Resilience through Adversity: A narrative case study of students' experiences of expulsion from school

Expulsion from school is life changing. This single event can alter the trajectory of a student's life--for better or for worse. How life changes is unique for each individual student. Risk and protective factors that impact an individual student's resilience determine the level of positive or negative outcomes experienced as a result of expulsion. Educators have the opportunity to take advantage of this disruption in students' education to improve the trajectory of students' lives. However, without thoughtful intervention from caring educators, this interruption in students' education may have an irreparable destructive impact on students' future. The purpose of this study was to understand the expulsion experience from the point of view of the student in order to represent this critical stakeholder group in future policy and program development, implementation, and decision-making. Students' narratives are a means for members of the educational community to access students' experiences and perceptions in order to understand the impact of expulsion on students' lives. Students' perspectives are presented through thick description in this narrative case study. The experience of these eight students is evidence that expulsion can change students' lives in a positive way. Knowing this, responsible educators must develop interventions for expelled students that channel the positive life-changing potential of this experience. Educators must develop interventions focused on bringing forth protective factors that are documented to increase resilience and to make students less susceptible to the risks inherent in removing them from school. Recommendations for educators and policy-makers are presented to assist educators in preventing expulsion and improving educational and socio-emotional outcomes for expelled students.

Experiences on using Arduino for laboratory experiments of Automatic Control and Robotics

The free hardware platforms have become very important in engineering education in recent years. Among these platforms, Arduino highlights, characterized by its versatility, popularity and low price. This paper describes the implementation of four laboratory experiments for Automatic Control and Robotics courses at the University of Alicante, which have been developed based on Arduino and other existing equipment. Results were evaluated taking into account the views of students, concluding that the proposed experiments have been attractive to them, and they have acquired the knowledge about hardware configuration and programming that was intended.

Narratives and counter-narratives on "marriage of convenience" : conjugality and (il)legality in portuguese migration policies and in couples’ experiences

Tese de doutoramento, Sociologia (Sociologia da Família, Juventude e das Relações do Género), Universidade de Lisboa, Instituto de Ciências Sociais, 2016

Administrative Capacity for Effective Implementation of EU Law

Article 197 of the Treaty on the Functioning of the European Union stipulates that effective implementation of Union law by the Member States shall be regarded as a matter of common interest. This article considers how Member States may improve their administrative capacity to apply EU law effectively. A law or policy is effectively implemented when it can be confirmed that its objectives, targets or results are actually achieved. It is proposed that effective implementation in the EU is a ‘collaborative project’. This is not only because Member States benefit when others correctly implement common rules, but also because they learn from the experiences of other Member States. It follows that the public authorities responsible for implementation of EU law need to benchmark their performance against that of their peers in other Member States and therefore need to develop the institutional capacity for assessing and adjusting their own performance.

Communities of implementation

The concept of communities of practice (CoPs) has rapidly gained ground in fields such as knowledge management and organisational learning since it was first identified by Lave and Wenger (1991) and Brown and Duguid (1991). In this article, we consider a related concept that we have entitled “communities of implementation.” Communities of implementation (CoIs) are similar to communities of practice in that they offer an opportunity for a collection of individuals to support each other and share knowledge in a dynamic environment and on a topic in which they share interest. In addition, and to differentiate them from CoPs, a community of implementation extends the responsibilities of a CoP by having as its focus the implementation of a programme of change. This may well extend to designing the change programme. Thus, whereas a main purpose of a CoP is to satisfy “a real need to know what each other knows” (Skyrme, 1999) in an informal way, we argue that a main purpose of a community of implementation is to “pool individual knowledge (including contacts and ways of getting things done) to stimulate collective enthusiasm in order to take more informed purposeful action for which the members are responsible.” Individual and collective responsibility and accountability for successfully implementing the actions/change programme is a key feature of a community of implementation. Without these pressures the members might lower the priority of implementation, allowing competing priorities to dominate their attention and resources. Without responsibility and accountability, the result is likely to be (at best) an organisation which has not begun a change programme, or (at worst) an organisation which is stuck halfway through another failing initiative. To achieve these additional objectives beyond those of a CoP, the CoI needs to provide heightened support to its members. In fact often the members will collectively strategise the development and implementation of the change programme they are leading in the organisation. Other concepts similar to CoPs have appeared in the literature, for example “communities of knowing” (Boland & Tenkasi, 1995), but none have a specific focus on implementation. Perhaps the closest example of a CoI, as suggested by our definition, is reported by Karsten, Lyytinen, Hurskainen, and Koskelainen (2001) who describe a CoP in a paper machinery manufacturer which seems to have the necessary focus on implementation. The theoretical aspects of this article will explore the relationship between CoPs and CoIs, and the needs for different arrangements for a CoI. The practical aspect of this article will consist of a report on a case study of a CoI that was successful in its implementation of a programme of change that aimed to improve its organisation’s knowledge management activities. Over two years the CoI implemented a suite of complementary actions across the organisation. These actions transformed the organisation and moved it towards achieving its ‘core values’ and overall objectives. The article will explore: the activities that formed and gelled the community, the role of the community in the implementation of actions, and experiences from key members of this community on its success and potential improvements.

