970 resultados para light environment
Resumo:
The goal of this work was to explore the thermal relationship between foraging Triatoma brasiliensis and its natural habitat during the hottest season in the state of Ceará, Brazil. The thermal profiles were determined using infrared analysis. Although the daily temperature of rock surfaces varied in a wide range, T. brasiliensisselected to walk through areas with temperatures between 31.7-40.5ºC. The temperature of T. brasiliensisbody surface ranged from 32.8-34.4ºC, being higher in legs than the abdomen. A strong relationship was found between the temperature of the insect and the temperature of rock crevices where they were hidden (r: 0.96, p < 0.05). The species was active at full sunlight being a clear example of how the light-dark rhythm may be altered, even under predation risk. Our results strongly suggest a thermal borderline for T. brasiliensisforaging activity near 40ºC. The simultaneous determination of insect body and rock temperatures here presented are the only obtained in natural habitats for this or other triatomines.
Resumo:
Abstract OBJECTIVE Analyzing the elements that compose the environment of pregnant women who have experienced intimate partner violence in the light of Levine's Nursing Theory. METHOD A qualitative, descriptive study conducted from September to January 2012, with nine pregnant women in a Municipal Health Center in Rio de Janeiro. The interviews were semi-structured and individual. The theoretical framework was based on Levine's Nursing Theory. RESULTS Thematic analysis evidenced the elements that composed the external environment, such as violence perpetrated by intimate partners before and during pregnancy, violence in childhood and adolescence, alcohol consumption and drug use by the partner, unemployment, low education and economic dependency, which affected health and posed risks to the pregnancy. CONCLUSION Violence perpetrated by an intimate partner was the main external factor that influenced the internal environment with repercussions on health. This theory represents a tool in nursing care which will aid in detecting cases and the fight against violence.
Resumo:
Ambient light conditions trigger both developmental transitions, such as the induction of flowering, and a suite of adaptive responses, exemplified by the shade-avoidance syndrome. These responses are initiated by three families of photoreceptors that are conserved in all higher plants: the phototropins, cryptochromes and phytochromes (phyA--phyE, cry1--cry3, phot1 and phot2 in Arabidopsis). Molecular genetic studies performed mainly in Arabidopsis indicate that photon capture by these light sensors usually initiates rapid changes in the gene expression profile, leading to plant adaptation to their environment. Interestingly, numerous transcription factors are early targets of light regulation, both at the transcriptional and post-transcriptional levels.
Resumo:
Phytochromes are red/far-red photosensors that regulate numerous developmental programs in plants. Among them, phytochrome A (phyA) is essential to enable seedling de-etiolation under continuous far-red (FR) light, a condition that mimics the environment under a dense canopy. The ecological relevance of this response is demonstrated by the high mortality rate of phyA mutant plants that germinate in deep vegetational shade. phyA signaling involves direct interaction of the photoreceptor with phytochrome-interacting factors PIF1 and PIF3, members of the bHLH transcription factor family. Here we investigated the involvement of PIF4 and PIF5 in phyA signaling, and found that they redundantly control de-etiolation in FR light. The pif4 pif5 double mutant is hypersensitive to low fluence rates of FR light. This phenotype is dependent on FR light perception by phyA, but does not rely on alterations in the phyA level. Our microarray analysis shows that PIF4 and PIF5 are part of an inhibitory mechanism that represses the expression of some light-responsive genes in the dark, and that they are also needed for full expression of several growth-related genes in the light. Unlike PIF1 and PIF3, PIF4 and PIF5 are not degraded in response to FR light, indicating that they are light-regulated by a different mechanism. Our genetic analysis suggests that this is achieved through sequestration of these PIFs by the closely related bHLH transcription factor HFR1 (long hypocotyl in FR light).
