Using national input-output data for embodied energy analysis of individual residential buildings

Embodied energy (EE) analysis has become an important area of energy research, in attempting to trace the direct and indirect energy requirements of products and services throughout their supply chain. Typically, input-output (I-O) models have been used to calculate EE because they are considered to be comprehensive in their analysis. However, a major deficiency of using I-O models is that they have inherent errors and therefore cannot be reliably applied to individual cases. Thus, there is a need for the ability to disaggregate an I-O model into its most important 'energy paths', for the purpose of integrating case-specific data. This paper presents a new hybrid method for conducting EE analyses for individual buildings, which retains the completeness of the I-O model. This new method is demonstrated by application to an Australian residential building. Only 52% of the energy paths derived from the I-O model were substituted using case-specific data. This indicates that previous system boundaries for EE studies of individual residential buildings are less than optimal. It is envisaged that the proposed method will provide construction professionals with more accurate and reliable data for conducting life cycle energy analysis of buildings. Furthermore, by analysing the unmodified energy paths, further data collection can be prioritized effectively.

Comparison of multifactor productivity indicators for real estate sectors using the OECD input-output database

"Research on the international comparison of productivity has gained significant interest throughout several previous decades. Relatively little work has however been done in the real estate sector. This paper aims to develop a new productivity measurement framework for the international comparison of the real estate sector based on the newly-published OECD input-output database. Three multifactor productivity indicators are formulated using the ratio of the sectoral final demand to value added, the intermediate output to intermediate input and the total output to total input effect respectively in the input-output table. Historical analyses and comparisons are also carried out to indicate the differences of productivities of the real estate sectors in seven selected countries. Findings can improve the understanding of how technological, organisational and policy influences combine to affect productivity growth and aid the policy makers, real estate agencies and researchers in evaluating the competitive ability of the real estate sector."

Validation of the use of input-output data for embodied energy analysis of the Australian construction industry

This paper evaluates a recently developed hybrid method for the embodied energy analysis of the Australian construction industry. It was found that the truncation associated with process analysis can be up to 80%, whilst the use of input-output analysis alone does not always provide a perfect model for replacing process data. There is also a considerable lack in the quantity and possibly quality of process data currently available. These findings suggest that current best-practice methods are sufficiently accurate for most typical applications, but this is heavily dependant upon data quality and availability. The hybrid method evaluated can be used for the optimisation of embodied energy and for identifying opportunities for improvements in energy efficiency.

Economic indicator comparisons of international real estate sectors using the OECD input-output database

With its growing share in national economies, the real estate sector has been considered a vital contributor of economic development. Research efforts are needed in order to gain a better comprehension of the national specificities of the real estate sector and to identify its role in economic development. Due to limited comparable data, the economic indicators of real estate sectors are hard to compare between different countries. This paper aims to explore the quantitative interdependence amongst the real estate sector and other industries in developed economies using input-output analysis, and to investigate their significant linkages. Based on the recently published Organisation for Economic Co-operation and Development (OECD) input-output database at constant prices, the analysis focuses on the real estate's escalating role in terms ofshares in gross output, value added and gross national product. With emphasis on the relative role of manufacturing, construction and services inputs, this paper also highlights the strengths of the push and pull of the real estate sector.

Multifactor productivity measures of construction sectors using OECD input-output database

This research develops a new productivity measurement framework for the construction sector in the light of an input-output table. Three group multifactor productivity indicators are formulated based on the multiplier concepts in the input-output analysis. This measurement framework focuses on the intro-industry flows of products and considers the direct and indirect effects of input and output. Moreover, this framework enables us to measure the multifactor productivity of a specific sector systematically. Historical analyses and international comparisons are carried out to indicate the differences of the productivity of the construction sectors in seven selected countries, using the newly published OECD input-output database. Research findings are expected to clarify how technological, organizational and political factors affect the productivity growth, enabling the policy makers, construction businesses and researchers to quantify the competitive ability of the construction sector.

