Case Study of Applied LIP Approach/Activities in the Philippines The Training Services Enhancement Project for Rural Life Improvement (TSEP-RLI) Experience

TSEP-RLI was a technical cooperation project jointly conducted by GOP thru DA-Agricultural Training Institute (ATI) and GOJ thru JICA aimed at institutionalizing the training program for Rural Life Improvement (RLI) at the (ATI). As expected, farmers, fisherfolk, women, youth and extension agents were provided with efficient and effective training services from ATI leading to the improvement of quality of life in the rural areas through efforts of human resource development. The ATI- Bohol was chosen as the model center where participatory trials and various activities of the project were undertaken for five years. These activities were participatory surveys and data collection of on-farm and off-farm productive activities; planning workshop for RLI; feedbacking of survey results and action plans to the community and the Local Government Units (LGUs), and signing of Memorandum of Agreement between the Project and participating LGUs. The above activities were done to facilitate the planning and development of most effective and necessary rural life improvement activities, to confirm the willingness of the people to support and participate and to formalize the partnership between the Project and the LGUs. Since the concept of rural life covers a vast range of activities, a consensus had been reached that the total aspects of rural life be grasped in three spheres, namely, Production & Livelihood (P/L), Rural Living Condition (RLC) and Community Environment (C/E). The RLI for Ubi (Yam) Growers was one of the pilot activities undertaken in two pilot barangays and the target beneficiaries were members of the Rural Improvement Club (RIC- a group of organized women) with the LGU of the Municipality of Corella as the implementing partner. During the planning workshop, the barangay residents articulated their desire to promote production and processing of ubi (sphere on P/L - as the entry point), lack of nutritious food was one of the identified problem (sphere on RLC- expansion point) and environmental degradation such as deforestation, and soil erosion was another problem articulated by the community people (sphere on C/E- expansion point). Major activities that were undertaken namely, Ubi cooking contest, cooking/processing seminar, training courses on entrepreneurial development, ubi production and storage technology, packaging and product design, human resource development and simplified bookkeeping motivated the beneficiaries as well as developed and enhanced their skills & capabilities while strengthening their associations. Their participation to the 5 ubi festivals and other related activities had brought some impacts on their economic and rural life improvement activities. The seven principles of TSEP-RLI include the participatory process, holistic approach, dialogical approach, bottom -up training needs assessment, demand-driven approach, cost sharing approach and collaborative implementation with other agencies including LGUs and the community.

Caracterización de la agitación local y la respuesta oscilatoria de un buque mediante el uso de técnicas de visión artificial : aplicación al análisis de los umbrales operativos en líneas de atraque y amarre

El desarrollo de actividades de carga y descarga son parte de la esencia de la naturaleza funcional de un puerto, de las cuales derivan en gran medida los ingresos del mismo y la eficiencia de la cadena logística en su conjunto. Las oscilaciones en el interior de una dársena y en un línea de atraque disminuyen la calidad de la estancia de las embarcaciones en puerto, reducen el rendimiento de la estiba de los buques y solicitan y fatigan las estructuras y los cuerpos flotantes amarrados. Si los parámetros que definen la agitación local se aproximan a regiones de fallo 0 parada, el subsistema pierde rendimiento, fiabilidad y finalmente se paralizan las operaciones, produciéndose de este modo tiempos de inactividad. Estas paradas operativas conllevan pérdidas económicas para la terminal y, consecuentemente, para el puerto. Hoy día se dispone vastas redes de monitorización destinadas a la caracterización del medio físico en el entorno de los puertos. Paralelamente, las operaciones de manipulación de cargas en las terminales se están dirigiendo hacia modelos de automatización o semi automatización, que permiten no sólo la sistematización de procesos, sino también un profundo conocimiento del flujo de tareas. En este contexto hay un déficit de información sobre cómo afectan los diferentes forzadores del medio físico al rendimiento, la seguridad funcionalidad del proceso de manipulación de carga y descarga. Esto se debe en gran medida a la falta de registros dilatados en el tiempo que permitan correlacionar todos los aspectos mencionados de un modo particularizado para cada línea de atraque y amarre de un puerto. En esta tesis se desarrolla una metodología de vídeo monitorización no intrusiva y de bajo coste basada en la aplicación de técnicas "pixel tool' y la obtención de los parámetros extrínsecos de una observación monofocal. Con ello pretende poner en valor las infraestructuras de vídeo vigilancia de los puertos y de los laboratorios de experimentación a escala reducida, con el objeto de facilitar el estudio los umbrales operativos de las áreas de atraque y amarre. The development of loading and unloading activities is an essential part of he functional nature of a port, which derive largely from he same income and the efficiency of he supply chain as a whole. The oscillations inside a dock and a mooring line diminish he quality of the stay of vessels in port reducing the performance of the stowage of ship and asking and fatigued structures and moored floating bodies. If the parameters defining the local al agitation regions are close to areas of failure or shutdown, he subsystem looses performance, reliability and eventually paralyzes the operations, thereby producing downtime. These operational stops entail economic 1osses to the terminal and, consequently for the port. Today vast networks of monitoring, aimed at he characterization of the physical environment in the vicinity of he ports, are available. In parallel, the cargo handling operations at terminals are moving towards automation or semi-automation models that allow not only the systematization of processes, but also a deep understanding of he workflow. In this context, there is a lack of information about how the different forcing agents of the physical environment affect the performance and he functional safety of the loading and unloading process. This is due largely to the lack of spread-over-time records which would allow to correlate all aspects mentioned, specifically, for each berthing and mooring of a port. This thesis develops a methodology for non-intrusive and low cost monitoring video based on the application of "pixel tool" techniques and on obtaining the extrinsic parameters of a monofocal observation. It seeks an enhancement of the video monitoring infrastructure at ports and at experimental laboratories of reduced scale, in order to facilitate the study of operational thresholds berthing and mooring areas.

