924 resultados para lightener evaluation system tyrosinaseTYR
Resumo:
本论文由四部分组成。第一部分报道了佛手参提取物的化学成分研究,建立了活性成分含量测定的高效液相测定和指纹图谱研究,采用液质联用技术鉴定了主要色谱峰;第二部分报道了丹参及其复方制剂的特征图谱研究;第三部分探讨了两面针生物碱的电喷雾质谱裂解规律,并采用液质联用技术分离鉴定了提取物中的多种生物碱。第四部分概述了液质联用在药物代谢研究中的运用。 第一部分包括第一、第二和第三章。第一章针对佛手参(Gymnadeniaconopsea)块茎的甲醇提取物,采用大孔树脂和反相硅胶柱层析等各种分离方法,共分离鉴定出4 个化合物,通过波谱分析将它们的结构确定为dactylorhin B (1)、loroglossin (2)、dactylorhin A (3)和militarine (4)。这4 个化合物均是首次从佛手参中分离得到的琥珀酸葡萄糖苷类成分。第二章采用高效液相色谱法对西藏、四川、河北、青海和尼泊尔等不同地区产的十个佛手参样品进行腺嘌呤核苷和对羟基苯甲醇的定量分析,结果表明这2 个成份可视为佛手参的特征成分,但也注意到产地不同该2 个特征成分的含量也有所不同。第三章采用标准中药指纹图谱相似度计算软件,以10 个佛手参样品HPLC 图谱的平均值为相似性评价对照模板,对10 个样品进行了相似度评价,并经液质联用分析指认了7 个共有峰,分别为腺嘌呤核苷(1)、对羟基苯甲醇(2)、对羟基苯甲醛(3) 、dactylorhin B(4) 、loroglossin(5)、dactylorhin A(6)和militarine(7)。 第二部分包括第四、第五、第六和第七章。第四章运用电喷雾质谱检测了对照药材和五个不同产地的丹参药材中脂溶性和水溶性成分,系统地探讨了多种成分的电喷雾质谱规律,并以对照药材为标准建立了特征指纹图谱。五个产地的药II材通过与对照药材相对比,采用聚类分析的方法,得到了定性的鉴别与判断。并采用液质联用技术对丹参药材提取液中的化学成份进行分析,推测了九个特征峰,并对六样品的液相色谱图进行了聚类分析。第五章探讨了三七皂苷的电喷雾质谱电离和裂解规律,并采用电喷雾质谱法对三七标准药材,血通片中的皂苷成分进行了分析。第六章运用电喷雾质谱研究复方丹参片提取液的特征图谱,并和单味药材丹参和三七的特征图谱进行了对比研究。并运用HPLC-ESI MSn 分析鉴定了复方丹参片提取液中的化学成分,推测了12 个色谱峰。第七章总结了电喷雾质谱和液质联用技术在丹参药材,三七药材及复方丹参制剂中的运用的优势和局限性。 第三部分(第八章)研究了两面针生物碱中二氢白屈菜红碱(1)、二氢两面针碱(2)、8-酮基二氢白屈菜红碱(3)、8-丙酮基二氢两面针碱(4)、两面针碱(5)、和1,3-二(8-二氢两面针碱)丙酮(6)等六个苯并菲啶型生物碱的电喷雾质谱裂解规律,其中二氢两面针碱和二氢白屈菜红碱,8-丙酮基二氢两面针碱和8-酮基二氢白屈菜红碱是两对二个甲氧基分别在C-9 和C-10,C-10 和C-11 的同分异构体。实验结果表明,在相同的碰撞能下,这类位置异构体的ESI MS2 质谱二级碎片离子的相对峰度存在很大差异,这可以用于区分该类同分异构体,采用液-质联用可以对两面针的总生物碱提取物中的这些同分异构体加于区分。同时在本实验采用的液相色谱条件下,多种生物碱得到较好的分离,通过和对照品的保留时间,紫外吸收光谱及电喷雾质谱图对照,鉴定了11 个主要色谱峰。 第四部分(第九章)对液质联用技术在药物代谢中的运用进行了综述。 This dissertation consisted of four sections. The first two sections elaborated thephytochemical investigation of the rhizomes Gymnadenia conopsea R. Br., methoddevelopment for rapid identifying and qutifying the chemical condtituent of thistibetant medicine, and the chemical fingerprint analysis of rhizomes of G. conopsea,Salviae miltiorrhiza and P. notoginseng. The third section studied the fragmentationmechanism of six alkaloids from Zanthoxylum nitidium and method development forrapid identifying varieties of alkaloids from the extract of this herbal medicine. Thefourth section reviewed HPLC- MS method in drug metabolism studies. The first section consisted of chapters 1, 2, 3. Chapter 1 elaborated the phytochemicalinvestigation of Gymnadenia conopsea R. Br. Four succinate derivative esters wereisolated from the methanol extract of the rhizomes of G. conopsea through repeatedcolumn chromatography on normal and reversed phase silica gel, their structures weredetermined by ESI-MS, 1D and 2D NMR evidence. They were firstly discoveredfrom this species. In chapter 2, a high-performance liquid chromatography.diodearray detection (HPLC-DAD) method has been firstly developed for quantitation oftwo characteristic constituents, adenosine and 4-hydroxybenzyl alcohol, from theextract of rhizomes of G. conopsea. All 10 samples of G. conopsea contained differentamount of adenosine and 4-hydroxybenzyl alcohol. Adenosine and the4-hydroxybenzyl alcohol can be applied in identification and quality control for theroots of G. conopsea. In chapter 3, a high-performance liquid chromatography.diodearray detection.tandem mass spectrometry (HPLC-DAD-MSn) method has been firstly developed for chemical fingerprint analysis of rhizomes of G. conopsea andrapid identification of major compounds in the fingerprints. Comparing the UV andMS spectra with those of authentic compounds, seven main peaks in the fingerprintswere identified as adenosine, 4-hydroxybenzyl alcohol, 4-hydroxybenzyl aldehyde,dactylorhin B, loroglossin, dactylorhin A and militarine. The Computer AidedSimilarity Evaluation System for Chromatographic Fingerprint of TraditionalChinese Medicine (CASES) was employed to evaluate the similarities of 10 samplesof the rhizomes of G. conopsea collected from Sichuan, Qinghai and Hebei provincesand Tibet autonomous region of China, and Nepal. These samples from differentsources had similar chemical fingerprints to each other. The second section consisted of chapters 4, 5, 6 and 7. In chapter 4,both thecharacteristic spectra of liposoluble tanshinones and aqueous-soluble salvianolic acidswere established by the electrospray ionization mass spectrometry (ESI MS)technique and the differences between standard and crude rhizomes of Salviaemiltiorrhiza Bge. from 5 sources were analyzed. The law of electrospray ion trap mass(ESI ITMS) of typical tanshinones and salvianolic acids is studied.The analysis of the chemical constituent of rhizomes of Salviae miltiorrhiza Bge. byliquid chromatography coupled with mass spectrum (LC/MS) technique wasestablished,and the distances among standard herb and crude herb from 5 sourceswere calculated by clustering analysis. According the DAD spectra and MS2 data,9tanshinones could be speculated. In chapter 5, the character spectra of total saponinsin P. notoginseng extracts were established by ESI ITMS and selective ion monitoring(SIM) technology. The law of notoginsenosides by ESI MS2 was studied. In chapter 6,the characteristic spectra of Compound Danshen Tablet established and compared byESI-MS and HPLC/DAD/MS, 6 known tanshinones and 3 saponins were speculated.In chapter 7, the advantage and disadvantage of the strategy, using the ESI ITMS andLC/MS techniques for study of characteristic spetra of danshen and Compound Danshen Tablet, were summerized. The third section (chapter 8) studied the fragmentation mechanism of six alkaloids,dihydronitidine, dihydrochelerythrine, 8-acetonyl dihydronitidine,8-acetonyldrochelerythrine, nitidine and 1,3-bis (8-dihydronitidinyl)-acetone, by ESIMSn. Tandem mass spectrometry experiments indicated that different substitutionsites of the methoxyl groups at C-9 and C-10 or at C-10 and C-11 determined thedifferent abundances of the MS2 fragmentation ions using the same collision energy.According to the different abundances of MS2 product ions, positional isomericbenzo[c] phenanthridine alkaloids can be differentiated. Moreover, ten constituents inthe crude alkaloids extract from the roots of Zanthoxylum nitidium were rapidlyidentified by high-performance liquid chromatography coupled with tandem massspectrometry (HPLC-MSn), through comparing the retention times and ESI MSn spectra with the authentic standards. The fourth section (chapter 9) is a review on HPLC-MS method development in drug metabolism studies.
