Lean management and innovation in operational efficiency: the EGR project implemented by Pirelli Tyre Brazil in Santo André plant

O trabalho tem como objetivo avaliar e descrever analiticamente a implementação de práticas de manufatura enxuta pela Pirelli Pneus no seu complexo industrial da América Latina. Além de uma descrição estruturada e ampla dos princípios de produção de Toyota e fundamentos teóricos do Lean thinking, uma ênfase especial será dedicada ao projeto EGR (Especialistas em Gestão da Rotina), como uma ferramenta estratégica para ser usada pela empresa multinacional italiana no futuro próximo, de modo a alcançar um resultado mais eficaz e eficiente na gestão da rotina diária. Este projeto, que representa um componente significativo do Pirelli Manufacturing System (PMS) e, principalmente, voltado para supervisores e gestores de plantas, consiste principalmente em ajudar a empresa a desenvolver a capacidade empresarial para avaliar corretamente o gap potencial existente entre os resultados atuais e os esperados, para tanto entender os desvios, bem como as causas subjacentes, e melhorar continuamente o desempenho da empresa por meio da padronização de processos e redução de desperdicios. Esses objetivos podem ser perseguidos, atuando em dois meios essenciais: habilidades técnicas e comportamentais de liderança para apoiar cada equipe de projeto; uma maior eficácia na gestão de indicadores de desempenho nas diferentes unidades de fábrica, de acordo com KPIs estabelecidos no nível central pelo Head Quarter. Além disso, a investigação será focada na experiência peculiar da planta de Santo André, onde o EGR começou como piloto, com o objetivo de captar as alterações relevantes (no lado organizacional e econômico) que este projeto trouxe para a empresa, através da realização de pesquisa de campo e entrevistas, que são orientados a recolher provas, considerações e opiniões de todos os principais atores envolvidos.

The effect of incorporation of a Brazilian water treatment plant sludge on the properties of ceramic materials

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Contribuições da implantação da tecnologia de informação MES - Manufacturing Execution System - para a melhoria das dimensões competitivas da manufatura: estudo de caso Novelis Brasil Ltda

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

On the implementation of good manufacturing practices in a small processing unity of mozzarella cheese in Brazil

This study reports the implementation of GMPs in a mozzarella cheese processing plant. The mozzarella cheese manufacturing unit is located in the Southwestern region of the state of Parana, Brazil, and processes 20,000 L of milk daily. The implementation of GMP took place with the creation of a multi-disciplinary team and it was carried out in four steps: diagnosis, report of the diagnosis and road map, corrective measures and follow-up of GMP implementation. The effectiveness of actions taken and GMP implementation was compared by the total percentages of non-conformities and conformities before and after implementation of GMR Microbiological indicators were also used to assess the implementation of GMP in the mozzarella cheese processing facility. Results showed that the average percentage of conformity after the implementation of GMP was significant increased to 66%, while before it was 32% (p < 0.05). The populations of aerobic microorganisms and total coliforms in equipment were significantly reduced (p < 0.05) after the implementation of GMP, as well as the populations of total coliforms in the hands of food handlers (p < 0.05). In conclusion, GMP implementation changed the overall organization of the cheese processing unity, as well as managers and food handlers' behavior and knowledge on the quality and safety of products manufactured. (C) 2011 Elsevier Ltd. All rights reserved.

On the Evolution of the Spatial Economy with Multi-unit/Multi-plant Firms: The Impact of IT Development

This paper examines how the decline of communication costs between management and production facilities within firms and the decrease in trade costs of manufactured goods affect the spatial organization of a two-region economy with multi-unit/multi-plant firms. The development of information technology decreases the costs of communication and trade costs. Thus, the fragmentation of firms is promoted. Our result indicates that, with decreasing communication costs, firms producing low trade-cost products (such as consumer electronics) tend to concentrate their manufacturing plants in low wage countries. In contrast, firms producing high trade-cost products (such as automobiles) tend to have multiple plants serving to segmented markets, even in the absence of wage differentials.

Regional foreign direct investment and wage spillovers:plant level evidence from the UK electronics industry

This paper examines the extent to which foreign investment in the UK generates wage spillovers in the domestic sector of the economy using a simultaneous dynamic panel data model and focusing on the electronics sector, possibly the most ‘globalized’ sector of UK manufacturing. It finds evidence that the higher wages paid by foreign firms cause wages in the domestic sector to be bid up. This phenomenon is, however, largely confined to the region where foreign direct investment takes place.

