Benefits of Induced Host Responses against an Ectoparasite

As a consequence of the deleterious effects of parasites on host fitness, hosts have evolved responses to minimize the negative impact of parasite infection. Facultative parasite-induced responses are favoured when the risk of infection is unpredictable and host responses are costly. In vertebrates, induced responses are generally viewed as being adaptive, although evidence for fitness benefits arising from these responses in natural host populations is lacking. Here we provide experimental evidence for direct reproductive benefits in flea-infested great tit nests arising from exposure during egg production to fleas. In the experiment we exposed a group of birds to fleas during egg laying (the exposed group), thereby allowing for induced responses, and kept another group free of parasites (the unexposed group) over the same time period. At the start of incubation, we killed the parasites in both groups and all nests were reinfested with fleas. If induced responses occur and are adaptive, we expect that birds of the exposed group mount earlier responses and achieve higher current reproductive success than birds in the unexposed group. In agreement with this prediction, our results show that birds with nests infested during egg-laying have (i) fewer breeding failures and raise a higher proportion of hatchlings to hedging age; () offspring that reach greater body mass, grow longer feathers, and hedge earlier, and (iii) a higher number of recruits and first-year grandchildren than unexposed birds. Flea reproduction and survival did not differ significantly between the two treatments. These results provide the first evidence for the occurrence and the adaptiveness of induced responses against a common ectoparasite in a wild population of vertebrates. [References: 50]

IMPROVING STARTABILITY AND REDUCING EMISSIONS IN FLEXFUEL SPARK IGNITION DIRECT INJECTION VARIABLE CAM TIMING ENGINE

Experimental work and analysis was done to investigate engine startup robustness and emissions of a flex-fuel spark ignition (SI) direct injection (DI) engine. The vaporization and other characteristics of ethanol fuel blends present a challenge at engine startup. Strategies to reduce the enrichment requirements for the first engine startup cycle and emissions for the second and third fired cycle at 25°C ± 1°C engine and intake air temperature were investigated. Research work was conducted on a single cylinder SIDI engine with gasoline and E85 fuels, to study the effect on first fired cycle of engine startup. Piston configurations that included a compression ratio change (11 vs 15.5) and piston geometry change (flattop vs bowl) were tested, along with changes in intake cam timing (95,110,125) and fuel pressure (0.4 MPa vs 3 MPa). The goal was to replicate the engine speed, manifold pressure, fuel pressure and testing temperature from an engine startup trace for investigating the first fired cycle for the engine. Results showed bowl piston was able to enable lower equivalence ratio engine starts with gasoline fuel, while also showing lower IMEP at the same equivalence ratio compared to flat top piston. With E85, bowl piston showed reduced IMEP as compression ratio increased at the same equivalence ratio. A preference for constant intake valve timing across fuels seemed to indicate that flattop piston might be a good flex-fuel piston. Significant improvements were seen with higher CR bowl piston with high fuel pressure starts, but showed no improvement with low fuel pressures. Simulation work was conducted to analyze initial three cycles of engine startup in GT-POWER for the same set of hardware used in the experimentations. A steady state validated model was modified for startup conditions. The results of which allowed an understanding of the relative residual levels and IMEP at the test points in the cam phasing space. This allowed selecting additional test points that enable use of higher residual levels, eliminating those with smaller trapped mass incapable of producing required IMEP for proper engine turnover. The second phase of experimental testing results for 2nd and 3rd startup cycle revealed both E10 and E85 prefer the same SOI of 240°bTDC at second and third startup cycle for the flat top piston and high injection pressures. E85 fuel optimal cam timing for startup showed that it tolerates more residuals compared to E10 fuel. Higher internal residuals drives down the Ø requirement for both fuels up to their combustion stability limit, this is thought to be direct benefit to vaporization due to increased cycle start temperature. Benefits are shown for an advance IMOP and retarded EMOP strategy at engine startup. Overall the amount of residuals preferred by an engine for E10 fuel at startup is thought to be constant across engine speed, thus could enable easier selection of optimized cam positions across the startup speeds.