Validation of the use of Australian input-output data for building embodied energy simulation

Traditional!y, the simulation of buildings has focused 011 operational energy consumption in an attempt to determine the potential for energy savings. Whilst operational energy of Australian buildings accounts for around 20% of total energy consumption nationally, embodied energy represents 20 to 50 times the annual operational energy of 1110st Australian buildings. Lower values have been shown through a number of studies that have analysed the embodied energy of buildings and their products, however these have now shown to be incomplete in system boundary. Many of these studies have used traditional embodied energy analysis methods, such as process analysis and input-output analysis, Hybrid embodied energy analysis methods have been developed, but these need to be compared and validated. This paper reports on preliminary work on this topic. The findings so far suggest that current best-practice methods are sufficiently accurate for most typical applications, but this is heavily dependant upon data quality and availability.

An input-output approach for measuring real estate sector linkages

This research aims to measure and compare the total, backward, forward, internal and sectoral linkages of the real estate sector using the hypothetical extraction method over 30 years and explore the role of this sector in national economies and the quantitative interdependence between the real estate sector and the remaining sectors from a new angle. Empirical results show an increasing trend of these linkages, which confirms the increasing role of the real estate sector with economic maturity over the examined period. On the other hand, the significant rank correlations in the linkages imply that the importance of real estate remained fairly stable among highly developed economies over the examined period. This may supply a tool to signal the maturity of an entire economy. Furthermore, the findings can aid both governments making relative policies and businesses choosing strategic partners and location strategies.

Using input-output data in life cycle inventory analysis

The impacts on the environment from human activities are of increasing concern. The need to consider the reduction in energy consumption is of particular interest, especially in the construction and operation of buildings, which accounts for between 30 and 40% of Australia's national energy consumption. Much past and more recent emphasis has been placed on methods for reducing the energy consumed in the operation of buildings. With the energy embodied in these buildings having been shown to account for an equally large proportion of a building's life cycle energy consumption, there is a need to look at ways of reducing the embodied energy of buildings and related products. Life cycle assessment (LCA) is considered to be the most appropriate tool for assessing the life cycle energy consumption of buildings and their products. The life cycle inventory analysis (LCIA) step of a LCA, where an inventory of material and energy inputs is gathered, may currently suffer from several limitations, mainly concerned with the use of incomplete and unreliable data sources and LCIA methods. These traditional methods of LCIA include process-based and input-output-based LCIA. Process-based LCIA uses process specific data, whilst input-output-based LCIA uses data produced from an analysis of the flow of goods and services between sectors of the Australian economy, also known as input-output data. With the incompleteness and unreliability of these two respective methods in mind, hybrid LCIA methods have been developed to minimise the errors associated with traditional LCIA methods, combining both process and input-output data. Hybrid LCIA methods based on process data have shown to be incomplete. Hybrid LCIA methods based on input-output data involve substituting available process data into the input-output model minimising the errors associated with process-based hybrid LCIA methods. However, until now, this LCIA method had not been tested for its level of completeness and reliability. The aim of this study was to assess the reliability and completeness of hybrid life cycle inventory analysis, as applied to the Australian construction industry. A range of case studies were selected in order to apply the input-output-based hybrid LCIA method and evaluate the subsequent results as obtained from each case study. These case studies included buildings: two commercial office buildings, two residential buildings, a recreational building; and building related products: a solar hot water system, a building integrated photovoltaic system and a washing machine. The range of building types and products selected assisted in testing the input-output-based hybrid LCIA method for its applicability across a wide range of product types. The input-output-based hybrid LCIA method was applied to each of the selected case studies in order to obtain their respective embodied energy results. These results were then evaluated with the use of a number of evaluation methods. These evaluation methods included an analysis of the difference between the process-based and input-output-based hybrid LCIA results as an evaluation of the completeness of the process-based LCIA method. The second method of evaluation used was a comparison between equivalent process and input-output values used in the input-output-based hybrid LCIA method as a measure of reliability. It was found that the results from a typical process-based LCIA and process-based hybrid LCIA have a large gap when compared to input-output-based hybrid LCIA results (up to 80%). This gap has shown that the currently available quantity of process data in Australia is insufficient. The comparison between equivalent process-based and input-output-based LCIA values showed that the input-output data does not provide a reliable representation of the equivalent process values, for material energy intensities, material inputs and whole products. Therefore, the use of input-output data to account for inadequate or missing process data is not reliable. However, as there is currently no other method for filling the gaps in traditional process-based LCIA, and as input-output data is considered to be more complete than process data, and the errors may be somewhat lower, using input-output data to fill the gaps in traditional process-based LCIA appears to be better than not using any data at all. The input-output-based hybrid LCIA method evaluated in this study has shown to be the most sophisticated and complete currently available LCIA method for assessing the environmental impacts associated with buildings and building related products. This finding is significant as the construction and operation of buildings accounts for a large proportion of national energy consumption. The use of the input-output-based hybrid LCIA method for products other than those related to the Australian construction industry may be appropriate, especially if the material inputs of the product being assessed are similar to those typically used in the construction industry. The input-output-based hybrid LCIA method has been used to correct some of the errors and limitations associated with previous LCIA methods, without the introduction of any new errors. Improvements in current input-output models are also needed, particularly to account for the inclusion of capital equipment inputs (i.e. the energy required to manufacture the machinery and other equipment used in the production of building materials, products etc.). Although further improvements in the quantity of currently available process data are also needed, this study has shown that with the current available embodied energy data for LCIA, the input-output-based hybrid LCIA appears to provide the most reliable and complete method for use in assessing the environmental impacts of the Australian construction industry.

