Step towards to improve the voluntary interruption of pregnancy by means of business intelligence

With the implementation of Information and Communication Technologies in the health sector, it became possible the existence of an electronic record of information for patients, enabling the storage and the availability of their information in databases. However, without the implementation of a Business Intelligence (BI) system, this information has no value. Thus, the major motivation of this paper is to create a decision support system that allows the transformation of information into knowledge, giving usability to the stored data. The particular case addressed in this chapter is the Centro Materno Infantil do Norte, in particular the Voluntary Interruption of Pregnancy unit. With the creation of a BI system for this module, it is possible to design an interoperable, pervasive and real-time platform to support the decision-making process of health professionals, based on cases that occurred. Furthermore, this platform enables the automation of the process for obtaining key performance indicators that are presented annually by this health institution. In this chapter, the BI system implemented in the VIP unity in CMIN, some of the KPIs evaluated as well as the benefits of this implementation are presented.

Laboratory detection of respiratory viruses by automated techniques.

Advances in clinical virology for detecting respiratory viruses have been focused on nucleic acids amplification techniques, which have converted in the reference method for the diagnosis of acute respiratory infections of viral aetiology. Improvements of current commercial molecular assays to reduce hands-on-time rely on two strategies, a stepwise automation (semi-automation) and the complete automation of the whole procedure. Contributions to the former strategy have been the use of automated nucleic acids extractors, multiplex PCR, real-time PCR and/or DNA arrays for detection of amplicons. Commercial fully-automated molecular systems are now available for the detection of respiratory viruses. Some of them could convert in point-of-care methods substituting antigen tests for detection of respiratory syncytial virus and influenza A and B viruses. This article describes laboratory methods for detection of respiratory viruses. A cost-effective and rational diagnostic algorithm is proposed, considering technical aspects of the available assays, infrastructure possibilities of each laboratory and clinic-epidemiologic factors of the infection.

Improvement of a testing apparatus for dynamometry: procedures for penetrometry and influence of strain rate to quantify the tensile strength of soil aggregates

Soil penetration resistance (PR) and the tensile strength of aggregates (TS) are commonly used to characterize the physical and structural conditions of agricultural soils. This study aimed to assess the functionality of a dynamometry apparatus by linear speed and position control automation of its mobile base to measure PR and TS. The proposed equipment was used for PR measurement in undisturbed samples of a clayey "Nitossolo Vermelho eutroférrico" (Kandiudalfic Eutrudox) under rubber trees sampled in two positions (within and between rows). These samples were also used to measure the volumetric soil water content and bulk density, and determine the soil resistance to penetration curve (SRPC). The TS was measured in a sandy loam "Latossolo Vermelho distrófico" (LVd) - Typic Haplustox - and in a very clayey "Nitossolo Vermelho distroférrico" (NVdf) - Typic Paleudalf - under different uses: LVd under "annual crops" and "native forest", NVdf under "annual crops" and "eucalyptus plantation" (> 30 years old). To measure TS, different strain rates were applied using two dynamometry testing devices: a reference machine (0.03 mm s-1), which has been widely used in other studies, and the proposed equipment (1.55 mm s-1). The determination coefficient values of the SRPC were high (R² > 0.9), regardless of the sampling position. Mean TS values in LVd and NVdf obtained with the proposed equipment did not differ (p > 0.05) from those of the reference testing apparatus, regardless of land use and soil type. Results indicate that PR and TS can be measured faster and accurately by the proposed procedure.

Metsäkonetuotannon hitsauksen robotisointi

Diplomityön tavoitteena oli selvittää robottihitsauksen antamat mahdollisuudet metsäkoneen runkorakenteiden hitsauksessa. Työn teoriaosassa selvitettiin kaarihitsauksen automatisointia ja sen tuomia etuja manuaaliseen hitsaukseen verrattuna. Työssä käytiin läpi kaarihitsauksen automatisointiinsoveltuvat robottivaihtoehdot, nykyaikaisen robotin hitsausvarustus, sekä kappaleenkäsittelylaitteet ja robotisoidun käytön turvallisuus. Hitsauksen robotisointiin soveltuvat eri hitsausmenetelmät ja perinteisten menetelmien tehostamiskeinot käytiin lävitse teoriaosuudessa. Hitsaustuotannon laatuun vaikuttavia asioitaja robottihitsattavan kappaleen suunnittelun huomioonottamista tuotesuunnittelussa tarkasteltiin myös työn teoriaosuudessa. Käytännön osiossa tarkasteltiin robotilla hitsattavat tuotteet ja tehtiin niille luoksepäästävyystarkasteluja. Laadittiin vaatimusluettelo tarvittavalle hitsausrobottilaitteistolle ja mallinnettiin erilaisia vaihtoehtoisia ratkaisuja hitsausrobottiympäristöstä kaarihitsauksen graafista simulointiohjelmaa käyttäen. Vertailtiin eri laitetoimittajilta saatuja 'avaimet käteen'- periaatteella tarjottuja ratkaisuja janiiden vastaavuutta laadittuun vaatimusluetteloon sekä eri laiteratkaisujen keskinäistä paremmuutta kyseiseen tapaukseen. Päätuotteille määritettiin hitsausajat ja selvitettiin laitteiston hitsauskapasiteettia. Investoinnin taloudellista kannattavuutta tarkasteltiin eri laskentamenetelmien avulla. Lopuksi arvioitiin hitsaustuotannon jatkokehitystarpeita tulevaisuutta ajatellen.

