H [ [Material gráfico]: first selection blue : brand : Valencia - Spain.

Tit. en la etiqueta: "First selection / blue / H / brand / Valencia - Spain"

The second school year; a course of study with detailed selection of lesson material, arranged by months, and correlated,

"Helpful books for primary grades": p. 237-240.

A Multi-Criteria GIS-Based Route Selection Tool for Hazardous Material Transport: Consideration of Environmental Consequence, Traffic Congestions and Costs

Hazardous materials are substances that, if not regulated, can pose a threat to human populations and their environmental health, safety or property when transported in commerce. About 1.5 million tons of hazardous material shipments are transported by truck in the US annually, with a steady increase of approximately 5% per year. The objective of this study was to develop a routing tool for hazardous material transport in order to facilitate reduced environmental impacts and less transportation difficulties, yet would also find paths that were still compelling for the shipping carriers as a matter of trucking cost. The study started with identification of inhalation hazard impact zones and explosion protective areas around the location of hypothetical hazardous material releases, considering different parameters (i.e., chemicals characteristics, release quantities, atmospheric condition, etc.). Results showed that depending on the quantity of release, chemical, and atmospheric stability (a function of wind speed, meteorology, sky cover, time and location of accidents, etc.) the consequence of these incidents can differ. The study was extended by selection of other evaluation criteria for further investigation because health risk as an evaluation criterion would not be the only concern in selection of routes. Transportation difficulties (i.e., road blockage and congestion) were incorporated as important factor due to their indirect impact/cost on the users of transportation networks. Trucking costs were also considered as one of the primary criteria in selection of hazardous material paths; otherwise the suggested routes would have not been convincing for the shipping companies. The last but not least criterion was proximity of public places to the routes. The approach evolved from a simple framework to a complicated and efficient GIS-based tool able to investigate transportation networks of any given study area, and capable of generating best routing options for cargos. The suggested tool uses a multi-criteria-decision-making method, which considers the priorities of the decision makers in choosing the cargo routes. Comparison of the routing options based on each criterion and also the overall suitableness of the path in regards to all the criteria (using a multi-criteria-decision-making method) showed that using similar tools as the one proposed by this study can provide decision makers insights in the area of hazardous material transport. This tool shows the probable consequences of considering each path in a very easily understandable way; in the formats of maps and tables, which makes the tradeoffs of costs and risks considerably simpler, as in some cases slightly compromising on trucking cost may drastically decrease the probable health risk and/or traffic difficulties. This will not only be rewarding to the community by making cities safer places to live, but also can be beneficial to shipping companies by allowing them to advertise as environmental friendly conveyors.

Miniaturized structures for removal or selection of particles from liquid flow

The aim of this work was the development of miniaturized structures useful for retention and/or selection of particles and viscous substances from a liquid flow. The proposed low costs structures are similar to macroscopic wastewater treatment systems, named baffles, and allow disassemble. They were simulated using FEMLAB 3.2b package and manufactured in acrylic with conventional tools. Tests for retention or selection of particles in water or air and viscous fluids in water were carried out. Either in air or water particles with 50 mu m diameter will be retained but not with 13 mu m diameter. In aqueous flow, it is also possible the retention of viscous samples, such as silicone 350 cSt. The simulated results showed good agreement with experimental measurements. These miniaturized structures can be useful in sample pretreatment for chemical analysis and microorganism manipulation. (C) 2007 Elsevier B.V. All rights reserved.

Comparative evaluation of underlying causes of death processed by the Automated Classification of Medical Entities and the Underlying Cause of Death Selection Systems