Resumo:
It is a basic work to ascertain the parameters of rock mass for evaluation about stability of the engineering. Anisotropism、inhomogeneity and discontinuity characters of the rock mass arise from the existing of the structural plane. Subjected to water、weathering effect、off-loading, mechanical characters of the rock mass are greatly different from rock itself, Determining mechanical parameters of the rock mass becomes so difficult because of structure effect、dimension effect、rheological character, ‘Can’t give a proper parameter’ becomes one of big problems for theoretic analysis and numerical simulation. With the increment of project scale, appraising the project rock mass and ascertaining the parameters of rock mass becomes more and more important and strict. Consequently, researching the parameters of rock mass has important theoretical significance and actual meaning. The Jin-ping hydroelectric station is the first highest hyperbolic arch dam in the world under construction, the height of the dam is about 305m, it is the biggest hydroelectric station at lower reaches of Yalong river. The length of underground factory building is 204.52m, the total height of it is 68.83m, the maximum of span clearance is 28.90m. Large-scale excavation in the underground factory of Jin-ping hydroelectric station has brought many kinds of destructive phenomenon, such as relaxation、spilling, providing a precious chance for study of unloading parameter about rock mass. As we all know, Southwest is the most important hydroelectric power base in China, the construction of the hydroelectric station mostly concentrate at high mountain and gorge area, basically and importantly, we must be familiar with the physical and mechanical character of the rock mass to guarantee to exploit safely、efficiently、quickly, in other words, we must understand the strength and deformation character of the rock mass. Based on enough fieldwork of geological investigation, we study the parameter of unloading rock mass on condition that we obtain abundant information, which is not only important for the construction of Jin-ping hydroelectric station, but also for the construction of other big hydroelectric station similar with Jin-ping. This paper adopt geological analysis、test data analysis、experience analysis、theory research and Artificial Neural Networks (ANN) brainpower analysis to evaluate the mechanical parameter, the major production is as follows: (1)Through the excavation of upper 5-layer of the underground powerhouse and the statistical classification of the main joints fractures exposed, We believe that there are three sets of joints, the first group is lay fracture, the second group and the fourth group are steep fracture. These provide a strong foundation for the following calculation of and analysis; (2)According to the in-situ measurement about sound wave velocity、displacement and anchor stress, we analyses the effects of rock unloading effect,the results show a obvious time-related character and localization features of rock deformation. We determine the depth of excavation unloading of underground factory wall based on this. Determining the rock mass parameters according to the measurement about sound wave velocity with characters of low- disturbing、dynamic on the spot, the result can really reflect the original state, this chapter approximately the mechanical parameters about rock mass at each unloading area; (3)Based on Hoek-Brown experienced formula with geological strength index GSI and RMR method to evaluate the mechanical parameters of different degree weathering and unloading rock mass about underground factory, Both of evaluation result are more satisfied; (4)From the perspective of far-field stress, based on the stress field distribution ideas of two-crack at any load conditions proposed by Fazil Erdogan (1962),using the strain energy density factor criterion (S criterion) proposed by Xue changming(1972),we establish the corresponding relationship between far-field stress and crack tip stress field, derive the integrated intensity criterion formula under the conditions of pure tensile stress among two line coplanar intermittent jointed rock,and establish the corresponding intensity criterion for the exploratory attempt; (5)With artificial neural network, the paper focuses on the mechanical parameters of rock mass that we concerned about and the whole process of prediction of deformation parameters, discusses the prospect of applying in assessment about the parameters of rock mass,and rely on the catalog information of underground powerhouse of Jinping I Hydropower Station, identifying the rock mechanics parameters intellectually,discusses the sample selection, network design, values of basic parameters and error analysis comprehensively. There is a certain significance for us to set up a set of parameters evaluation system,which is in construction of large-scale hydropower among a group of marble mass.
