On Non-ideal and Chaotic Energy Harvester Behavior

In this paper, we deal with the research of a proposed mathematical model of energy harvesting, including nonlinearities in the piezoelectric coupling and a non-ideal force of excitation. We showed using numerical simulations to analysis of the dynamic responses that, the power harvested was influenced by the nonlinear vibrations of the structure, as well as by the influence of the non-linearities in the piezoelectric coupling. We concluded through of the numerical results that the limited energy source was interacting with the system. Thus, the increasing of the voltage in DC motor led the system produce a good power response, especially in high-energy orbits in the resonance region, but the Sommerfeld effect occurs in the system and a chaotic behavior was found in the post-resonance region. So the power harvested along the time decreases because occurs loses of energy due the interaction between energy source and structure. Keeping the energy harvested constant over time is essential to make possible the use of energy harvesting systems in real applications. To achieve this objective, we applied a control technique in order to stabilize the chaotic system in a periodic stable orbit. We announced that the results were satisfactory and the control maintained the system in a stable condition. © 2012 Foundation for Scientific Research and Technological Innovation.

The role of the State and the quality of the public sector

Sectoral policies make explicit and implicit assumptions about the behaviour and capabilities of the agents (such as dynamic responses to market signals, demand-led assistance, collaborative efforts, participation in financing); which we consider to be rather unrealistic. Because of this lack of realism, policies that aim to be neutral often turn out to be highly exclusive. They fail to give sufficient importance to the special features of the sector -with its high climatic, biological and commercial risks and its slow adaptation- or to the fact that those who take decisions in agriculture are now mostly in an inferior position because of their incomes below the poverty line, their inadequate training, their traditions based on centuries of living in precarious conditions, and their geographical location in marginal areas, far from infrastructure and with only a minimum of services and sources of information. These people have only scanty and imperfect access to the markets which, according to the prevailing model, should govern decisions and the (re);distribution of the factors of production. In our opinion, this explains the patchy and lower-than-expected growth registered by the sector after the reforms to promote the liberalization of markets and external openness in the region. In view of the results of the application of the new model, it may be wondered whether Latin America can afford a form of development which excludes over half of its agricultural producers; what the alternatives are; and what costs and benefits each of them offers in terms of production and monetary, social, spatial and other aspects. The article outlines the changes in policies and their results at the aggregate level, summarizes the arguments usually put forward to explain agricultural performance in the region, and proposes a second set of explanations based on a description of the agents and the responses that may be expected from them, contrasting the latter with the supposedly neutral nature of the policies.

Isolamento passivo de vibrações aleatórias atuantes sobre equipamentos eletrônicos aeronaúticos embarcados

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Paralelismo de inversores monofásicos, isolados ou em conexão com a rede, com otimização da resposta dinâmica

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Nonlinear dynamics and control strategies: On a energy harvester vibrating system with a linear form to non-ideal motor torque

In this paper, we deal with the research of a vibrating model of an energy harvester device, including the nonlinearities in the model of the piezoelectric coupling and the non-ideal excitation. We show, using numerical simulations, in the analysis of the dynamic responses, that the harvested power is influenced by non-linear vibrations of the structure. Chaotic behavior was also observed, causing of the loss of energy throughout the simulation time. Using a perturbation technique, we find an approximate analytical solution for the non-ideal system. Then, we apply both two control techniques, to keep the considered system, into a stable condition. Both the State Dependent Ricatti Equation (SDRE) control as the feedback control by changing the energy of the oscillator, were efficient in controlling of the considered non-ideal system.