INTRODUCTION: The correct identification of the underlying cause of death and its precise assignment to a code from the International Classification of Diseases are important issues to achieve accurate and universally comparable mortality statistics These factors, among other ones, led to the development of computer software programs in order to automatically identify the underlying cause of death. OBJECTIVE: This work was conceived to compare the underlying causes of death processed respectively by the Automated Classification of Medical Entities (ACME) and the "Sistema de Seleção de Causa Básica de Morte" (SCB) programs. MATERIAL AND METHOD: The comparative evaluation of the underlying causes of death processed respectively by ACME and SCB systems was performed using the input data file for the ACME system that included deaths which occurred in the State of S. Paulo from June to December 1993, totalling 129,104 records of the corresponding death certificates. The differences between underlying causes selected by ACME and SCB systems verified in the month of June, when considered as SCB errors, were used to correct and improve SCB processing logic and its decision tables. RESULTS: The processing of the underlying causes of death by the ACME and SCB systems resulted in 3,278 differences, that were analysed and ascribed to lack of answer to dialogue boxes during processing, to deaths due to human immunodeficiency virus [HIV] disease for which there was no specific provision in any of the systems, to coding and/or keying errors and to actual problems. The detailed analysis of these latter disclosed that the majority of the underlying causes of death processed by the SCB system were correct and that different interpretations were given to the mortality coding rules by each system, that some particular problems could not be explained with the available documentation and that a smaller proportion of problems were identified as SCB errors. CONCLUSION: These results, disclosing a very low and insignificant number of actual problems, guarantees the use of the version of the SCB system for the Ninth Revision of the International Classification of Diseases and assures the continuity of the work which is being undertaken for the Tenth Revision version.

Drilling damage in composite material

The characteristics of carbon fibre reinforced laminates have widened their use from aerospace to domestic appliances, and new possibilities for their usage emerge almost daily. In many of the possible applications, the laminates need to be drilled for assembly purposes. It is known that a drilling process that reduces the drill thrust force can decrease the risk of delamination. In this work, damage assessment methods based on data extracted from radiographic images are compared and correlated with mechanical test results—bearing test and delamination onset test—and analytical models. The results demonstrate the importance of an adequate selection of drilling tools and machining parameters to extend the life cycle of these laminates as a consequence of enhanced reliability.

Materials selection for a set of multiple parts considering manufacturing costs and weight reduction with structural isoperformance using direct multisearch optimization

Materials selection is a matter of great importance to engineering design and software tools are valuable to inform decisions in the early stages of product development. However, when a set of alternative materials is available for the different parts a product is made of, the question of what optimal material mix to choose for a group of parts is not trivial. The engineer/designer therefore goes about this in a part-by-part procedure. Optimizing each part per se can lead to a global sub-optimal solution from the product point of view. An optimization procedure to deal with products with multiple parts, each with discrete design variables, and able to determine the optimal solution assuming different objectives is therefore needed. To solve this multiobjective optimization problem, a new routine based on Direct MultiSearch (DMS) algorithm is created. Results from the Pareto front can help the designer to align his/hers materials selection for a complete set of materials with product attribute objectives, depending on the relative importance of each objective.

Interaction paradigms versus age-related user profiles: an evaluation on content selection

Novel input modalities such as touch, tangibles or gestures try to exploit human's innate skills rather than imposing new learning processes. However, despite the recent boom of different natural interaction paradigms, it hasn't been systematically evaluated how these interfaces influence a user's performance or whether each interface could be more or less appropriate when it comes to: 1) different age groups; and 2) different basic operations, as data selection, insertion or manipulation. This work presents the first step of an exploratory evaluation about whether or not the users' performance is indeed influenced by the different interfaces. The key point is to understand how different interaction paradigms affect specific target-audiences (children, adults and older adults) when dealing with a selection task. 60 participants took part in this study to assess how different interfaces may influence the interaction of specific groups of users with regard to their age. Four input modalities were used to perform a selection task and the methodology was based on usability testing (speed, accuracy and user preference). The study suggests a statistically significant difference between mean selection times for each group of users, and also raises new issues regarding the “old” mouse input versus the “new” input modalities.

Experimental procedures for the identification of material properties of intervertebal disc - a contribution for the development of biomimetic substitutes for the nucleus pulposus

Tese de Doutoramento em Engenharia Mecânica.