Resumo:
A mafic-ultramafic complex belt well developed in Eastern Tianshan, Xinjiang, NW China, which contains a series of Cu-Ni sulfide deposits. This area is the important production basis for Cu-Ni deposits, including Tulargen deposit, Hulu deposit, Huangshan-Huangshandong deposit, Hulu deposit, Xiangshan deposit, Tianyu deposit, Chuanzhu deposit. In China, especially Eastern Tianshan, it is prevalent that large Cu-Ni deposits occurred in small intrusions, typically including Jinchuan, Kalatongke, et al., so the ore-forming mechanism and evaluation rule for those small intrusions are very meaningful and of universal significance. On the basis of the research to typical Cu-Ni deposits, ore-forming conditions and processes are summarized through which to evaluate the ore-bearing potential for barren intrusions and unexplored mafic-ultramafic intrusions. By the contrast, metallogenic rule and mechanism of ore genesis are concluded, and evaluation system is preliminarily set up on the basis of these conclusions. Quantitatively simulation for the composition of olivine is introduced for the first time in China to discuss the interaction between magma and sulfide, and a new method to calculate the Mg-Fe composition of primitive magma is developed. Interaction between magma and sulfide liquid is used to get the Ni content in sulfide liquid. Sulfur isotopic characteristics in sulfide minerals in country rocks and ores are used to judge crustal sulfur introduction, which is applied for the first time in China. Re-Os isotopic characteristics are related to the ore-forming process, to interpret the process of enrichment of chalcophile elements. On the basis of the evaluation system, Mati, Chuanzhu, Luodong, Xiadong, those intrusions are evaluated to their ore-bearing potential. According to the studies to typical Cu-Ni deposits, conduit-type ore-forming model is set up, and the characteristics of the model are concluded systematically. The evaluation system and conduit-type ore-forming model can be helpful to the evaluation of mafic-ultramafic intrusions in this and similar mafic-ultramafic intrusion belts. The studied typical deposits and mafic-ultramafic intrusion include Tulargen deposit, Hulu deposit, Huangshandong deposit, Chuanzhu deposit, Mati intrusion,Luodong intrusion, Xiadong intrusion, and others. Through studies, there are similar characteristics for Tulargen and Hulu deposits in magma origin, composition of primitive magma(MgO=12.5%, FeO=12% and MgO=11%, FeO=10.5% respectively), magma evolution, mechanism of sulfide segregation and conduit-type ore-forming process. By Re-Os isotopic system, the ore forming date of Tulargen deposit is 265.6±9.2Ma, which is consistent to regional metallogenic event, but little younger. The Mg-Fe composition of primitive magma of Baishiquan, Huangshandong area, Kalatongke is lower than that of Tulargen and Hulu deposit, showing common basalt composition. The Mg# value(Mg#=(Mg/Mg+Fe)increases gradually from Kalatongke to Baishiquan to Huangshan-Huangshandong East. Baishiquan intrusions show relatively higher crustal contamination by evidence of trace element, which indicates the lower magma original source, from depleted mantle to crust. One break is the discovery of komatiitic intrusion, Xiadong intrusion, which shows characteristics of highly magnesium (Max Fo=96). The primitive magma is calculated of MgO=28%,FeO=9%, belonging to komatiitic magma. Tectonic evolution of Eastern Tianshan is discussed. By the statistics of ore-forming data of porphyry copper deposits, magmatic sulfide Cu-Ni deposits, orogenic hydrothermal gold deposits, we believe that those deposits are the successive products of oceanic subduction, are and back-arc basin collision and post-orogenic extention. And Cu-Ni sulfide deposits and orogenic gold deposits occurred in the stage of post-orogenic extention. According to the conclusions, the conduit-type ore-forming mechanism of magmatic sulfide deposit is set up, and its characteristics and conditions are concluded as well. The conduit-type ore-forming system includes magma generation, sulfide segregation, enrichment of chalcophile elements, interaction of sulfide and magma, sulfide collection in limited space in magma conduit and bottom of the chamber, which make a whole ore-forming system.The ore-forming process of Cu-Ni sulfide deposits is concluded as three steps: 1. mantle derived magma rises upward to the middle-upper crust; 2. magma suffers crustal contamination of different degrees and assimilates crustal sulfur, which leads to sulfur saturation and sulfide segregation. Sulfide liquid interacts with magma and concentrates chalcophile elements; 3. enriched sulfide located in the conduit(Tulargen) or bottom of the chamber (Hulu). Depleted magma rises upward continuously to form barren complexes. For the practical cases, Tulargen deposit represents the feeding conduit, and Hulu deposit represents the bottom of the staging magma chamber. So the deeper of west of Tulargen and southwest of Hulu are the favorite locate for ore location. The evaluation for ore potential can be summarized as follows: (1) Olivine can be served as indicator for magma evolution and events of sulfide segregation; (2) Sulfur isotopic characteristics is an efficient method to judge sulfur origin for magmatic sulfide deposit; (3) Re-Os content of the ores can indicate interaction between sulfide and silicate magma and crustal contamination; (4) PGE mineralization is effected by degree of partial melting of mantle; (5) Cu/Zr is efficient parameter to judge sulfide segregation; (6) The effects of multiple magma fractionation and emplacement are important, for inverse order shows the destruction to previous solid lithofacies and orebodies. Mati, Chuanzhu, Xiadong, Luodong, mafic-ultramafic intrusions are evaluated using evaluation system above. Remarkable Ni depletion is found in olivine of Mati, and southwest of the intrusion can be hopeful location for ore location. Chuanzhu intrusion has remarkable evidence of sulfide segregation, but the intrusion represents the narrow feeder conduit, so the wide part of the conduit maybe the favorite location for sulfide to deposit. The ore potential of Luodong and Xiadong is not good. Both the intrusions show no Ni depletion in olivine, and there is no sulfide in country rocks, so no crustal sulfur is added into the magmatic system. For Sidingheishan, a very large intrusion, the phenomenon of sulfide segregation is found, but there are no favorite places for sulfide to deposit. So the Cu-Ni ore potential maybe not good, but PGE mineralization should be evaluated further.