An input-output-based linkage measurement framework

This study proposed an input-output-based linkage measurement framework, which is a multi-level hierarchy, omni-direction decision-making model and takes the impact of capital into account. This framework had resolved the critical deficiencies and inherent limitations of the existing methods and was used to explore the real estate and construction linkages.

Análise de ecossistemas aquáticos através do método input-output : estudo de caso lagoa Itapeva (sistema lagunar costeiro do Rio Grande do Sul)

A enorme complexidade dos sistemas ecológicos tem sido uma grande barreira para a compreensão e o gerenciamento da problemática ambiental. Neste sentido a modelagem matemática é uma valiosa ferramenta, devido a sua capacidade de organizar as informações disponíveis sobre estes sistemas e de fazer previsões a seu respeito para diferentes condições. Desta forma a análise de sistemas naturais vem sendo abordada de diferentes maneiras, sendo que nas últimas décadas a teoria de ecossistemas expandiu-se e ramos específicos, que permitem seguir e predizer a evolução de ecossistemas, foram formulados. Um destes enfoques, conhecido como análise do fluxo de insumo-produto, pode ser utilizado para explicar o funcionamento e estrutura dos subsistemas de um ecossistema através da descrição dos fluxos de matéria ou energia. A análise do fluxo de insumo-produto pode ser representada através de dois modelos: o modelo determinístico ou o modelo estocástico, tendo sua origem em estudos de caso com o objetivo de analisar a econômica norte-americana, sendo uma extensão prática da teoria clássica de interdependência geral. Este trabalho faz uma abordagem sintética da evolução desta análise, avaliando dados teóricos e principalmente dados referentes à Lagoa Itapeva. A análise de input-output (determinística e estocástica) com o propósito de obter informações no que diz respeito aos fluxos (matéria e energia), é bastante simples; sendo que os modelos determinísticos se prestam melhor para traçar um panorama global e para obter projeções para as variáveis já os modelos estocásticos são mais complexos, mas provêem uma descrição mais acurada. Na Lagoa Itapeva os processos determinísticos demonstraram um baixo índice de ciclagem do carbono entre os três compartimentos em estudo e o fluxo preferencial na normalização corresponde ao compartimento dos produtores primários, isto decorre de não existir loop nos compartimentos em estudo e também não existir fluxos em dois sentidos. Em relação à avaliação estocástica foram observadas uma baixa relação no sentido espacial superfície-meio-fundo da lagoa, e uma boa distribuição espacial norte-centro-sul. Quanto à distribuição temporal, foi constatada uma baixa concordância entre os dados analisados e os dados reais quanto das análises realizadas em intervalos de tempo pequeno (horas) e uma boa concordância nas medidas feitas quando o intervalo foi significativo (meses). Também em relação à Lagoa Itapeva, foi verificado nas análises estocásticas, utilizando-se operadores espaciais, que como a dinâmica biológica nem sempre é linear, os organismos não podem acompanhar imediatamente e perfeitamente as mudanças do ambiente, resultando em tempos de residência de matéria significativamente baixo. Além da análise dos fluxos ligados a este ecossistema lagunar, foram desenvolvidas técnicas de correção e adaptação de dados referentes à amostragem ocorrida na Lagoa durante um ano de campanha. Assim, propõe-se uma nova perspectiva no uso desta metodologia de forma simples e de fácil manipulação matemática.