Außerirdische im amerikanischen Sciencefiction-Film

Die vorliegende Dissertation untersucht die Darstellung von außerirdischen Lebensformen im amerikanischen Sciencefiction-Film in Form eines filmhistorischen Gesamtüberblicks.Noch bevor der 1. Weltkrieg begann, waren die meisten Genremerkmale, die den Sciencefiction-Film bis heute charakterisieren, bereits erdacht. Die wenigen Sciencefiction-Filme, die Außerirdische zeigten, fügten sich jedoch sehr gut in den verspielten, märchenhaften Sciencefiction-Film der Vorkriegszeit. Bis sich das Topos des Außerirdischen als eigenes Subgenre etablieren konnte, sollten aber noch einige Jahrzehnte vergehen. Im Jahr 1950 nahm das Interesse am Weltraum schlagartig zu. Bei der Darstellung der fremden Wesen orientierte man sich zunächst an irdischen Vorbildern und es entstanden zahlreiche humanoide, tierische, pflanzliche, mineralische und amorphe außerirdische Lebensformen, die dem Menschen oft überlegen waren. In den 60ern brach der Mensch häufiger selbst in den Weltraum auf - immer öfter standen Menschen und Außerirdische nun auf gleicher Stufe. In den 70ern wurden die märchencharakteristischen Begriffe Gut und Böse durch Außerirdische verkörpert. In den 80ern gelang es dem Guten, sich durchzusetzen. Einige wunderbare Freundschaften zwischen Menschen und Außerirdischen entwickelten sich und Außerirdische wurden in die menschliche Gesellschaft integriert. Damit scheinen aber alle Spielarten des Guten gezeigt zu sein und in den 90ern ist wieder Raum für Geschichten, in denen Außerirdische das Böse verkörpern.

Trasporto di carica in film sottili di rubrene

Lo scopo della tesi risiede nel caratterizzare film sottili di Rubrene cresciuti per mezzo dell’epitassia molecolare. In particolare si è studiata la densità di stati di trappola con il fine di determinare il grado di purezza di questi campioni. Partendo dalle caratteristiche I-V (Corrente-Tensione) in temperatura è stato possibile utilizzare il modello TM-SCLC (Temperature Modulated Space Charge Limited Current)concludendo che i campioni così cresciuti raggiungono un grado di purezza maggiore rispetto al Rubrene bulk ed escludendo la presenza di difetti estrinseci.

Electrical spectroscopy of rubrene bulk and thin film crystals

One of the most diffused electronic device is the field effect transistor (FET), contained in number of billions in each electronic device. Organic optoelectronics is an emerging field that exploits the unique properties of conjugated organic materials to develop new applications that require a combination of performance, low cost and processability. Organic single crystals are the material with best performances and purity among the variety of different form of organic semiconductors. This thesis is focused on electrical and optical characterization of Rubrene single crystal bulk and thin films. Rubrene bulk is well known but for the first time we studied thin films. The first Current-voltage characterization has been performed for the first time on three Rubrene thin films with three different thickness to extract the charge carriers mobility and to assess its crystalline structure. As results we see that mobility increase with thickness. Field effect transistor based on Rubrene thin films on $SiO_2$ have been characterize by current-voltage (I-V) analyses (at several temperatures) and reveals a hopping conduction. Hopping behavior probably is due to the lattice mismatch with the substrate or intrinsic defectivity of the thin films. To understand effects of contact resistance we tested thin films with the Transmission Line Method (TLM) method. The TLM method revealeds that contact resistance is negligible but evidenced a Schottky behavior in a limited but well determined range of T. To avoid this effect we carried out annealing treatment after the electrode evaporation iswe performed a compete I-V characterization as a function of in temperature to extract the electronic density of states (DOS) distribution through the Space Charge Limited Current (SCLC) method. The results show a DOS with an exponential trenddistribution, as expected. The measured mobility of thin films is about 0.1cm^2/Vs and it increases with the film thickness. Further studies are necessary to investigate the reason and improve performances. From photocurrent spectrum we calculated an Eg of about 2.2eV and both thin films and bulk have a good crystal order. Further measurement are necessary to solve some open problems

The Beach in Anglophone Literatures and Cultures: Reading Littoral Space

From early colonial encounters to the ecological disasters of the twenty-first century, the performativity of contact has been a crucial element in the political significance of the beach. Conceptualising the beach as a creative trope and as a socio-cultural site, as well as an aesthetically productive topography, this collection examines its multiplicity of meanings and functions as a natural environment engendering both desire and fear in the human imagination from the Victorian period to the present. The contributors examine literature, film, and art, in addition to moments of encounter and environmental crisis, to highlight the beach as a social space inspiring particular codes of behaviour and specific discourses, as a geographical frontier between land and water, as an historical site of contact and conflict, and as a vacationscape promising regeneration and withdrawal from everyday life. The diversity of the beach is reflected in the geographical range, with essays on locales and texts from Britain, Ireland, the Caribbean, South Africa, the United States, Polynesia, and New Zealand. Focusing on the changed function of the beach as a result of processes of industrialisation and the rise of a modern leisure and health culture, this interdisciplinary volume theorises the beach as a demarcater of the precarious boundary between land and the sea, as well as between nature and culture.