The Adolpho Lutz collection of Tabanidae: (Diptera): I. The described genera and species, condition of the collection, and selection of lectotypes

A study of the Adolpho Lutz Collection of Tabanidae at the Instituto Oswaldo Cruz and of additional Lutz material at the Instituto Butantan in São Paulo is reported. Of the ninety-four species of Tabanidae validly described by Lutz, type material of eighty-four was recognized, either holotypes, allotypes or syntypes. Lectotypes were selected from among syntype series or remaining specimens and all type material was labelled. Of the ten species of which no type material could be found, neotypes were designated in the case of two species, Erephosis nigricans and Erephosis pseudo-aurimaculata. Types of three species, Chrysops ecuadoriensis, Dichelacera salvadorensis and Esenbeckia nigricorpus are believed to have been in Hamburg and destroyed during the last war. Types of two species, Esenbeckia biscutellata and E. dubia, and additional type material of several others are believed to have been in Montevideo. A request for information about them remains unanswered. Types of the remaining three species, Dichelacera intermedia, Dichelacera laceriascia and Esenbeckia distinguenda could not be found, and it is believed that at least the type of the last species was accidentally destroyed. Three specific of subspecific names proposed by Lutz but palaced by others in synonymy have been revalidated, Acanthocera intermedia, Erephosis brevistria and Esenbeckia fenestrata. Generic placement of two names has been changed, Esenbeckia arcuata ricardoae to Proboscoides, and Selasoma giganteum to Stibasoma. Seven specific names proposed by Lutz appear to be synonyms of earlier names, as follows: Bombylopsis juxtaleonina Lutz and Castro, 1936 = B. leonina Lutz, 1909. Bombylopsis pseudoanalis Lutz, 1909 = B. erythronotata (Bigot, 1892). Esenbeckia fuscipennis var. flavescens Lutz, 1909 = Esenbeckia fuscipennis Wied., 1828. Fidena chrysopyga Lutz and Castro, 1936 = F. atra Lutz and Castro, 1936. Laphriomyia longipalpis Lutz and Castro, 1937 = L. mirabilis Lutz, 1911. Stibasoma semiflavum Lutz, 1915 = St. bicolor Bigot, 1892. Tabanus hesperus Lutz, 1912 = Chlorotabanus (Cryptolylus) innotescens (Walker, 1854). Four Lutz names appear to antedate names proposed by others, viz.: Diachlorus angustifrons Kröber, 1930 and D. ochraceus Kröb., 1928 not Macquart, 1850 = Diachlorus fuscistigma Lutz, 1913. Psalidia fairchildi Barretto, 1950 = dicladocera conspicua Lutz and Neiva, 1914. Fidena pseudo-fulvithorax Kröb., 1931 = Erephopsis flavicrinis Lutz, 1909. Esenbeckia lemniscata Enderlein, 1925 = Esenbeckia clari Lutz, 1909. Some comments on Lutz' system of classification are given together with notes on the genotypes and included species of his genera as revaled by his collection and notes.

Edge detection by selection of pieces of level lines

We propose an edge detector based on the selection of wellcontrasted pieces of level lines, following the proposal ofDesolneux-Moisan-Morel (DMM) [1]. The DMM edge detectorhas the problem of over-representation, that is, everyedge is detected several times in slightly different positions.In this paper we propose two modifications of the originalDMM edge detector in order to solve this problem. The firstmodification is a post-processing of the output using a generalmethod to select the best representative of a bundle of curves.The second modification is the use of Canny’s edge detectorinstead of the norm of the gradient to build the statistics. Thetwo modifications are independent and can be applied separately.Elementary reasoning and some experiments showthat the best results are obtained when both modifications areapplied together.

Optimal Contracts, Adverse Selection, and Social Preferences: An Experiment

It has long been standard in agency theory to search for incentive-compatible mechanisms on the assumption that people care only about their own material wealth. However, this assumption is clearly refuted by numerous experiments, and we feel that it may be useful to consider nonpecuniary utility in mechanism design and contract theory. Accordingly, we devise an experiment to explore optimal contracts in an adverse-selection context. A principal proposes one of three contract menus, each of which offers a choice of two incentive-compatible contracts, to two agents whose types are unknown to the principal. The agents know the set of possible menus, and choose to either accept one of the two contracts offered in the proposed menu or to reject the menu altogether; a rejection by either agent leads to lower (and equal) reservation payoffs for all parties. While all three possible menus favor the principal, they do so to varying degrees. We observe numerous rejections of the more lopsided menus, and approach an equilibrium where one of the more equitable contract menus (which one depends on the reservation payoffs) is proposed and agents accept a contract, selecting actions according to their types. Behavior is largely consistent with all recent models of social preferences, strongly suggesting there is value in considering nonpecuniary utility in agency theory.