Resumo:
SUMMARY : Phytochromes constitute a family of red/far-red photoreceptors regulating all the major transitions during the life cycle of plants. In Arabidopsis, five members: phyA,_ B, C, D and E, were identified. Phytochromes are synthesized in their inactive red-light absorbing form called Pr. Upon light absorbance they convert to the far-red light absorbing Pfr form. The Pfr form is the active conformer which converts back to the Pr form either rapidly upon far-red perception or in a slower process called dark reversion. ph~A represents an exception, in that it does not significantly dark-revert and two specific processes have been developed by the plants to decrease the amount of biologically active phyA. The first one is alight-dependent repression of the PHYA gene expression and the second one is alight-dependent degradation of the phyA protein. The latter is the most efficient process to rapidly decrease the level of active phyA. The ability of plants to regulate the amount of active phyA is critical in a far-red rich environment, a situation observed under a canopy. In these conditions, phyA is essential to induce the germination and the deetiolation of the young seedling. Later in the development the ability of phyA to repress growth counteracts the shade avoidance response. Therefore decreasing the amount of phyA allows stem growth and to compete with neighbours for the light. In this thesis, I investigate the light-dependent degradation of phyA. I developed a reverse genetic approach based on the systematic analysis of the light-dependent accumulation of phyA in the different cullin mutant cull, cul3a; cul3b and cul4. This analysis allowed me to show that CUL1 and CUL3A-based E3 ligase complexes are involved in the regulation of phyA degradation. Surprisingly, our results also demonstrate that cu14 is not affected in the degradation of phyA whereas constitutive Photomorphogenic 1 (COP1) a subunit of one CUL4based E3 complex was reported to be involved. Further investigations showed that the phenotype of cop1 is conditional, the mutant being defective in phyA degradation only in the presence of metabolisable sugars. I also showed that phyA is degraded by a proteasome-dependent mechanism both in the cytoplasm and in the nucleus using mutants and transgenic lines affected in the localization of phyA. Interestingly, I observed that phyA degradation was faster in the nucleus than in the cytosol and that rapid degradation of Pr also occurred in the nucleus suggesting that cytosolic accumulation of phyA in the dark is a way to regulate its proteolysis. Finally, we identify a short region similar to a PEST sequence required for phyA stability and we developed a unbiased genetic screen to identify new components involved in the regulation of the light-dependent degradation of phyA. The significance of these results are discussed. RESUME : Les phytochromes (phy) constituent une famille de photorécepteurs absorbant la lumière rouge et rouge lointaine et régulant toutes les étapes de transitions majeures dans la vie des plantes. Chez Arabidopsis, cinq membres : phyA, B, C, D et E ont été identifiés. Les phytochromes sont synthétisés sous une forme inactive appelée Pr absorbant la lumière rouge. Après perception de lumière ils passent sous une forme active Pfr absorbant dans le rouge lointain. La forme Pfr peut retourner sous la forme Pr après absorption de lumiëre rouge lointaine ou dans un processus lent appelé «réversion à l'obscurité ». phyA représente une exception à cette règle car il ne retoune pas significativement sous sa forme inactive dans le noir. Deux processus spécifiques ont donc été développés pour diminuer le taux de phyA actif. Le premier consiste en la répression du gène PHYA