Enabling innovation:knowledge control, sharing and coordination boundaries in UK and German manufacturing

We investigate how boundaries in knowledge control, sharing and co-ordination influence UK and German manufacturing firms’ innovation intensity (an indicator of the volume of product change) and product life (an indicator of the pace of generational change). In general UK plants more commonly face knowledge control boundaries related to plant ownership or control, while German plants more commonly face boundaries related to knowledge sharing and knowledge co-ordination between functional groups. Our empirical results emphasise the importance of the strategic management of innovation. Knowledge control boundaries – related to external ownership, group membership and decision making autonomy – have a weak negative influence on plants’ innovation outcomes. Strategic decisions relating to multifunctional working and networking are found to be more important in overcoming knowledge sharing and co-ordination boundaries. Knowledge sharing boundaries, related to plant or company boundaries, prove most important where a plant has no in-house R&D capability. Knowledge co-ordination boundaries related to functional or multi-functional working have strong but differential effects on different innovation output measures: functional boundaries increase product life in both countries, and in Germany maintaining functional boundaries is also associated with increased innovation intensity.

Innovation and export performance:evidence from UK and German manufacturing plants

Using comparable plant-level surveys we demonstrate significant differences between the determinants of export performance among the UK and German manufacturing plants. Product innovation, however measured, has a strong effect on the probability and propensity to export in both countries. Being innovative is positively related to export probability in both countries. In the UK the scale of plants’ innovation activity is also related positively to export propensity. In Germany, however, where levels of innovation intensity are higher but the proportion of sales attributable to new products is lower, there is some evidence of a negative relationship between the scale of innovation activity and export performance. Significant differences are identified between innovative and non-innovative plants, especially in their absorption of spill-over effects. Innovative UK plants are more effective in their ability to exploit spill-overs from the innovation activities of companies in the same sector. In Germany, by contrast, non-innovators are more likely to absorb regional and supply-chain spill-over effects. Co-location to other innovative firms is generally found to discourage exporting.

The determinants of export performance:evidence for manufacturing plants in Ireland and Northern Ireland

The dramatic GDP and export growth of Ireland over the last decade forms a marked contrast with that of its nearest neighbour Northern Ireland. In Ireland, export volume growth averaged 15.5% p.a. from 1991 to 1999 compared with 6.3% from Northern Ireland. Using data on individual manufacturing plants this paper considers the determinants of export performance in the two areas. Larger, externally owned plants with higher skill levels are found to have the highest export propensities in both areas. Other influences (plant age, R&D, etc.) prove more strongly conditional on location, plant size, and ownership. Structural factors (e.g. ownership, industry) explain almost all of the difference in export propensity between larger plants in Northern Ireland and Ireland but only around one-third of that between smaller plants. Significant differences are also evident between plants in terms of their sources of new technology. For indigenously owned plants, inhouse R&D is important. For externally owned plants, R&D conducted elsewhere in the group - typically outside Ireland and Northern Ireland - proves more significant. This external dependency and lower than expected export propensity on the part of small plants in Northern Ireland represent significant policy challenges for the future.© 2006 Scottish Economic Society. Published by Blackwell Publishing Ltd.

The organisation of innovation: collaboration, cooperation and multifunctional groups in UK and German manufacturing

Marked differences exist between the institutional and social context for innovation in the UK and Germany. The question addressed here is how these different contexts affect the objectives and organisation of innovation in UK and German manufacturing. In particular, the paper examines the extent to which UK and German plants engage in inter-plant collaboration and cooperation and multifunctional working as part of their innovative activity, and explores the reasons for differences in these patterns of involvement. The investigation is based on a large-scale, comparative survey of manufacturing plants in the two countries. In Germany, institutional and social norms are found to encourage collaborative inter-plant innovation, but aspects of the German skills training and industrial relations systems make the adoption of more flexible internal systems more difficult. In the UK, by contrast, the more adversarial nature of inter-firm relations makes it more difficult to establish external collaborations based on mutual trust, but less restrictive labour market structures make it easier for UK plants to adopt multifunctional working. This is linked to differences in attitudes to the property rights and transaction cost problems inherent in innovation.