Structural damage detection in an aeronautical panel using analysis of variance

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of β-adrenoceptor antagonists on autonomic control of ciliary smooth muscle

Purpose: Pharmacological intervention with peripheral sympathetic transmission at ciliary smooth muscle neuro-receptor junctions has been used against a background of controlled parasympathetic activity to investigate the characteristics of autonomic control of ocular accommodation. Methods: A continuously recording infrared optometer was used to measure accommodation on a group of five visually normal emmetropic subjects under open- and closed-loop conditions. A double-blind protocol between saline, timolol and betaxolol was used to differentiate between the localised action on ciliary smooth muscle and effects induced by changes in stimulus conditions. Data were collected before and 45 min following the instillation of saline, timolol or betaxolol. Open-loop post-task decay was investigated following 3 min sustained near fixation of a stimulus placed 3 D above the subject's pre-task tonic accommodation level. Closed-loop dynamic responses were recorded for each treatment condition while subjects viewed sinusoidally (0.05-0.6 Hz) or stepwise vergence-modulated targets over a 2 D range (2-4 D). Results: Open-loop data demonstrate a rapid post-task regression to pre-task tonic accommodation levels for saline and betaxolol control conditions. A slow positive post-task shift was induced by timolol indicating that sympathetic inhibition contributes to accommodative adaptation during sustained near vision. Closed-loop accommodation responses to temporally modulated sinusoidal stimuli showed characteristic features for both saline and betaxolol control conditions. Timolol induced a reduced gain for low- and mid-temporal frequencies (< 0.3 Hz) but did not affect the response at higher temporal frequencies. Response times to stepwise stimuli increased following the instillation of timolol for the near-to-far fixation condition compared with the controls and was related to the period of sustained prior fixation. Conclusions: Modulation of accommodation under open- and closed-loop conditions by a non-selective β-blocker is consistent with the temporal and inhibitory features of sympathetic innervation to ciliary smooth muscle. Although parasympathetic innervation predominates there is evidence to support a role for sympathetic innervation in the control of ocular accommodation. © 2002 The College of Optometrists.

Applications of Reissner's principle to structural dynamics

The analysis and prediction of the dynamic behaviour of s7ructural components plays an important role in modern engineering design. :n this work, the so-called "mixed" finite element models based on Reissnen's variational principle are applied to the solution of free and forced vibration problems, for beam and :late structures. The mixed beam models are obtained by using elements of various shape functions ranging from simple linear to complex cubic and quadratic functions. The elements were in general capable of predicting the natural frequencies and dynamic responses with good accuracy. An isoparametric quadrilateral element with 8-nodes was developed for application to thin plate problems. The element has 32 degrees of freedom (one deflection, two bending and one twisting moment per node) which is suitable for discretization of plates with arbitrary geometry. A linear isoparametric element and two non-conforming displacement elements (4-node and 8-node quadrilateral) were extended to the solution of dynamic problems. An auto-mesh generation program was used to facilitate the preparation of input data required by the 8-node quadrilateral elements of mixed and displacement type. Numerical examples were solved using both the mixed beam and plate elements for predicting a structure's natural frequencies and dynamic response to a variety of forcing functions. The solutions were compared with the available analytical and displacement model solutions. The mixed elements developed have been found to have significant advantages over the conventional displacement elements in the solution of plate type problems. A dramatic saving in computational time is possible without any loss in solution accuracy. With beam type problems, there appears to be no significant advantages in using mixed models.