Managing wireless networks in the healthcare sector:emerging experiences of cultural impacts

The existing body of knowledge has generally supported that organizational culture plays a significant role in shaping group identity, work pattern, communication schemes, and interpersonal relations; all of these cultural elements are important organizational factors that shape workplaces and operational routines. In the context of emerging information technology, it has also been suggested that organizational culture could affect IT implementation and management. However, little is known about how emerging information technology shapes organizational culture, which in turn helps reshape the organization as a whole. The purpose of this paper is thus to build empirical understanding of how IT in general and emerging wireless networks in particular reshapes organizational culture. Case studies conducted in two hospitals situated in southwest U.S.A. illustrated that the implementation of wireless networks indeed helped shape and/or reshape organizational culture in the healthcare sector and in turn enhance healthcare organizations’ competitiveness in the marketplace. For IT managers and practitioners in healthcare institutions, effective strategy to plan and manage emerging ITs such as wireless networks will thus have long-term implications on cultivating organizational culture that could eventually reshape workplace and competitiveness.

Universities Masters World Cup Soccer:integrated sports science research and implementation of an international masters soccer community

Ageing populations with greater wellness and athletic expectations require quality sports and active living experiences in order to increase and sustain participation levels. Responding to the diverse needs and circumstances of Masterslveterans players is a complex and multi-faceted process. While sports science contributions have been very effective at enhancing active living in a variety of youth and adult sports events, very little has been documented regarding their efficacy in events for Masterslveteran players. This paper draws upon action research to examine the growth and development of a unique Masters World Cup 6-0-side Soccer Tournament, involving representative teams from twelve nations. lntegrated sports science concepts and strategies were employed to develop quality soccer experiences. Longitudinal data suggest that fostering a community of practice is critical to the success of Masters soccer programs. In addition to critical leadership contributions, an eclectic range of age-appropriate and responsive soccer experiences are essential to ensure that Masters events meet the diverse needs and circumstances of the players.

Practically oriented design projects in mechatronics engineering:a case study of design experiences and outcomes

This paper discusses and presents a case study of a practically oriented design project together with a few examples of implemented design projects recently incorporated into an undergraduate system course at the mechatronics engineering department in Ah-Balqa’ Applied University. These projects have had a positive impact on both the department and its graduates. The focus of these projects is the design and implementation of processor-based system. This helps graduate students cross the border between hardware design and software design. Our case study discusses the research methodology adopted for the physical development of the project, the technology used in the project, and the design experiences and outcomes.

Patients’ perceptions and experiences of cardiovascular disease and diabetes prevention programmes:a systematic review and framework synthesis using the Theoretical Domains Framework

Background - This review provides a worked example of ‘best fit’ framework synthesis using the Theoretical Domains Framework (TDF) of health psychology theories as an a priori framework in the synthesis of qualitative evidence. Framework synthesis works best with ‘policy urgent’ questions. Objective - The review question selected was: what are patients’ experiences of prevention programmes for cardiovascular disease (CVD) and diabetes? The significance of these conditions is clear: CVD claims more deaths worldwide than any other; diabetes is a risk factor for CVD and leading cause of death. Method - A systematic review and framework synthesis were conducted. This novel method for synthesizing qualitative evidence aims to make health psychology theory accessible to implementation science and advance the application of qualitative research findings in evidence-based healthcare. Results - Findings from 14 original studies were coded deductively into the TDF and subsequently an inductive thematic analysis was conducted. Synthesized findings produced six themes relating to: knowledge, beliefs, cues to (in)action, social influences, role and identity, and context. A conceptual model was generated illustrating combinations of factors that produce cues to (in)action. This model demonstrated interrelationships between individual (beliefs and knowledge) and societal (social influences, role and identity, context) factors. Conclusion - Several intervention points were highlighted where factors could be manipulated to produce favourable cues to action. However, a lack of transparency of behavioural components of published interventions needs to be corrected and further evaluations of acceptability in relation to patient experience are required. Further work is needed to test the comprehensiveness of the TDF as an a priori framework for ‘policy urgent’ questions using ‘best fit’ framework synthesis.

