Fluid-dynamic assessment of sugarcane bagasse to use as feedstock in bubbling fluidized bed gasifiers

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

What is the best additive to use at the ensiling of sugarcane SP81-3250?

Our objective was to determine the best additive to use for the ensiling of sugarcane SP81-3250 based on the nutritional properties and aerobic stability of the silages. The additives evaluated were (1) and (2): salt (NaCl) at rates of 1.0 or 2.0 kg/100 kg fresh sugarcane (as-is basis), respectively; (3) and (4): quicklime (CaO) at rates of 1.0 or 2.0 kg/100 kg fresh sugarcane, respectively; (5) and (6): commercial inoculants Silobac (R) and Maize All (R); and a control treatment. The addition of quicklime reduced the NDF and ADF contents of the silages by 11% compared with the control treatment, but did not increase the digestibility. On the other hand, after 24 h of in vitro fermentation, the application of 1.0 and 2.0% salt reduced the gas production by 34.15 and 33.55 mL/g OM, respectively, and the IVOMD was reduced 5.74 and 5.90%, respectively, compared with the untreated silage. Moreover, the addition of quicklime elevated the pH of the sugarcane silages, with a trend towards an increase in the DM recovery. In contrast, the bacterial inoculants did not alter the pH values, but there was an upward trend for a DM recovery. After the silos were opened, the silages that were treated with salt (independent of the dose) and 1.0% quicklime exhibited greater stability. We recommend applying 1.0 kg of quicklime to each 100 kg of sugarcane at the time of ensiling to improve the nutritional characteristics of sugarcane silage variety SP81-3250.

The association of chlorhexidine digluconate and calcium chloride to use as vehicle of a silicate calcium-based cement

Objective: The purpose of this study was to evaluate the influence of the addition of 2% chlorhexidine digluconate (CHX) associated with 5% calcium chloride (CaCl2 ) on antimicrobial activity, setting time, pH and calcium release of gray mineral trioxide aggregate (GMTA). Materials and Methods: GMTA powder was mixed with water, 2% CHX alone or 2% CHX combined with 5% CaCl2 . Antimicrobial activity was determined against Enterococcus faecalis (ATCC 29212) strains by agar diffusion test. Data obtained were submitted to kruskal wallis tests. Analysis of the setting time was evaluated by American society for testing and materials C266-03 requirements. The pH and calcium release analysis were evaluated, in 24 h, 7, 14 and 28 days using pH meter equipment and atomic absorption spectrophotometer, respectively. Data obtained were analyzed by ANOVA, in 5% significance level. Results: Significant differences were seen (P < 0.01) among the zones of bacterial growth inhibition produced by 5% CaCl2 + 2% CHX combination against E. faecalis when compared with water (P < 0.05). Regarding the setting time, that combination had the shortest setting time (P < 0.05). All associations were alkaline and released calcium. No statistical difference was observed between the experimental groups at the different periods of analysis (P > 0.05). Conclusion: Combination of 5% CaCl2 + 2% CHX reduced the setting time and enhanced the antimicrobial activity of GMTA without changing the pH and calcium release.

Virtual Cilicia Project. How to use Google Earth as a visualization environment in an archaeological context

Over the past few years, archaeology has experienced a rapid development in geophysical prospection and remote sensing techniques. At the same time, the focus of archaeological research has shifted to landscape evelopment and human interaction. To impart the results, new methods and techniques are necessary. Virtual globes such as Google Earth offer fascinating methods of giving interested amateurs the possibility to interactively explore ancient cities and landscapes. Thanks to the increasing usage of GIS in cultural heritage, the implementation of interactive three dimensional learning opportunities becomes less and less tedious, but the non-linear narrative story telling medium demands for a special adaption of the content. This paper summarizes the experience gained during the realization of the “Virtual Cilicia Project” and outlines the future potential of virtual globes in the field of cultural heritage.

One Health approach to use of veterinary pharmaceuticals

An estimated 6051 tons of active substances went into the production of veterinary pharmaceuticals (VPs) for the treatment of food animals in the European Union (EU) in 2004, including 5393 tons of antibiotics and 194 tons of antiparasitics (1). With global meat production projected to increase (2) and the growing market for companion animal pharmaceuticals (3), the use of VPs will continue to increase. Although VPs may benefit the health and welfare of domestic animals and the efficiency of food animal production, they can contaminate the environment through manufacturing, treatment of animals, and disposal of carcasses, offal, urine, feces, and unused products (4) (see the chart). This contamination is a threat to nontarget species, including humans. With Spain having recently authorized marketing of a VP that was banned in South Asia in the past decade in light of environmental impacts, we recommend strengthening of current procedures and addition of a more proactive, holistic, One Health approach applicable to all VPs.

