Trade Shocks and Local Labor Markets' Linkages: Theory and Evidence

In the past few years, there has been a concern among economists and policy makers that increased openness to international trade affects some regions in a country more than others. Recent research has found that local labor markets more exposed to import competition through their initial employment composition experience worse outcomes in several dimensions such as, employment, wages, and poverty. Although there is evidence that regions within a country exhibit variation in the intensity with which they trade with each other and with other countries, trade linkages have been ignored in empirical analyses of the regional effects of trade, which focus on differences in employment composition. In this dissertation, I investigate how local labor markets' trade linkages shape the response of wages to international trade shocks. In the second chapter, I lay out a standard multi-sector general equilibrium model of trade, where domestic regions trade with each other and with the rest of the world. Using this benchmark, I decompose a region's wage change resulting from a national import cost shock into a direct effect on prices, holding other endogenous variables constant, and a series of general equilibrium effects. I argue the direct effect provides a natural measure of exposure to import competition within the model since it summarizes the effect of the shock on a region's wage as a function of initial conditions given by its trade linkages. I call my proposed measure linkage exposure while I refer to the measures used in previous studies as employment exposure. My theoretical analysis also shows that the assumptions previous studies make on trade linkages are not consistent with the standard trade model. In the third chapter, I calibrate the model to the Brazilian economy in 1991--at the beginning of a period of trade liberalization--to perform a series of experiments. In each of them, I reduce the Brazilian import cost by 1 percent in a single sector and I calculate how much of the cross-regional variation in counterfactual wage changes is explained by exposure measures. Over this set of experiments, employment exposure explains, for the median sector, 2 percent of the variation in counterfactual wage changes while linkage exposure explains 44 percent. In addition, I propose an estimation strategy that incorporates trade linkages in the analysis of the effects of trade on observed wages. In the model, changes in wages are completely determined by changes in market access, an endogenous variable that summarizes the real demand faced by a region. I show that a linkage measure of exposure is a valid instrument for changes in market access within Brazil. By using observed wage changes in Brazil between 1991-2000, my estimates imply that a region at the 25th percentile of the change in domestic market access induced by trade liberalization, experiences a 0.6 log points larger wage decline (or smaller wage increase) than a region at the 75th percentile. The estimates from a regression of wages changes on exposure imply that a region at the 25th percentile of exposure experiences a 3 log points larger wage decline (or smaller wage increase) than a region at the 75th percentile. I conclude that estimates based on exposure overstate the negative impact of trade liberalization on wages in Brazil. In the fourth chapter, I extend the standard model to allow for two types of workers according to their education levels: skilled and unskilled. I show that there is substantial variation across Brazilian regions in the skill premium. I use the exogenous variation provided by tariff changes to estimate the impact of market access on the skill premium. I find that decreased domestic market access resulting from trade liberalization resulted in a higher skill premium. I propose a mechanism to explain this result: that the manufacturing sector is relatively more intensive in unskilled labor and I show empirical evidence that supports this hypothesis.

Experientialist Epistemology and Classification Theory: Embodied and Dimensional Classification

What theoretical framework can help in building, maintaining and evaluating networked knowledge organization resources? Specifically, what theoretical framework makes sense of the semantic prowess of ontologies and peer-to-peer sys- tems, and by extension aids in their building, maintenance, and evaluation? I posit that a theoretical work that weds both for- mal and associative (structural and interpretive) aspects of knowledge organization systems provides that framework. Here I lay out the terms and the intellectual constructs that serve as the foundation for investigative work into experientialist classifi- cation theory, a theoretical framework of embodied, infrastructural, and reified knowledge organization. I build on the inter- pretive work of scholars in information studies, cognitive semantics, sociology, and science studies. With the terms and the framework in place, I then outline classification theory s critiques of classificatory structures. In order to address these cri- tiques with an experientialist approach an experientialist semantics is offered as a design commitment for an example: metadata in peer-to-peer network knowledge organization structures.

