Life history and production of Capitella capitata (Polychaeta: Capitellidae) in Río de la Plata Estuary (Argentina)

A benthic survey was carried out from November 1998 to December 1999 in the tidal flats of Bahía Samborombón (Río de la Plata estuary, Argentina), in order to study the population structure, reproductive aspects, growth and secondary production of Capitella capitata (Fabricius, 1780). Growth was analyzed using ELEFAN routine, and the secondary production was estimated by Hynes and Coleman's method (1968). C. capitata did not present periods of very important recruitments throughout the year; however, the abundance of smallest size classes was higher during summer and autumn. The summer cohort showed a growth rate (K) of 2.05 and a seasonal growth oscillation (C) of 0.6, pointing out that worms grew very slowly during winter months. The life span of this cohort was 13 months. The autumn cohort showed a lower growth rate (K= 1.5) and its growth was lowest during winter. The life span was 15 months for this cohort. C. capitata in Punta Rasa presented an extended reproductive period, with absence of activity during winter months. The type of eggs and larvae suggest that C. capitata has benthic larval development in the study area, destining its reproductive effort to the production of a low number of eggs, and assuring larvae survival through incubation in brooding tubes. The annual mean biomass in Punta Rasa was 0.117 g m-2 (AFDW), with a mean secondary production of 0.23 g m-2 y-1 and a P/B ratio of 1.96 y-1. The relatively low density, biomass production and P/B ratio of C. capitata in Punta Rasa can be considered as reference values for this species inhabiting undisturbed or moderately disturbed areas.

The effect of food concentration on the life history of three types of Brachionus calyciflorus females

The effect of food concentration on the life history of three types of Brachionus calciflorus females (amictic, unfertilized mictic and fertilized mictic female) was studied with replicated individual cultures at 25 degrees and at four food concentrations (1.5, 3.0, 6.0 and 9.0 x 10(6) cells mL(-1)) of Scenedesmus obliquus. There were highly significant effects of both food concentration and female type, independently and in interaction on the duration of juvenile period of the rotifer, but neither a;ere the effects on the duration of post-reproductive period and mean life-span. The duration of juvenile period of unfertilized mictic female at the food concentration of 9.0 x 10(6) cells mL(-1) was the longest among all the food concentration-female type combinations. Both food concentration and female type influenced significantly the duration of reproductive period and the number of eggs produced by each type of female per life cycle, respectively. There was, however, no significant interaction between food level and female type. Among the three types of females, the number of eggs produced by an unfertilized mictic female was the largest. and that of a fertilized mictic female was the smallest.

Measuring health-related quality of life after stroke: A brief tool.

Routine assessment of health-related quality of life (HRQoL) can be time consuming and burdensome for a person with stroke. Therefore the aim of this study was to develop and test a brief instrument for assessing HRQoL among people with stroke. The Quality of Life after Stroke Scale (QLASS) was constructed from items within the Quality of Life Index-Stroke Version and the Chronic Respiratory Disease Questionnaire. It was administered to 92 people with stroke at three points in time: immediately after discharge from hospital, 6 months and 12 months later. Results suggest that the QLASS has 19 items which represent three factors: emotional functioning, mastery and fatigue which correlate with valid measures of health status and activities of daily living. The QLASS is proposed as a brief, valid HRQoL tool for use among people with stroke.

Retrofit versus new-build house using life-cycle assessment

This paper reports the findings of research on the environmental performance of two case-study houses, a retrofit and new build. The retrofit was completed to a Passivhaus standard while the new build was completed to current Irish building regulations. Environmental performance of the retrofit and new build was measured using life-cycle assessments, examining the assembly, operational and end-of-life stage over life spans of 50 and 80 years. Using primary information, life-cycle assessment software and life-cycle assessment databases the environmental impacts of each stage were modelled. The operational stage of both case studies was found to be the source of the most significant environmental damage, followed by the assembly and the end-of-life stage respectively. The relative importance of the assembly and end-of-life stage decreased as the life span increased. It was found that the retrofit house studied outperformed the new build in the assembly and operational stage, whereas the new build performed better in the end-of-life stage; however, this is highly sensitive, depending on the standards to which both are completed. Operational energy savings pre- and post-retrofit were significant, indicating the future potential for adoption of high-quality retrofitting practices.

