Foliar photochemical processes and carbon metabolism under favourable and adverse winter conditions in a Mediterranean mixed forest, Catalonia (Spain)

Evergreen trees in the Mediterranean region must cope with a wide range of environmental stresses from summer drought to winter cold. The mildness of Mediterranean winters can periodically lead to favourable environmental conditions above the threshold for a positive carbon balance, benefitting evergreen woody species more than deciduous ones. The comparatively lower solar energy input in winter decreases the foliar light saturation point. This leads to a higher susceptibility to photoinhibitory stress especially when chilly (< 12 C) or freezing temperatures (< 0 C) coincide with clear skies and relatively high solar irradiances. Nonetheless, the advantage of evergreen species that are able to photosynthesize all year round where a significant fraction can be attributed to winter months, compensates for the lower carbon uptake during spring and summer in comparison to deciduous species. We investigated the ecophysiological behaviour of three co-occurring mature evergreen tree species (Quercus ilex L., Pinus halepensis Mill., and Arbutus unedo L.). Therefore, we collected twigs from the field during a period of mild winter conditions and after a sudden cold period. After both periods, the state of the photosynthetic machinery was tested in the laboratory by estimating the foliar photosynthetic potential with CO2 response curves in parallel with chlorophyll fluorescence measurements. The studied evergreen tree species benefited strongly from mild winter conditions by exhibiting extraordinarily high photosynthetic potentials. A sudden period of frost, however, negatively affected the photosynthetic apparatus, leading to significant decreases in key physiological parameters such as the maximum carboxylation velocity (Vc,max), the maximum photosynthetic electron transport rate (Jmax), and the optimal fluorometric quantum yield of photosystem II (Fv/Fm). The responses of Vc,max and Jmax were highly species specific, with Q. ilex exhibiting the highest and P. halepensis the lowest reductions. In contrast, the optimal fluorometric quantum yield of photosystem II (Fv/Fm) was significantly lower in A. unedo after the cold period. The leaf position played an important role in Q. ilex showing a stronger winter effect on sunlit leaves in comparison to shaded leaves. Our results generally agreed with the previous classifications of photoinhibition-tolerant (P. halepensis) and photoinhibitionavoiding (Q. ilex) species on the basis of their susceptibility to dynamic photoinhibition, whereas A. unedo was the least tolerant to photoinhibition, which was chronic in this species. Q. ilex and P. halepensis seem to follow contrasting photoprotective strategies. However, they seemed equally successful under the prevailing conditions exhibiting an adaptive advantage over A. unedo. These results show that our understanding of the dynamics of interspecific competition in Mediterranean ecosystems requires consideration of the physiological behaviour during winter which may have important implications for long-term carbon budgets and growth trends.

Erikoispuristimen kehitys liikkuvalle raaka-ainerainalle

Tutkimuksen tavoitteena oli kehittää Lappeenrannan teknilliselle yliopistolle nopeasti ja ketterästi liikkuva, lävistyksiä ja muovauksia tekevä puristin. Laitteisto on tarkoitus liittää osaksi tuotantolinjaa, jossa suulakepuristin eli ekstruuderi tuottaa pehmeä, ei-metallista materiaalia katkeamattomasti. Teoriaosuudessa esitellään vaihtoehdot puristimen, ohjauksen, työkalun ja liikutuslaitteiston osalta. Empiriaosuudessa suoritetaan laitteiston eri komponenttien valinta hinnan, nopeuden, kestävyyden, käytettävyyden ja koon perusteella. Tutkimuksen lopussa arvioidaan laitteistokokonaisuuden nopeutta suulakepuristimen tuotaman materiaalin maksiminopeuteen. Laitteiston nopeuden rajoittavana tekijänä toimii puristimen iskunopeus, jonka perusteella suulakepuristimen tuottaman materiaalin etenemisnopeus joudutaan pudottamaan hieman alle puoleen tavoitteena olleesta nopeudesta. Laitteiston kestävyyden heikon kohta on työstöä tekevien komponenttien liikuttamiseen tarkoitettu laitteisto. Puristuslaitteistoa on tarkoitus käyttää kahdeksan tuntia päivässä, viitenä päivänä viikossa, 52 viikkoa vuodessa. Näiden käyttötietojen perusteella koko laitteiston käyttöikä on useita vuosia.