en condition de lumière et le second en une dégradation induite par la lumière de la protéine phyA. Ce dernier processus est le plus efficace pour diminuer rapidement le niveau de phyA. La capacité des plantes à réguler le taux de phyA actifs est critique dans un environnement riche en lumière rouge lointaine, une situation observée sous une canopée. Sous une canopée, phyA est essentiel pour induire la germination et la dé-étiolation de la jeune pousse. Plus tard dans le développement la capacité de phyA de réprimer la croissance freine la «réponse à l'évitement de l'ombre ». Par conséquent diminuer le taux de phyA permet la croissance de la tige et donc de rentrer en compétition pour la lumière avec les plantes avoisinantes. Dans cette thèse, j'ai étudié la dégradation de phyA. J'ai développé une approche génétique inverse basée sur l'analyse systématique de l'accumulation de phyA en condition de lumière dans les différents mutants cullin, cul1, cul3a, cul3b et cul4. Ces analyses nous ont permis d'identifier qu'un complexe E3 ligase CUL1 et un complexe E3 ligase CUL3A sont impliqués dans la régulation de la dégradation de phyA. Mes résultats démontrent aussi que le mutant cul4 n'est pas affecté dans la dégradation de phyA alors que Çonstitutive Photomorphogenic 1 (COPI) une sous unité d'un complexe CUL4 à été identifier dans la régulation de cette dégradation. Des analyses supplémentaires suggèrent que l'effet de la mutation cop1 est dépendante dë la présence de sucres métabolisables. J'ai aussi montré que phyA est dégradé dans le noyau et dans le cytoplasme par un mécanisme dépendant du protéasome et que la dégradation dans le.noyau est non seulement aspécifique de la forme Pr ou Pfr mais aussi est plus rapide que dans le cytoplasme. Ceci suggère que l'accumulation de phyA dans le cytoplasme permet son accumulation à des niveaux élevés à l'obscurité. Enfin j'ai identifié une région similaire à un motif PEST requise pour la stabilité de phyA et j'ai aussi développé un criblage génétique non biaisé pour identifier de nouveaux composants impliqués dans la régulation de la dégradation de phyA. L'importance de ces résultats est discutée dans le dernier chapitre de cette thèse.
Resumo:
AIMS/HYPOTHESIS: To assist in the development of preventive strategies, we studied whether the neighbourhood environment or modifiable behavioural parameters, including cardiorespiratory fitness (CRF) and physical activity (PA), are independently associated with obesity and metabolic risk markers in children. METHODS: We carried out a cross-sectional analysis of 502 randomly selected first and fifth grade urban and rural Swiss schoolchildren with regard to CRF, PA and the neighbourhood (rural vs urban) environment. Outcome measures included BMI, sum of four skinfold thicknesses, homeostasis model assessment of insulin resistance (HOMA-IR) and a standardised clustered metabolic risk score. RESULTS: CRF and PA (especially total PA, but also the time spent engaged in light and in moderate and vigorous intensity PA) were inversely associated with measures of obesity, HOMA-IR and the metabolic risk score, independently of each other, and of sociodemographic and nutritional parameters, media use, sleep duration, BMI and the neighbourhood environment (all p < 0.05). Children living in a rural environment were more physically active and had higher CRF values and reduced HOMA-IR and metabolic risk scores compared with children living in an urban environment (all p < 0.05). These differences in cardiovascular risk factors persisted after adjustment for CRF, total PA and BMI. CONCLUSIONS/INTERPRETATION: Reduced CRF, low PA and an urban environment are independently associated with an increase in metabolic risk markers in children.
