Official use of social network sites by African universities

The use of social network sites (SNS) has become very valuable to educational institutions. Some universities have formally integrated these social media in their educational systems and are using them to improve their service delivery. The main aim of this study was to establish whether African universities have embraced this emerging technology by having official presence on SNS. A purposive sampling method was used to study 24 universities from which data were obtained by visiting their official websites and following the official links to the most common SNS.

Water, irrigation and plant diseases

Irrigation is a major husbandry tool, vital for world food production and security. The purpose of this review is twofold:- firstly drawing attention to the beneficial and deleterious aspects of irrigation resulting from interactions with the microbial world; secondly, forming a basis for encouraging further research and development. Irrigation is for example, a valuable component in the control of some soil borne pathogens such as Streptomyces scabies, the cause of potato common scab and Fusarium cubense, a cause of banana wilt. By contrast, applying irrigation encourages some foliar pathogens and factors such as splash dispersal of propagules and the retention of leaf wetness are important elements in the successful establishment of disease foci. Irrigation applied at low levels in the canopy directly towards the stem bases and root zones of plants also provides means encouraging disease development. Irrigation also offers means for the direct spread of microbes such as water borne moulds, Oomycetes, and plasmodial pathogens coming from populations present in the water supply. The presence of plant disease causing microbes in sources of irrigation has been associated with outbreaks of diseases such as clubroot (Plasmodiophora brassicae). Irrigation can be utilised as a means for applying agrochemicals, fungigation. The developing technologies of water restriction and root zone drying also have an impact on the success of disease causing organisms. This is an emerging technology and its interactions with benign and pathogenic microbes require consideration.

Developing a Communication link between Agents and cross Platform IDE

The main objective of this thesis work is to develop communication link between Runrev Revolution (IDE) and JADE (Multi-Agent System) through Socket programming using TCP/IP layer. These two independent platforms are connected using socket programming technique. Socket programming is considered to be newly emerging technology among these two platforms, the work done in this thesis work is considered to be a prototype.A Graphical simulation model is developed by salixphere (Company in Hedemora) to simulate logistic problems using Runrev Revolution (IDE). The simulation software/program is called “BIOSIM”. The logistic problems are complex, and conventional optimization techniques are unlikely very successful. “BIOSIM” can demonstrate the graphical representation of logistic problems depending upon the problem domains. As this simulation model is developed in revolution programming language (Transcript) which is dynamically typed and English-like language, it is quite slow compared to other high level programming languages. The object of this thesis work is to add intelligent behaviour in graphical objects and develop communication link between Runrev revolution (IDE) and JADE (Multi-Agent System) using TCP/IP layers.The test shows the intelligent behaviour in the graphical objects and successful communication between Runrev Revolution (IDE) and JADE (Multi-Agent System).

Electrical Evaluation of a Low Concentrating PVT Collector Based on Performance Ratio

Photovoltaic Thermal/Hybrid collectors are an emerging technology that combines PV and solar thermal collectors by producing heat and electricity simultaneously. In this paper, the electrical performance evaluation of a low concentrating PVT collector was done through two testing parts: power comparison and performance ratio testing. For the performance ratio testing, it is required to identify and measure the factors affecting the performance ratio on a low concentrating PVT collector. Factors such as PV cell configuration, collector acceptance angle, flow rate, tracking the sun, temperature dependence and diffuse to irradiance ratio. Solarus low concentrating PVT collector V12 was tested at Dalarna University in Sweden using the electrical equipment at the solar laboratory. The PV testing has showed differences between the two receivers. Back2 was producing 1.8 energy output more than Back1 throughout the day. Front1 and Front2 were almost the same output performance. Performance tests showed that the cell configuration for Receiver2 with cells grouping (6- 32-32-6) has proved to have a better performance ratio when to it comes to minimizing the shading effect leading to more output power throughout the day because of lowering the mismatch losses. Different factors were measured and presented in this thesis in chapter 5. With the current design, it has been obtained a peak power at STC of 107W per receiver. The solar cells have an electrical efficiency of approximately 19% while the maximum measured electrical efficiency for the collector was approximately 18 % per active cell area, in addition to a temperature coefficient of -0.53%/ ˚C. Finally a recommendation was done to help Solarus AB to know how much the electrical performance is affected during variable ambient condition and be able to use the results for analyzing and introducing new modification if needed.