Kestomagnetoidun roottorin mekaniikkasuunnittelu ja -analysointi

Työssä kehitettiin suurnopeuskäyttöön soveltuva kestomagnetoitu roottori olemassa olevan induktiokoneen staattorirunkoon. Kehitystyön tarkoituksena oli selvittää roottorin mekaaniset raja-arvot, kuten maksimi kehänopeus. Samalla otettiin kantaa myös tarvittaviin analysointi- ja mitoitusmenetelmiin. Maksimi kehänopeuden, laakeroinnin ja roottorin skaalattavuuden selvittäminen edellytti myös tarkkaa materiaaliselvitystä ja optimointia. Tästä syystä työn aikana tehtiin tiivistä yhteistyötä materiaalitoimittajien kanssa. Työn tuloksena syntyi uusi menetelmä toteuttaa radiaalisen magneettivuon luova kestomagneettiroottori 200 m/s kehänopeudelle. Suunniteltua roottoriratkaisua käytetään testausroottorina, jolla selvitetään valmistuksen, kokoonpanon ja sähkötehon rajoitteet käytännössä. Suunnittelutyö edellyttikin jatkuvaa iterointia sähkösuunnittelun ja roottorin osien valmistajien kanssa, jotta löydettiin paras kompromissiratkaisu roottorin prototyyppiin. Tämän seurauksena saatiin luotua varsin tarkat suunnittelu- ja analysointiraja-arvot kestomagneettiroottorin tuotteistettavia versioita varten.

Functional changes of human quadriceps muscle injured by eccentric exercise

The present study evaluated functional changes of quadriceps muscle after injury induced by eccentric exercise. Maximal isometric torque of quadriceps and the surface electromyography (root mean square, RMS, and median frequency, MDF) of the vastus medialis oblique (VMO) and vastus lateralis (VL) muscles were examined before, immediately after and during the first 7 days after injury. Serum creatine kinase (CK) levels and magnetic resonance imaging (MRI) were used to identify muscle injury. The subject was used as her own control and percent refers to pre-injury data. Experiments were carried out with a sedentary 23-year-old female. Injury was induced by 4 bouts of 15 maximal isokinetic eccentric contractions (angular velocity of 5º/s; range of motion from 40º to 110º of knee flexion). The isometric torque of the quadriceps (knee at 90º flexion) decreased 52% immediately after eccentric exercise and recovered on the 5th day. The highest reduction of RMS occurred on the 2nd day after injury in both VL (63%) and VMO (66%) and only VL recovered to the pre-injury level on the 7th day. Immediately after injury, the MDF decreased by 5 and 3% (VMO and VL, respectively) and recovered one day later. Serum CK levels increased by 109% on the 2nd day and were still increased by 32% on the 7th day. MRI showed large areas of injury especially in the deep region of quadriceps. In conclusion, eccentric exercise decreased the isometric torque and electromyographic signals of quadriceps muscle, which were recovered in one week, despite the muscle regeneration signals.

Low-frequency fatigue at maximal and submaximal muscle contractions

Skeletal muscle force production following repetitive contractions is preferentially reduced when muscle is evaluated with low-frequency stimulation. This selective impairment in force generation is called low-frequency fatigue (LFF) and could be dependent on the contraction type. The purpose of this study was to compare LFF after concentric and eccentric maximal and submaximal contractions of knee extensor muscles. Ten healthy male subjects (age: 23.6 ± 4.2 years; weight: 73.8 ± 7.7 kg; height: 1.79 ± 0.05 m) executed maximal voluntary contractions that were measured before a fatigue test (pre-exercise), immediately after (after-exercise) and after 1 h of recovery (after-recovery). The fatigue test consisted of 60 maximal (100%) or submaximal (40%) dynamic concentric or eccentric knee extensions at an angular velocity of 60°/s. The isometric torque produced by low- (20 Hz) and high- (100 Hz) frequency stimulation was also measured at these times and the 20:100 Hz ratio was calculated to assess LFF. One-way ANOVA for repeated measures followed by the Newman-Keuls post hoc test was used to determine significant (P < 0.05) differences. LFF was evident after-recovery in all trials except following submaximal eccentric contractions. LFF was not evident after-exercise, regardless of exercise intensity or contraction type. Our results suggest that low-frequency fatigue was evident after submaximal concentric but not submaximal eccentric contractions and was more pronounced after 1-h of recovery.