Refined method of potential enhancement in the equilibria characterization of activated carbon. Comparison with GCMC and DFT

In this paper, we present a technique for equilibria characterization of activated carbon having slit-shaped pores. This method was first developed by Do (Do, D. D. A new method for the characterisation of micro-mesoporous materials. Presented at the International Symposium on New Trends in Colloid and Interface Science, September 24-26, 1998 Chiba, Japan) and applied by his group and other groups for characterization of pore size distribution (PSD) as well as adsorption equilibria determination of a wide range of hydrocarbons. It is refined in this paper and compared with the grand canonical Monte Carlo (GCMG) simulation and density functional theory (DFT). The refined theory results in a good agreement between the pore filling pressure versus pore width and those obtained by GCMG and DFT. Furthermore, our local isotherms are qualitatively in good agreement with those obtained by the GCMC simulations. The main advantage of this method is that it is about 4 orders of magnitude faster than the GCMC simulations, making it suitable for optimization studies and design purposes. Finally, we apply our method and the GCMG in the derivation of the PSD of a commercial activated carbon. It was found that the PSD derived from our method is comparable to that derived from the GCMG simulations.

Enhancement of hydrogen physisorption on single-walled carbon nanotubes resulting from defects created by carbon bombardment

The defect effect on hydrogen adsorption on single-walled carbon nanotubes (SWNTs) has been studied by using extensive molecular dynamics simulations and density functional theory (DFT) calculations. It indicates that the defects created on the exterior wall of the SWNTs by bombarding the tube wall with carbon atoms and C-2 dimers at a collision energy of 20 eV can enhance the hydrogen adsorption potential of the SWNTs substantially. The average adsorption energy for a H-2 molecule adsorbed on the exterior wall of a defected (10,10) SWNT is similar to 150 meV, while that for a H-2 molecule adsorbed on the exterior wall of a perfect (10,10) SWNT is similar to 104 meV. The H-2 sticking coefficient is very sensitive to temperature, and has a maximum value around 70 to 90 K. The electron density contours, the local density of states, and the electron transfers obtained from the DFT calculations clearly indicate that the H-2 molecules are all physisorbed on the SWNTs. At temperatures above 200 K, most of the H-2 molecules adsorbed on the perfect SWNT are soon desorbed, but the H-2 molecules can still remain on the defected SWNTs at 300 K. The detailed processes of H-2 molecules adsorbing on and desorbing from the (10,10) SWNTs are demonstrated.