Essays in open economy macroeconomics

Research macroeconomists have witnessed remarkable methodological developments in mathematical, statistical, and computational tools during the last two decades. The three essays in this dissertation took advantage of these advances to analyze important macroeconomic issues. ^ The first essay, “ Habit Formation, Adjustments Costs, and International Business Cycle Puzzles” analyzes the extent to which incorporating habit formation and adjustment costs in investment in a one-good two-country general equilibrium model would help overcome some of the international business cycle puzzles. Unlike standard results in the literature, the model generates persistent, cyclical adjustment paths in response to shocks. It also yields positive cross-country correlations in consumption, employment, investment, and output. Cross-country correlations in output are higher than the ones in consumption. This is qualitatively consistent with the stylized facts. These results are particularly striking given the predicted negative correlations in investment, employment, and output that are typically found in the literature. ^ The second essay, “Comparison Utility, Endogenous Time Preference, and Economic Growth,” uses World War II as a natural experiment to analyze the degree to which a model where consumers' preferences exhibit comparison-based utility and endogenous discounting is able to improve upon existing models in mimicking the transitional dynamics of an economy after a shock that destroys part of its capital stock. The model outperforms existing ones in replicating the behavior of the saving rate (both on impact and along the transient paths) after this historical event. This result brings additional support to the endogenous rate of time preference being a crucial element in growth models. ^ The last essay, “Monetary Policy under Fear of Floating: Modeling the Dominican Economy,” presents a small scale macroeconomic model for a country (Dominican Republic) characterized by a strong presence of fear of floating (reluctance to have a flexible exchange rate regime) in the conduct of monetary policy. The dynamic responses of this economy to external shocks that are of interest for monetary policy purposes are analyzed under two alternative interest rate policy rules: One being the standard Taylor rule and another that responds explicitly to deviations of the exchange rate with respect to its long-term trend. ^

Essays in Open Economy Macroeconomics

Research macroeconomists have witnessed remarkable methodological developments in mathematical, statistical, and computational tools during the last two decades. The three essays in this dissertation took advantage of these advances to analyze important macroeconomic issues. The first essay, “ Habit Formation, Adjustments Costs, and International Business Cycle Puzzles” analyzes the extent to which incorporating habit formation and adjustment costs in investment in a one-good two-country general equilibrium model would help overcome some of the international business cycle puzzles. Unlike standard results in the literature, the model generates persistent, cyclical adjustment paths in response to shocks. It also yields positive cross-country correlations in consumption, employment, investment, and output. Cross-country correlations in output are higher than the ones in consumption. This is qualitatively consistent with the stylized facts. These results are particularly striking given the predicted negative correlations in investment, employment, and output that are typically found in the literature. The second essay, “Comparison Utility, Endogenous Time Preference, and Economic Growth,” uses World War II as a natural experiment to analyze the degree to which a model where consumers' preferences exhibit comparison-based utility and endogenous discounting is able to improve upon existing models in mimicking the transitional dynamics of an economy after a shock that destroys part of its capital stock. The model outperforms existing ones in replicating the behavior of the saving rate (both on impact and along the transient paths) after this historical event. This result brings additional support to the endogenous rate of time preference being a crucial element in growth models. The last essay, “Monetary Policy under Fear of Floating: Modeling the Dominican Economy,” presents a small scale macroeconomic model for a country (Dominican Republic) characterized by a strong presence of fear of floating (reluctance to have a flexible exchange rate regime) in the conduct of monetary policy. The dynamic responses of this economy to external shocks that are of interest for monetary policy purposes are analyzed under two alternative interest rate policy rules: One being the standard Taylor rule and another that responds explicitly to deviations of the exchange rate with respect to its long-term trend.

A Delay Vector Variance based marker for an output-only assessment of structural changes in tension leg platforms

Although aspects of power generation of many offshore renewable devices are well understood, their dynamic responses under high wind and wave conditions are still to be investigated to a great detail. Output only statistical markers are important for these offshore devices, since access to the device is limited and information about the exposure conditions and the true behaviour of the devices are generally partial, limited, and vague or even absent. The markers can summarise and characterise the behaviour of these devices from their dynamic response available as time series data. The behaviour may be linear or nonlinear and consequently a marker that can track the changes in structural situations can be quite important. These markers can then be helpful in assessing the current condition of the structure and can indicate possible intervention, monitoring or assessment. This paper considers a Delay Vector Variance based marker for changes in a tension leg platform tested in an ocean wave basin for structural changes brought about by single column dampers. The approach is based on dynamic outputs of the device alone and is based on the estimation of the nonlinearity of the output signal. The advantages of the selected marker and its response with changing structural properties are discussed. The marker is observed to be important for monitoring the as- deployed structural condition and is sensitive to changes in such conditions. Influence of exposure conditions of wave loading is also discussed in this study based only on experimental data.

