Cost information in engineering design -Potentials and limitations of activity-based costing

The purpose of this thesis is to analyse activity-based costing (ABC) and possible modified versions ofit in engineering design context. The design engineers need cost information attheir decision-making level and the cost information should also have a strong future orientation. These demands are high because traditional management accounting has concentrated on the direct actual costs of the products. However, cost accounting has progressed as ABC was introduced late 1980s and adopted widely bycompanies in the 1990s. The ABC has been a success, but it has gained also criticism. In some cases the ambitious ABC systems have become too complex to build,use and update. This study can be called an action-oriented case study with some normative features. In this thesis theoretical concepts are assessed and allowed to unfold gradually through interaction with data from three cases. The theoretical starting points are ABC and theory of engineering design process (chapter2). Concepts and research results from these theoretical approaches are summarized in two hypotheses (chapter 2.3). The hypotheses are analysed with two cases (chapter 3). After the two case analyses, the ABC part is extended to cover alsoother modern cost accounting methods, e.g. process costing and feature costing (chapter 4.1). The ideas from this second theoretical part are operationalized with the third case (chapter 4.2). The knowledge from the theory and three cases is summarized in the created framework (chapter 4.3). With the created frameworkit is possible to analyse ABC and its modifications in the engineering design context. The framework collects the factors that guide the choice of the costing method to be used in engineering design. It also illuminates the contents of various ABC-related costing methods. However, the framework needs to be further tested. On the basis of the three cases it can be said that ABC should be used cautiously when formulating cost information for engineering design. It is suitable when the manufacturing can be considered simple, or when the design engineers are not cost conscious, and in the beginning of the design process when doing adaptive or variant design. If the design engineers need cost information for the embodiment or detailed design, or if manufacturing can be considered complex, or when design engineers are cost conscious, the ABC has to be always evaluated critically.

Factors influencing the evolution of e-commerce : an empirical analysis in a developed market economy

Peer-reviewed

Pencil grip : a descriptive model and four empirical studies

Previous studies on pencil grip have typically dealt with the developmental aspects in young children while handwriting research is mainly concerned with speed and legibility. Studies linking these areas are few. Evaluation of the existing pencil grip studies is hampered by methodological inconsistencies. The operational definitions of pencil grip arerational but tend to be oversimplified while detailed descriptors tend to be impractical due to their multiplicity. The present study introduces a descriptive two-dimensional model for the categorisation of pencil grip suitable for research applications in a classroom setting. The model is used in four empirical studies of children during the first six years of writing instruction. Study 1 describes the pencil grips observed in a large group of pupils in Finland (n = 504). The results indicate that in Finland the majority of grips resemble the traditional dynamic tripod grip. Significant genderrelated differences in pencil grip were observed. Study 2 is a longitudinal exploration of grip stability vs. change (n = 117). Both expected and unexpected changes were observed in about 25 per cent of the children's grips over four years. A new finding emerged using the present model for categorisation: whereas pencil grips would change, either in terms of ease of grip manipulation or grip configuration, no instances were found where a grip would have changed concurrently on both dimensions. Study 3 is a cross-cultural comparison of grips observed in Finland and the USA (n = 793). The distribution of the pencil grips observed in the American pupils was significantly different from those found in Finland. The cross-cultural disparity is most likely related to the differences in the onset of writing instruction. The differences between the boys' and girls' grips in the American group were non-significant.An implication of Studies 2 and 3 is that the initial pencil grip is of foremost importance since pencil grips are largely stable over time. Study 4 connects the pencil grips to assessment of the mechanics of writing (n = 61). It seems that certain previously not recommended pencil grips might nevertheless be includedamong those accepted since they did not appear to hamper either fluency or legibility.

