it is declared that siganids were kept under light condition of tank 2 including 16h light duration combined with 2000 lux intensity showed the best signs of sexual maturation in both sexes. On the basis of this study, setting up the spring light condition during prespawning season induces maturation in withspotted rabbitfish. This improvement not only by influence of photoperiod or light intensity, separately, but obtained through interaction between them. Thus, determination of threshold and resistance to light be recommended before exposure, although using proper regime during suitable time are necessary to achieve purposes considerably.

Robust airfoil design with respect to boundary layer transition

In order to disign an airfoil of which maximum lift coefficient (CL max) is not sensitive to location of forced top boundary layer transition. Taking maximizing mean value of CL max and minimizing standard deviation as biobjective, leading edge radius, manximum thickness and its location, maximum camber and its location as deterministic design variables, location of forced top boundary layer transition as stochastic variable, XFOIL as deterministic CFD solver, non-intrusive polynomial chaos as substitute of Monte Carlo method, we completed a robust airfoil design problem. Results demonstrate performance of initial airfoil is enhanced through reducing standard deviation of CL max. Besides, we also know maximum thickness has the most dominating effect on mean value of CL max, location of maximum thickness has the most dominating effect on standard deviation of CL max, maximum camber has a little effect on both mean value and standard deviation, and maximum camber is the only element of which increase can lead increase of mean value and standard deviation at the same time. Copyright © 2009 by the American Institute of Aeronautics and Astronautics, Inc.

Model based control for closed loop testing of 1-D engine simulation models

1-D engine simulation models are widely used for the analysis and verification of air-path design concepts and prediction of the resulting engine transient response. The latter often requires closed loop control over the model to ensure operation within physical limits and tracking of reference signals. For this purpose, a particular implementation of Model Predictive Control (MPC) based on a corresponding Mean Value Engine Model (MVEM) is reported here. The MVEM is linearised on-line at each operating point to allow for the formulation of quadratic programming (QP) problems, which are solved as the part of the proposed MPC algorithm. The MPC output is used to control a 1-D engine model. The closed loop performance of such a system is benchmarked against the solution of a related optimal control problem (OCP). As an example this study is focused on the transient response of a light-duty car Diesel engine. For the cases examined the proposed controller implementation gives a more systematic procedure than other ad-hoc approaches that require considerable tuning effort. © 2012 IFAC.