Beyond sexist beliefs: How do people decide to use gender-inclusive language?

When people use generic masculine language instead of more gender-inclusive forms, they communicate gender stereotypes and sometimes exclusion of women from certain social roles. Past research related gender-inclusive language use to sexist beliefs and attitudes. Given that this aspect of language use may be transparent to users, it is unclear whether people explicitly act on these beliefs when using gender-exclusive language forms or whether these are more implicit, habitual patterns. In two studies with German-speaking participants, we showed that spontaneous use of gender-inclusive personal nouns is guided by explicitly favorable intentions as well as habitual processes involving past use of such language. Further indicating the joint influence of deliberate and habitual processes, Study 2 revealed that language-use intentions are embedded in explicit sexist ideologies. As anticipated in our decision-making model, the effects of sexist beliefs on language emerged through deliberate mechanisms involving attitudes and intentions.

Health beliefs and attitudes of HPV among Hispanic parents as predictors of intention to use the HPV vaccine

Human Papillomavirus (HPV) is the most common sexually transmitted disease in the United States. Although HPV prevalence is high in the United States, there are a limited number of research studies that focus on Hispanics, who have higher incidence rates of cervical cancer than their non-Hispanic counterparts. The HPV vaccine introduced in 2006 may offer a feasible solution to the issues surrounding high prevalence of HPV. Due to the high prevalence of HPV infection among adolescents and young adults it has been suggested that HPV vaccination begin prior to onset sexual activity and focus on non-sexually active adolescents and pre-adolescents. Consequently, it has become increasingly important to assess knowledge and awareness of HPV in order to develop effective intervention strategies. This pilot study evaluated the knowledge and health beliefs of Hispanic parents regarding HPV and the HPV vaccine using a newly developed questionnaire based on the constructs of the Health Belief Model. The sample was recruited from an ob-gyn office in El Paso, Texas. Descriptive data show that the majority of the sample was female (94.1%), Hispanic (76.5%), Catholic (64.7%), and had at least a high school education (55.9%). Chi-square analysis revealed that the following variables differed amongst parents who intended to vaccinate their child against HPV and those who did not: religion (p=0.038), perceived severity item "HPV infections are easily treated" (p=0.052), perceived benefits item "It is better to vaccinate a child against an STI before they become sexually active" (p=0.014) and perceived barriers item "The HPV vaccine may have serious side effects that could harm my child" (p=0.004). Univariate logistic regression indicated that religion (OR = 4.8, CI: 1.04, 21.8) and "The HPV vaccine may have serious side effects that could harm my child" (OR = 15.9, CI: 1.73, 145.8) were significant predictors of parental intention to vaccinate. Multivariate logistic regression, using backwards elimination, indicated that religion (OR = 7.7, CI: 1.25, 47.8) and "The HPV vaccine may have serious side effects that may harm my child" (OR = 7.6, CI: 1.15, 50.2) were the best predictive variables for parental intention to vaccinate. ^

Hearing aid use and adherence: A systematic review of the literature concerning the socioeconomic and psychological influences on hearing aid use and barriers to use

The current hearing health situation in the United States does not provide adequate support to individuals with hearing loss. More research is needed to give more support to these individuals. By conducting a systematic review of relevant literature from 1990 to present, I identified many factors that influence an individual's use of hearing aids. There are two research questions in this study: 1. Does the provision of screening and access to hearing aids decrease the negative effects of hearing loss? 2. Why is it difficult for people with hearing loss to adapt to and use hearing aids? The population of interest was adults (>18 years old) with hearing loss. Factors that influenced use of hearing aids for this population included age, gender, socioeconomic status, education, perceived severity of hearing loss, cost of hearing aids, screening, perceived benefit, stigmatization, perceived control, cognitive capability, personality, and social support. Research suggests that more efficient screening of at-risk individuals and the provision of better access to these individuals would prevent many of the negative effects of hearing loss.^

Comparative analysis of meta-analysis methods: when to use which?

