Effect of the microwave oven on structural, morphological and electrical properties of SrBi4Ti4O15 thin films grown on Pt/Ti/SiO2/Si substrates by a soft chemical method

Thin films of SrBi4Ti4O15 (SBTi), a prototype of the Bi-layered-ferroelectric oxide family, were obtained by a soft chemical method and crystallized in a domestic microwave oven. For comparison, films were also crystallized in a conventional method at 700 degrees C for 2 h. Structural and morphological characterization of the SBTi thin films were investigated by Xray diffraction (XRD) and atomic force microscopy (AFM), respectively. Using platinum coated silicon substrates, the ferroelectric properties of the films were determined. Remanent polarization P-r and a coercive field E-c values of 5.1 mu C/cm(2) and 135 kV/cm for the film thermally treated in the microwave oven and 5.4 mu C/cm(2) and 85 kv/cm for the film thermally treated in conventional furnace were found. The films thermally treated in the conventional furnace exhibited excellent fatigue-free characteristics up to 10(10) switching cycles indicating that SBTi thin films are a promising material for use in non-volatile memories. (C) 2007 Elsevier B.V. All rights reserved.

Morphological aspects of cluster formation in the germarium of the sugarcane borer Diatraea saccharalis Fabricius (Lepidoptera : Pyralidae)

Diatraea saccharalis F. is one of the greatest pests of the sugar cane culture. This report aimed to characterize the germanium region of the sugarcane borer by light and transmission electron microscopy, emphasizing the morphological steps of the ovarian cluster formation. In the germanium of this insect, four zones could be morphologically identified during the cluster formation. In the most apical end of each ovariole - Zone I - the germ line stem cells undergo complete mitotic division, originating the cystoblasts. In the Zone II, each cystoblast produces a group of eight cells, the cystocytes, which are interconnected by the ring canals. Clusters containing all the cystocytes in the meiosis, characterizes the Zone III. Germ cells with ultrastructural features of apoptosis are also detected in this Zone. In the Zone IV the cystocytes differentiate, morphologically, into one oocyte and seven nurse cells. Interstitial somatic cells and pre-follicle cells exhibit, in their cytoplasm, heterogeneous vacuoles containing degenerated cellular fragments, characterized as apoptotic bodies. Our results pointed out to the morphological evidences related with important control mechanisms for new clusters/follicles production and for the cellular arrangement into the germanium, resulting from the programmed cell death. We believe that the morphological characterization of ovarian cluster formation in D. saccharalis provided valuable information for the understanding of the initial steps of oogenesis and contributed for the knowledge of the cellular mechanisms related with the oocyte production and with reproduction in insects.

Influence of different solvents on the structural, optical and morphological properties of CdS nanoparticles

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Morfologia de frutos e sementes e morfofunção de plântulas de Moringa (Moringa oleifera Lam.)

The objective of this work was to characterize external and internal morphologic aspects of the fruit, seed, and plant of Moringa oleifera Lam. The fruits were collected in the forest garden of Falculty of Agrarian and Veterinarian Sciences, São Paulo State University, Jaboticabal-SP, Brazil. It was observed that the Moringa fruits are brown simple darkness, dry of the type capsule, tends on average: 28.50 cm of length, 2.21 cm of width, 9.91 g of mass and with 12 seeds by fruit, it considerated fruits of medium and small size. The seeds are brown dark and they present three lines clear chestnut tree. The embryo is oleaginous, has a pair of cotyledons and the germination is hypogeal-cryptocotyledonary. The seed has1.037 cm of length and 1.0 cm of thickness of average and have a considerate medium and light weight (197g/1000 seeds). The germination began eight days after the planting and in the 25th day they left the primary leaves.

Caracterização morfométrica de sementes e plântulas e germinação de anadenanthera macrocarpa (benth.) brenan

Anadenanthera macrocarpa (Benth.) Brenan is a tree species belonging to the family Leguminosae-Mimosoideae which is popularly known as mimosa-black. It features characteristics of early successional, natural occurrence in Brazil and can form clusters almost homogeneous, with great potential in the recovery of degraded areas. This study was conducted at the Center for Agricultural Sciences, University Federal of Alagoas state, aiming at the physical and morphological characterization of seeds, describing the various stages of post-seminal development, and to evaluate various conditions of temperature and substrate to perform the test germination. The seeds were manually extracted, then homogenized, where two samples of 50 seeds were used to determine the initial moisture. Another sample, consisting of eight repetitions of 100 seeds was used to measure the biometry and the number of seeds per fruit. The morphological characterization and the seeds were immersed in distilled water to allow the cuts to the observed structure in microscopes. In the post-seminal study, it was observed the daily processes of seedling growth in rolled paper filter and constant temperature of 30 °C. To assess the germination behavior, the constant temperatures of 15 °C, 25 °C, 30 °C, 40 °C and 20-30 °C as well as the paper and the sand substrates were tested and it was evaluated the percentage, the rate of germination, the relative frequency distribution, and the tests conducted in a randomized design in factorial 5 x 2 (x substrate temperature) with four replicates of 25 seeds, and the averages compared by Duncan 5 % probability. The fruits of black angico show great variation in the seed number per fruit. The embryonic axis occupies part of the central region of the seed with axial and linear positions. The germination is epigeal and the seedlings are fanerocotylar. The temperature determines the 30 °C and the filter paper substrate provided higher average percentage and germination rate.