The Hurst exponent as an indicator of the behaviour of a model monopile in an ocean wave testing basin

With the importance of renewable energy well-established worldwide, and targets of such energy quantified in many cases, there exists a considerable interest in the assessment of wind and wave devices. While the individual components of these devices are often relatively well understood and the aspects of energy generation well researched, there seems to be a gap in the understanding of these devices as a whole and especially in the field of their dynamic responses under operational conditions. The mathematical modelling and estimation of their dynamic responses are more evolved but research directed towards testing of these devices still requires significant attention. Model-free indicators of the dynamic responses of these devices are important since it reflects the as-deployed behaviour of the devices when the exposure conditions are scaled reasonably correctly, along with the structural dimensions. This paper demonstrates how the Hurst exponent of the dynamic responses of a monopile exposed to different exposure conditions in an ocean wave basin can be used as a model-free indicator of various responses. The scaled model is exposed to Froude scaled waves and tested under different exposure conditions. The analysis and interpretation is carried out in a model-free and output-only environment, with only some preliminary ideas regarding the input of the system. The analysis indicates how the Hurst exponent can be an interesting descriptor to compare and contrast various scenarios of dynamic response conditions.

Wave energy conversion of oscillating water column devices including air compressibility

This paper presents an investigation on air compressibility in the air chamber and its effects on the power conversion of oscillating water column (OWC) devices. As it is well known that for practical OWC plants, their air chambers may be large enough for accommodating significant air compressibility, the “spring effect,” an effect that is frequently and simply regarded to store and release energy during the reciprocating process of a wave cycle. Its insight effects on the device’s performance and power conversion, however, have not been studied in detail. This research will investigate the phenomena with a special focus on the effects of air compressibility on wave energy conversion. Air compressibility itself is a complicated nonlinear process in nature, but it can be linearised for numerical simulations under certain assumptions for frequency domain analysis. In this research work, air compressibility in the OWC devices is first linearised and further coupled with the hydrodynamics of the OWC. It is able to show mathematically that in frequency-domain, air compressibility can increase the spring coefficients of both the water body motion and the device motion (if it is a floating device), and enhance the coupling effects between the water body and the structure. Corresponding to these changes, the OWC performance, the capture power, and the optimised Power Take-off (PTO) damping coefficient in the wave energy conversion can be all modified due to air compressibility. To validate the frequency-domain results and understand the problems better, the more accurate time-domain simulations with fewer assumptions have been used for comparison. It is shown that air compressibility may significantly change the dynamic responses and the capacity of converting wave energy of the OWC devices if the air chamber is very large.

Comparative performance analysis of drives for induction motors

The asynchronous polyphase induction motor has been the motor of choice in industrial settings for about the past half century because power electronics can be used to control its output behavior. Before that, the dc motor was widely used because of its easy speed and torque controllability. The two main reasons why this might be are its ruggedness and low cost. The induction motor is a rugged machine because it is brushless and has fewer internal parts that need maintenance or replacement. This makes it low cost in comparison to other motors, such as the dc motor. Because of these facts, the induction motor and drive system have been gaining market share in industry and even in alternative applications such as hybrid electric vehicles and electric vehicles. The subject of this thesis is to ascertain various control algorithms’ advantages and disadvantages and give recommendations for their use under certain conditions and in distinct applications. Four drives will be compared as fairly as possible by comparing their parameter sensitivities, dynamic responses, and steady-state errors. Different switching techniques are used to show that the motor drive is separate from the switching scheme; changing the switching scheme produces entirely different responses for each motor drive.

Monitoramento e identificação numérico e experimental de danos em vigas e pontes de aço e concreto utilizando transformadas de wavelet

Tese (doutorado)—Universidade de Brasília, Faculdade de Tecnologia, Departamento de Engenharia Civil e Ambiental, 2015.