Compensatory Arm Reactions in Individuals with Parkinson’s Disease

This study examined how perturbation-evoked compensatory arm reactions in individuals with Parkinson’s disease (PD) are influenced by explicit verbal instruction. Ten individuals with PD and 15 older adults without PD responded to surface translations with or without specific instruction to reach for and grasp the handrail. Electromyographic (EMG) and kinematic recordings were taken from the reaching arm. Results showed that individuals with and without PD benefitted similarly from explicit instruction. Explicit instruction resulted in earlier (p=0.005) and larger (p<0.001) medial deltoid EMG responses in comparison to no specific instructions. Compensatory arm reactions also occurred with a higher peak medio-lateral wrist velocity (p<0.001) and higher peak shoulder abduction angular velocity (p<0.001) with explicit instruction. Explicit instruction positively influenced compensatory arm reactions in individuals with and without PD. Future research is needed to determine whether the benefits of instruction persist over time and translate to a loss of balance in real life.

Effet d’une pré-sollicitation maximale isométrique des muscles stabilisateurs sur la coordination intermusculaire lors d’un exercice pluriarticulaire épuisant.

Introduction: Les stratégies d’optimisation de la performance chez les athlètes sont de plus en plus exploitées par les entraîneurs et préparateurs physiques. La potentialisation de post- activation (PAP) est reconnue comme étant un phénomène pouvant mener à une augmentation des performances. L’objectif de la présente étude était de donc décrire les effets d’une pré-sollicitation à la hanche sur la coordination inter-musculaire et la performance au cours d’un exercice épuisant. Méthodes: Six athlètes de patins de vitesse de courte piste (3 de sexe masculin et 3 de sexe féminin; âge: 20.2 ± 2.8 ans; moyenne±écart-type) ont exécuté aléatoirement un exercice qui consistait en 2 séries de 9 blocs de squats sautés maximaux, entre-coupés d’un squat isométrique d’une durée de 5 secondes sans pré-sollicitation préalable (CON) et avec une tâche de pré-sollicitation unilatérale de squat isométrique (EXP) contre une barre fixe de 2x3 secondes. Le pic de puissance moyen, l’amplitude et la fréquence moyenne d’EMG, et la vitesse et l’accélération angulaires des premiers et derniers blocs étaient enregistrés. Résultats: La pré-sollicitation isométrique maximale des membres inférieurs n’a pas amélioré de manière significative la performance de sauts et la coordination des muscles stabilisateurs à la hanche. La fréquence spectrale moyenne a néanmoins témoigné de l’implication de stratégies compensatoires du membre inférieur gauche en réponse à la fatigue. Conclusion: La pré-sollicitation des stabilisateurs à la hanche n’augmenterait pas la performance de squats répétés. Par contre, la fréquence moyenne du grand fessier et du tibial antérieur gauche ont suggéré meilleure résistance à la fatigue des muscles du membre inférieur non-dominant avec une pré-sollicitation. Les résultats de la présente étude indiquent donc la pertinence de considérer la pré-sollicitation dans un objectif de performance et de réadaptation sachant que l’asymétrie est omniprésente chez les athlètes et qu’elle est impliquée dans le taux élevé de blessures enregistré chez cette population.

Hydrodynamic Study of Swirling Fluidized Bed and the Role of Distributor

The study aims to the hydrodynamic characteristics of swirling fluidized bed, using large particles (Geldart D-type) selected from locally available agricultural produce (coffee beans and black pepper). The important variables considered in the present study include percentage area of opening, angle of air injection and the percentage useful area of the distributor. A total of seven distributors have been designed and fabricated for a bed column of 300 mm, namely single row vane type distributors (15˚ and 20˚ vane angle), inclined hole type distributors (15˚ and 20˚ vane angle) and perforated plate distributors. The useful area of distributor of single row vane type, three now vane-type and inclined hole-type distributors are respectively 64%,91% and 94%. The hydrodynamic parameters considered in the present study include distributor pressure drop, air velocity, minimum fluidizing velocity, bed pressure drop, bed height and the bed behaviour. It has been observed that, in general, the distributor pressure drop decreases with an increase in the percentage area of opening, Further, and increase in the area of opening above 17% will not considerably reduce the distributor pressure drop. In the present study, for the distributor with an area of opening 17%, and corresponding to the maximum measured superficial velocity of 4.33 m/s, the distributor pressure drop obtained was 55.25mm of water. The study on the bed behavior revealed that, in a swirling fluidized bed, once swirl motion starts, the bed pressure drop increases with superficial velocity in the outer region and it decreases in the inner region. This means that, with higher superficial velocity, the air might get by-passed through the inner boundary of the bed (around the cone). So, depending on the process for which the bed is used, the maximum superficial velocity is to be limited to have an optimum bed performance.