Descrição morfológica e análise da variabilidade genética para caracteres de frutos, sementes e processo germinativo associado à produtividade de óleo em matrizes de Carapa guianensis Aublet., uma meliaceae da Amazônia

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Identificação de colletotrichum gloeosporioides de atemóia (Annona cherimola x Annona squamosa), por meio de caracterização patogênica, cultural e morfológica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização morfocultural e molecular de isolados de Colletotrichum spp. provenientes de diferentes frutas tropicais

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Caracterização morfológica e divergência genética em acessos de meloeiro

Pós-graduação em Agronomia (Genética e Melhoramento de Plantas) - FCAV

Hydro-physical characterization of soils under tropical semi-deciduous forest

The study of the hydro-physical behavior in soils using toposequences is of great importance for better understanding the soil, water and vegetation relationships. This study aims to assess the hydro-physical and morphological characterization of soil from a toposequence in Galia, state of São Paulo, Brazil). The plot covers an area of 10.24 ha (320 × 320 m), located in a semi-deciduous seasonal forest. Based on ultra-detailed soil and topographic maps of the area, a representative transect from the soil in the plot was chosen. Five profiles were opened for the morphological description of the soil horizons, and hydro-physical and micromorphological analyses were performed to characterize the soil. Arenic Haplustult, Arenic Haplustalf and Aquertic Haplustalf were the soil types observed in the plot. The superficial horizons had lower density and greater hydraulic conductivity, porosity and water retention in lower tensions than the deeper horizons. In the sub-superficial horizons, greater water retention at higher tensions and lower hydraulic conductivity were observed, due to structure type and greater clay content. The differences observed in the water retention curves between the sandy E and the clay B horizons were mainly due to the size distribution, shape and type of soil pores.

Morphological transitions in molecular and polymeric materials: patterning, fabrication, devices

This thesis individuates and characterizes irreversible transformations occurring in specific organic and oligomeric/polymeric thin films. These transformations are dewetting in discotic liquid crystals thin films and dewetting and smoothing in oligomeric and polyemeric films. Irreversible transformations are extensively characterized by means of optical and atomic force microscopy. In the case of discotic liquid crystals films the morphological characterization is performed sinchronically with electrical measurements of current during dewetting.

Taxonomía y caracterización del arbusto forrajero Atriplex halimus L.