Background: Several meta-analysis methods can be used to quantitatively combine the results of a group of experiments, including the weighted mean difference, statistical vote counting, the parametric response ratio and the non-parametric response ratio. The software engineering community has focused on the weighted mean difference method. However, other meta-analysis methods have distinct strengths, such as being able to be used when variances are not reported. There are as yet no guidelines to indicate which method is best for use in each case. Aim: Compile a set of rules that SE researchers can use to ascertain which aggregation method is best for use in the synthesis phase of a systematic review. Method: Monte Carlo simulation varying the number of experiments in the meta analyses, the number of subjects that they include, their variance and effect size. We empirically calculated the reliability and statistical power in each case Results: WMD is generally reliable if the variance is low, whereas its power depends on the effect size and number of subjects per meta-analysis; the reliability of RR is generally unaffected by changes in variance, but it does require more subjects than WMD to be powerful; NPRR is the most reliable method, but it is not very powerful; SVC behaves well when the effect size is moderate, but is less reliable with other effect sizes. Detailed tables of results are annexed. Conclusions: Before undertaking statistical aggregation in software engineering, it is worthwhile checking whether there is any appreciable difference in the reliability and power of the methods. If there is, software engineers should select the method that optimizes both parameters.

Vanadium-Doped In and Sn Sulphides: Photocatalysts able to use the whole visible light spectrum

Using photocatalysis for energy applications depends, more than for environmental purposes or selective chemical synthesis, on converting as much of the solar spectrum as possible; the best photocatalyst, titania, is far from this. Many efforts are pursued to use better that spectrum in photocatalysis, by doping titania or using other materials (mainly oxides, nitrides and sulphides) to obtain a lower bandgap, even if this means decreasing the chemical potential of the electron-hole pairs. Here we introduce an alternative scheme, using an idea recently proposed for photovoltaics: the intermediate band (IB) materials. It consists in introducing in the gap of a semiconductor an intermediate level which, acting like a stepstone, allows an electron jumping from the valence band to the conduction band in two steps, each one absorbing one sub-bandgap photon. For this the IB must be partially filled, to allow both sub-bandgap transitions to proceed at comparable rates; must be made of delocalized states to minimize nonradiative recombination; and should not communicate electronically with the outer world. For photovoltaic use the optimum efficiency so achievable, over 1.5 times that given by a normal semiconductor, is obtained with an overall bandgap around 2.0 eV (which would be near-optimal also for water phtosplitting). Note that this scheme differs from the doping principle usually considered in photocatalysis, which just tries to decrease the bandgap; its aim is to keep the full bandgap chemical potential but using also lower energy photons. In the past we have proposed several IB materials based on extensively doping known semiconductors with light transition metals, checking first of all with quantum calculations that the desired IB structure results. Subsequently we have synthesized in powder form two of them: the thiospinel In2S3 and the layered compound SnS2 (having bandgaps of 2.0 and 2.2 eV respectively) where the octahedral cation is substituted at a â?10% level with vanadium, and we have verified that this substitution introduces in the absorption spectrum the sub-bandgap features predicted by the calculations. With these materials we have verified, using a simple reaction (formic acid oxidation), that the photocatalytic spectral response is indeed extended to longer wavelengths, being able to use even 700 nm photons, without largely degrading the response for above-bandgap photons (i.e. strong recombination is not induced) [3b, 4]. These materials are thus promising for efficient photoevolution of hydrogen from water; work on this is being pursued, the results of which will be presented.

Hydrolysis of lignocellulosic material to sugars as feedstock for growing microorganisms

Los materiales lignocelulósicos son potenciales precursores de recursos bioenergéticos, por lo que sería interesante desarrollar tecnologías capaces de capturar su energía y utilizarla en el sector del transporte como combustibles. El azúcar contenido en los materiales lignocelulósicos puede ser liberado por medio de la hidrólisis y usado después por microorganismos. El objetivo del proyecto es encontrar un método de separación de la celulosa y la biomasa de chopo en monómeros de glucosa por medio de la hidrólisis. Para ello se han estudiado tres métodos de hidrólisis: la mecano-catálisis, utilizando diferentes tipos de molinos y caolinita como catalizador, la hidrólisis con líquidos iónicos, estudiando la viabilidad de los reactivos [C4mim+][I-] y [C4mim+][PF6-], y la hidrólisis ácida, usando HCl en concentraciones y temperaturas distintas para optimizar el proceso. En todos los casos se ha llevado a cabo un pretratamiento y se ha aplicado el método de TLC como verificación del proceso. Los tres métodos se han comparado y se ha desarrollado un método de correlación entre la mancha de TLC y la concentración del producto.