Métodos estatísticos recursivos aplicados ao problema de estimação de vazão de gás em plantas de Plunger-lift

This work has as main objective to find mathematical models based on linear parametric estimation techniques applied to the problem of calculating the grow of gas in oil wells. In particular we focus on achieving grow models applied to the case of wells that produce by plunger-lift technique on oil rigs, in which case, there are high peaks in the grow values that hinder their direct measurement by instruments. For this, we have developed estimators based on recursive least squares and make an analysis of statistical measures such as autocorrelation, cross-correlation, variogram and the cumulative periodogram, which are calculated recursively as data are obtained in real time from the plant in operation; the values obtained for these measures tell us how accurate the used model is and how it can be changed to better fit the measured values. The models have been tested in a pilot plant which emulates the process gas production in oil wells

Degradabilidade do capim-elefante em diferentes estágios de maturidade avaliada pelo método in vitro/gás

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação do sistema de monitoramento computadorizado de digestão in vitro: 1. Testes preliminares

O objetivo deste trabalho foi testar o sistema de monitoramento computadorizado da produção de gás in vitro. Essa técnica facilita estudos da degradação das frações solúveis e insolúveis das forragens, quantificadas pela produção de gás (CO2 e CH4) oriunda do metabolismo microbiano e medida por sensor de pressão. Diversas quantidades de amostras (50 a 110 mg de feno de alfafa) e outros alimentos foram testadas. Também, a influência da quantidade de líquido ruminal (2,0 ou 3,0 mL), com ou sem barras magnéticas agitadoras nos frascos incubatórios, na digestibilidade de 100 mg de feno de alfafa, foi estudada. A quantidade de 100 mg de amostra, 2,0 mL de líquido ruminal e sem barra magnética agitadora, proporcionou os menores coeficientes de variação na produção de gás. em conclusão, 2,0 mL de líquido ruminal, sem barra e com 100 mg de amostra, apresentaram maior precisão na curva de digestão.

Sugarcane silage production treated with additives at different times post burning

Objetivou-se estudar a ação do tempo após a queima do canavial e o uso de aditivos sobre as características fermentativas, as perdas e a composição química de silagens de cana-de-açúcar. A cultivar utilizada foi a IAC 86-2480 colhida em cinco tempos (1, 4, 7, 10 e 14 dias) pós-queima. Os aditivos utilizados foram controle, sem aditivos, Lactobacillus buchneri, cal virgem micropulverizada e Lactobacillus buchneri + cal virgem micropulverizada. Antes da ensilagem em cada tempo, foram determinadas as populações de leveduras presentes na cana-de-açúcar. Decorridos 56 dias após a ensilagem, os silos experimentais foram abertos. O delineamento experimental utilizado foi o inteiramente casualizado em esquema fatorial, considerando os fatores aditivos e tempo pós-queima. Houve recontaminação da cana-de-açúcar pelas leveduras, elevando a população de 5,04 para 6,48 log ufc/g de forragem. Os teores de matéria seca (MS) após a abertura do silo reduziram em média 7,6 unidades percentuais em comparação aos observados na ensilagem. As silagens controle e com Lactobacillus buchneri tiveram menores recuperações da matéria seca (613 e 631 g/kg, respectivamente), em comparação às observadas nas silagens com cal e com a combinação Lactobacillus buchneri + cal (807 g/kg e 832 g/kg, respectivamente), fato que pode ser justificado pelo controle de levedura pela cal. Após a queima, as maiores variações foram na produção de gás e na recuperação de matéria seca: a produção de gás foi maior nos primeiros dias e diminuiu com o tempo após a queima, consequentemente, a recuperação de MS foi menor nos primeiros dias e aumentou com o tempo após a queima. O tempo após a queima altera o valor nutritivo da cana-de-açúcar fresca e das suas silagens, assim como a magnitude das perdas no processo de ensilagem.

Produção e valor nutricional de híbridos de amoreira (Morus alba L.) colhidos em diferentes idades de crescimento

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação da Hidrólise Ácida e Alcalina do Caroço de Abacate para a Produção de Etanol

New patterns from replaceable sources have been searched by scientific community to ethanol produce. The seed of avocado has thereabout 20% of starch. The starch hydrolysis results fermentable sugars by Saccharomyces cerevisiae, and the ethanol is the major product of fermentation. The starch can be hydrolysed by acids, basis and enzymes. Previous studies showed that enzymatic hydrolysis can produce 26,01 liter of ethanol per ton of seed. At the present work, we analyzed the chemistry hydrolysis efficiency before the enzymatic hydrolysis and the use of dormant seed consequence. The Brix rate variation at each stage was evaluated and the ethanol concentration was determined with gas chromatograph technique. The chemistry hydrolysis with subsequent enzymatic hydrolysis was effective, producing until 61,8 L.ton-1. The use of dormant seeds wasn’t significative to raise the Brix rate. The seed of avocado demonstrated to be an alternative replaceable source to ethanol produce