A study of the performance appraisal interview; a study carried out in the Small Aircraft Engine Department at the Lynn Plant,

Cover title.

Particle and gaseous emissions from compressed natural gas and ultralow sulphur diesel-fuelled buses at four steady engine loads

Exhaust emissions from thirteen compressed natural gas (CNG) and nine ultralow sulphur diesel in-service transport buses were monitored on a chassis dynamometer. Measurements were carried out at idle and at three steady engine loads of 25%, 50% and 100% of maximum power at a fixed speed of 60 kmph. Emission factors were estimated for particle mass and number, carbon dioxide and oxides of nitrogen for two types of CNG buses (Scania and MAN, compatible with Euro 2 and 3 emission standards, respectively) and two types of diesel buses (Volvo Pre-Euro/Euro1 and Mercedez OC500 Euro3). All emission factors increased with load. The median particle mass emission factor for the CNG buses was less than 1% of that from the diesel buses at all loads. However, the particle number emission factors did not show a statistically significant difference between buses operating on the two types of fuel. In this paper, for the very first time, particle number emission factors are presented at four steady state engine loads for CNG buses. Median values ranged from the order of 1012 particles min-1 at idle to 1015 particles km-1 at full power. Most of the particles observed in the CNG emissions were in the nanoparticle size range and likely to be composed of volatile organic compounds The CO2 emission factors were about 20% to 30% greater for the diesel buses over the CNG buses, while the oxides of nitrogen emission factors did not show any difference due to the large variation between buses.

HyperCard test engine using Rasch Analysis

This paper will focus on the development of an interactive test engine using Rasch analysis of item responses for question selection and reporting of results. The Rasch analysis is used to determine student ability and question difficulty. This model is widely used in the preparation of paper-based tests and has been the subject of particular use and development at the Australian Council for Education Research (ACER). This paper presents an overview of an interactive implementation of the Rasch analysis model in HyperCard, where student ability estimates are generated 'on the fly' and question difficulty values updated from time to time. The student ability estimates are used to determine question selection and are the basis of scoring and reporting schemes.

Underwater emissions from a two-stroke outboard engine : a comparison between an EAL and an equivalent mineral lubricant

The emissions to water from a 1.9 kW two-stroke outboard engine were investigated in the laboratory and in the field, with the primary objective being to characterise and quantify the pollutants that remain within the water column. The emission rates of polycyclic aromatic hydrocarbons (PAHs) and volatile organic compounds (VOCs) were determined for the engine when using a mineral and an equivalent environmentally adapted lubricant (EAL). A comparison of the emission rates was conducted between the results from the fresh and sea water tests. The results showed that there was little difference in the emission rates of these pollutants when either of the lubricants was used in both the fresh and sea water. A further set of tests were done to find out the effect on pH of water due to the underwater emissions and these tests were done using both mineral and environmentally adapted lubricant. The results showed that the type of lubricant does not have any effect on the change in pH of the water.

Lay theories of anorexia nervosa : a discourse analytic study

Previous studies on lay theories of anorexia nervosa have examined the 'accuracy' of lay knowledge, and the identification of factors by family and friends that would encourage early interventions. In contrast to these approaches, we examine lay theories of anorexia nervosa using a critical psychology perspective. We argue that the use of a discourse analysis methodology enables the examination of the construction of lay theories through dominant concepts and ideas. Ten semi-structured interviews with five women and five men aged between 15 and 25 years were carried out. Participants were asked questions about three main aspects of anorexia nervosa: aetiology, treatment and relationship to gender. Each interview was analysed in terms of the structure, function and variability of discourse. Three discourses: sociocultural, individual and femininity, are discussed in relation to the interview questions. We conclude that, in this study, lay theories of anorexia nervosa were structured through key discourses that maintained a separation between sociocultural aspects of anorexia nervosa and individual psychology. This separation exists in dominant psychomedical conceptualizations of anorexia nervosa, reinforcing the concept that it is a form of psychopathology.