Evaluation of a PVT Air Collector

Hybrid Photovoltaic Thermal (PVT) collectors are an emerging technology that combines PV and solar thermal systems in a single solar collector producing heat and electricity simultaneously. The focus of this thesis work is to evaluate the performance of unglazed open loop PVT air system integrated on a garage roof in Borlänge. As it is thought to have a significant potential for preheating ventilation of the building and improving the PV modules electrical efficiency. The performance evaluation is important to optimize the cooling strategy of the collector in order to enhance its electrical efficiency and maximize the production of thermal energy. The evaluation process involves monitoring the electrical and thermal energies for a certain period of time and investigating the cooling effect on the performance through controlling the air mass flow provided by a variable speed fan connected to the collector by an air distribution duct. The distribution duct transfers the heated outlet air from the collector to inside the building. The PVT air collector consists of 34 Solibro CIGS type PV modules (115 Wp for each module) which are roof integrated and have replaced the traditional roof material. The collector is oriented toward the south-west with a tilt of 29 ᵒ. The collector consists of 17 parallel air ducts formed between the PV modules and the insulated roof surface. Each air duct has a depth of 0.05 m, length of 2.38 m and width of 2.38 m. The air ducts are connected to each other through holes. The monitoring system is based on using T-type thermocouples to measure the relevant temperatures, air sensor to measure the air mass flow. These parameters are needed to calculate the thermal energy. The monitoring system contains also voltage dividers to measure the PV modules voltage and shunt resistance to measure the PV current, and AC energy meters which are needed to calculate the produced electrical energy. All signals recorded from the thermocouples, voltage dividers and shunt resistances are connected to data loggers. The strategy of cooling in this work was based on switching the fan on, only when the difference between the air duct temperature (under the middle of top of PV column) and the room temperature becomes higher than 5 °C. This strategy was effective in term of avoiding high electrical consumption by the fan, and it is recommended for further development. The temperature difference of 5 °C is the minimum value to compensate the heat losses in the collecting duct and distribution duct. The PVT air collector has an area of (Ac=32 m2), and air mass flow of 0.002 kg/s m2. The nominal output power of the collector is 4 kWppv (34 CIGS modules with 115 Wppvfor each module). The collector produces thermal output energy of 6.88 kWth/day (0.21 kWth/m2 day) and an electrical output energy of 13.46 kWhel/day (0.42 kWhel/m2 day) with cooling case. The PVT air collector has a daily thermal energy yield of 1.72 kWhth/kWppv, and a daily PV electrical energy yield of 3.36 kWhel /kWppv. The fan energy requirement in this case was 0.18 kWh/day which is very small compared to the electrical energy generated by the PV collector. The obtained thermal efficiency was 8 % which is small compared to the results reported in literature for PVT air collectors. The small thermal efficiency was due to small operating air mass flow. Therefore, the study suggests increasing the air mass flow by a factor of 25. The electrical efficiency was fluctuating around 14 %, which is higher than the theoretical efficiency of the PV modules, and this discrepancy was due to the poor method of recording the solar irradiance in the location. Due to shading effect, it was better to use more than one pyranometer.

OzBot TM - Haptic augmentation of a teleoperated robotic platform for search and rescue operations

A continued increase in computing power, sensor capability, software functionality, immersive interfaces and hardware modularity has given robot designers seemingly endless potential in the area of mobile robotics.  While some mobile robotic system designers are focusing on expensive, full-featured platforms, developers are realising the advantages of emerging technology in providing small, low-cost mobile reconnaissance vehicles as expendable teleoperated robotic systems.  The OzBot^TM mobile reconnaissance platform presents one such system.  The design objectives of the OzBot^TM platform focus on the development of inexpensive, lightweight carry-case sized robots for search and rescue operations, law enforcement scenarios and hazardous environment inspection.  The incorporation of Haptic augmentation provides the teleoperator with improved task immersion for an outdoor search and rescue scenario.  Achieved in cooperation with law enforcement agencies within Australia, this paper discusses the performance of the first four revisions of the OzBot^TM platform.

An empirical examination of feedback : user control and performance in a hapto-audio-visual training environment

Utilising advanced technologies, such as virtual environments (VEs), is of importance to training and education. The need to develop and effectively apply interactive, immersive 3D VEs continues to grow. As with any emerging technology, user acceptance of new software and hardware devices is often difficult to measure and guidelines to introduce and ensure adequate and correct usage of such technologies are lacking. It is therefore imperative to obtain a solid understanding of the important elements that play a role in effective learning through VEs. In particular, 3D VEs may present unusual and varied interaction and adoption considerations. The major contribution of this study is to investigate a complex set of interrelated factors in the relatively new sphere of VEs for training and education. Although many of the factors appears to be important from past research, researcher have not explicitly studied a comprehensive set of inter-dependant, empirically validated factors in order to understand how VEs aid complex procedural knowledge and motor skill learning. By integrating theory from research on training, human computer interaction (HCI), ergonomics and cognitive psychology, this research proposes and validates a model that contributes to application-specific VE efficacy formation. The findings of this study show visual feedback has a significant effect on performance. For tactile/force feedback and auditory feedback, no significant effect were found. For satisfaction, user control is salient for performance. Other factors such as interactivity and system comfort, as well as level of task difficulty, also showed effects on performance.

Deakin's e-book device loan trial

Powerpoint presentation presenting an overview of e-books and e-content at Deakin University, revolving around the e-readers trials that were done in 2010 at Deakin University Library.