Resumo:
This research aims at the CEO's (chief executive officer) incentive-reward system and investigates 456 companies that have come into the market. The structure and level of agent reward are analyzed. And the problem in the incentive-reward mechanism is brought forward. The agent's payments are poor comparing to their contributions. And stock is not a primary incentive. Bonus compensation is still the dominant incentive means. By questionnaire and interview, it was fond that matriel need was rank first among these CEOs'needs. These foundinds indicate that the agents' payment is too poor to work as an effective incentive. The corporation's agent incentive is not enough in fact. The two reasons about this problem lie in our institutions and traditional opinions about commerce. To solve this matter, we must establish a scientific and reasonable evaluation system and incentive-reward system. At the same time, the market system and corporation management mechanism are absolutely need.
Resumo:
The quality of advertising copy is an important component of advertising service. An advertising system with only copy design and production but without evaluation is imperfect. Establishing an evaluation system of television advertising copy is the principal purpose of the present work. In terms of consumer behavior, the work focused on consumers' evaluation-in-general of T commercials. The research consisted of three subprograms. The first subprogrom was associated with the basic factors in the evaluation of television advertising copy. The second one was related to the relative importance of those basic factors. The last one was related to the way in which the consumers' synthetic evaluation of copy under multidimensions. These subprogram composed the evaluation system of television advertising copy. In the study of the first subprogram, by the use of a variaty of "multistage evaluation scale", a survey into consumers' evaluation-in-general of television ads was made, which obtained five factors, namely, credibility, attractiveness, suitability, cognition and affect impact, through factor analysis (Cum.Pct. = 56.2%, α = 0.84). The study of second subprogram acquired their relative weights by a popular method of weight in the area of decision analysis, the result was as followings: credibility-0.27, attractiveness-0.24, suitability-0.18, affect impact-0.16, cognition-0.15; and fanally, under the condition of quasi-experiment, the third studyestablished a mathematical model of the synthetic evaluation of television ad copy, which was expressed as O = ΣF * W, through a "synthetical" method of multidimensional decision making.
Resumo:
The Girolando breed progeny test was established in 1997, as a result of the partnership between Girolando and Embrapa Dairy Cattle. In 2007, the Programa de Melhoramento Genético da Raça Girolando? PMGG (Genetic Improvement Program of the Girolando Breed) was implemented. Besides interacting with previously existing initiatives of the Girolando Breeders Association, such as the genealogical register service, the progeny test and the dairy control service, the PMGG launched the Linear Evaluation System (SLAG). The main objectives of the PMGG comprises identification of genetically superior individuals, the technically-oriented multiplication of genetics, the evaluation of economic traits and the promotion of sustainable dairy activities. The program have yielded impressive results. The Girolando breed semen sales increases faster than any other breed in Brazil.