SolarPaces 2013: Innovations on direct steam generation in linear fresnel collectors

Direct Steam Generation (DSG) in Linear Fresnel (LF) solar collectors is being consolidated as a feasible technology for Concentrating Solar Power (CSP) plants. The competitiveness of this technology relies on the following main features: water as heat transfer fluid (HTF) in Solar Field (SF), obtaining high superheated steam temperatures and pressures at turbine inlet (500ºC and 90 bar), no heat tracing required to avoid HTF freezing, no HTF degradation, no environmental impacts, any heat exchanger between SF and Balance Of Plant (BOP), and low cost installation and maintenance. Regarding to LF solar collectors, were recently developed as an alternative to Parabolic Trough Collector (PTC) technology. The main advantages of LF are: the reduced collector manufacturing cost and maintenance, linear mirrors shapes versus parabolic mirror, fixed receiver pipes (no ball joints reducing leaking for high pressures), lower susceptibility to wind damages, and light supporting structures allowing reduced driving devices. Companies as Novatec, Areva, Solar Euromed, etc., are investing in LF DSG technology and constructing different pilot plants to demonstrate the benefits and feasibility of this solution for defined locations and conditions (Puerto Errado 1 and 2 in Murcia Spain, Lidellin Newcastle Australia, Kogran Creek in South West Queensland Australia, Kimberlina in Bakersfield California USA, Llo Solar in Pyrénées France,Dhursar in India,etc). There are several critical decisions that must be taken in order to obtain a compromise and optimization between plant performance, cost, and durability. Some of these decisions go through the SF design: proper thermodynamic operational parameters, receiver material selection for high pressures, phase separators and recirculation pumps number and location, pipes distribution to reduce the amount of tubes (reducing possible leaks points and transient time, etc.), etc. Attending to these aspects, the correct design parameters selection and its correct assessment are the main target for designing DSG LF power plants. For this purpose in the recent few years some commercial software tools were developed to simulatesolar thermal power plants, the most focused on LF DSG design are Thermoflex and System Advisor Model (SAM). Once the simulation tool is selected,it is made the study of the proposed SFconfiguration that constitutes the main innovation of this work, and also a comparison with one of the most typical state-of-the-art configuration. The transient analysis must be simulated with high detail level, mainly in the BOP during start up, shut down, stand by, and partial loads are crucial, to obtain the annual plant performance. An innovative SF configurationwas proposed and analyzed to improve plant performance. Finally it was demonstrated thermal inertia and BOP regulation mode are critical points in low sun irradiation day plant behavior, impacting in annual performance depending on power plant location.

Examining the University of Denver's Family Friendly Benefits Plans: A look at Creating More Family Friendly Benefits to Drive Employee Retention

In the latter half of the twentieth century the workforce dynamic changed when the number of women entering the workforce increased by record amounts. In direct opposition to this change was the inability of organizations to meet the needs of employees with childcare concerns. Organizations and employees alike are best served when policies, procedures, and benefits are implemented to achieve a positive work/life balance. Companies that institute benefits that are supportive to families observe decreases in turnover and increased employee retention. Employees who are offered family friendly resources have been known to stay with companies even when offered a higher salary elsewhere. Demonstrating that retention of valued employees is linked to an organizations ability to offer support for family needs.

Differences in sharing knowledge interpersonally and via databases: The role of evaluation apprehension and perceived benefits

Knowledge sharing is an essential component of effective knowledge management. However, evaluation apprehension, or the fear that your work may be critiqued, can inhibit knowledge sharing. Using the general framework of social exchange theory, we examined the effects of evaluation apprehension and perceived benefit of knowledge sharing ( such as enhanced reputation) on employees' knowledge sharing intentions in two contexts: interpersonal (i.e., by direct contact between two employees) and database (i.e., via repositories). Evaluation apprehension was negatively associated with knowledge sharing intentions in both contexts while perceived bene. it was only positively associated with knowledge sharing intentions in the database context. Moreover, compared to the interpersonal context, evaluation apprehension was higher and knowledge sharing lower in the database context. Finally, the negative effects of evaluation apprehension upon knowledge sharing intentions were worse when perceived benefits were low compared to when perceived benefits were high.