Response of the benthic macroinvertebrate community to a point source in La Tordera stream (Catalonia, NE Spain)

Vam monitoritzar paràmetres físics i químics, macroinvertebrats bentònics, clorofil·la a, productors primaris i matèria orgànica durant un any (2001-2002) per examinar els efectes d'una font puntual sobre la composició taxonòmica, la estructura de la comunitat, l'organització funcional, la utilització de l'habitat i la estoquiometria al riu la Tordera (Catalunya). Aigües avall de la font puntual, concentració de nutrients, cabal i conductivitat eren majors que al tram d'aigües amunt, mentre que oxigen dissolt era menor. La densitat de macroinvertebrats era més elevada al tram d'aigües avall però la biomassa era similar als dos trams. La riquesa taxonòmica al tram de dalt era un 20% més alt que al tram de baix. Els anàlisis d'ordenació separen clarament els dos trams en el primer eix, mentre que els dos trams presentaven una pauta temporal similar en el segon eix. La similaritat entre els dos trams en composició taxonòmica, densitats i biomasses després de les crescudes d'abril i maig de 2002, indiquen que les pertorbacions del cabal poden actuar com a un mecanisme de reinici de la comunitat bentònica i jugar un paper important per a la restauració d'ecosistemes fluvials. Els dos trams presentaven una biomassa de perifiton, plantes vasculars, CPOM i FPOM similars, mentre que clorofil·la a, algues filamentoses, molses i SPOM eren majors al tram d'aigües avall. La densitat relativa de trituradors era menor sota la font puntual mentre que col·lectors i filtradors van ser afavorits. La biomassa relativa de trituradors també era menor sota la font puntual, però la biomassa de col·lectors i depredadors va augmentar. Les relacions entre densitat de grups tròfics i els seus recursos eren rarament significatives. La relació s'explicava millor amb la biomassa de macroinvertebrats. Els dos trams compartien la mateixa relació per raspadors, col·lectors i filtradors però no per trituradors i depredadors. La densitat i la biomassa de macroinvertebrats es trobaven positivament correlacionades amb la quantitat de recursos tròfics i la complexitat d'habitat, mentre que la riquesa taxonòmica es trobava negativament relacionada amb paràmetres hidràulics. La influència dels substrats inorgànics prenia menor rellevància per a la distribució dels macroinvertebrats. Els anàlisis d'ordenació mostren com les variables del microhabitat de major rellevància eren CPOM, clorofil·la a, algues filamentoses i velocitat. La cobertura de sorra només era significativa per al tram d'aigües amunt i les molses, al d'aigües avall. El número de correlacions significatives entre macroinvertebrats i les variables del microhabitat era més elevat per al tram de dalt que per al de baix, bàsicament per diferències en composició taxonòmica. La biomassa de macroinvertebrats va aportar una informació semblant a la obtinguda per la densitat. Perifiton i molses tenien uns continguts de nutrients similars en els dos trams. Els %C i %N d'algues filamentoses també eren similars en els dos trams però el %P sota la font puntual era el doble que al tram de dalt. Les relacions estoquiomètriques en CPOM, FPOM i SPOM eren considerablement menors sota la font puntual. Els continguts elementals i relacions van ser molt variables entre taxons de macroinvertebrats però no van resultar significativament diferents entre els dos trams. Dípters, tricòpters i efemeròpters presentaven una estoquiometria similar, mentre que el C i el N eren inferiors en moluscs i el P en coleòpters. Els depredadors presentaven un contingut en C i N més elevat que la resta de grups tròfics, mentre que el P era major en els filtradors. Els desequilibris elementals entre consumidors i recursos eren menors en el tram d'aigües avall. A la tardor i l'hivern la major font de nutrients va ser la BOM mentre que a la primavera i a l'estiu va ser el perifiton.