Glycerol combined with oils did not limit biohydrogenation of unsaturated fatty acid but reduced methane production in vitro

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Bioremediation of PAHs - Limitations and soultions

Introduction 1.1 Occurrence of polycyclic aromatic hydrocarbons (PAH) in the environment Worldwide industrial and agricultural developments have released a large number of natural and synthetic hazardous compounds into the environment due to careless waste disposal, illegal waste dumping and accidental spills. As a result, there are numerous sites in the world that require cleanup of soils and groundwater. Polycyclic aromatic hydrocarbons (PAHs) are one of the major groups of these contaminants (Da Silva et al., 2003). PAHs constitute a diverse class of organic compounds consisting of two or more aromatic rings with various structural configurations (Prabhu and Phale, 2003). Being a derivative of benzene, PAHs are thermodynamically stable. In addition, these chemicals tend to adhere to particle surfaces, such as soils, because of their low water solubility and strong hydrophobicity, and this results in greater persistence under natural conditions. This persistence coupled with their potential carcinogenicity makes PAHs problematic environmental contaminants (Cerniglia, 1992; Sutherland, 1992). PAHs are widely found in high concentrations at many industrial sites, particularly those associated with petroleum, gas production and wood preserving industries (Wilson and Jones, 1993). 1.2 Remediation technologies Conventional techniques used for the remediation of soil polluted with organic contaminants include excavation of the contaminated soil and disposal to a landfill or capping - containment - of the contaminated areas of a site. These methods have some drawbacks. The first method simply moves the contamination elsewhere and may create significant risks in the excavation, handling and transport of hazardous material. Additionally, it is very difficult and increasingly expensive to find new landfill sites for the final disposal of the material. The cap and containment method is only an interim solution since the contamination remains on site, requiring monitoring and maintenance of the isolation barriers long into the future, with all the associated costs and potential liability. A better approach than these traditional methods is to completely destroy the pollutants, if possible, or transform them into harmless substances. Some technologies that have been used are high-temperature incineration and various types of chemical decomposition (for example, base-catalyzed dechlorination, UV oxidation). However, these methods have significant disadvantages, principally their technological complexity, high cost , and the lack of public acceptance. Bioremediation, on the contrast, is a promising option for the complete removal and destruction of contaminants. 1.3 Bioremediation of PAH contaminated soil & groundwater Bioremediation is the use of living organisms, primarily microorganisms, to degrade or detoxify hazardous wastes into harmless substances such as carbon dioxide, water and cell biomass Most PAHs are biodegradable unter natural conditions (Da Silva et al., 2003; Meysami and Baheri, 2003) and bioremediation for cleanup of PAH wastes has been extensively studied at both laboratory and commercial levels- It has been implemented at a number of contaminated sites, including the cleanup of the Exxon Valdez oil spill in Prince William Sound, Alaska in 1989, the Mega Borg spill off the Texas coast in 1990 and the Burgan Oil Field, Kuwait in 1994 (Purwaningsih, 2002). Different strategies for PAH bioremediation, such as in situ , ex situ or on site bioremediation were developed in recent years. In situ bioremediation is a technique that is applied to soil and groundwater at the site without removing the contaminated soil or groundwater, based on the provision of optimum conditions for microbiological contaminant breakdown.. Ex situ bioremediation of PAHs, on the other hand, is a technique applied to soil and groundwater which has been removed from the site via excavation (soil) or pumping (water). Hazardous contaminants are converted in controlled bioreactors into harmless compounds in an efficient manner. 1.4 Bioavailability of PAH in the subsurface Frequently, PAH contamination in the environment is occurs as contaminants that are sorbed onto soilparticles rather than in phase (NAPL, non aqueous phase liquids). It is known that the biodegradation rate of most PAHs sorbed onto soil is far lower than rates measured in solution cultures of microorganisms with pure solid pollutants (Alexander and Scow, 1989; Hamaker, 1972). It is generally believed that only that fraction of PAHs dissolved in the solution can be metabolized by microorganisms in soil. The amount of contaminant that can be readily taken up and degraded by microorganisms is defined as bioavailability (Bosma et al., 1997; Maier, 2000). Two phenomena have been suggested to cause the low bioavailability of PAHs in soil (Danielsson, 2000). The first one is strong adsorption of the contaminants to the soil constituents which then leads to very slow release rates of contaminants to the aqueous phase. Sorption is often well correlated with soil organic matter content (Means, 1980) and significantly reduces biodegradation (Manilal and Alexander, 1991). The second phenomenon is slow mass transfer of pollutants, such as pore diffusion in the soil aggregates or diffusion in the organic matter in the soil. The complex set of these physical, chemical and biological processes is schematically illustrated in Figure 1. As shown in Figure 1, biodegradation processes are taking place in the soil solution while diffusion processes occur in the narrow pores in and between soil aggregates (Danielsson, 2000). Seemingly contradictory studies can be found in the literature that indicate the rate and final extent of metabolism may be either lower or higher for sorbed PAHs by soil than those for pure PAHs (Van Loosdrecht et al., 1990). These contrasting results demonstrate that the bioavailability of organic contaminants sorbed onto soil is far from being well understood. Besides bioavailability, there are several other factors influencing the rate and extent of biodegradation of PAHs in soil including microbial population characteristics, physical and chemical properties of PAHs and environmental factors (temperature, moisture, pH, degree of contamination). Figure 1: Schematic diagram showing possible rate-limiting processes during bioremediation of hydrophobic organic contaminants in a contaminated soil-water system (not to scale) (Danielsson, 2000). 1.5 Increasing the bioavailability of PAH in soil Attempts to improve the biodegradation of PAHs in soil by increasing their bioavailability include the use of surfactants , solvents or solubility enhancers.. However, introduction of synthetic surfactant may result in the addition of one more pollutant. (Wang and Brusseau, 1993).A study conducted by Mulder et al. showed that the introduction of hydropropyl-ß-cyclodextrin (HPCD), a well-known PAH solubility enhancer, significantly increased the solubilization of PAHs although it did not improve the biodegradation rate of PAHs (Mulder et al., 1998), indicating that further research is required in order to develop a feasible and efficient remediation method. Enhancing the extent of PAHs mass transfer from the soil phase to the liquid might prove an efficient and environmentally low-risk alternative way of addressing the problem of slow PAH biodegradation in soil.