Lecturers' experiences of assessing generic skills in an active learning environment for engineering education in Malaysia - Emergent findings

The aim of this paper is to explore the engineering lecturers' experiences of generic skills assessment within an active learning context in Malaysia. Using a case-study methodology, lecturers' assessment approaches were investigated regarding three generic skills; verbal communication, problem solving and team work. Because of the importance to learning of the assessment of such skills it is this assessment that is discussed. The findings show the lecturers' initial feedback to have been generally lacking in substance, since they have limited knowledge and experience of assessing generic skills. Typical barriers identified during the study included; generic skills not being well defined, inadequate alignment across the engineering curricula and teaching approaches, assessment practices that were too flexible, particular those to do with implementation; and a failure to keep up to date with industrial requirements. The emerging findings of the interviews reinforce the arguments that there is clearly much room for improvement in the present state of generic skills assessment.

GPs' perspectives on managing the NHS Health Check in primary care:a qualitative evaluation of implementation in one area of England

OBJECTIVES: To evaluate the implementation of the National Health Service (NHS) Health Check programme in one area of England from the perspective of general practitioners (GPs). DESIGN: A qualitative exploratory study was conducted with GPs and other healthcare professionals involved in delivering the NHS Health Check and with patients. This paper reports the experience of GPs and focuses on the management of the Heath Check programme in primary care. SETTING: Primary care surgeries in the Heart of Birmingham region (now under the auspices of the Birmingham Cross City Clinical Commissioning Group) were invited to take part in the larger scale evaluation. This study focuses on a subset of those surgeries whose GPs were willing to participate. PARTICIPANTS: 9 GPs from different practices volunteered. GPs served an ethnically diverse region with areas of socioeconomic deprivation. Ethnicities of participant GPs included South Asian, South Asian British, white, black British and Chinese. METHODS: Individual semistructured interviews were conducted with GPs face to face or via telephone. Thematic analysis was used to analyse verbatim transcripts. RESULTS: Themes were generated which represent GPs' experiences of managing the NHS Health Check: primary care as a commercial enterprise; 'buy in' to concordance in preventive healthcare; following protocol and support provision. These themes represent the key issues raised by GPs. They reveal variability in the implementation of NHS Health Checks. GPs also need support in allocating resources to the Health Check including training on how to conduct checks in a concordant (or collaborative) way. CONCLUSIONS: The variability observed in this small-scale evaluation corroborates existing findings suggesting a need for more standardisation. Further large-scale research is needed to determine how that could be achieved. Work needs to be done to further develop a concordant approach to lifestyle advice which involves tailored individual goal setting rather than a paternalistic advice-giving model.

Implementation of service -learning in higher education courses: Perceptions of faculty

This study examined the motivation of college and university faculty to implement service-learning into their traditional courses. The benefits derived by faculty, as well as those issues of maintenance, including supports and/or obstacles, were also investigated in relation to their impact on motivation. The focus was on generating theory from the emerging data. ^ Data were collected from interviews with 17 faculty teaching courses that included a component of service-learning. A maximum variation sampling of participants from six South Florida colleges and universities was utilized. Faculty participants represented a wide range of academic disciplines, faculty ranks, years of experience in teaching and using service-learning as well as gender and ethnic diversity. For data triangulation, a focus group with eight additional college faculty was conducted and documents, including course syllabi and institutional service-learning handbooks, collected during the interviews were examined. The interviews were transcribed and coded using traditional methods as well as with the assistance of the computerized assisted qualitative data analysis software, Atlas.ti. The data were organized into five major categories with themes and sub-themes emerging for each. ^ While intrinsic or personal factors along with extrinsic factors all serve to influence faculty motivation, the study's findings revealed that the primary factors influencing faculty motivation to adopt service-learning were those that were intrinsic or personal in nature. These factors included: (a) past experiences, (b) personal characteristics including the value of serving, (c) involvement with community service, (d) interactions and relationships with peers, (e) benefits to students, (f) benefits to teaching, and (g) perceived career benefits. Implications and recommendations from the study encompass suggestions for administrators in higher education institutions for supporting and encouraging faculty adoption of service-learning including a well developed infrastructure as well as incentives, particularly during the initial implementation period, rewards providing recognition for the academic nature of service-learning and support for the development of peer relationships among service-learning faculty. ^

Putting Adequate Financial and Human Resources in Healthcare for Effective Universal Health Coverage in Kenya: Lessons and Experiences from China

In recent years, most low and middle-income countries, have adopted different approaches to universal health coverage (UHC), to ensure equity and financial risk protection in accessing essential healthcare services. UHC-related policies and delivery strategies are largely based on existing healthcare systems, a result of gradual development (based on local factors and priorities). Most countries have emphasized on health financing, and human resources for health (HRH) reform policies, based on good practices of several healthcare plans to deliver UHC for their population.