Mechanisms of transfer film formation on data recording heads

The increasing demand for high capacity data storage requires decreasing the head-to-tape gap and reducing the track width. A problem very often encountered is the development of adhesive debris on the heads at low humidity and high temperatures that can lead to an increase of space between the head and media, and thus a decrease in the playback signal. The influence of stains on the playback signal of reading heads is studied using RAW (Read After Write) tests and their influence on the wear of the heads by using indentation technique. The playback signal has been found to vary and the errors to increase as stains form a patchy pattern and grow in size to form a continuous layer. The indentation technique shows that stains reduce the wear rate of the heads. In addition, the wear tends to be more pronounced at the leading edge of the head compared to the trailing one. Chemical analysis of the stains using ferrite samples in conjunction with MP (metal particulate) tapes shows that stains contain iron particles and polymeric binder transferred from the MP tape. The chemical anchors in the binder used to grip the iron particles now react with the ferrite surface to create strong chemical bonds. At high humidity, a thin layer of iron oxyhydroxide forms on the surface of the ferrite. This soft material increases the wear rate and so reduces the amount of stain present on the heads. The stability of the binder under high humidity and under high temperature as well as the chemical reactions that might occur on the ferrite poles of the heads influences the dynamic behaviour of stains. A model of stain formation taking into account the channels of binder degradation and evolution upon different environmental conditions is proposed.

Porous tin film synthesized by electrodeposition and the electrochemical performance for lithium-ion batteries

Porous tin films as anode for lithium-ion batteries are electrodeposited on graphite paper. Homogeneous tin films with significant void space accommodate the volume change during tin lithiation/delithiation. Through adjusting the electrodeposition currents and time, the morphologies and void space of tin films on graphite paper are controllable. At fixed electrodeposition current densities, the prolonged electrodeposition time plays the role in growing big tin particles and resulting the disappearance of void space among tin particles. The increased electrodeposition current plays the role to increase the quantity of tin seeds in thickness of tin film, and the void space among tin particles remains but the thick film limits its electrochemical performance. The tin films electrodeposited at an optimized current densities and for an optimized electrodeposition time, present the best electrochemical performance, because the tin nanoparticles are well dispersed on graphite substrate including void space. The tin film electrodeposited at 0.2 A cm-2 for 2 min shows the capacity of 1.0 mAh cm-2 after 50 charge/discharge cycles. The void space of tin film is very important for the best capacity and cyclic ability. The metallic tin film produced at 0.4 A cm-2 for 3 min remains the uniform and microporous structure after charge/discharge for 50 cycles.

Revolutionaries in Space? A Counter-Review of Interstellar

Should the radical Left interpret the Nolans' Interstellar as a tribute to (neo)liberal expansionism or should we view it as a cautionary tale about a future that is just around the corner, which won't be solved by worm holes or time travel? This review takes the latter position against the recent Jacobin review, which argues the former. Here, I show that Interstellar can be productively reinterpreted as a film about a series of things that will NOT save us from our-late-capitalist-selves.

Investigation of RuO2/Ta2O5 thin film evolution by thermogravimetry combined with mass spectrometry

The thermal evolution process of RuO2–Ta2O5/Ti coatings with varying noble metal content has been investigated under in situ conditions by thermogravimetry combined with mass spectrometry. The gel-like films prepared from alcoholic solutions of the precursor salts (RuCl3·3H2O, TaCl5) onto titanium metal support were heated in an atmosphere containing 20% O2 and 80% Ar up to 600 °C. The evolution of the mixed oxide coatings was followed by the mass spectrometric ion intensity curves. The cracking of retained solvent and the combustion of organic surface species formed were also followed by the mass spectrometric curves. The formation of carbonyl- and carboxylate-type surface species connected to the noble metal was identified by Fourier transform infrared emission spectroscopy. These secondary processes–catalyzed by the noble metal–may play an important role in the development of surface morphology and electrochemical properties. The evolution of the two oxide phases does not take place independently, and the effect of the noble metal as a combustion catalyst was proved.

Numerical approximation of a fractional-in-space diffusion equation (II) - with nonhomogeneous boundary conditions

In this paper, a space fractional di®usion equation (SFDE) with non- homogeneous boundary conditions on a bounded domain is considered. A new matrix transfer technique (MTT) for solving the SFDE is proposed. The method is based on a matrix representation of the fractional-in-space operator and the novelty of this approach is that a standard discretisation of the operator leads to a system of linear ODEs with the matrix raised to the same fractional power. Analytic solutions of the SFDE are derived. Finally, some numerical results are given to demonstrate that the MTT is a computationally e±cient and accurate method for solving SFDE.