In-situ X-ray micro-diffraction studies of heterogeneous interfaces between cementitious materials and geological formations

In the present study the challenge of analyzing complex micro X-ray diffraction (microXRD) patterns from cement–clay interfaces has been addressed. In order to extract the maximum information concerning both the spatial distribution and the crystal structure type associated with each of the many diffracting grains in heterogeneous, polycrystalline samples, an approach has been developed in which microXRD was applied to thin sections which were rotated in the X-ray beam. The data analysis, performed on microXRD patterns collected from a filled vein of a cement–clay interface from the natural analogue in Maqarin (Jordan), and a sample from a two-year-old altered interface between cement and argillaceous rock, demonstrate the potential of this method.

Geometrical characterization of undisturbed soil samples using X-ray computed tomography image analysis. Effect of soil management on soil structure

El estudio de la estructura del suelo es de vital importancia en diferentes campos de la ciencia y la tecnología. La estructura del suelo controla procesos físicos y biológicos importantes en los sistemas suelo-planta-microorganismos. Estos procesos están dominados por la geometría de la estructura del suelo, y una caracterización cuantitativa de la heterogeneidad de la geometría del espacio poroso es beneficiosa para la predicción de propiedades físicas del suelo. La tecnología de la tomografía computerizada de rayos-X (CT) nos permite obtener imágenes digitales tridimensionales del interior de una muestra de suelo, proporcionando información de la geometría de los poros del suelo y permitiendo el estudio de los poros sin destruir las muestras. Las técnicas de la geometría fractal y de la morfología matemática se han propuesto como una poderosa herramienta para analizar y cuantificar características geométricas. Las dimensiones fractales del espacio poroso, de la interfaz poro-sólido y de la distribución de tamaños de poros son indicadores de la complejidad de la estructura del suelo. Los funcionales de Minkowski y las funciones morfológicas proporcionan medios para medir características geométricas fundamentales de los objetos geométricos tridimensionales. Esto es, volumen, superficie, curvatura media de la superficie y conectividad. Las características del suelo como la distribución de tamaños de poros, el volumen del espacio poroso o la superficie poro-solido pueden ser alteradas por diferentes practicas de manejo de suelo. En este trabajo analizamos imágenes tomográficas de muestras de suelo de dos zonas cercanas con practicas de manejo diferentes. Obtenemos un conjunto de medidas geométricas, para evaluar y cuantificar posibles diferencias que el laboreo pueda haber causado en el suelo. ABSTRACT The study of soil structure is of vital importance in different fields of science and technology. Soil structure controls important physical and biological processes in soil-plant-microbial systems. Those processes are dominated by the geometry of soil pore structure, and a quantitative characterization of the spatial heterogeneity of the pore space geometry is beneficial for prediction of soil physical properties. The technology of X-ray computed tomography (CT) allows us to obtain three-dimensional digital images of the inside of a soil sample providing information on soil pore geometry and enabling the study of the pores without disturbing the samples. Fractal geometry and mathematical morphological techniques have been proposed as powerful tools to analyze and quantify geometrical features. Fractal dimensions of pore space, pore-solid interface and pore size distribution are indicators of soil structure complexity. Minkowski functionals and morphological functions provide means to measure fundamental geometrical features of three-dimensional geometrical objects, that is, volume, boundary surface, mean boundary surface curvature, and connectivity. Soil features such as pore-size distribution, pore space volume or pore-solid surface can be altered by different soil management practices. In this work we analyze CT images of soil samples from two nearby areas with contrasting management practices. We performed a set of geometrical measures, some of them from mathematical morphology, to assess and quantify any possible difference that tillage may have caused on the soil.

Complexos de dirutênio com os fármacos ibuprofeno, ácido acetilsalicílico, naproxeno, indometacina, e com ácido y-linolêncio: Síntese, caracterização, avaliação da ação antiproliferativa sobre células tumorais e estudo da interação da unidade dimetálica com adenina e adenosina