Resumo:
This paper reviews the background of green building, content and evaluation system, and on this basis, focuses on the development of the UK Green Building and the latest trends and development of green buildings in China's cause of enlightenment
Resumo:
As pessoas idosas são hospitalizadas com mais frequência e por períodos superiores por comparação com pessoas mais novas. A literatura indica que a interação entre idade, patologia e cuidados durante o internamento influencia a perceção de Qualidade de Vida (QV) pela pessoa idosa. Esta investigação analisa a influência da hospitalização na QV e espiritualidade das pessoas idosas e pretende contribuir para melhor compreender a hospitalização na velhice, ajudando a desenvolver medidas que promovam a qualidade dos cuidados a pessoas idosas durante a hospitalização. A amostra compreende 250 participantes (≥65 anos). Administrou-se o EASYcare (Sistema de Avaliação de Pessoas Idosas) e a Escala da Espiritualidade em 3 momentos: admissão, alta e follow-up (6 a 12 meses após a alta). Os principais resultados indicam: i) na admissão, as pessoas idosas mais dependentes tendem a ser viúvas, não praticar exercício físico, sentir-se sozinhas e deprimidas; os independentes tendem a estar mais satisfeitos com a sua habitação e a gerir de forma autónoma as suas finanças, apresentando maior escolaridade e sendo mais novos; ii) na alta, as pessoas idosas diminuem a perceção da qualidade de vida, principalmente com aumento da dependência, diminuição da saúde mental e bem-estar, diminuição da mobilidade e capacidade de cuidar de si; iii) no follow-up, os participantes tendem a ser mais dependentes comparativamente com a admissão; o risco de queda é menor comparativamente com os outros momentos. O modelo preditivo de óbitos indica como principais resultados: falecimento entre admissão e alta tem como fatores protetores rendimentos suficientes e ausência de apoio social; falecimento entre alta e follow-up tem como fatores de risco idade e risco de queda elevado; falecimento entre admissão e follow-up tem como fator protetor antecedentes clínicos do foro cardíaco. As conclusões gerais sustentam a importância do aprofundamento da pesquisa sobre a influência da hospitalização na pessoa idosa na sua qualidade de vida, e a adoção de medidas e estratégias para a promoção da QV durante e após o internamento hospitalar. Estes resultados têm implicações na prática e na elaboração de políticas institucionais, pois permite compreender o impacto da hospitalização nas pessoas idosas, permitindo desenvolver medidas para melhorar os cuidados antes, durante e após o internamento hospitalar. Este estudo permite conhecer as necessidades das pessoas idosas durante o internamento e delinear estratégias para o follow-up, sendo adaptado às especificidades da população idosa Portuguesa.
Resumo:
O Comité Técnico CEN/TC 350 “Sustainability of construction works” elaborou um conjunto de normas que propõem um sistema de avaliação do contributo da construção para o desenvolvimento sustentável, nomeadamente através da avaliação dos seus desempenhos ambiental, social e económico, baseado numa abordagem de ciclo de vida. Os sistemas de avaliação da sustentabilidade de edifícios têm um papel importante em todas as fases do ciclo de vida (anterior à utilização, utilização e fim de vida) de um edifício que se pretenda sustentável, pois agilizam a integração entre os aspetos ambientais, sociais e económicos com outros critérios de decisão. Esta dissertação tem como objetivo apresentar uma metodologia inovadora de avaliação sistemática do desempenho económico de edifícios dentro do conceito sustentabilidade, com base na análise do ciclo de vida, conforme estabelecido na EN 16627:2015, que descreve o processo de tomada de decisão e documentação da avaliação do desempenho económico de edifícios dentro do conceito da avaliação da sustentabilidade, com base na análise de ciclo de vida (ACV). A metodologia, intitulada “Methodology of Assessment of Economic Performance - Residential Buildings – MAEP-RB”, permite a avaliação do desempenho e da sustentabilidade económica de edifícios na fase anterior à utilização do ciclo de vida. A metodologia segue o princípio de modularidade, onde os aspetos e impactes que influenciam o desempenho económico do edifício durante as fases do seu ciclo de vida, são atribuídos aos indicadores de cada módulo do ciclo de vida em que eles ocorrem dentro da respectiva etapa. Faz parte integrante desta metodologia uma base de dados contendo um modelo de custos na construção baseado na subdivisão do edifício em sistemas, subsistemas, elementos, componentes e subcomponentes, em que este último se encontra ao nível dos recursos. Os resultados da avaliação do desempenho económico e da sustentabilidade económica são desagregados em vários níveis, ou seja, ao nível da fase anterior à utilização do ciclo de vida do edifício, de cada etapa, de cada módulo e de cada indicador económico. A MAEP-RB avalia simultaneamente o desempenho económico e a sustentabilidade económica de edifícios sendo o resultado do desempenho económico expresso em unidade monetária e o da sustentabilidade comunicado por um Índice de Sustentabilidade Económica (A+, A, B, C, D, E).