Foreign direct investment and local input linkages in Malaysia

This article examines variations in local input linkages in foreign transnational corporations in Malaysia. The extent to which transnational corporations foster such linkages, particularly in a developing host economy, has become an important issue for policy makers and others concerned with the long-term benefits associated with foreign direct investment. This article employs a unique data set, covering inward investors in the electrical and electronics industry, and analyzes in detail the determinants of variations in local input uses. The article develops a model of local input linkages, based on a transaction-cost framework using firm-specific factors, such as nationality of ownership, the age of the plant and its technology, and the extent to which firms employ locally recruited managers and engineers. In addition, the impacts of various policy measures on local input levels are discussed, and also the importance of the original motivation for investing in Malaysia. The article demonstrates that policy initiatives that target particular outcomes, such as stimulating exports or technology transfer, will result in a greater beneficial impact on the host country economy than more generic subsidies.

Intra-industry foreign direct investment, uneven development and globalization:the legacy of Stephen Hymer

This paper revisits the issue of intra-industry foreign direct investment (FDI). This issue was considered in Stephen Hymer's early work, but was not subsequently developed, and was largely ignored in the literature for some time. Using the example of the UK, this paper traces the patterns of intra-industry FDI, both across countries and industries, for both the manufacturing and service sectors. Despite the undoubted increase in the integration of goods and factor markets since the time of Hymer's writing, the analysis presented here shows that the pattern has changed little in the last 40 years. The paper then goes on to discuss the motives for intra-industry FDI, relating it to technology flows and factor cost differentials. Finally, we present some analysis relating intra-industry FDI to uneven development, both between developed and developing countries, and between regions of a developed country. It is clear that intra-industry FDI is still very much a developed country phenomenon, as Hymer suggested, with both developing countries and poorer regions of developed countries unlikely to reap any of the benefits. In this context, one-way and two-way FDI must be seen as different phenomena within the debate on globalisation. © The Author 2005. Published by Oxford University Press on behalf of the Cambridge Political Economy Society. All rights reserved.

Spillover effects of service failures in coalition loyalty programs:the buffering effect of special treatment benefits

Coalition loyalty programs are on the rise, yet few studies investigate the impact of service failures in such programs. Using data from a retail context, the authors show that a program partner deemed responsible for a service failure suffers negative customer responses. However, customers' perceptions of the benefits of the coalition loyalty program buffer these consequences. Perhaps most importantly, when customers perceive the program's special treatment benefits as low, direct and indirect spillover effects occur, such that a service failure by one program partner has a negative effect on customer loyalty toward the program itself. © 2013 New York University.

Spillovers from foreign direct investment in Central and Eastern Europe:an index for measuring a country’s potential to benefit from technology spillovers

In the paper, we construct a composite indicator to estimate the potential of four Central and Eastern European countries (the Czech Republic, Hungary, Poland and Slovakia) to benefit from productivity spillovers from foreign direct investment (FDI) in the manufacturing sector. Such transfers of technology are one of the main benefits of FDI for the host country, and should also be one of the main determinants of FDI incentives offered to investing multinationals by governments, but they are difficult to assess ex ante. For our composite index, we use six components to proxy the main channels and determinants of these spillovers. We have tried several weighting and aggregation methods, and we consider our results robust. According to the analysis of our results, between 2003 and 2007 all four countries were able to increase their potential to benefit from such spillovers, although there are large differences between them. The Czech Republic clearly has the most potential to benefit from productivity spillovers, while Poland has the least. The relative positions of Hungary and Slovakia depend to some extent on the exact weighting and aggregation method of the individual components of the index, but the differences are not large. These conclusions have important implications both the investment strategies of multinationals and government FDI policies.

Estimating direct and indirect effects of foreign direct investment on firm productivity in the presence of interactions between firms

We implement a method to estimate the direct effects of foreign-ownership on foreign firms' productivity and the indirect effects (or spillovers) from the presence of foreign-owned firms on other foreign and domestic firms' productivity in a unifying framework, taking interactions between firms into account. To do so, we relax a fundamental assumption made in empirical studies examining a direct causal effect of foreign ownership on firm productivity, namely that of no interactions between firms. Based on our approach, we are able to combine direct and indirect effects of foreign ownership and calculate the total effect of foreign firms on local productivity. Our results show that all these effects vary with the level of foreign presence within a cluster, an important finding for the academic literature and policy debate on the benefits of attracting foreign owned firms.