Este trabalho tem como principal objetivo contribuir para o desenvolvimento de novos potenciais metalofármacos de rutênio. Nele são descritas a síntese, a caracterização e a avaliação da ação antiproliferativa de alguns complexos de dirutênio (II,III) com os fármacos antiinflamatórios não-esteróides (AINEs): ibuprofeno (ibp), ácido acetilsalicílico (aas), naproxeno (npx) e indometacina (ind) e também com o ácido γ-linolênico (lin), sobre células cancerígenas. Os compostos obtidos foram caracterizados por análise elementar, espectroscopia de absorção eletrônica, medidas de susceptibilidade magnética, espectroscopia vibracional FTIR e Raman, difratometria de raios X de pó, medidas de condutividade molar e análise térmica (TG, OTAe OSC). Todos os complexos sintetizados apresentam estrutura em gaiola, com os carboxilatos derivados dos fármacos AINEs coordenados à unidade dimetálica Ru2( (II,III), em ponte equatorial, estabilizando assim a ligação direta rutênio-rutênio. As posições axiais são ocupadas por íons cloreto, no caso dos complexos [Ru2(O2(CR)4(Cl] (O2(CR = ibp, aas, npx ou ind), ou por moléculas de água, nas espécies do tipo [Ru2(O2(CR)4(H2O)2]PF6(O2CR =npx e ind). Ensaios biológicos demonstraram que os compostos [Ru2(ibp) 4Cl]•½H2O e [Ru2(npx)4(H2O)2]PF6 apresentam ação antiproliferativa sobre células de glioma de rato C6 in vitro, dependendo do tempo de exposição do meio celular ao complexo. O complexo [Ru2 (lin)4Cl] também apresenta efeito sobre a proliferação de células C6; entretanto, nesse caso, efeitos significativos são observaçlos já nas primeiras 24 h de exposição. Estudos mostraram que as bases adenina e adenosina reagem com o complexo [Ru2(OAc)4(H2O)2]PF6 sem que ocorra quebra da estrutura em gaiola. As bases nitrogenadas substituem axialmente as moléculas de água, formando pontes axiais entre duas unidades de dirutênio (II,III) no estado sólido.

Micropartículas de quitosana estruturadas com aerosil®: estabilidade, adsorção, encapsulação e liberação de substâncias ativas

Biodegradable microspheres used as controlled release systems are important in pharmaceutics. Chitosan biopolymer represents an attractive biomaterial alternative because of its physicochemical and biological characteristics. Chitosan microspheres are expected to become promising carrier systems for drug and vaccine delivery, especially for non-invasive ways oral, mucosal and transdermal routes. Controlling the swelling rate and swelling capacity of the hydrogel and improving the fragile nature of microspheres under acidic conditions are the key challenges that need to be overcomed in order to enable the exploration of the full pharmaceutical potential use of these microparticles. Many studies have focused on the modification of chitosan microsphere structures with cross-linkers, various polymers blends and new organic-inorganic hybrid systems in order to obtain improved properties. In this work, microspheres made of chitosan and nanosized hydrophobic silica (Aerosil R972) were produced by a method consisting of two steps. First, a preparation of a macroscopically homogeneous chitosan-hydrophobic silica dispersion was prepared followed by spray drying. FTIR spectroscopy, X-ray powder diffraction, differential scanning calorimetry, thermal gravimetric analysis, scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (TEM) were used to characterize the microspheres. Also, the were conducted acid stability, moisture sorption capacity, release properties and biological assays. The chitosan-hydrophobic silica composite microspheres showed improved thermal degradation, lower water affinity, better acid stability and ability to retard rifampicin and propranolol hydrochloride (drug models) release under simulated physiological conditions. In vitro biocompatibility studies indicated low cytotoxicity and low capacity to activate cell production of the pro-inflammatory mediator nitric oxide. The results show here encourage further studies on the use of the new chitosan-hydrophobic silica composite microspheres as drug carrier systems via oral or nasal routes.

Activities in the $FeTiO_{3}-NiTiO_{3}$ Solid Solution from Alloy-Oxide Equilibria at 1273 K

Nine tie-lines between Fe-Ni alloys and FeTiO3-NiTiO3 solid solutions were determined at 1273 K. Samples were equilibrated in evacuated quartz ampoules for periods up to 10 days. Compositions of the alloy and oxide phases at equilibrium were determined by energy-dispersive x-ray spectroscopy. X-ray powder diffraction was used to confirm the results. Attainment of equilibrium was verified by the conventional tie-line rotation technique and by thermodynamic analysis of the results. The tie-lines are skewed toward the FeTiO3 corner. From the tie-line data and activities in the Fe-Ni alloy phase available in the literature, activities of FeTiO3 and NiTiO3 in the ilmenite solid solution were derived using the modified Gibbs-Duhem technique of Jacob and Jeffes [K.T. Jacob and J.H.E. Jeffes, An Improved Method for Calculating Activities from Distribution Equilibria, High Temp. High Press., 1972, 4, p 177-182]. The components of the oxide solid solution exhibit moderate positive deviations from Raoult's law. Within experimental error, excess Gibbs energy of mixing for the FeTiO3-NiTiO3 solid solution at 1273 K is a symmetric function of composition and can be represented as: Delta G(E) = 8590 (+/- 200) X-FeTiO3 X-NiTiO3 J/mol Full spectrum of tie-lines and oxygen potentials for the three-phase equilibrium involving Fe-Ni alloys, FeTiO3-NiTiO3 solid solutions, and TiO2 at 1273 K were computed using results obtained in this study and data available in the literature.