Health financing and labor market frameworks were used, to understand health financing, HRH dynamics, and to analyze key health policies implemented over the past decade in Kenya’s effort to achieve UHC. Through the understanding, policy options are proposed to Kenya; analyzing, and generating lessons from health financing, and HRH reforms experiences in China. Data was collected using mixed methods approach, utilizing both quantitative (documents and literature review), and qualitative (in-depth interviews) data collection techniques.

The problems in Kenya are substantial: high levels of out-of-pocket health expenditure, slow progress in expanding health insurance among informal sector workers, inefficiencies in pulling of health are revenues, inadequate deployed HRH, maldistribution of HRH, and inadequate quality measures in training health worker. The government has identified the critical role of strengthening primary health care and the National Hospital Insurance Fund (NHIF) in Kenya’s move towards UHC. Strengthening primary health care requires; re-defining the role of hospitals, and health insurance schemes, and training, deploying and retaining primary care professionals according to the health needs of the population; concepts not emphasized in Kenya’s healthcare reforms or programs design. Kenya’s top leadership commitment is urgently needed for tougher reforms implementation, and important lessons from China’s extensive health reforms in the past decade are beneficial. Key lessons from China include health insurance expansion through rigorous research, monitoring, and evaluation, substantially increasing government health expenditure, innovative primary healthcare strengthening, designing, and implementing health policy reforms that are responsive to the population, and regional approaches to strengthening HRH.

PHYSICAL ACTIVITY EXPERIENCES OF PERSIAN WOMEN RECENTLY IMMIGRATED TO CANADA

New immigrants to Canada are generally in similar or better physical and mental health than people born in Canada, however, many studies suggest that their health tends to decline quickly after immigration. Lower physical activity levels among new immigrants might be contributing to this phenomenon. There is a paucity of information regarding the physical activity behaviour of the Canadian immigrant population in general and of West Asian women, such as Iranians (Persians), in particular. Given that this group is characterised by an increasing population growth and lower rates of physical activity, it is critical to understand how best to address physical activity promotion in this population. Purpose: To understand the physical activity experiences of Persian women recently immigrated to Toronto, Canada in order to develop recommendations for the design and implementation of tailored physical activity programs. Methods: A qualitative interpretive description approach was chosen to collect and describe ideas, experiences, and perceptions of physical activity within 10 new immigrant women. Using an inductive approach, two fundamental techniques of immersion and crystallization were used throughout the analysis. Thematic analysis was conducted by performing a sequential process of open and axial coding. Emerged themes were further conceptualized through a socio-ecological lens. Results: The facilitators and barriers to physical activity among the women were situated within five overarching categories, 1) Perceptions about physical activity, 2) New physical environment and social structure, 3) Cultural heritage values, 4) Settlement and immigration factors, and 5) Physical activity program features. Discussion: Findings revealed that Persian new immigrant women’s engagement in physical activity after immigration is influenced by factors across the individual, sociocultural, environmental, institutional, and policy levels. Newcomer women’s physical activity was influenced by their transition from their society of origin to the host society and the challenges and successes experienced throughout the settlement and acculturation process. The most noticeable barrier to physical activity in Canada for the women emerged as the lack of communication of physical activity information to newcomers. A set of recommendations is provided for developing efficient physical activity programs for Persian immigrant women, which may also be relevant for other immigrant groups in Canada.

Creating New Design-Build-Test Experiences as Outputs of Undergraduate Design-Build-Test Projects

This paper describes a methodology of using individual engineering undergraduate student projects as a means of effectively and efficiently developing new Design-Build-Test (DBT) learning experiences and challenges.
A key aspect of the rationale for this approach is that it benefits all parties. The student undertaking the individual project gets an authentic experience of producing a functional artefact, which has been the result of a design process that addresses conception, design, implementation and operation. The supervising faculty member benefits from live prototyping of new curriculum content and resources with a student who is at a similar level of knowledge and experience as the intended end users of the DBT outputs. The multiple students who ultimately undertake the DBT experiences / challenges benefit from the enhanced nature of a learning experience which has been “road tested” and optimised.
To demonstrate the methodology the paper will describe a case study example of an individual project completed in 2015. This resulted in a DBT design challenge with a theme of designing a catapult for throwing table tennis balls, the device being made from components laser cut from medium density fibreboard (MDF). Further three different modes of operation will be described which use the same resource materials but operate over different timescales and with different learning outcomes, from an icebreaker exercise focused on developing team dynamics through to full DBT where students get an opportunity to experience the full impact of their design decisions by competing against other students with a catapult they have designed and built themselves.