The counter-propagating Rossby-wave perspective on baroclinic instability. Part IV: Nonlinear life cycles

Pairs of counter-propagating Rossby waves (CRWs) can be used to describe baroclinic instability in linearized primitive-equation dynamics, employing simple propagation and interaction mechanisms at only two locations in the meridional plane—the CRW ‘home-bases’. Here, it is shown how some CRW properties are remarkably robust as a growing baroclinic wave develops nonlinearly. For example, the phase difference between upper-level and lower-level waves in potential-vorticity contours, defined initially at the home-bases of the CRWs, remains almost constant throughout baroclinic wave life cycles, despite the occurrence of frontogenesis and Rossby-wave breaking. As the lower wave saturates nonlinearly the whole baroclinic wave changes phase speed from that of the normal mode to that of the self-induced phase speed of the upper CRW. On zonal jets without surface meridional shear, this must always act to slow the baroclinic wave. The direction of wave breaking when a basic state has surface meridional shear can be anticipated because the displacement structures of CRWs tend to be coherent along surfaces of constant basic-state angular velocity, U. This results in up-gradient horizontal momentum fluxes for baroclinically growing disturbances. The momentum flux acts to shift the jet meridionally in the direction of the increasing surface U, so that the upper CRW breaks in the same direction as occurred at low levels

Measuring motion with kinematically redundant accelerometer arrays: theory, simulation and implementation

This work presents two schemes of measuring the linear and angular kinematics of a rigid body using a kinematically redundant array of triple-axis accelerometers with potential applications in biomechanics. A novel angular velocity estimation algorithm is proposed and evaluated that can compensate for angular velocity errors using measurements of the direction of gravity. Analysis and discussion of optimal sensor array characteristics are provided. A damped 2 axis pendulum was used to excite all 6 DoF of the a suspended accelerometer array through determined complex motion and is the basis of both simulation and experimental studies. The relationship between accuracy and sensor redundancy is investigated for arrays of up to 100 triple axis (300 accelerometer axes) accelerometers in simulation and 10 equivalent sensors (30 accelerometer axes) in the laboratory test rig. The paper also reports on the sensor calibration techniques and hardware implementation.

Efeito da intensidade do vento, da pressão e de pontas de pulverização na deriva de aplicações de herbicidas em pré-emergência

Objetivou-se com este trabalho avaliar o efeito de pontas de pulverização, pressão e intensidade do vento na deriva gerada em aplicações simuladas de herbicidas aplicados em pré-emergência. Os modelos de pontas de pulverização e as respectivas pressões testadas foram: SF 11002 (207 e 310 kPa), JA-2 (345 e 655 kPa) e AVI 11002 (207 e 414 kPa). As aplicações foram realizadas em dois períodos, em dias com condições de velocidade de vento distintas, em uma área de 1.200 m², localizada na Fazenda Experimental da FCA/UNESP. Um pulverizador com barra de 12 m, 24 bicos e tanque de 600 L foi utilizado nas aplicações. A calda de aplicação foi composta por água e o corante alimentício FDC-1 foi usado como traçador. A deriva foi amostrada por coletores ativos fixados sobre a barra de pulverização. As velocidades mínimas, médias e máximas de vento registradas no primeiro e segundo períodos das aplicações foram de 7, 14 e 23 km h-1 e 1, 5 e 18 km h-1, respectivamente. Nas duas ocasiões de aplicação, as pontas de pulverização com indução de ar AVI 11002 e de jato cônico vazio JA-2 a 655 kPa resultaram nas menores e maiores quantidades de depósito de líquido detectadas, respectivamente. A maior intensidade do vento incrementou a deriva. A redução na pressão pode ser utilizada para controle de deriva, mas a seleção adequada de uma ponta mostrou ser mais eficiente para esse propósito.

g-acceleration of gravity: its measurement from the shape of water by using a computerized rotational system

This paper proposes a different experimental setup compared with the traditional ones, in order to determine the acceleration of gravity, which is carried out by using a fluid at a constant rotation. A computerized rotational system-by using a data acquisition system with specific software, a power amplifier and a rotary motion sensor-is employed in order to evaluate the angular velocity and g. An equation to determine g is inferred from fluid mechanics. For this purpose, the fluid's parabolic shape inside a cylindrical receptacle is considered using a rotational movement.

Experimental study of the conventional equation to determine a plate's moment of inertia

In this work, we describe an experimental setup in which an electric current is used to determine the angular velocity attained by a plate rotating around a shaft in response to a torque applied for a given period. Based on this information, we show how the moment of inertia of a plate can be determined using a procedure that differs considerably from the ones most commonly used, which generally involve time measurements. Some experimental results are also presented which allow one to determine parameters such as the exponents and constant of the conventional equation of a plate's moment of inertia.

Spin-Stabilized Spacecrafts: Analytical Attitude Propagation Using Magnetic Torques

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)