Introduction: improving manufacturing performance through technology diffusion, implementation and management

The role of technology management in achieving improved manufacturing performance has been receiving increased attention as enterprises are becoming more exposed to competition from around the world. In the modern market for manufactured goods the demand is now for more product variety, better quality, shorter delivery and greater flexibility, while the financial and environmental cost of resources has become an urgent concern to manufacturing managers. This issue of the International Journal of Technology Management addresses the question of how the diffusion, implementation and management of technology can improve the performance of manufacturing industries. The authors come from a large number of different countries and their contributions cover a wide range of topics within this general theme. Some papers are conceptual, others report on research carried out in a range of different industries including steel production, iron founding, electronics, robotics, machinery, precision engineering, metal working and motor manufacture. In some cases they describe situations in specific countries. Several are based on presentations made at the UK Operations Management Association's Sixth International Conference held at Aston University at which the conference theme was 'Achieving Competitive Edge: Getting Ahead Through Technology and People'. The first two papers deal with questions of advanced manufacturing technology implementation and management. Firstly Beatty describes a three year longitudinal field study carried out in ten Canadian manufacturing companies using CADICAM and CIM systems. Her findings relate to speed of implementation, choice of system type, the role of individuals in implementation, organization and job design. This is followed by a paper by Bessant in which he argues that a more a strategic approach should be taken towards the management of technology in the 1990s and beyond. Also considered in this paper are the capabilities necessary in order to deploy advanced manufacturing technology as a strategic resource and the way such capabilities might be developed within the firm. These two papers, which deal largely with the implementation of hardware, are supplemented by Samson and Sohal's contribution in which they argue that a much wider perspective should be adopted based on a new approach to manufacturing strategy formulation. Technology transfer is the topic of the following two papers. Pohlen again takes the case of advanced manufacturing technology and reports on his research which considers the factors contributing to successful realisation of AMT transfer. The paper by Lee then provides a more detailed account of technology transfer in the foundry industry. Using a case study based on a firm which has implemented a number of transferred innovations a model is illustrated in which the 'performance gap' can be identified and closed. The diffusion of technology is addressed in the next two papers. In the first of these, by Lowe and Sim, the managerial technologies of 'Just in Time' and 'Manufacturing Resource Planning' (or MRP 11) are examined. A study is described from which a number of factors are found to influence the adoption process including, rate of diffusion and size. Dahlin then considers the case of a specific item of hardware technology, the industrial robot. Her paper reviews the history of robot diffusion since the early 1960s and then tries to predict how the industry will develop in the future. The following two papers deal with the future of manufacturing in a more general sense. The future implementation of advanced manufacturing technology is the subject explored by de Haan and Peters who describe the results of their Dutch Delphi forecasting study conducted among a panel of experts including scientists, consultants, users and suppliers of AMT. Busby and Fan then consider a type of organisational model, 'the extended manufacturing enterprise', which would represent a distinct alternative pure market-led and command structures by exploiting the shared knowledge of suppliers and customers. The three country-based papers consider some strategic issues relating manufacturing technology. In a paper based on investigations conducted in China He, Liff and Steward report their findings from strategy analyses carried out in the steel and watch industries with a view to assessing technology needs and organizational change requirements. This is followed by Tang and Nam's paper which examines the case of machinery industry in Korea and its emerging importance as a key sector in the Korean economy. In his paper which focuses on Venezuela, Ernst then considers the particular problem of how this country can address the problem of falling oil revenues. He sees manufacturing as being an important contributor to Venezuela's future economy and proposes a means whereby government and private enterprise can co-operate in development of the manufacturing sector. The last six papers all deal with specific topics relating to the management manufacturing. Firstly Youssef looks at the question of manufacturing flexibility, introducing and testing a conceptual model that relates computer based technologies flexibility. Dangerfield's paper which follows is based on research conducted in the steel industry. He considers the question of scale and proposes a modelling approach determining the plant configuration necessary to meet market demand. Engstrom presents the results of a detailed investigation into the need for reorganising material flow where group assembly of products has been adopted. Sherwood, Guerrier and Dale then report the findings of a study into the effectiveness of Quality Circle implementation. Stillwagon and Burns, consider how manufacturing competitiveness can be improved individual firms by describing how the application of 'human performance engineering' can be used to motivate individual performance as well as to integrate organizational goals. Finally Sohal, Lewis and Samson describe, using a case study example, how just-in-time control can be applied within the context of computer numerically controlled flexible machining lines. The papers in this issue of the International Journal of Technology Management cover a wide range of topics relating to the general question of improving manufacturing performance through the dissemination, implementation and management of technology. Although they differ markedly in content and approach, they have the collective aim addressing the concepts, principles and practices which provide a better understanding the technology of manufacturing and assist in achieving and maintaining a competitive edge.

The Generalized Malmquist index and capacity utilization change: an application to the Italian manufacturing, 1989-1994

Several indices of plant capacity utilization based on the concept of best practice frontier have been proposed in the literature (Fare et al. 1992; De Borger and Kerstens, 1998). This paper suggests an alternative measure of capacity utilization change based on Generalized Malmquist index, proposed by Grifell-Tatje' and Lovell in 1998. The advantage of this specification is that it allows the measurement of productivity growth ignoring the nature of scale economies. Afterwards, this index is used to measure capacity change of a panel of Italian firms over the period 1989-94 using Data Envelopment Analysis and then its abilities of explaining the short-run movements of output are assessed.