A Novel Method to Enable Trade-offs Across the Whole Product Life of an Aircraft Using Value Driven Design

The increasing need to understand complex products and systems with long life spans, presents a significant challenge to designers who increasingly require a broader understanding of the operational aspects of the system. This demands an evolution in current design practice, as designers are often constrained to provide a subsystem solution without full knowledge of the global system operation. Recently there has been a push to consider value centric approaches which should facilitate better or more rapid convergence to design solutions with predictable completion schedules. Value Driven Design is one such approach, in which value is used as the system top level objective function. This provides a broader view of the system and enables all sub-systems and components to be designed with a view to the effect on project value. It also has the capacity to include value expressions for more qualitative aspects, such as environmental impact. However, application of the method to date has been restricted to comparing value in a programme where the lifespan is fixed and known a priori. This paper takes a novel view of value driven design through the surplus value objective function, and shows how it can be used to identify key sensitivities to guide designers in design trade-off decisions. By considering a new time based approach it can be used to identify optimum programme life-span and hence allow trade-offs over the whole product life.

Wear analysis and prediction of the life of a riveting die used in the automotive industry

Knowledge on the life span of the riveting dies used in the automotive industry is sparse. It is often the case that only when faulty products are produced are workers aware that their tool needs to be changed. This is of course costly both in terms of time and money. Responding to this challenge, this paper proposes a methodology which integrates wear and stress analysis to quantify the life of a riveting die. Experiments are carried out to measure the applied load required to split a rivet. The obtained results (i.e. force curves) are used to validate the wear mechanisms of the die observed using scanning electron microscopy. Sliding, impact, and adhesive wears are observed on the riveting die after a certain number of riveting cycles. The stress distribution on the die during riveting is simulated using a finite element (FE) approach. In order to confirm the accuracy of the FE model, the experimental force results are compared with the ones produced from FE simulation. The maximum and minimum von Mises' stresses generated from the FE model are input into a Goodman diagram and an S-N curve to compute the life of the riveting die. It is found that the riveting die is predicted to run for 4 980 000 cycles before failure.

Life cycle of the QBO-modulated 11-year solar cycle signals in the Northern Hemispheric winter

This paper provides some insights on the quasi-biennial oscillation (QBO) modulated 11-year solar cycle (11-yr SC) signals in Northern Hemisphere (NH) winter temperature and zonal wind. Daily ERA-40 Reanalysis and ECMWF Operational data for the period of 1958-2006 were used to examine the seasonal evolution of the QBO-solar cycle relationship at various pressure levels up to the stratopause. The results show that the solar signals in the NH winter extratropics are indeed QBO-phase dependent, moving poleward and downward as winter progresses with a faster descent rate under westerly QBO than under easterly QBO. In the stratosphere, the signals are highly significant in late January to early March and have a life span of 30-50 days. Under westerly QBO, the stratospheric solar signals clearly lead and connect to those in the troposphere in late March and early April where they have a life span of 10 days. As the structure changes considerably from the upper stratosphere to the lower troposphere, the exact month when the maximum solar signals occur depends largely on the altitude chosen. For the low-latitude stratosphere, our analysis supports a vertical double-peaked structure of positive signature of the 11-yr SC in temperature, and demonstrates that this structure is further modulated by the QBO. These solar signals have a longer life span (3-4 months) in comparison to those in the extratropics. The solar signals in the lower stratosphere are stronger in early winter but weaker in late winter, while the reverse holds in the upper stratosphere.

Quantifying the residual creep life of polyester mooring ropes

This paper assesses the ARELIS (Assured Residual Life Span) method for estimating residual creep life of polyester rope used in deepwater mooring lines. A statistical model has been developed to quantify the uncertainties in the method, such as the scatter in creep rupture test data and load sharing between sub-ropes. This model can be used to determine the required test load, duration and number of ARELIS tests, in order to guarantee a minimum creep life for a mooring line at its service load. Creep rupture tests have been performed to provide input for the statistical model.

Are differences in life history parameters of the pine beauty moth Panolis flammea modified by host plant quality or gender?

Pine beauty moth (Panolis flammea D&S, Lepidoptera: Noctuidae) were reared individually from egg hatch to pupation on one of three host plants, Pinus sylvestris (native host plant), Pinus contorta (Central Interior seed origin - good quality introduced host) and P. contorta (Alaskan seed origin - poor quality introduced host). After emerging from the pupae the adult moths were confined to a Skeena River seed origin of P. contorta. Female pupal weight and adult life span were significantly higher on P. sylvestris than on the two lodgepole pine seed origins. Development time was, however, not significantly different between treatments, but larval mean relative growth rate was found to be negatively correlated with birth weight and positively correlated with pupal weight. The time to emerge from the pupa was also not significantly different between treatments. However, there were marked differences between the genders. Male moths lost a significantly greater proportion of their weight over the pupal stage but lived significantly longer as adults than the females. Female moths emerged from the pupal stage significantly sooner than male moths. There was no apparent advantage of lai-ge birth size when looked at in terms of subsequent performance. These results are discussed in light of current life history theory.