Resumo:
The purpose of this study was to increase the understanding of the role and nature of trust in asymmetric technology partnership formation. In the knowledge-based "learning race" knowledge is considered as a primary source for competitive advantage. In the emerging ICT sector the high pace of technological change, the convergence of technologies and industries as well as the increasing complexity and uncertainty have forced even the largest players to seek cooperation for complementary knowledge and capabilities. Small technology firms need the complementary resources and legitimacy of the large firms to grow and compete in the global market place. Most of the earlier research indicates, however, that partnerships with asymmetric size, managerial resources and cultures have failed. A basic assumption supported by earlier research was that trust is a critical factor in asymmetric technology partnership formation. Asymmetric technology partnership formation is a dynamic and multi-dimensional process, and consequently a holistic research approach was selected. Research issue was approached from different levels: the individual decision-maker, the firm and the relationship between the parties. Also the impact of the dynamic environment and technology content was analyzed. A multitheoretical approach and a qualitative research method with in-depth interviews in five large ICT companies and eight small ICT companies enabled a holistic and rich view of the research issue. Study contributes on the scarce understanding on the nature and evolution of trust in asymmetric technology partnership formation. It sheds also light on the specific nature of asymmetric technology partnerships. The partnerships were found to be tentative and the diverse strategic intent of small and large technology firms appeared as a major challenge. The role of the boundary spanner was highlighted as a possibility to match the incompatible organizational cultures. A shared vision was found to be a pre-condition for individual-based fast trust leading to intuitive decision-making and experimentation. The relationships were tentative and they were continuously re-evaluated through the key actors' sense making of the technology content, asymmetry and the dynamic environment. A multi-dimensional conceptualization for trust was created and propositions on the role and nature of trust for further research are given. The purpose of this study was to increase the understanding of the role and nature of trust in asymmetric technology partnership formation. In the knowledge-based "learning race" knowledge is considered as a primary source for competitive advantage. In the emerging ICT sector the high pace of technological change, the convergence of technologies and industries as well as the increasing complexity and uncertainty have forced even the largest players to seek cooperation for complementary knowledge and capabilities. Small technology firms need the complementary resources and legitimacy of the large firms to grow and compete in the global market place. Most of the earlier research indicates, however, that partnerships with asymmetric size, managerial resources and cultures have failed. A basic assumption supported by earlier research was that trust is a critical factor in asymmetric technology partnership formation. Asymmetric technology partnership formation is a dynamic and multi-dimensional process, and consequently a holistic research approach was selected. Research issue was approached from different levels: the individual decision-maker, the firm and the relationship between the parties. Also the impact of the dynamic environment and technology content was analyzed. A multitheoretical approach and a qualitative research method with in-depth interviews in five large ICT companies and eight small ICT companies enabled a holistic and rich view of the research issue. Study contributes on the scarce understanding on the nature and evolution of trust in asymmetric technology partnership formation. It sheds also light on the specific nature of asymmetric technology partnerships. The partnerships were found to be tentative and the diverse strategic intent of small and large technology firms appeared as a major challenge. The role of the boundary spanner was highlighted as a possibility to match the incompatible organizational cultures. A shared vision was found to be a pre-condition for individual-based fast trust leading to intuitive decision-making and experimentation. The relationships were tentative and they were continuously re-evaluated through the key actors' sense making of the technology content, asymmetry and the dynamic environment. A multi-dimensional conceptualization for trust was created and propositions on the role and nature of trust for further research are given.
Resumo:
This paper attempts to shed light on the competencies a teacher must have inorder to teach in online university environments. We will relate a teacher trainingexperience, which was designed taking into account the methodological criteriaestablished in line with previous theoretical principles. The main objective of ouranalysis is to identify the achievements and difficulties of a specific formativeexperience, with the ultimate goal of assessing the suitability of this conceptualmethodologicalframework for the design of formative proposals aiming to contribute tothe development of teacher competencies for virtual environments.
Resumo:
Cordia curassavica (Jacq.) Roem. & Schult. (Boraginaceae), also referred to as Cordia verbenacea DC, has been traditionally used for medicinal purposes. This study was driven to verify the behavior of the species in similar conditions to its natural environment, such as high light intensity and sandbank soil, and in conditions of low light intensity and fertilized substratum (dystroferric red nitosoil plus earthworm humus). The growth of the plant, the income of leaf crude extracts and, in the alcoholic extract, the number of substances found in thin layer cromatography and the toxicity of the substratum was observed. The results indicated that the growth of the root biomass, stem and leaves in discharge or lower light intensity was similar, but smaller in sandbank soil than in fertilized soil. The relative income of extracts in ether of petroleum and alcohol was larger in high light intensity and fertilized substratum. The light intensity and the substratum type didn't affect the number of substances detected in the alcoholic extract or the toxicity of this extract. Stains corresponding to the rosmarinic acid were only evidenced in some samples of the alcoholic extract, not allowing the verification of the effect of the treatments about its production.