Synthesis and characterization of a new sulphate derivative of hydrazine, N2H5HSO4

Hydrazinium(1 +) hydrogensulphate, N2H5HSO4, has been prepared for the first time by the reaction of solid ammonium hydrogensulphate with hydrazine monohydrate. The compound has been characterized by chemical analysis, infrared spectra, and X-ray powder diffraction. Thermal properties of N2H5HSO4 have been investigated using differential thermal analysis and thermogravimetric analysis and compared with those of N2H6SO4 and (N2H5)2SO4.

Synthesis and characterization of a new sulfate derivative of hydrazine, n2h5hso4

Hydrazinium(1 +) hydrogensulphate, N2H5HS04, has been prepared for the first time by the reaction of solid ammonium hydrogensulphate with hydrazine monohydrate. The compound has been characterized by chemical analysis, infrared spectra, and X-ray powder diffraction. Thermal properties of N2H5HS04 have been investigated using differential thermal analysis and thermogravimetric analysis and compared with those of N2H6S04 and (N2H5)2S04.

Coordination-Induced Formation of One-Dimensional Nanostructures of Europium Benzene-1,3,5-tricarboxylate and Its Solid-State Thermal Transformation

Novel one-dimensional europium benzene-1,3,5-tricarboxylate compressed nanorods have been synthesized oil it large scale through direct precipitation in solution phase under moderate conditions without the assistance of any surfactant, catalyst, or template. The obtained nanorods have widths of about 50-100 not, thicknesses of 10-20 nm, and lengths ranging from a few hundred nanometers to several micrometers. X-ray powder diffraction. elemental analysis, Fourier transform infrared Studies, and thermogravimetric and differential thermal analysis show that the nanorods have the structural formula of Eu(1,3,5-BTC)center dot 6H(2)O. Upon UV excitation, these nanorods exhibit a highly efficient luminescence. which comes from the Eu3+ ions. Moreover, Eu2O3 nanorods Could also be obtained via a thermal decomposition method using the corresponding complex as a precursor. This synthetic route is promising for the preparation of other one-dimensional crystalline nanomaterials because of its simplicity and the low cost of the starting reagents.

Surprising arching sheet-like dendrites growing from BaF2 nanocubes

BaF2 nanocubes were prepared from quaternary reverse micelles of cetyl trimethyl ammonium bromide (CTAB), n-butanol, n-octane, and water. Interestingly, there are arching sheet-like dendrites growing between two neighbouring sides of these cubes. X-ray powder diffraction (XRD) analysis showed that the products were BaF2 single phase. Scanning electron microscopy (SEM) or transition electron microscopy (TEM) was used to estimate the size of the final products. The results showed that the shape and size of particles were strongly dependent on the reaction conditions, such as the temperature and reaction time. When the reaction temperature was 25 degreesC, we obtained cuboid-like particles with 'clean' surfaces (no dendrites growing on them), and when the temperature was 35 degreesC, we obtained nanocubes with dendrites growing from them between the neighbouring sides. The influence of reaction time at a temperature of 35 degreesC is also discussed.

Synthesis of barium fluoride nanoparticles from microemulsion

The cetyltrimethylammonium bromide (CTAB)/2-octanol/water microemulsion system was used to synthesize barium fluoride nanoparticles. X-ray powder diffraction (XRD) analysis showed that the products were single phase. The results of scanning electron microscopy and calculations using the Scherrer equation from the line widths of the XRD have been used to estimate the average particle sizes of the powder products. The results showed that the nanoparticle size was affected by water content and surfactant (CTAB) concentration. As water content decreases from 14.2 to 9.47% (w/w), the particle size decreases from 75 to 40 rim. In addition, increasing the reaction times from 5 to 120 min increases the particle size from 75 to 150 rim, and increasing the amount of surfactant decreases the size of the particle. Luminescence spectra of the BaF2:Ce nanoparticles are also discussed.