Myocardial flow reserve by Rb-82 cardiac PET improves the selection of patients eligible for invasive coronary angiography

Aim: We asked whether myocardial flow reserve (MFR) by Rb-82 cardiac PET improve the selection of patients eligible for invasive coronary angiography (ICA). Material and Methods: We enrolled 26 consecutive patients with suspected or known coronary artery disease who performed dynamic Rb-82 PET/CT and (ICA) within 60 days; 4 patients who underwent revascularization or had any cardiovascular events between PET and ICA were excluded. Myocardial blood flow at rest (rMBF), at stress with adenosine (sMBF) and myocardial flow reserve (MFR=sMBF/rMBF) were estimated using the 1-compartment Lortie model (FlowQuant) for each coronary arteries territories. Stenosis severity was assessed using computer-based automated edge detection (QCA). MFR was divided in 3 groups: G1:MFR<1.5, G2:1.5≤MFR<2 and G3:2≤MFR. Stenosis severity was graded as non-significant (<50% or FFR ≥0.8), intermediate (50%≤stenosis<70%) and severe (≥70%). Correlation between MFR and percentage of stenosis were assessed using a non-parametric Spearman test. Results: In G1 (44 vessels), 17 vessels (39%) had a severe stenosis, 11 (25%) an intermediate one, and 16 (36%) no significant stenosis. In G2 (13 vessels), 2 (15%) vessels presented a severe stenosis, 7 (54%) an intermediate one, and 4 (31%) no significant stenosis. In G3 (9 vessels), 0 vessel presented a severe stenosis, 1 (11%) an intermediate one, and 8 (89%) no significant stenosis. Of note, among 11 patients with 3-vessel low MFR<1.5 (G1), 9/11 (82%) had at least one severe stenosis and 2/11 (18%) had at least one intermediate stenosis. There was a significant inverse correlation between stenosis severity and MFR among all 66 territories analyzed (rho= -0.38, p=0.002). Conclusion: Patients with MFR>2 could avoid ICA. Low MFR (G1, G2) on a vessel-based analysis seems to be a poor predictor of severe stenosis severity. Patients with 3-vessel low MFR would benefit from ICA as they are likely to present a significant stenosis in at least one vessel.

Optimal contracts, adverse selection and social preferences: An experiment

It has long been standard in agency theory to search for incentive-compatible mechanisms on the assumption that people care only about their own material wealth. However, this assumption is clearly refuted by numerous experiments, and we feel that it may be useful to consider nonpecuniary utility in mechanism design and contract theory. Accordingly, we devise an experiment to explore optimal contracts in an adverse-selection context. A principal proposes one of three contract menus, each of which offers a choice of two incentive-compatible contracts, to two agents whose types are unknown to the principal. The agents know the set of possible menus, and choose to either accept one of the two contracts offered in the proposed menu or to reject the menu altogether; a rejection by either agent leads to lower (and equal) reservation payoffs for all parties. While all three possible menus favor the principal, they do so to varying degrees. We observe numerous rejections of the more lopsided menus, and approach an equilibrium where one of the more equitable contract menus (which one depends on the reservation payoffs) is proposed and agents accept a contract, selecting actions according to their types. Behavior is largely consistent with all recent models of social preferences, strongly suggesting there is value in considering nonpecuniary utility in agency theory.

Finnish embryo transfer breeding program "ASMO" : description of the goals and a summary of the results of initial selection

Selostus: Alkionsiirtojalostusohjelma "ASMO", sen tavoitteet ja yhteenveto alkuvalinnan tuloksista