Studies in offset ink setting

The offset printing process is complex and involves the meeting of two essentially complex materials, printing ink and paper, upon which the final product is formed. It can therefore be expected that a multitude of chemical and physical interactions and mechanisms take place at the ink-paper interface. Interactions between ink and paper are of interest to both the papermakers and ink producers, as they wish to achieve better quality in the final product. The objective of this work is to clarify the combined influence of paper coating structure, printing ink and fountain solution on ink setting and the problems related to ink setting. A further aim is to identify the mechanisms that influence ink setting problems, and to be able to counteract them by changing properties of the coating layer or by changing the properties of the ink. The work carried out for this thesis included use of many techniques ranging from standard paper and printability tests to advanced optical techniques for detection of ink filaments during ink levelling. Modern imaging methods were applied for assessment of ink filament remain sizes and distribution of ink components inside pigment coating layers. Gravimetric filtration method and assessment of print rub using Ink-Surface-Interaction-Tester (ISIT) were utilized to study the influence of ink properties on ink setting. The chemical interactions were observed with the help of modified thin layer chromatography and contact angle measurements using both conventional and high speed imaging. The results of the papers in this thesis link the press operational parameters to filament sizes and show the influence of these parameters to filament size distribution. The relative importance between the press operation parameters was shown to vary. The size distribution of filaments is important in predicting the ink setting behaviour, which was highlighted by the dynamic gloss and ink setting studies. Prediction of ink setting behaviour was also further improved by use of separate permeability factors for different ink types in connection to filtration equations. The roles of ink components were studied in connection to ink absorption and mechanism of print rub. Total solids content and ratio of linseed oil to mineral oil were found to determine the degree of print rub on coated papers. Wax addition improved print rub resistance, but would not decrease print rub as much as lowering the total solids content in the ink. Linseed oil was shown to absorb into pigment coating pores by mechanism of adsorption to pore walls, which highlights the need for sufficient pore surface area for improved chromatographic separation of ink components. These results should help press operators, suppliers of printing presses, papermakers and suppliers to papermakers, to better understand the material and operating conditions of the press as it relates to various print quality issues. Even though paper is in competition with electronic media, high quality printed products are still in demand. The results should provide useful information for this segment of the industry.

Computational studies for the design of process equipment with complex geometries

This study combines several projects related to the flows in vessels with complex shapes representing different chemical apparata. Three major cases were studied. The first one is a two-phase plate reactor with a complex structure of intersecting micro channels engraved on one plate which is covered by another plain plate. The second case is a tubular microreactor, consisting of two subcases. The first subcase is a multi-channel two-component commercial micromixer (slit interdigital) used to mix two liquid reagents before they enter the reactor. The second subcase is a micro-tube, where the distribution of the heat generated by the reaction was studied. The third case is a conventionally packed column. However, flow, reactions or mass transfer were not modeled. Instead, the research focused on how to describe mathematically the realistic geometry of the column packing, which is rather random and can not be created using conventional computeraided design or engineering (CAD/CAE) methods. Several modeling approaches were used to describe the performance of the processes in the considered vessels. Computational fluid dynamics (CFD) was used to describe the details of the flow in the plate microreactor and micromixer. A space-averaged mass transfer model based on Fick’s law was used to describe the exchange of the species through the gas-liquid interface in the microreactor. This model utilized data, namely the values of the interfacial area, obtained by the corresponding CFD model. A common heat transfer model was used to find the heat distribution in the micro-tube. To generate the column packing, an additional multibody dynamic model was implemented. Auxiliary simulation was carried out to determine the position and orientation of every packing element in the column. This data was then exported into a CAD system to generate desirable geometry, which could further be used for CFD simulations. The results demonstrated that the CFD model of the microreactor could predict the flow pattern well enough and agreed with experiments. The mass transfer model allowed to estimate the mass transfer coefficient. Modeling for the second case showed that the flow in the micromixer and the heat transfer in the tube could be excluded from the larger model which describes the chemical kinetics in the reactor. Results of the third case demonstrated that the auxiliary simulation could successfully generate complex random packing not only for the column but also for other similar cases.

Profile of three Brazilian birth cohort studies in Ribeirão Preto, SP and São Luís, MA

We describe three birth cohort studies, respectively carried out in 1978/79 and 1994 in Ribeirão Preto, a city located in the most developed region of Brazil, and in 1997/98 in São Luís, a city located in a less developed region. The objective of the present report was to describe the methods used in these three studies, presenting their history, methodological design, objectives, developments, and difficulties faced along 28 years of research. The first Ribeirão Preto study, initially perinatal, later encompassed questions regarding the repercussions of intrauterine development on future growth and chronic adult diseases. The subjects were evaluated at birth (N = 6827), at school age (N = 2861), at the time of recruitment for military service (N = 2048), and at 23/25 years of age (N = 2063). The study of the second cohort, which started in 1994 (N = 2846), permitted comparison of aspects of perinatal health between the two groups in the same region, such as birth weight, mortality and health care use. In 1997/98, a new birth cohort study was started in São Luís (N = 2443), capital of the State of Maranhão. The 1994 Ribeirão Preto cohort and the São Luís cohort are in the second phase of joint follow-up. These studies permit comparative temporal analyses in the same place (Ribeirão Preto 1978/79 and 1994) and comparisons of two contrasting populations regarding cultural, economic and sociodemographic conditions (Ribeirão Preto and São Luís).