When is an image a health claim? A false-recollection method to detect implicit inferences about products' health benefits

Objective: Images on food and dietary supplement packaging might lead people to infer (appropriately or inappropriately) certain health benefits of those products. Research on this issue largely involves direct questions, which could (a) elicit inferences that would not be made unprompted, and (b) fail to capture inferences made implicitly. Using a novel memory-based method, in the present research, we explored whether packaging imagery elicits health inferences without prompting, and the extent to which these inferences are made implicitly. Method: In 3 experiments, participants saw fictional product packages accompanied by written claims. Some packages contained an image that implied a health-related function (e.g., a brain), and some contained no image. Participants studied these packages and claims, and subsequently their memory for seen and unseen claims were tested. Results: When a health image was featured on a package, participants often subsequently recognized health claims that—despite being implied by the image—were not truly presented. In Experiment 2, these recognition errors persisted despite an explicit warning against treating the images as informative. In Experiment 3, these findings were replicated in a large consumer sample from 5 European countries, and with a cued-recall test. Conclusion: These findings confirm that images can act as health claims, by leading people to infer health benefits without prompting. These inferences appear often to be implicit, and could therefore be highly pervasive. The data underscore the importance of regulating imagery on product packaging; memory-based methods represent innovative ways to measure how leading (or misleading) specific images can be. (PsycINFO Database Record (c) 2016 APA, all rights reserved)

Spillovers from Foreign Direct Investment in Central and Eastern Europe. An index for measuring a country’s potential to benefit from technology spillovers

In the paper, we construct a composite indicator to estimate the potential of four Central and Eastern European countries (the Czech Republic, Hungary, Poland and Slovakia) to benefit from productivity spillovers from foreign direct investment (FDI) in the manufacturing sector. Such transfers of technology are one of the main benefits of FDI for the host country, and should also be one of the main determinants of FDI incentives offered to investing multinationals by governments, but they are difficult to assess ex ante. For our composite index, we use six components to proxy the main channels and determinants of these spillovers. We have tried several weighting and aggregation methods, and we consider our results robust. According to the analysis of our results, between 2003 and 2007 all four countries were able to increase their potential to benefit from such spillovers, although there are large differences between them. The Czech Republic clearly has the most potential to benefit from productivity spillovers, while Poland has the least. The relative positions of Hungary and Slovakia depend to some extent on the exact weighting and aggregation method of the individual components of the index, but the differences are not large. These conclusions have important implication both the investment strategies of multinationals and government FDI policies.

Mercadeo farmacéutico de productos bajo prescripción: efectos de las estrategias Direct-to-Consumer-Advertising en el comportamiento de los consumidores y de prescripción de los médicos

Este proyecto se origina en el interés de analizar las estrategias actuales de promoción de productos farmacéuticos, en el marco del debate sobre el efecto persuasivo o informativo que la publicidad directa tiene sobre los consumidores. El objetivo es determinar el efecto de las estrategias de promoción directa para consumidores (Direct to Consumer Advertising [DTCA]) sobre el comportamiento de compra de pacientes y las prescripciones que formulan los médicos en el mercado de productos bajo receta en Estados Unidos. Para tal fin se propuso realizar una monografía que incluyera una revisión de literatura de carácter argumentativo, consultando información de nivel secundario en bases de datos científicas cuyos contenidos obedecieran a criterios metodológicos determinados por la naturaleza argumentativa del estudio. Adicionalmente, se analizó el debate sobre estos anuncios a la luz de dos estudios realizados a pacientes con cáncer de seno, próstata y colon, liderados por el Pennsylvania Cancer Registry con los productos biofarmacéuticos Avodart® y Flomax®. Finalmente, la investigación se fundamentó en la relación del mercado farmacéutico en Estados Unidos con cada uno de los agentes que interactúan en él; consumidores, médicos prescriptores y empresas farmacéuticas, así como el valor que estos comparten través de dichas interacciones. Se concluye que el comportamiento de compra de los consumidores está determinado por la naturaleza de la patología que padecen y el comportamiento de los profesionales que prescriben a sus pacientes se ve influenciado por los anuncios DTCA.