Resumo:
The aim of the present study was to demonstrate the wide applicability of the novel photoluminescent labels called upconverting phosphors (UCPs) in proximity-based bioanalytical assays. The exceptional features of the lanthanide-doped inorganic UCP compounds stem from their capability for photon upconversion resulting in anti-Stokes photoluminescence at visible wavelengths under near-infrared (NIR) excitation. Major limitations related to conventional photoluminescent labels are avoided, rendering the UCPs a competitive next-generation label technology. First, the background luminescence is minimized due to total elimination of autofluorescence. Consequently, improvements in detectability are expected. Second, at the long wavelengths (>600 nm) used for exciting and detecting the UCPs, the transmittance of sample matrixes is significantly greater in comparison with shorter wavelengths. Colored samples are no longer an obstacle to the luminescence measurement, and more flexibility is allowed even in homogeneous assay concepts, where the sample matrix remains present during the entire analysis procedure, including label detection. To transform a UCP particle into a biocompatible label suitable for bioanalytical assays, it must be colloidal in an aqueous environment and covered with biomolecules capable of recognizing the analyte molecule. At the beginning of this study, only UCP bulk material was available, and it was necessary to process the material to submicrometer-sized particles prior to use. Later, the ground UCPs, with irregular shape, wide size-distribution and heterogeneous luminescence properties, were substituted by a smaller-sized spherical UCP material. The surface functionalization of the UCPs was realized by producing a thin hydrophilic coating. Polymer adsorption on the UCP surface is a simple way to introduce functional groups for bioconjugation purposes, but possible stability issues encouraged us to optimize an optional silica-encapsulation method which produces a coating that is not detached in storage or assay conditions. An extremely thin monolayer around the UCPs was pursued due to their intended use as short-distance energy donors, and much attention was paid to controlling the thickness of the coating. The performance of the UCP technology was evaluated in three different homogeneous resonance energy transfer-based bioanalytical assays: a competitive ligand binding assay, a hybridization assay for nucleic acid detection and an enzyme activity assay. To complete the list, a competitive immunoassay has been published previously. Our systematic investigation showed that a nonradiative energy transfer mechanism is indeed involved, when a UCP and an acceptor fluorophore are brought into close proximity in aqueous suspension. This process is the basis for the above-mentioned homogeneous assays, in which the distance between the fluorescent species depends on a specific biomolecular binding event. According to the studies, the submicrometer-sized UCP labels allow versatile proximity-based bioanalysis with low detection limits (a low-nanomolar concentration for biotin, 0.01 U for benzonase enzyme, 0.35 nM for target DNA sequence).
Resumo:
The research proposes a methodology for assessing broiler breeder response to changes in rearing thermal environment. The continuous video recording of a flock analyzed may offer compelling evidences of thermal comfort, as well as other indications of welfare. An algorithm for classifying specific broiler breeder behavior was developed. Videos were recorded over three boxes where 30 breeders were reared. The boxes were mounted inside an environmental chamber were ambient temperature varied from cold to hot. Digital images were processed based on the number of pixels, according to their light intensity variation and binary contrast allowing a sequence of behaviors related to welfare. The system used the default of x, y coordinates, where x represents the horizontal distance from the top left of the work area to the point P, and y is the vertical distance. The video images were observed, and a grid was developed for identifying the area the birds stayed and the time they spent at that place. The sequence was analyzed frame by frame confronting the data with specific adopted thermal neutral rearing standards. The grid mask overlapped the real bird image. The resulting image allows the visualization of clusters, as birds in flock behave in certain patterns. An algorithm indicating the breeder response to thermal environment was developed.
