Post-disaster reconstruction projects : a logical framework for community participation

In a post-disaster environment, housing reconstruction projects frequently face enormous difficulties due to the various, often apparently ill-considered, internal and external factors. Non-Governmental Organisations (NGOs) operating in post-disaster settings such as in Afghanistan continue to face blame over the failure of reconstruction projects, and worse, they are sometimes even viewed as being corrupt entities. While it is not always possible for NGOs to eliminate or reduce the impact of factors that are outside their control, they certainly can increase the chances of project success by placing considerable emphasis on working more effectively with the affected communities. To achieve maximum community participation in reconstruction projects , this research develops a specific logical framework to guide the process of community participation in post-disaster housing reconstruction in Afghanistan.

A comparison of techniques for the reconstruction of leaf surfaces from scanned data

The foliage of a plant performs vital functions. As such, leaf models are required to be developed for modelling the plant architecture from a set of scattered data captured using a scanning device. The leaf model can be used for purely visual purposes or as part of a further model, such as a fluid movement model or biological process. For these reasons, an accurate mathematical representation of the surface and boundary is required. This paper compares three approaches for fitting a continuously differentiable surface through a set of scanned data points from a leaf surface, with a technique already used for reconstructing leaf surfaces. The techniques which will be considered are discrete smoothing D2-splines [R. Arcangeli, M. C. Lopez de Silanes, and J. J. Torrens, Multidimensional Minimising Splines, Springer, 2004.], the thin plate spline finite element smoother [S. Roberts, M. Hegland, and I. Altas, Approximation of a Thin Plate Spline Smoother using Continuous Piecewise Polynomial Functions, SIAM, 1 (2003), pp. 208--234] and the radial basis function Clough-Tocher method [M. Oqielat, I. Turner, and J. Belward, A hybrid Clough-Tocher method for surface fitting with application to leaf data., Appl. Math. Modelling, 33 (2009), pp. 2582-2595]. Numerical results show that discrete smoothing D2-splines produce reconstructed leaf surfaces which better represent the original physical leaf.

Surface reconstruction of wheat leaf morphology from three-dimensional scanned data

Realistic virtual models of leaf surfaces are important for a number of applications in the plant sciences, such as modelling agrichemical spray droplet movement and spreading on the surface. In this context, the virtual surfaces are required to be sufficiently smooth to facilitate the use of the mathematical equations that govern the motion of the droplet. While an effective approach is to apply discrete smoothing D2-spline algorithms to reconstruct the leaf surfaces from three-dimensional scanned data, difficulties arise when dealing with wheat leaves that tend to twist and bend. To overcome this topological difficulty, we develop a parameterisation technique that rotates and translates the original data, allowing the surface to be fitted using the discrete smoothing D2-spline methods in the new parameter space. Our algorithm uses finite element methods to represent the surface as a linear combination of compactly supported shape functions. Numerical results confirm that the parameterisation, along with the use of discrete smoothing D2-spline techniques, produces realistic virtual representations of wheat leaves.

Responsible reconstruction : The architect's role

This paper investigates the role of the architect in post-disaster reconstruction and questions their ability to facilitate per- manent building solutions. There is an ever-increasing population of refugees and internally displaced persons due to disasters and conflicts who have a basic need for shelter. To date, housing solutions for such people has tended to focus on short-term, temporary shelter solutions that have been largely unsuccessful. This increasing demand for shelter has led to an emerging group of architects skilled in post-disaster reconstruction. These architects acknowledge that shelter is critical to survival, but believe architects should focus on rebuilding in a manner that is quick, durable but permanent. They believe that an architect skilled in post-disaster reconstruction can produce solutions that meet the requirement of the emergency phase, through to semi-permanent and even permanent homes, without wasting time and money on interim shelters. Case Study Research was used to examine and evaluate the assistance provided by Emergency Architects Australia (EAA) to the Kei Gold community in the Solomon Islands after the 2007 earthquake and tsunami. The results indicate that an architect’s response to a disaster must go beyond providing temporary shelter; they must create permanent building solutions that respond to the site and the culture while servicing the needs of the communi- ty. The vernacular reconstruction methods implemented by EAA in Kei Gold Village have been successful in develop- ing permanent housing solutions. Further research and development is required to gain a broader understanding of the role of the architect in disasters of varying scales and typologies.

When the five giants of post war reconstruction meet the four pillars of welfare reform-young people lose out, again

This paper discusses proposed changes to the Australian welfare state in the Welfare Review chaired by Patrick McClure and launched by Kevin Andrews, Minister for Social Services in the Abbott government, in a recent address to the Sydney Institute. Andrews cited the Beveridge Report of 1942, referring to Lord William Beveridge as the “godfather of the British post-war welfare state”, commending him for putting forward a plan for a welfare state providing a minimal level of support, constituting a bare safety net, rather than “stifling civil society and personal responsibility” through generous provision. In line with a key TASA conference theme of challenging institutions and identifying social and political change at local and global levels, this paper examines both the Beveridge Report and the McClure Report, identifying key issues and themes of relevance to current times in Australia.