Resumo:
Tese de doutoramento, Educação (Supervisão e Orientação da Prática Profissional), Universidade de Lisboa, Instituto de Educação, 2014
Resumo:
Mestrado em Engenharia de Computação e Instrumentação Médica
Resumo:
As atuais políticas industriais procuram conjugar os objetivos económicos com direitos sociais e ambientais através da aplicação de políticas de desenvolvimento sustentável. A gestão coordenada destes três capítulos visa contribuir para o bem‐estar e progressiva melhoria da qualidade de vida dos cidadãos. Esta Tese de Mestrado tem por objetivo a aplicação de um sistema de avaliação de pedreiras produtoras de agregados partindo da análise integrada de indicadores setoriais nas áreas económica, social e ambiental. Deste modo é proposto o desenvolvimento de um método de avaliação que permita proceder a uma análise qualitativa e quantitativa do desempenho de pedreiras do ponto de vista da sua sustentabilidade. Numa abordagem inicial, enquadradora das questões que se levantam com as políticas de desenvolvimento sustentável, é feita uma introdução relativa às correntes de pensamento dominantes sobre esta questão, tendo ainda sido feito um relacionamento entre as questões ligadas com o planeamento estratégico deste setor industrial e as questões ligadas com o ordenamento do território. Posteriormente, é feita uma análise do enquadramento do setor extrativo relativo à exploração de pedreiras no âmbito das políticas económicas, sociais e ambientais da Comunidade Europeia e uma caracterização da importância deste setor industrial na economia portuguesa. Após o desenvolvimento destas questões, é dada sequência ao trabalho desenvolvido na adoção e criação de indicadores económicos, sociais e ambientais adaptados à situação particular das pedreiras produtoras de inertes portuguesas. Finalmente, é proposto o desenvolvimento de um método de cálculo tendo em vista a criação de um Índice de Sustentabilidade a partir da análise dos resultados dos indicadores setoriais anteriormente referidos. Assim, é apresentada uma súmula de conclusões sobre este tipo de abordagem, suas vantagens e inconvenientes relativamente aos métodos tradicionais de avaliação deste tipo de indústria. É, por último, apresentado um conjunto de sugestões que permitam a utilização na rotina, de forma acessível, desta nova ferramenta de análise.
Resumo:
El propósito del presente trabajo es analizar el proceso de construcción de los Programas de Estímulos al Desempeño del Personal Académico (PEDPA), con el fin de ilustrar algunos problemas metodológicos básicos del sistema de evaluación asociado y sus repercusiones en las puntuaciones y estímulos económicos del personal evaluado. Se toma el caso de una universidad pública mexicana, describiendo el contexto institucional, las distintas etapas para elaborar el sistema evaluativo y los resultados obtenidos. Se concluye que los PEDPA adolecen de problemas metodológicos debido a la poca congruencia del modelo evaluativo con los propósitos declarados, la ausencia de los grupos colegiados en la construcción del modelo y la falta de participación de especialistas en evaluación.
Resumo:
Basándose en la necesidad manifiesta de la empresa Thomas Greg & Sons de Colombia por controlar los costos en los que incurre por adoptar un Sistema de Gestión de Calidad, se realizó una investigación de los procesos que realiza la empresa a nivel productivo y el esquema de costos que utiliza a nivel organizacional, con el fin de proponer y concebir un modelo de administración de costos de la calidad y de la no calidad que sea conforme a lo esperado por la alta gerencia y que contribuya significativamente al control de costos.
Resumo:
Las organizaciones en la actualidad deben encontrar diferentes maneras de sobrevivir en un tiempo de rápida transformación. Uno de los mecanismos usados por las empresas para adaptarse a los cambios organizacionales son los sistemas de control de gestión, que a su vez permiten a las organizaciones hacer un seguimiento a sus procesos, para que la adaptabilidad sea efectiva. Otra variable importante para la adaptación es el aprendizaje organizacional siendo el proceso mediante el cual las organizaciones se adaptan a los cambios del entorno, tanto interno como externo de la compañía. Dado lo anterior, este proyecto se basa en la extracción de documentación soporte valido, que permita explorar las interacciones entre estos dos campos, los sistemas de control de gestión y el aprendizaje organizacional, además, analizar el impacto de estas interacciones en la perdurabilidad organizacional.