“Lay” theories of anorexia nervosa : a discourse analytic study

Previous studies on lay theories of anorexia nervosa have examined the ‘accuracy’ of lay knowledge, and the identification of factors by family and friends that would encourage early interventions (Huon, Brown, & Morris, 1988, 7, 239–252; Murray, Touyz, & Beumont, 1990, 9, 87–93). In contrast to these approaches, we examine lay theories of anorexia nervosa using a critical psychology perspective. We argue that the use of a discourse analysis methodology enables the examination of the construction of lay theories through dominant concepts and ideas. Ten semi-structured interviews with five women and five men aged between 15 and 25 years were carried out. Participants were asked questions about three main aspects of anorexia nervosa: aetiology, treatment and relationship to gender. Each interview was analysed in terms of the structure, function and variability of discourse. Three discourses: sociocultural, individual and femininity, are discussed in relation to the interview questions. We conclude that, in this study, lay theories of anorexia nervosa were structured through key discourses that maintained a separation between sociocultural aspects of anorexia nervosa and individual psychology. This separation exists in dominant psychomedical conceptualizations of anorexia nervosa, reinforcing the concept that it is a form of psychopathology.

Nonlinear Control Design for an Air-breathing Engine with State Estimation

A nonlinear control design approach is presented in this paper for a challenging application problem of ensuring robust performance of an air-breathing engine operating at supersonic speed. The primary objective of control design is to ensure that the engine produces the required thrust that tracks the commanded thrust as closely as possible by appropriate regulation of the fuel flow rate. However, since the engine operates in the supersonic range, an important secondary objective is to ensure an optimal location of the shock in the intake for maximum pressure recovery with a sufficient margin. This is manipulated by varying the throat area of the nozzle. The nonlinear dynamic inversion technique has been successfully used to achieve both of the above objectives. In this problem, since the process is faster than the actuators, independent control designs have also been carried out for the actuators as well to assure the satisfactory performance of the system. Moreover, an extended Kalman Filter based state estimation design has been carried out both to filter out the process and sensor noises as well as to make the control design operate based on output feedback. Promising simulation results indicate that the proposed control design approach is quite successful in obtaining robust performance of the air-breathing system.

Jet Engine Health Signal Denoising Using Optimally Weighted Recursive Median Filters

The removal of noise and outliers from health signals is an important problem in jet engine health monitoring. Typically, health signals are time series of damage indicators, which can be sensor measurements or features derived from such measurements. Sharp or sudden changes in health signals can represent abrupt faults and long term deterioration in the system is typical of gradual faults. Simple linear filters tend to smooth out the sharp trend shifts in jet engine signals and are also not good for outlier removal. We propose new optimally designed nonlinear weighted recursive median filters for noise removal from typical health signals of jet engines. Signals for abrupt and gradual faults and with transient data are considered. Numerical results are obtained for a jet engine and show that preprocessing of health signals using the proposed filter significantly removes Gaussian noise and outliers and could therefore greatly improve the accuracy of diagnostic systems. [DOI: 10.1115/1.3200907].

Nonlinear Sliding Mode Control Design for an Air-breathing Engine with State Estimation

A modern system theory based nonlinear control design is discussed in this paper for successful operation of an air-breathing engine operating at supersonic speed. The primary objective of the control design of such an air-breathing engine is to ensure that the engine dynamically produces the thrust that tracks a commanded value of thrust as closely as possible by regulating the fuel flow to the combustion system. However, since the engine operates in the supersonic range, an important secondary objective is to manage the shock wave configuration in the intake section of the engine which is manipulated by varying the throat area of the nozzle. A nonlinear sliding mode control technique has been successfully used to achieve both of the above objectives. In this problem, since the process is faster than the actuators, independent control designs are also carried out for the actuators as well to assure the satisfactory performance of the system. Moreover, to filter out the sensor and process noises and to estimate the states for making the control design operate based on output feedback, an Extended Kalman Filter based state estimation design is also carried out. The promising simulation results suggest that the proposed control design approach is quite successful in obtaining robust performance of the air-breathing engine.