Empirical studies on software quality construction: Exploring human factors and organizational influences

Software quality has become an important research subject, not only in the Information and Communication Technology spheres, but also in other industries at large where software is applied. Software quality is not a happenstance; it is defined, planned and created into the software product throughout the Software Development Life Cycle. The research objective of this study is to investigate the roles of human and organizational factors that influence software quality construction. The study employs the Straussian grounded theory. The empirical data has been collected from 13 software companies, and the data includes 40 interviews. The results of the study suggest that tools, infrastructure and other resources have a positive impact on software quality, but human factors involved in the software development processes will determine the quality of the products developed. On the other hand, methods of development were found to bring little effect on software quality. The research suggests that software quality is an information-intensive process whereby organizational structures, mode of operation, and information flow within the company variably affect software quality. The results also suggest that software development managers influence the productivity of developers and the quality of the software products. Several challenges of software testing that affect software quality are also brought to light. The findings of this research are expected to benefit the academic community and software practitioners by providing an insight into the issues pertaining to software quality construction undertakings.

Factors associated with psychotropic drug use among community-dwelling older persons: A review of empirical studies

Affiliation: Faculté de pharmacie, Université de Montréal

Biomimicry and innovation in sustainable design : understanding its innovation supporting characteristics compared to ecodesign

Depuis la dernière décennie, le biomimétisme est une discipline en plein essor dans le monde du design durable. De plus en plus, cette stratégie prend place dans plusieurs facettes du design, que ce soit dans le design industriel, dans l’architecture ou encore dans le design urbain. Le livre de Janine Benyus intitulé Biomimétisme: Quand la Nature Inspire des Innovations Durables (1997) est largement reconnu comme étant le catalyseur de la stratégie et comme l’indique le titre du livre, le biomimétisme est très souvent associé à l’innovation. Le but principal de cette recherche est de mieux comprendre le lien entre le biomimétisme et l’innovation. Cette recherche sur le biomimétisme comprend un objectif mineur et deux objectifs majeurs. Le premier objectif cherche à comprendre le véritable lien entre le biomimétisme et l’écodesign. Le second objectif vise non seulement à valider la théorie selon laquelle le biomimétisme est une stratégie menant à des solutions de design innovantes, mais également à établir quels types d’innovations ont été générés par cette stratégie. Finalement, le troisième objectif est d’identifier les aspects du biomimétisme qui mènent à des solutions de design innovantes. Pour accomplir ces objectifs, cette recherche utilisera une approche qualitative supportée par des études de cas et une revue de littérature. Afin de contextualiser les deux derniers objectifs, cette étude établit que le biomimétisme et l’écodesign sont des stratégies complémentaires plutôt qu’en compétition. Les conclusions de cette recherche démontrent que la théorie proposant que le biomimétisme soit une stratégie d’innovation est valide et que la discipline est surtout apte à générer l’innovation radicale. Finalement, la recherche indique que l’analogie de distance et la transdisciplinarité sont les deux aspects du biomimétisme aidant à produire des solutions de design innovantes. Le biomimétisme est mieux connu dans le contexte du design durable et cette recherche permet de mieux comprendre le biomimétisme dans le contexte de l’innovation. Considérant que le biomimétisme est une discipline qui suscite beaucoup d’intérêt des milieux académiques et privés, cette recherche participe à l’expansion de la connaissance sur le sujet et propose de nouvelles pistes de recherche sur le biomimétisme et l’innovation.

Significance Of Product Type And Brand In The Purchasing Behaviour Of Cattle Feeds: An Empirical Study In Kerala

Cattle feed industry is a major segment of animal feed industry. This industry is gradually evolving into an organized sector and the feed manufactures are increasingly using modern and sophisticated methods that seek to incorporate best global practices. This industry has got high potential for growth in India, given the fact that the country is the world’s leading producer of milk and its production is expected to grow at a compounded annual growth rate of 4 per cent. Besides, the concept of branded cattle feed as a packaged commodity is fast gaining popularity in rural India. There can be a positive change in the demand for cattle feed because of factors like (i) shrinkage of open land for cattle grazing, urbanization and resultant shortage of conventionally used cattle feeds, and (ii) introduction of high yield cattle requires specialized feeds. Earlier research studies done by the present authors have revealed the significant growth prospects of the branded cattle feed industry, the feed consumption pattern and the relatively high share of branded feeds, feed consumption pattern based on product types (like, pellet and mash), composition of cattle feed market and the relatively large shares of Kerala Feeds Ltd. (KFL) and Kerala Solvent Extractions Ltd. (KSE) brands, the major factors influencing the purchasing decisions etc. As a continuation of the earlier studies, this study makes a closer look into the significance of product types in the buyer behavior, level of awareness about the brand and its implications on purchasing decisions, and the brandshifting behavior and its determinants