Resumo:
Sweet pepper is one of the ten most consumed vegetables in world. Although it develops better under protected environment, the cultivation in tropical countries is practiced in open field due greenhouse structure higher costs. Unfortunately, such practice has compromised the crop to reach either best yield or fruit quality. Since production and cost are the most important criteria for agricultural production, we aimed to evaluate reflective aluminized polypropylene shading net influence on sweet pepper (Capsicum annuum L.) growth and production as intermediary alternative for low/middle income producers from Brazilian tropical regions. Sweet pepper Magali R hybrid was cultivated in two environments: FC - field conditions (control) and RS - reflective shading net with 40% shading rate. RS caused reductions in incident solar radiation (SR) and photosynthetically active radiation (PAR) on the amount of 46.3% and 48.3%, respectively. There were no significant changes in temperature and relative humidity recorded for the two environments. In addition, RS allowed best use efficiency of photosynthetically active radiation since it promoted higher values of plant height, leaf number and area index than those reached on FC on the amount of 29%, 22% and 80 %, respectively. Similarly, plants grown under RS showed higher yield and marketable fruits and promoted less loses by sunscald.
Resumo:
This thesis consists of four articles and an introductory section. The main research questions in all the articles refer to the changes in the representativeness of the Finnish Paper Workers' Union. Representativeness stands for the entire entity of external, internal, legal and reputational factors that enable the labor union to represent its members and achieve its goals. This concept is based on an extensive reading of quantitative and qualitative industrial relations literature, which includes works based on Marxist labor-capital relations (such as Hyman's industrial relations studies), and more recent union density studies as well as gender- and ethnic diversity-based 'union revitalization' studies. Müller-Jentsch's German studies of industrial relations have been of particular importance as well as Streeck's industrial unionism and technology studies. The concept of representativeness is an attempt to combine the insights of these diverse strands of literature and bring the scientific discussion of labor unions back to the core of a union's function: representing its members. As such, it can be seen as a theoretical innovation. The concept helps to acknowledge both the heterogeneity of the membership and the totality of a labor union organization. The concept of representativeness aims to move beyond notions of 'power'. External representativeness can be expressed through the position of the labor union in the industrial relations system and the economy. Internal representativeness focuses on the aspects of labor unions that relate to the function of the union as an association with members, such as internal democracy. Legal representativeness lies in the formal legal position of the union – its rights and instruments. This includes collective bargaining legislation, co-decision rules and industrial conflict legislation. Reputational representativeness is related to how the union is seen by other actors and the general public, and can be approximated using data on strike activity. All these aspects of representativeness are path-dependent, and show the results of previous struggles over issues. The concept of representativeness goes beyond notions of labor union power and symbolizes an attempt to bring back the focus of industrial relations studies to the union's basic function of representing its members. The first article shows in detail the industrial conflict of the Finnish paper industry in 2005. The intended focus was the issue of gender in the negotiations over a new collective agreement, but the focal point of the industrial conflict was the issue of outsourcing and how this should be organized. Also, the issue of continuous shifts as an issue of working time was very important. The drawn-out conflict can be seen as a struggle over principles, and under pressure the labor union had to concede ground on the aforementioned issues. The article concludes that in this specific conflict, the union represented its' female members to a lesser extent, because the other issues took such priority. Furthermore, because of the substantive concessions. the union lost some of its internal representativeness, and the stubbornness of the union may have even harmed the reputation of the union. This article also includes an early version of the representativeness framework, through which this conflict is analyzed. The second article discusses wage developments, union density and collective bargaining within the context of representativeness. It is shown that the union has been able to secure substantial benefits for its members, regardless of declining employment. Collective agreements have often been based on centralized incomes policies, but the paper sector has not always joined these. Attention is furthermore paid to the changing competition of the General Assembly, with a surprisingly strong position of the Left Alliance still. In an attempt to replicate analysis of union density measures, an analysis of sectoral union density shows that similar factors as in aggregate data influence this measure, though – due to methodological issues – the results may not be robust. On