Síntese de ésteres catalisada por fosfatos e fosfonatos metálicos(IV)

No âmbito do Mestrado em Química, com especialização em Química Orgânica e Produtos Naturais, será apresentado nesta dissertação o trabalho desenvolvido sobre a síntese e caracterização de fosfatos e fosfonatos metálicos tetravalentes, assim como a avaliação da sua capacidade catalítica em reações de esterificação. Iniciou-se este trabalho pela síntese de vários fosfatos e fosfonatos metálicos tetravalentes, que apresentam a fórmula geral MIV(HXO4)2.nH2O e MIV(RXO3)2.nH2O, respetivamente, onde MIV = Zr, X = P, W, Mo e R = grupo orgânico. Os compostos sintetizados foram caracterizados por espetroscopia de infravermelho, difração de raios-X de pós e por análise elementar e termogravimétrica. Os fosfatos e fosfonatos metálicos tetravalentes foram avaliados como catalisadores em reações de esterificação de Fischer entre os ácidos acético, ou benzóico, e diferentes álcoois. Após esta avaliação foram efetuados estudos de otimização das condições reacionais para a síntese de cada éster. Em cada um dos casos foi utilizado o catalisador com o qual se obtiveram os melhores rendimentos nos estudos iniciais, ou seja com o molibdato-fenilfosfonato de zircónio(IV), ZrMoPhP. Todas as reações foram monitorizadas por cromatografia gasosa ou por cromatografia líquida de alta pressão. Todos os ésteres foram identificados por comparação com os padrões correspondentes.

Sprühgetrocknete Polylaktid, Poly(laktid-co-glykolid) Mikropartikel zur Steuerung der Freisetzung aus pulmonalen Arzneiformen

Zusammenfassung Die vorliegende Arbeit hat zum Ziel, pharmazeutisch-technologische Möglichkeiten der Retardierung bei ausgewählten Antiasthmatika zur pulmonalen Applikation anzuwenden. Dafür sollten Mikropartikel hergestellt und pharmazeutisch sowie biopharmazeutisch charakterisiert werden. Als Modellsubstanzen werden das Glukokortikoid Budesonid und das β2-Sympathomimetikum Salbutamol in Form seiner Base und seines Salzes verwendet. Die Auswahl erfolgt nach physikochemischen (Lipophilie, Molekulargewicht) und therapeutischen (Halbwertszeit der Wirkung, Applikationsfrequenz) Gesichtspunkten. Mikropartikel auf Polymerbasis ermöglichen eine kontrollierte Freigabe der Arzneistoffe über einen vorausbestimmten Zeitraum. Es erfolgt die Auswahl physiologisch unbedenklicher Hilfsstoffe (Polylaktide R 202H/ Poly(laktid-co-glykolide) RG 502H, RG 752-S) mit unterschiedlichen Anteilen an Coglykolid sowie unterschiedlichen Molekulargewichten, die sich prinzipiell zur Verzögerung der Freisetzung eignen und sich bei der parenteralen Applikation bereits bewährt haben. Die Sprühtrocknung wird als geeignetes pharmazeutisch-technologisches Verfahren zur Präparation von Mikropartikeln im Teilchengrößenbereich von 1- 10 Mikrometern beschrieben, welche den Wirkstoff mit möglichst hoher Beladung verkapselt. Die sprühgetrockneten Pulver sollen pharmazeutisch physikochemisch mittels Rasterelektronenmikroskopie (Morphologie), Laserdiffraktometrie (Teilchengrößenverteilung), DSC und Röntgenpulverdiffraktometrie (thermisches Verhalten) und mittels Stickstoff-Tief-Temperatur Adsorptionsverfahren (spezifische Oberfläche) charakterisiert werden. Zusätzlich wird die Wirkstoffbeladung der sprühgetrockneten Polymer-Mikropartikel mittels HPLC ermittelt. Die biopharmazeutische Charakterisierung der sprühgetrockneten Pulver erfolgt über die in-vitro Freigabekinetik und die Stabilität der Mikropartikel. Zusätzlich werden Versuche an Zellkulturen und in-vivo Versuche an Mäusen durchgeführt, um die Effekte der sprühgetrockneten Mikropartikel und des Hilfsstoffs hinsichtlich der Freisetzungsretardierung zu testen. Bei den in-vivo Versuchen werden der Atemwegswiderstand und die Verlängerung der exspiratorischen Phase (penh) als Parameter für einen antiasthmatischen Effekt gewählt. Die Lungenlavage Flüssigkeit wird zusätzlich überprüft. Die Ergebnisse zeigen, dass es mit Hilfe der Sprühtrocknung möglich ist, Polymer-Mikropartikel herzustellen, die aufgrund ihrer Partikelgröße von d50 ≤ 5,8 µm fähig sind, die unteren Abschnitte der Lunge zu erreichen. Die Morphologie der Mikropartikel ist abhängig vom zu versprühenden Produkt. Thermodynamisch und röntgenpulverdiffraktometrisch betrachtet handelt es sich um amorphe Produkte, die aber über lange Zeit in diesem Zustand stabil sind. Die Wiederfindung der eingesetzten Arzneistoffmenge in den sprühgetrockneten Polymer-Mikropartikeln und die Freigabeversuche zur Charakterisierung der Retardierungseigenschaften der verwendeten Polymere ergeben, dass es mit Hilfe der Sprühtrocknung von Budesonid und Salbutamol mit den Polymeren möglich ist, retardierende Mikropartikel herzustellen. Die Wiederfindung von Budesonid und Salbutamol in den sprühgetrockneten Polymer-Mikropartikeln entspricht nahezu der eingesetzten Menge. Bei Salbutamolsulfat ist dies nicht der Fall. In Zellkulturversuchen der murinen Zellinie RAW 264.7 ergaben sich Hinweise darauf, dass bei Konzentrationen von 10-6 M und 10-8 M, die Downregulation der IL-6 Konzentration durch die Sprüheinbettung von 9,1 % Budesonid mit PLGA in stärkerem Ausmaß erfolgte, als bei unverkapseltem Budesonid. Zusätzlich wurden in-vivo Versuche mit intranasaler und intraperitonealer Gabe durchgeführt. Die Budesonid-Polymer Sprüheinbettung wurde mit unverkapseltem Budesonid vergleichen. Nach intraperitonealer Gabe hatte die Sprüheinbettung mit Budesonid die besten Effekte hinsichtlich der Unterdrückung des penh und des Atemwegswiderstands auch bei steigenden Metacholinkonzentrationen. Die Auswertung der Lungenlavage Flüssigkeit zeigt sehr deutlich die Downregulation der IL-6 Konzentration in der Lunge durch die Sprüheinbettung mit Budesonid. Zur Zeit werden Vorbereitungen getroffen, ein Gerät zu testen, das in der Lage ist, ein Mikrospray zu generieren, so dass eine intratracheale Verabreichung möglich wäre.