Enhancement of wireless networks with heterogeneous antennas

In recent years, wireless communication infrastructures have been widely deployed for both personal and business applications. IEEE 802.11 series Wireless Local Area Network (WLAN) standards attract lots of attention due to their low cost and high data rate. Wireless ad hoc networks which use IEEE 802.11 standards are one of hot spots of recent network research. Designing appropriate Media Access Control (MAC) layer protocols is one of the key issues for wireless ad hoc networks. ^ Existing wireless applications typically use omni-directional antennas. When using an omni-directional antenna, the gain of the antenna in all directions is the same. Due to the nature of the Distributed Coordination Function (DCF) mechanism of IEEE 802.11 standards, only one of the one-hop neighbors can send data at one time. Nodes other than the sender and the receiver must be either in idle or listening state, otherwise collisions could occur. The downside of the omni-directionality of antennas is that the spatial reuse ratio is low and the capacity of the network is considerably limited. ^ It is therefore obvious that the directional antenna has been introduced to improve spatial reutilization. As we know, a directional antenna has the following benefits. It can improve transport capacity by decreasing interference of a directional main lobe. It can increase coverage range due to a higher SINR (Signal Interference to Noise Ratio), i.e., with the same power consumption, better connectivity can be achieved. And the usage of power can be reduced, i.e., for the same coverage, a transmitter can reduce its power consumption. ^ To utilizing the advantages of directional antennas, we propose a relay-enabled MAC protocol. Two relay nodes are chosen to forward data when the channel condition of direct link from the sender to the receiver is poor. The two relay nodes can transfer data at the same time and a pipelined data transmission can be achieved by using directional antennas. The throughput can be improved significant when introducing the relay-enabled MAC protocol. ^ Besides the strong points, directional antennas also have some explicit drawbacks, such as the hidden terminal and deafness problems and the requirements of retaining location information for each node. Therefore, an omni-directional antenna should be used in some situations. The combination use of omni-directional and directional antennas leads to the problem of configuring heterogeneous antennas, i e., given a network topology and a traffic pattern, we need to find a tradeoff between using omni-directional and using directional antennas to obtain a better network performance over this configuration. ^ Directly and mathematically establishing the relationship between the network performance and the antenna configurations is extremely difficult, if not intractable. Therefore, in this research, we proposed several clustering-based methods to obtain approximate solutions for heterogeneous antennas configuration problem, which can improve network performance significantly. ^ Our proposed methods consist of two steps. The first step (i.e., clustering links) is to cluster the links into different groups based on the matrix-based system model. After being clustered, the links in the same group have similar neighborhood nodes and will use the same type of antenna. The second step (i.e., labeling links) is to decide the type of antenna for each group. For heterogeneous antennas, some groups of links will use directional antenna and others will adopt omni-directional antenna. Experiments are conducted to compare the proposed methods with existing methods. Experimental results demonstrate that our clustering-based methods can improve the network performance significantly. ^

Fetal-maternal interface impedance parallels local NADPH oxidase related superoxide production

Blood flow assessment employing Doppler techniques is a useful procedure in pregnancy evaluation, as it may predict pregnancy disorders coursing with increased uterine vascular impedance, as pre-eclampsia. While the local causes are unknown, emphasis has been put on reactive oxygen species (ROS) excessive production. As NADPH oxidase (NOX) is a ROS generator, it is hypothesized that combining Doppler assessment with NOX activity might provide useful knowledge on placental bed disorders underlying mechanisms. A prospective longitudinal study was performed in 19 normal course, singleton pregnancies. Fetal aortic isthmus (AoI) and maternal uterine arteries (UtA) pulsatility index (PI) were recorded at two time points: 20-22 and 40-41 weeks, just before elective Cesarean section. In addition, placenta and placental bed biopsies were performed immediately after fetal extraction. NOX activity was evaluated using a dihydroethidium-based fluorescence method and associations to PI values were studied with Spearman correlations. A clustering of pregnancies coursing with higher and lower PI values was shown, which correlated strongly with placental bed NOX activity, but less consistently with placental tissue. The study provides evidence favoring that placental bed NOX activity parallels UtA PI enhancement and suggests that an excess in oxidation underlies the development of pregnancy disorders coursing with enhanced UtA impedance.

Using a voxel-based krogh cylinder array to simulate microvascular contrast enhancement

The goal of this study is to better simulate microscopic and voxel-based dynamic contrast enhancement in magnetic resonance imaging. Specifically, errors imposed by the traditional two-compartment model are reduced by introducing a novel Krogh cylinder network. The two-compartment model was developed for macroscopic pharmacokinetic analysis of dynamic contrast enhancement and generalizing it to voxel dimensions, due to the significant decrease in scale, imposes physiologically unrealistic assumptions. In the project, a system of microscopic exchange between plasma and extravascular-extracellular space is built while numerically simulating the local contrast agent flow between and inside image elements. To do this, tissue parameter maps were created, contrast agent was introduced to the tissue via a flow lattice, and various data sets were simulated. The effects of sources, tissue heterogeneity, and the contribution of individual tissue parameters to an image are modeled. Further, the study attempts to demonstrate the effects of a priori flow maps on image contrast, indicating that flow data is as important as permeability data when analyzing tumor contrast enhancement. In addition, the simulations indicate that it may be possible to obtain tumor-type diagnostic information by acquiring both flow and permeability data.