Development and/or change of the notion of permanent object and operative causality: empirical evidence in the first year of life

This study examines the notion of permanent object during the first year of life, taking into account the controversy of two approaches about the nature of change: developmental change and cognitive change. Using a longitudinal/cross-sectional design, tasks adapted of the subscale of permanent object and operative causality of the Uzgiris-Hunt Scale (Uzgiris and Hunt, 1975) (Uzgiris & Hunt, 1975) were presented to 110 infants of 0, 3, 6 and 9 months-old, which reside in three cities of Colombia. The results showed three types of strategies: (a) Not resolution; (b) Exploratory and (c) Resolution, which follow different trajectories in children’s performance. This allows affirming that adaptive conquests of the cognitive development stay together with the variety of strategies. Using strategies reveals adjustments and transformations of action programs that consolidate the notion of permanent object not necessarily with age, but with self-regulatory processes. Empirical evidence contributes to the understanding of the relations between the emergence of novelty in the development and performance variability

Regulatory governance in the latinamerican telecommunications sector

Empezando con Chile a comienzos de 1980, los países de América Latina han profundizado la reforma a las telecomunicaciones para crear un entorno regulatorio que incentive la inversión privada, en particular la inversión extranjera. En este artículo, trabajo las tendencias regulatorias en el sector telecomunicaciones de 24 países latinoamericanos y del caribe durante el período 1980-1997 y construyo un índice basado en : autonomía, rendición de cuentas, claridad de las funciones y objetivos, transparencia y participación, y el tipo de mandato legal que crea el ente regulador. El índice muestra que, en promedio, la mayoría de los países llevaron a cabo fuertes reformas regulatorias en la dirección sugerida por expertos e investigadores. El índice también se correlación bien con varias variables políticas, de riesgo, económicas y de telecomunicaciones.

An evaluation of Bayesian designs for dose-escalation studies in healthy volunteers

In this paper, Bayesian decision procedures previously proposed for dose-escalation studies in healthy volunteers are reviewed and evaluated. Modifications are made to the expression of the prior distribution in order to make the procedure simpler to implement and a more relevant criterion for optimality is introduced. The results of an extensive simulation exercise to establish the proper-ties of the procedure and to aid choice between designs are summarized, and the way in which readers can use simulation to choose a design for their own trials is described. The influence of the value of the within-subject correlation on the procedure is investigated and the use of a simple prior to reflect uncertainty about the correlation is explored. Copyright (c) 2005 John Wiley & Sons, Ltd.

Using historical lesion volume data in the design of a new phase II clinical trial in acute stroke

Background and Purpose-Clinical research into the treatment of acute stroke is complicated, is costly, and has often been unsuccessful. Developments in imaging technology based on computed tomography and magnetic resonance imaging scans offer opportunities for screening experimental therapies during phase II testing so as to deliver only the most promising interventions to phase III. We discuss the design and the appropriate sample size for phase II studies in stroke based on lesion volume. Methods-Determination of the relation between analyses of lesion volumes and of neurologic outcomes is illustrated using data from placebo trial patients from the Virtual International Stroke Trials Archive. The size of an effect on lesion volume that would lead to a clinically relevant treatment effect in terms of a measure, such as modified Rankin score (mRS), is found. The sample size to detect that magnitude of effect on lesion volume is then calculated. Simulation is used to evaluate different criteria for proceeding from phase II to phase III. Results-The odds ratios for mRS correspond roughly to the square root of odds ratios for lesion volume, implying that for equivalent power specifications, sample sizes based on lesion volumes should be about one fourth of those based on mRS. Relaxation of power requirements, appropriate for phase II, lead to further sample size reductions. For example, a phase III trial comparing a novel treatment with placebo with a total sample size of 1518 patients might be motivated from a phase II trial of 126 patients comparing the same 2 treatment arms. Discussion-Definitive phase III trials in stroke should aim to demonstrate significant effects of treatment on clinical outcomes. However, more direct outcomes such as lesion volume can be useful in phase II for determining whether such phase III trials should be undertaken in the first place. (Stroke. 2009;40:1347-1352.)