Synthesis and characterization of hydroxyapatite modified with (9r)-9-hydroxystearic acid

(9R)-9-hydroxystearic acid (9R-HSA) has been proven to have antitumoral activity because it is shown to inhibit histone deacetylase 1, an enzyme which activates DNA replication, and the (R)-enantiomer has been shown to be more active than the (S)-enantiomer both in vitro and by molecular docking. Hydroxyapatite is the main mineral component of bone and teeth and has been used for over 20 years in prostheses and their coating because it is biocompatible and bioactive. The goal of incorporating 9R-HSA into hydroxyapatite is to have a material that combines the bioactivity of HA with the antitumoral properties of 9R-HSA. In this work, 9R-HSA and its potassium salt were synthesized and the latter was also incorporated into hydroxyapatite. The content of (R)-9-hydroxystearate ion incorporated into the apatitic structure was shown to be a function of its concentration in solution and can reach values higher than 8.5%. (9R)-9-hydroxystearic acid modified hydroxyapatite was extensively characterized to determine the effect of the incorporation of the organic molecule. This incorporation does not significantly alter the unit cell but reduces the size of both the crystals as well as the coherent domains, mainly along the a-axis of hydroxyapatite. This is believed to be due to the coordination of the negatively charged carboxylate group to the calcium ions which are more exposed on the (100) face of the crystal, therefore limiting the growth mainly in this direction. Further analyses showed that the material becomes hydrophobic and more negatively charged with the addition of 9R-HSA but both of these properties reach a plateau at less than 5% wt of 9R-HSA.

New A2+Mo4+O3 oxides with defect spinel structure

New A2+Mo4+O3 oxides for A = Mn, Co and Zn crystallizing in a defect spinel structure have been prepared by hydrogen-reduction of the corresponding AMoO4 oxides. X-ray powder diffraction intensity analysis of the zinc compound indicates that the cation distribution is (Zn)t[Zn1/3Mo4/3□1/3]oO4. The defect spinels are metastable decomposing to a mixture of A2Mo3O8 and AO at high temperatures. Electrical and magnetic properties of the spinel phases are reported.