Life Expectancy and Entropy Values for Workers of Pachycondyla striata (Hymenoptera: Formicidae: Ponerinae)

We investigated the life expectancy and entropy value for workers of the ant Pachycondyla striata. Seven nests were excavated and these colonies were raised in laboratory conditions. The workers have a mean life-span of 74.48 days, these have a high mortality rate in the period of 1 to 85 days with a high entropy value of H = 0.611, confirming the number of deaths in the initial period.

Modeling of red blood cell life-spans in hematologically normal populations

Despite the impact of red blood cell (RBC) Life-spans in some disease areas such as diabetes or anemia of chronic kidney disease, there is no consensus on how to quantitatively best describe the process. Several models have been proposed to explain the elimination process of RBCs: random destruction process, homogeneous life-span model, or a series of 4-transit compartment model. The aim of this work was to explore the different models that have been proposed in literature, and modifications to those. The impact of choosing the right model on future outcomes prediction--in the above mentioned areas--was also investigated. Both data from indirect (clinical data) and direct life-span measurement (biotin-labeled data) methods were analyzed using non-linear mixed effects models. Analysis showed that: (1) predictions from non-steady state data will depend on the RBC model chosen; (2) the transit compartment model, which considers variation in life-span in the RBC population, better describes RBC survival data than the random destruction or homogenous life-span models; and (3) the additional incorporation of random destruction patterns, although improving the description of the RBC survival data, does not appear to provide a marked improvement when describing clinical data.

Retirement as a “language related major life event” and its consequences on the multilingualism of migrants

The present study investigates life stories of established Italian workforce migrants living in the city of Berne, Switzerland, in regard to “language related major life events” (De Bot, 2007). These events are important in terms of changes happening in the linguistic setting during the life span and influence language development. In this sense, during the process of retirement, a new phase of life begins, which, amongst other things, has to be reorganized in relation to social contact and language use. One of my main questions is how the subjects handle the changes happening within and after the process of retirement in respect to the use of different languages and how this “language related major life event” is constructed and described by the migrants. One of these changes happens due to the fact that, after retirement, the social network at the workplace (the primary source of language input) can get (partially) lost and with it, the use of the local language. The fact that migrants living in Berne are confronted with diglossia (Standard German and Swissgerman), that the Canton of Berne is bilingual (German and French) and that the migrants' mother tongue (Italian) is one of the Swiss national languages, makes this question even more interesting. A second question will consider the influence of the fact that most of the subjects in question lived with the idea of return migration, but as shown in a previous study (Alter/Vieillesse/Anziani, NFP 32, 1999), only a third returned back while another third remained in the host country and the final third chose the commuting option. I will first examine these processes, changes and influences by using quantitative questionnaires in order to obtain general information on demographic data, the social situation, and a self-assessment of linguistic skills. Secondly, I will use qualitative interviews to get in-depth information of the subjects’ life stories and language biographies. The results of this project are meant to deliver insight into different aspects that have not been looked at in detail to this point: which factors of the life stories of Italian workforce migrants, who decided to remain in Switzerland after retirement, influence the linguistic changes in general and the ones happening around retirement in particular.

A Life Cycle Approach to Investor Protection. ECMI Working Paper No. 1/September 2014

The market for investment products, including both securities and investment funds, is fraught with difficulties for consumers in terms of the ease of comparing products, trust in suppliers and consumer satisfaction. A comprehensive approach to investor protection, developed around the lifecycle of a financial product, may offer the investor greater protection during an investment’s life span. This paper proposes a new approach to investor protection, building on a review of major market failures affecting the origination, distribution and sale of financial products and based on a review of the relevant scientific literature and country experiences. The application of a ‘know-your-product’ principle at origination, a narrower ‘default rule’ for best execution and an ex-ante distinction between advice and ‘information-only’ services are among the options discussed in this paper to enhance the investor protection framework over the lifecycle of a financial product.

Long life hydraulic brake system. Final technical report.

National Highway Traffic Safety Administration, Washington, D.C.

Long life hydraulic brake system. Summary report. Final report.

National Highway Traffic Safety Administration, Washington, D.C.