this issue, it can be said that the method of analysis for aggregate union density is not suitable for sectoral union density analysis. The increasingly conflict-ridden industrial relations predicted have not actually materialized. The article concludes by asking whether the aim of ever-increasing wages is a sustainable one in the light of the pressures of globalization, though wage costs are a relatively small part of total costs. The third article discusses the history and use of outsourcing in the Finnish paper industry. It is shown using Hyman's framework of constituencies that over time, the perspective of the union changed from 'members of the Paper Workers' Union' to a more specific view of who is a core member of the union. Within the context of the industrial unionism that the union claims to practice, this is an important change. The article shows that the union more and more caters for a core group, while auxiliary personnel is less important to the union's identity and constituencies, which means that the union's internal representativeness has decreased. Maintenance workers are an exception; the union and employers have developed a rotating system that increases the efficient allocation of these employees. The core reason of the exceptional status of maintenance personnel is their high level of non-transferable skills. In the end it is debatable whether the compromise on outsourcing solves the challenges facing the industry. The fourth article shows diverging discourses within the union with regard to union-employer partnership for competitiveness improvements and instruments of local union representatives. In the collective agreement of 2008, the provision regulating wage effects of significant changes in the organization or content of work was thoroughly changed, though this mainly reflected decisions by the Labor Court on the pre-2008 version of the provision. This change laid bare the deep rift between the Social Democratic and Left Alliance (ex-Communist) factions of the union. The article argues that through the changed legal meaning of the provision, the union was able to transform concession bargaining into a basis for partnership. The internal discontent about this issue is nonetheless substantial and a threat to the unity of the union, both locally and at the union level. On the basis of the results of the articles, other factors influencing representativeness, such as technology and EU law and an overview of the main changes in the Finnish paper industry, it is concluded that, especially in recent years, the Finnish Paper Workers' Union has lost some of its representativeness. In particular, the loss of the efficiency of strikes is noted, the compromise on outsourcing which may have alienated a substantial part of the union's membership, and the change in the collective agreement of 2008 have caused this decline. In the latter case, the internal disunion on that issue shows the constraints of the union's internal democracy. Furthermore, the failure of the union to join the TEAM industrial union (by democratic means), the internal conflicts and a narrow focus on its own sector may also hurt the union in the future, as the paper industry in Finland is going through a structural change. None of these changes in representativeness would have been so drastic without the considerable pressure of globalization - in particular changing markets, changing technology and a loss of domestic investments to foreign investments, which in the end have benefited the corporations more than the Finnish employees of these corporations. Taken together, the union risks becoming socially irrelevant in time, though it will remain formally very strong on the basis of its institutional setting and financial situation.
Resumo:
ABSTRACT The present study aims to evaluate crop, pasture and forest land prices in Brazil, between 1994 and 2010, in the light of Post-Keynesian theory. The results provide evidence that land, more than just a simple factor of production, must be conceived of as an economic asset. In fact, the price of rural land is determined not only by the expected profitability deriving from agricultural activities but also by the agents' expectations about its future appreciation and liquidity in an economic environment permeated with uncertainty. In this context, as an object of speculation, land has been particularly important as a store of value.
Resumo:
Obtaining automatic 3D profile of objects is one of the most important issues in computer vision. With this information, a large number of applications become feasible: from visual inspection of industrial parts to 3D reconstruction of the environment for mobile robots. In order to achieve 3D data, range finders can be used. Coded structured light approach is one of the most widely used techniques to retrieve 3D information of an unknown surface. An overview of the existing techniques as well as a new classification of patterns for structured light sensors is presented. This kind of systems belong to the group of active triangulation method, which are based on projecting a light pattern and imaging the illuminated scene from one or more points of view. Since the patterns are coded, correspondences between points of the image(s) and points of the projected pattern can be easily found. Once correspondences are found, a classical triangulation strategy between camera(s) and projector device leads to the reconstruction of the surface. Advantages and constraints of the different patterns are discussed