Transmission electron tomography: quality assessment and enhancement for three-dimensional imaging of nanostructures

Nanotechnology has revolutionised humanity's capability in building microscopic systems by manipulating materials on a molecular and atomic scale. Nan-osystems are becoming increasingly smaller and more complex from the chemical perspective which increases the demand for microscopic characterisation techniques. Among others, transmission electron microscopy (TEM) is an indispensable tool that is increasingly used to study the structures of nanosystems down to the molecular and atomic scale. However, despite the effectivity of this tool, it can only provide 2-dimensional projection (shadow) images of the 3D structure, leaving the 3-dimensional information hidden which can lead to incomplete or erroneous characterization. One very promising inspection method is Electron Tomography (ET), which is rapidly becoming an important tool to explore the 3D nano-world. ET provides (sub-)nanometer resolution in all three dimensions of the sample under investigation. However, the fidelity of the ET tomogram that is achieved by current ET reconstruction procedures remains a major challenge. This thesis addresses the assessment and advancement of electron tomographic methods to enable high-fidelity three-dimensional investigations. A quality assessment investigation was conducted to provide a quality quantitative analysis of the main established ET reconstruction algorithms and to study the influence of the experimental conditions on the quality of the reconstructed ET tomogram. Regular shaped nanoparticles were used as a ground-truth for this study. It is concluded that the fidelity of the post-reconstruction quantitative analysis and segmentation is limited, mainly by the fidelity of the reconstructed ET tomogram. This motivates the development of an improved tomographic reconstruction process. In this thesis, a novel ET method was proposed, named dictionary learning electron tomography (DLET). DLET is based on the recent mathematical theorem of compressed sensing (CS) which employs the sparsity of ET tomograms to enable accurate reconstruction from undersampled (S)TEM tilt series. DLET learns the sparsifying transform (dictionary) in an adaptive way and reconstructs the tomogram simultaneously from highly undersampled tilt series. In this method, the sparsity is applied on overlapping image patches favouring local structures. Furthermore, the dictionary is adapted to the specific tomogram instance, thereby favouring better sparsity and consequently higher quality reconstructions. The reconstruction algorithm is based on an alternating procedure that learns the sparsifying dictionary and employs it to remove artifacts and noise in one step, and then restores the tomogram data in the other step. Simulation and real ET experiments of several morphologies are performed with a variety of setups. Reconstruction results validate its efficiency in both noiseless and noisy cases and show that it yields an improved reconstruction quality with fast convergence. The proposed method enables the recovery of high-fidelity information without the need to worry about what sparsifying transform to select or whether the images used strictly follow the pre-conditions of a certain transform (e.g. strictly piecewise constant for Total Variation minimisation). This can also avoid artifacts that can be introduced by specific sparsifying transforms (e.g. the staircase artifacts the may result when using Total Variation minimisation). Moreover, this thesis shows how reliable elementally sensitive tomography using EELS is possible with the aid of both appropriate use of Dual electron energy loss spectroscopy (DualEELS) and the DLET compressed sensing algorithm to make the best use of the limited data volume and signal to noise inherent in core-loss electron energy loss spectroscopy (EELS) from nanoparticles of an industrially important material. Taken together, the results presented in this thesis demonstrates how high-fidelity ET reconstructions can be achieved using a compressed sensing approach.

Survey of demographic and phenotypic data of local pig breeds of Treasure Project

Local genetic resources represent an important reservoir of biodiversity in the animal sector. Sustainable use of these resources can be an important source of income for farmers taking advantage of the peculiar characteristics of their products. The different European local pig breeds have a different level of knowledge of their characteristics both at demographic and phenotypic level. This information, however, is fundamental to the management of the breeds and represent one of the first steps in a project for the enhancement of production. This paper reports the results of a survey on the demographic and phenotypic characterization of the 20 European local pig breeds involved in the TREASURE* project. The first part of the survey shows, for all populations involved, the available demographic parameters, the structure of the breed (i.e. number of males, females and replacements), the main morphological features, the reproductive information as well as some additional information collected at herd-level (i.e. temperament, holding, mating practices). A second module reports the results related to the origins and development of the breeds, to market characteristics and the presence and distribution of niche products. The survey concludes with a module related to the specific characteristics of each breed and the management of the same in relation to food and the environment. The survey is the starting point of the genetic and productive characterization of the breeds involved that are future actions of the TREASURE project.