Cultural and linguistic localization of games to bridge the digital and cultural divide in indigenous populations

Localization of technology is now widely applied to the preservation and revival of the culture of indigenous peoples around the world, most commonly through the translation into indigenous languages, which has been proven to increase the adoption of technology. However, this current form of localization excludes two demographic groups, which are key to the effectiveness of localization efforts in the African context: the younger generation (under the age of thirty) with an Anglo- American cultural view who have no need or interest in their indigenous culture; and the older generation (over the age of fifty) who are very knowledgeable about their indigenous culture, but have little or no knowledge on the use of a computer. This paper presents the design of a computer game engine that can be used to provide an interface for both technology and indigenous culture learning for both generations. Four indigenous Ugandan games are analyzed and identified for their attractiveness to both generations, to both rural and urban populations, and for their propensity to develop IT skills in older generations.

Modeling kinect sensor noise for improved 3D reconstruction and tracking

We contribute an empirically derived noise model for the Kinect sensor. We systematically measure both lateral and axial noise distributions, as a function of both distance and angle of the Kinect to an observed surface. The derived noise model can be used to filter Kinect depth maps for a variety of applications. Our second contribution applies our derived noise model to the KinectFusion system to extend filtering, volumetric fusion, and pose estimation within the pipeline. Qualitative results show our method allows reconstruction of finer details and the ability to reconstruct smaller objects and thinner surfaces. Quantitative results also show our method improves pose estimation accuracy. © 2012 IEEE.

Magnetic resonance imaging: An accurate, radiation-free, alternative to computed tomography for the primary imaging and three-dimensional reconstruction of the bony orbit

Purpose: To determine the extent to which the accuracy of magnetic resonance imaging (MRI) based virtual 3-dimensional (3D) models of the intact orbit can approach that of the gold standard, computed tomography (CT) based models. The goal was to determine whether MRI is a viable alternative to CT scans in patients with isolated orbital fractures and penetrating eye injuries, pediatric patients, and patients requiring multiple scans in whom radiation exposure is ideally limited. Materials and Methods: Patients who presented with unilateral orbital fractures to the Royal Brisbane and Women’s Hospital from March 2011 to March 2012 were recruited to participate in this cross-sectional study. The primary predictor variable was the imaging technique (MRI vs CT). The outcome measurements were orbital volume (primary outcome) and geometric intraorbital surface deviations (secondary outcome)between the MRI- and CT-based 3D models. Results: Eleven subjects (9 male) were enrolled. The patients’ mean age was 30 years. On average, the MRI models underestimated the orbital volume of the CT models by 0.50 0.19 cm3 . The average intraorbital surface deviation between the MRI and CT models was 0.34 0.32 mm, with 78 2.7% of the surface within a tolerance of 0.5 mm. Conclusions: The volumetric differences of the MRI models are comparable to reported results from CT models. The intraorbital MRI surface deviations are smaller than the accepted tolerance for orbital surgical reconstructions. Therefore, the authors believe that MRI is an accurate radiation-free alternative to CT for the primary imaging and 3D reconstruction of the bony orbit. �

Tissue-engineered fibroin scaffolds for ocular tissue reconstruction

The silk protein fibroin (Bombyx mori) provides a potential substrate for use in ocular tissue reconstruction. We have previously demonstrated that transparent membranes produced from fibroin support cultivation of human limbal epithelial (HLE) cells (Tissue Eng A. 14(2008)1203-11). We extend this body of work to studies of limbal mesenchymal stromal cell (L-MSC) growth on fibroin. Also, we investigate the ability to produce a fibroin dual-layer scaffold with an upper HLE layer and lower L-MSC layer...

Catering for cultural and linguistic diversity: Using teacher created information texts

Teachers in the Pacific region have often signalled the need for more locally produced information texts in both the vernacular and English, to engage their readers with local content and to support literacy development across the curriculum. The Information Text Awareness Project (ITAP), initially informed by the work of Nea Stewart-Dore, has provided a means to address this need through supporting local teachers to write their own information texts. The article reports on the impact of an ITAP workshop carried out in Nadi, Fiji in 2012. Nine teacher volunteers from the project trialled the use of the texts in their classrooms with positive results in relation to student learning and belief in themselves as writers.

Additive tissue manufacturing for breast reconstruction: Combining CAD/CAM with adipose tissue engineering

The primary aim of this multidisciplinary project was to develop a new generation of breast implants. Disrupting the currently prevailing paradigm of silicone implants which permanently introduce a foreign body into mastectomy patients, highly porous implants developed as part of this PhD project are biodegradable by the body and augment the growth of natural tissue. Our technology platform leverages computer-assisted-design which allows us to manufacture fully patient-specific implants based on a personalised medicine approach. Multiple animal studies conducted in this project have shown that the polymeric implant slowly degrades within the body harmlessly while the body's own tissue forms concurrently.