Financial decision making about found oil and gas in Ghana : real options vs. traditional methods

This research is a study of the use of capital budgeting methods for investment decisions. It uses both the traditional methods and the newly introduced approach called the real options analysis to make a decision. The research elucidates how capital budgeting can be done when analysts encounter projects with high uncertainty and are capital intensive, for example oil and gas production. It then uses the oil and gas find in Ghana as a case study to support its argument. For a clear understanding a thorough literature review was done, which highlights the advantages and disadvantages of both methods. The revenue that the project will generate and the costs of production were obtained from the predictions by analysts from GNPC and compared to others experts’ opinion. It then applied both the traditional and real option valuation on the oil and gas find in Ghana to determine the project’s feasibility. Although, there are some short falls in real option analysis that are presented in this research, it is still helpful in valuing projects that are capital intensive with high volatility due to the strategic flexibility management possess in their decision making. It also suggests that traditional methods of evaluation should still be maintained and be used to value projects that have no options or those with options yet the options do not have significant impact on the project. The research points out the economic ripples the production of oil and gas will have on Ghana’s economy should the project be undertaken. These ripples include economic growth, massive job creation and reduction of the balance of trade deficit for the country. The long run effect is an eventually improvement of life of the citizens. It is also belief that the production of gas specifically can be used to generate electricity in Ghana which would enable the country to have a more stable and reliable power source necessary to attract more foreign direct investment.

Modeling the heterogeneous ice and gas coma of Comet 103P/Hartley 2

The spectacular images of Comet 103P/Hartley 2 recorded by the Medium Resolution Instrument (MRI) and High Resolution Instrument (HRI) on board of the Extrasolar Planet Observation and Deep Impact Extended Investigation (EPOXI) spacecraft, as the Deep Impact extended mission, revealed that its bi-lobed very active nucleus outgasses volatiles heterogeneously. Indeed, CO2 is the primary driver of activity by dragging out chunks of pure ice out of the nucleus from the sub-solar lobe that appear to be the main source of water in Hartley 2's coma by sublimating slowly as they go away from the nucleus. However, water vapor is released by direct sublimation of the nucleus at the waist without any significant amount of either CO2 or icy grains. The coma structure for a comet with such areas of diverse chemistry differs from the usual models where gases are produced in a homogeneous way from the surface. We use the fully kinetic Direct Simulation Monte Carlo model of Tenishev et al. (Tenishev, V.M., Combi, M.R., Davidsson, B. [2008]. Astrophys. J. 685, 659-677; Tenishev, V.M., Combi, M.R., Rubin, M. [2011]. Astrophys. J. 732, 104-120) applied to Comet 103P/Hartley 2 including sublimating icy grains to reproduce the observations made by EPOXI and ground-based measurements. A realistic bi-lobed nucleus with a succession of active areas with different chemistry was included in the model enabling us to study in details the coma of Hartley 2. The different gas production rates from each area were found by fitting the spectra computed using a line-by-line non-LTE radiative transfer model to the HRI observations. The presence of icy grains with long lifetimes, which are pushed anti-sunward by radiation pressure, explains the observed OH asymmetry with enhancement on the night side of the coma.