A knowledge-based system for process planning in a seamless steel tube plant

The thesis describes the work carried out to develop a prototype knowledge-based system 'KBS-SETUPP' to generate process plans for the manufacture of seamless tubes. The work is specifically related to a plant in which hollows are made from solid billets using a rotary piercing process and then reduced to required size and finished properties using the fixed plug cold drawing process. The thesis first discusses various methods of tube production in order to give a general background of tube manufacture. Then a review of the automation of the process planning function is presented in terms of its basic sub-tasks and the techniques and suitability of a knowledge-based system is established. In the light of such a review and a case study, the process planning problem is formulated in the domain of seamless tube manufacture, its basic sub-tasks are identified and capabilities and constraints of the available equipment in the specific plant are established. The task of collecting and collating the process planning knowledge in seamless tube manufacture is discussed and is mostly fulfilled from domain experts, analysing of existing manufacturing records specific to plant, textbooks and applicable Standards. For the cold drawing mill, tube-drawing schedules have been rationalised to correspond with practice. The validation of such schedules has been achieved by computing the process parameters and then comparing these with the drawbench capacity to avoid over-loading. The existing models cannot be simulated in the computer program as such, therefore a mathematical model has been proposed which estimates the process parameters which are in close agreement with experimental values established by other researchers. To implement the concepts, a Knowledge-Based System 'KBS- SETUPP' has been developed on Personal Computer using Turbo- Prolog. The system is capable of generating process plans, production schedules and some additional capabilities to supplement process planning. The system generated process plans have been compared with the actual plans of the company and it has been shown that the results are satisfactory and encouraging and that the system has the capabilities which are useful.

Aspects of the design and operation of production control systems in manufacturing industry

Computerised production control developments have concentrated on Manufacturing Resources Planning (MRP II) systems. The literature suggests however, that despite the massive investment in hardware, software and management education, successful implementation of such systems in manufacturing industries has proved difficult. This thesis reviews the development of production planning and control systems, in particular, investigates the causes of failures in implementing MRP/MRP II systems in industrial environments and argues that the centralised and top-down planning structure, as well as the routine operational methodology of such systems, is inherently prone to failure. The thesis reviews the control benefits of cellular manufacturing systems but concludes that in more dynamic manufacturing environments, techniques such as Kanban are inappropriate. The basic shortcomings of MRP II systems are highlighted and a new enhanced operational methodology based on distributed planning and control principles is introduced. Distributed Manufacturing Resources Planning (DMRP), was developed as a capacity sensitive production planning and control solution for cellular manufacturing environments. The system utilises cell based, independently operated MRP II systems, integrated into a plant-wide control system through a Local Area Network. The potential benefits of adopting the system in industrial environments is discussed and the results of computer simulation experiments to compare the performance of the DMRP system against the conventional MRP II systems presented. DMRP methodology is shown to offer significant potential advantages which include ease of implementation, cost effectiveness, capacity sensitivity, shorter manufacturing lead times, lower working in progress levels and improved customer service.

Manufacturing organisation in developing countries with particular reference to Iraq

Industrially developed countries are able to absorb modern techniques of science and technology quite readily; this is not the case for less-developed countries. Attempts made by developing countries have been ineffective due to factors not readily admitted. This thesis highlights the areas that need to be developed by under-developed countries, and covers economic, scientific and technological, and social aspects as well as technology transfer. Economic areas considered acknowledge that within any one country there should be proper procedures for planning economic and industrial projects (plant design) supported by efficient economic development strategy. Scientific and technological factors considered include the major areas that need to be developed in order to produce and/or deal with scientific and technological issues for the interest of the national development. Technology transfer areas considered include the necessity of building up a national body (system) responsible for dealing with activities and tasks of transferring foreign-made technology so that it can be employed effectively within the environment of the country. Social factors considered include the need to develop human resources which can be employed efficiently into the whole process of development, and particularly for the above proposed systems. Education and training are the major elements that ought to be tackled to produce skilled manpower and to overcome the social and cultural values and traditions that are inherited by the society. This thesis highlights the above areas in an attempt to plan and organise the development of science and technology, and their implementation into the development as a whole. Whilst recognising the problems of creating this sort of development in developing countries, the author considers the benefits to be obtained are much greater in the long run.