Factors to consider when planning to submit a digital thesis

Emerging technologies offer new possibilities of text production. Consequently there are important implications for submitting a digitalised thesis. This paper reflects upon some of the issues associated with the digitalisation of the thesis entitled "The literacy practices of Kunib¡dji children: Text, technology and transformation". This PhD thesis was submitted in a multimedia format on a DVD and reported on the literacy practices of a group of Indigenous Australian children who spoke a minority Indigenous Australian language. Factors to consider when digitalising a thesis include the social possibilities of emerging technologies. These are explored with reference to the purpose of research in changing times. The opportunities to integrate a number of texts in the submitted thesis are demonstrated. The use of multimodal texts to improve the validity of the research is discussed using examples of digital video and interactive texts in a minority Indigenous Australian language context. This paper concludes that the digitisation of a thesis should be guided by the possibilities for conceptualising and reporting new knowledge while upholding an ethic of respect for the participants.

Security concerns and remedy in a cloud based e-learning system

Cloud computing is an emerging technology and it utilizes the cloud power to many technical solutions. The e-learning solution is one of those technologies where it implements the cloud power in its existing system to enhance the functionality providing to e-learners. Cloud technology has numerous advantages over the existing traditional e-learning systems. However security is a major concern in cloud based e-learning. Therefore security measures are unavoidable to prevent the loss of users’ valuable data from the security vulnerabilities. This paper investigates various security issues involved in cloud based e-learning technology with an aim to suggest remedial in the form of security measures and security management standards. These will help to overcome the security threats in cloud based e-learning technology. Solving the key problems will also encourage the widespread adoption of cloud computing in educational institutes.

Kinomatics: a global study into cinema data

This paper describes a creative industries research project that has applied quantitative approaches commonly used in scientific research to the study of international cinema performance. Using film screening data collected over a two year period, this paper discusses analysis of a global dataset using Appadurai's "-scapes" framework. We have identified several of these "-scapes" that help us investigate film industry behaviour. Concentrating on Appadurai's "Technoscape" an investigation into the geographic spread and distribution of a new and emerging technology, High Frame Rate cinema, has been made. HFR films have screened around the world to mixed reviews. Geographic distribution of HFR technologies and change in this distribution has also been uneven.

O significado da distribuição para os grandes bancos verejistas: análise e consequências sob o ponto de vista de marketing

Trata da revolução em curso nos canais de distribuição dos grandes bancos varejistas em função dos impactos provocados pela tecnologia, pela globalização, pelas parcerias e pela formação de um novo ambiente de distribuição eletrônico, remoto e virtual denominado como marketspace. Esse novo ambiente, até o ano de 2007, deverá canalizar 2/3 dos negócios bancários que envolvam efetiva intermediação financeira. A revolução é tão importante que pode significar o início de um novo ciclo no negócio dos grandes bancos varejistas. Os impactos sobre marketing são igualmente poderosos, exigindo dos bancos uma completa revisão de sua estratégia mercadológica. Evidências foram colhidas de extensiva revisão bibliográfica, através de entrevistas em profundidade e de pesquisa amostrai com clientes bancários. Cursos de ação são sugeridos.

Fuel cell cogeneration system: a case of technoeconomic analysis

Fuel Cell is the emerging technology of cogeneration, and has been applied successfully in Japan, U.S.A. and some OECD countries. This system produces electric power by an electrolytic process, in which chemical substances (the most utilized substances are solid oxide, phosphoric acid and molten carbonate) absorb the components H-2 and O-2 of the combustion fuel. This technology allows the recovery of residual heat, available from 200 degrees C up to 1000 degrees C (depending on the electrochemical substance utilized), which can be used for the production of steam, hot or cold water, or hot or cold air, depending on the recuperation equipment used. This article presents some configurations of fuel cell cogeneration cycles and a study of the technical and economic feasibility for the installation of the cogeneration systems utilizing fuel cell, connected to an absorption refrigeration system for st building of the tertiary sector, subject to conditions in Brazil. (C) 1999 Elsevier B.V. Ltd. All rights reserved.

Development of a real-time PCR method for rapid sexing of human preimplantation embryos

Genes on the X chromosome are known to be responsible for more than 200 hereditary diseases. After IVF, the simple selection of embryo sex before uterine transfer can prevent the occurrence of affected offspring among couples at risk for these genetic disorders. The aim of this investigation was to develop a rapid method of preimplantation genetic diagnosis (PGD) using real-time polymerase chain reaction (PCR) for the sexing of human embryos, and to compare it to the fluorescence in-situ hybridization technique, considered to be the gold standard. After biopsies were obtained from 40 surplus non-viable embryos for transfer, a total of 98 blastomeres were analysed. It was possible to analyse 24 embryos (60%) by both techniques, generating a total of 70 blastomeres (35 per technique), white 28 blastomeres from 16 embryos (40%) were analysed only by real-time PCR. A rapid and safe method was developed in the present study for the sexual diagnosis of a single human cell (blastomere and buccal cell) using the emerging technology of real-time PCR. (C) 2009, Reproductive Healthcare Ltd. Published by Elsevier Ltd. All rights reserved.