Mass transport around comets and its impact on the seasonal differences in water production rates

Comets are surrounded by a thin expanding atmosphere, and although the nucleus' gravity is small, some molecules and grains, possibly with the inclusion of ices, can get transported around the nucleus through scattering (atoms/molecules) and gravitational pull (grains). Based on the obliquity of the comet, it is also possible that volatile material and icy grains get trapped in regions, which are in shadow until the comet passes its equinox. When the Sun rises above the horizon and the surface starts to heat up, this condensed material starts to desorb and icy grains will sublimate off the surface, possibly increasing the comet's neutral gas production rate on the outbound path. In this paper we investigate the mass transport around the nucleus, and based on a simplified model, we derive the possible contribution to the asymmetry in the seasonal gas production rate that could arise from trapped material released from cold areas once they come into sunlight. We conclude that the total amount of volatiles retained by this effect can only contribute up to a few percent of the asymmetry observed in some comets.

Polymer-solvent interaction parameters of SBS rubbers by inverse gas chromatography measurements

The solubility parameters of two SBS commercial rubbers with different structures (lineal and radial), and with slightly different styrene content have been determined by inverse gas chromatography technique. The Flory–Huggins interaction parameters of several polymer–solvent mixtures have also been calculated. The influence of the polymer composition, the solvent molecular weight and the temperature over these parameters have been discussed; besides, these parameters have been compared with previous ones, obtained by intrinsic viscosity measurements. From the Flory–Huggins interaction parameters, the infinite dilution activity coefficients of the solvents have been calculated and fitted to the well-known NRTL model. These NRTL binary interaction parameters have a great importance in modelling the separation steps in the process of obtaining the rubber.

Optimización del coste de aprovisionamiento de gas en el mercado mayorista español para una comercializadora

Los precios de compra de gas natural en el mercado mayorista español son los más altos de toda Europa. Este escenario provoca que haya que buscar alternativas para minimizar los costes de aprovisionamiento para una comercializadora de gas. En este proyecto se analizan distintas oportunidades de compra de gas en los mercados europeos y su importación al sistema gasista español para el suministro final a clientes, con el fin de optimizar los costes del gas natural para una comercializadora. En la búsqueda de nuevas oportunidades se incluye también un análisis del impacto económico en el mercado, de la producción de “shale gas” en España a medio - largo plazo. ABSTRACT The gas prices in the Spanish gas market are the highest in Europe. This scenario leads the Spanish gas trading companies to look for alternatives to minimize gas supply costs. In this project it is analyzed different opportunities of gas supply in the European markets and the gas import to the Spanish gas system, in order to optimize the costs of the natural gas for a gas trading company. Along with this, it is also studied, the economic impact of the “shale gas” production in Spain in a medium - long term on the Spanish gas market

Proyecto de evaluación de un yacimiento de gas mediante fracturación hidráulica

En este proyecto se evalúa la posibilidad de mejorar la producción de gas en un yacimiento en el que las reservas son todavía suficientes para ser explotadas. Para realizar esta evaluación se estudia en primer lugar la cantidad de gas que se extrae sin ningún método de mejoramiento de producción, y después se evalúa la cantidad de gas que se extraería si se aplicase el método de estimulación de yacimientos llamado fracturación hidráulica mediante unos ensayos de calibración que se han realizado en uno de los pozos que hay en el yacimiento de gas. Finalmente se hace una comparación económica de cómo mejoraría la producción de gas cuando el yacimiento no está estimulado y cuando lo está. Además, se aprovecha también para hacer una sucinta revisión de la base teórica de la fracturación hidráulica y de la ingeniería de yacimientos, así como un breve estudio de impacto ambiental de la fracturación. ABSTRACT This project is trying to assess the possibility to improve the gas production of a reservoir in which there are still enough reserves to be exploited. To do that, it is necessary to evaluate the quantity of gas that is producing without any type of stimulation method and then assess how the production will grow if a stimulation method called hydraulic fracturing is applied though some calibration tests, subsequently compare how much the incomes will be increased in case of application of the stimulation method. In addition, some of the basis and concepts of reservoir stimulation and reservoir engineering are reviewed in order to understand the project. Finally, a brief environmental impact is also assessed.

Estudio de la cinetica de producción de gas de la pulpa de remolacha con inóculos ileales y cecales de conejos: comparación de modelos

Sugar beet pulp was digested in vitro using protease and pancreatin and the final residue (with no filtering) was fermented in vitro using three different ileal and caecal inocula (each one combining the digesta of three 70 d ols rabbits), respectively. In vitro gas production was measured and modeled using single and dual pool models (logistic and Groot model).