El objetivo de esta Tesis Doctoral ha sido la revisión de la taxonomía infraespecífica de la especie Atriplex halimus L., la delimitación del área geográfica que ocupan sus taxones y su caracterización morfológica. En base a las citas bibliográficas y material de herbario consultado se ha trazado un mapa de distribución de la especie, que delimita su distribución como planta espontánea a la Cuenca Mediterránea, desierto de Siria, Macizo de Hoggar y Sahara Occidental. El resto debe considerarse poblaciones naturalizadas o cultivadas. La taxonomía actual, basada en relaciones filogenéticas, nos indica que lo adecuado es separar las poblaciones de A. halimus en dos clados que se caracterizan por tener diferente nivel de ploidía. Para definir el área de distribución de los clados diploide y tetraploide se ha determinado la ploidía de 19 poblaciones en el espacio comprendido entre las dos áreas de distribución conocidas. Y como resultado el área de distribución de ambos clados puede definirse trazando una recta que une el estrecho de Gibraltar con Estambul, las poblaciones al sur de esta línea son tetraploides a las que habría que añadir las poblaciones del este y sur de la isla de Cerdeña que son también tetraploides. Se han determinado cuales son los parámetros morfológicos que permiten caracterizar ambos clados, para lo cual se han estudiado 52 poblaciones que comprenden toda el área de distribución de la especie. Se han evaluado caracteres cualitativos y cuantitativos de valvas fructíferas, plántulas cultivadas en cámara y arbustos de 2 a 4 años situados en la misma parcela. El único elemento fiable para determinar la pertenencia al clado diploide o tetraploide es la medición del nivel de ploidía. Ninguno de los caracteres morfológicos estudiados es plenamente fiable para determinar si los individuos de una población pertenecen al clado diploide o tetraploide a pesar de realizarse las mediciones sobre poblaciones cultivadas en igualdad de condiciones de suelo y clima, y en condiciones muy favorables para la expresión de caracteres cualitativos y cuantitativos. Los caracteres cualitativos observados que guardan una mayor correlación con el nivel de ploidía son: la base de las hojas de las plántulas, el porte del arbusto, la ramificación, el ángulo de inserción de las ramas y la longitud de la inflorescencia. Respecto a los datos cuantitativos los más relevantes han sido, la longitud de los cotiledones y la longitud del limbo de la 1ª, 3ª o 5ª hoja de la plántula o la razón entre este valor y la anchura del limbo. ABSTRACT The aim of this Thesis has been in the revision of the infraspecies taxa of Atriplex halimus L., the delimitation of their natural growing area and their morphological characterization. Using references to relevant literature and consultation of herbariums, it has been possible to map the distribution of the species as spontaneous plant in the Mediterranean Basin, Desert of Syria, Massif of Hoggar and Western Sahara. The remaining populations must be considered as naturalized or cultivated. The current taxonomy, based on phylogenetic relationships, indicates that A.halimus should be divided in two clades. These clades are characterized by their different ploidy level. Samples of nineteen populations collected from localizations between the defined distribution area of both clades have been characterized for their ploidy level. As a result, it can be seen that the line of clade separation can be trazed from Istambul tothe Strait of Gibraltar, where the populations north to this line are classified as diploid and those south of the line are clsassified as tetraploid. The only exception of this rule is in Sardinia, hwre populations to the West and South of the Island are also classified as tetraploid. The morphological parameters, which include the characterization of both clades, have been defined, and the study of fifty-two populations from the entire distribution area according to these parameters have been analysed. The qualitative and quantitative characteristics of the fruit valves have been evaluated, with seedlings grown in a culture chamber, and 2-4 years old shrubs grown in the same orchard. None of the morphological characters under study are fully reliable to determine whether individuals in a population belong to clade diploid or tetraploid. This is despite measurements being made on populations grown under the same conditions of soil and climate, and in very favorable conditions for the expression of qualitative and quantitative traits. The qualitative characteristics that show a higher correlation with the ploidy level are: the base of the leaves of the seedlings, the bearing bush, the branch arrangement, the angle of insertion of the branches and the inflorescence length. With regards to the quantitative data the most relevant were the length of the cotyledons and the length of the blade of the 1st, 3rd or 5th leaves of the seedling, and the ratio of any of this values and the leaf blade width. The only reliable way to determine the diploid or tetraploid clade membership is the measurement of ploidy level.

Cytogenetic characterization of the Passiflora edulis Sims x Passiflora cincinnata Mast. interspecific hybrid and its parents.

The genus Passiflora L. consists of approximately 530 widely distributed species, including Passiflora edulis, which has drawn interest because of its commercial and agronomic value. Passiflora cincinnata is another important species owing to its long flowering period and resistance or tolerance to diseases and pests. In the present study, the meiotic segregation and pollen viability of an interspecific hybrid (P. edulis x P. cincinnata) and its parents were analyzed. The genomic contents were characterized using chromomycin A3 (CMA3)/40-60-diamidino-2-phenylindole (DAPI) staining, fluorescent in situ hybridization with 5S/45S ribosomal DNA (rDNA), genomic in situ hybridization (GISH), and inter-simple sequence repeat (ISSR) markers. The results indicated the diploid chromosome number for the parents and interspecific hybrid was 2n = 18. We also observed regular meiosis, one pair of S rDNA sites, and two pairs of 45S rDNA sites that colocalized with two pairs of CMA3 /DAPI- bands. The GISH data revealed three distinct chromosomal groups in the hybrid. The genetic origins of the interspecific hybrid, and its relationship with its parents were also confirmed using ISSR markers.

Spectroelectrochemistry and investigation of charge transport mechanisms of iron poly(pyridyl) redox polymers

In this work, we describe the characterization of the complex [Fe(tpy-NH2)(2)](PF6)(2) (tpy-NH2 = bis[4`-(3-aminophenyl)-2, 2`:6`,2 ``-terpyridine]. The complex was oxidatively electropolymerized on glassy.-carbon electrodes in CH3CN/0.1 M tetraethylammonium perchlorate (TEAP) to generate polymer films that exhibit reversible oxidative electrochemical behavior in a wide potential range (0.0-1.6 V), as well as high conductivity and stability/durability. In situ spectrocyclic voltammetry of this modified electrode was carried out on a photodiode array spectrophotometer attached to a potentiostat, which provided UV-Vis absorption spectra of the redox species during the potential sweep. We determined charge transport parameters as a function of time and thickness of the modified electrode, and the results showed that poly-[[Fe(tpy-NH2)(2)](2+)](n) can be made to exhibit three regimes of charge transport behavior by manipulation of the film thickness and the experimental time-scale. Morphological characterization of the film was provided by atomic force microscopy. (C) 2008 Elsevier Ltd. All rights reserved.