The Role of Third-Party Service Provider in B2B Integration

Sähköisen kaupankäynnin kasvun myötä, itsenäisten yritysten tietojärjestelmien integraation tarve on moninkertaistunut viime vuosien aikana. Yritykset ovat huomanneet, että tilaus-toimitusketjun automatisointiin tähtäävällä kokonaisvaltaisella integraatio-ratkaisulla on mahdollista päästä kattaviin kustannussäästöihin sekä tulojen kasvuun. Pääsääntöisesti yritykset kuitenkin etenevät hitaammin, integroimalla aluksi pienempiä liiketoiminnan tietojärjestelmien toimintoja. Positiivisten kokemusten perusteella yritykset ovat valmiitalaajentamaan sähköisen kaupankäynnin automatisointia myös muissa toiminnoissa. Tässä työssä keskitytään tarkastelemaan eri lähestymistapojayritystenvälisen integraation toteuttamiseen, sekä analysoimaan eri keinojen liiketoiminnallisia ja teknisiä vaikutuksia. Työ on tehty yhteistyössä UPM-KymmeneWood Oy:n kanssa, jonka tavoitteena oli saada perusteelliset tiedot yrityksenvälisestä integraatiosta ja syventää tietoja sekä integraatio-palveluita tarjoavien kolmansien osapuolten toimintatavoista että heidän tarjoamista palveluista ja niiden käyttökelpoisuudesta puutuoteteollisuudessa toimivassa yrityksessä. Käytännön osuudessa on tarkemmin esitelty integraatio-palveluita tarjoavien operaattoreiden kanssa käytyjen palaverien sekä heidän toimittamien materiaalien perusteella tehdyn tutkimustyön tuloksia, sisältäen yksityiskohtaiset kuvaukset yritystenvälisen integraation mahdollistavista palveluista.

ROBOTTIHITSAUKSEN KÄYTTÖÖNOTON EDELLYTYKSET ASIAKASOHJAUTUVASSA YKSITTÄIS- JA PIENSARJATUOTANNOSSA

Diplomityö koostuu teoria- ja tutkimusosasta. Teoriaosassa on käsitelty robottihitsaus-järjestelmän hankinnan edellytyksiä asiakasohjautuvan yksittäis- ja piensarjatuotannon lähtökohdista. Tarkastelun osa-alueita ovat asiakasohjautuva tuotanto, robottihitsaus yksittäis- ja piensarjatuotannossa, robottien ohjelmointimenetelmät, robottihitsauksen laatu ja laadunvarmistus, tehokkuus, tuottavuus, kannattavuus, robottihitsattavan tuotteen ja robottihitsausjärjestelmän suunnittelu, robottihitsausaseman turvallisuus sekä robotti-järjestelmän toteutus ja käyttöönotto. Teoriaosa on koottu siten, että sitä voidaan käyttää myös oppimateriaalina. Siinä esitetään myös sovellusesimerkki Imatran ammattikoululla toteutetusta robottihitsausaseman turvallisuusrakenneratkaisusta, jonka on suunnitellut ja toteuttanut diplomityön laatija. Diplomityön tutkimusosassa selvitetään kyselytutkimuksen avulla robottihitsauksen käyt-töönoton edellytyksiä asiakasohjautuvassa yksittäis- ja piensarjatuotannossa eteläkarjalai-sissa konepaja- ja metallialan yrityksissä. Tutkimukseen mukaan valituille 25 yritykselle ja yrityksistä valituille vastuuhenkilöille lähetettiin kirjallinen kyselytutkimus, johon vastaus saatiin 17 yritykseltä. Diplomityön tavoitteena oli selvittää robottihitsauksen käyttöönoton edellytyksiä. Tutkimuksella haettiin tietoja myös muusta yritysten suunnittelemasta hitsaus-tuotannon kehittämisestä kuten mekanisoinnista ja sen nykytilasta sekä muista mahdollisista hitsaukseen liittyvistä hankkeista. Tutkimustulosten perusteella on todettavissa, että Etelä-Karjalassa toimivista asiakas-ohjautuvista yksittäis- ja piensarjatuotantoa harjoittavista konepaja- ja metallialan yri-tyksistä löytyy yrityksiä, jotka ovat kiinnostuneita robottihitsausjärjestelmän hankinnasta, mutta saatujen tulosten perusteella voidaan todeta, että edellytyksiä siihen ei vielä näyttäisi olevan. Syiksi robottihitsausjärjestelmän hankinnan edellytysten puuttumiseen voidaan mainita muun muassa sopimaton tuoterakenne, liian yksilölliset tuotteet ja pienet sarjat, joilla ei ole toistuvuutta. Lisäksi yritykset toimivat pelkästään alihankintayrityksinä eikä niillä ole omaa tuotetta. Robottihitsausjärjestelmän hankinta voisi olla mahdollista niissä yrityksissä, jotka ovat verkottuneet, toimivat vakaavaraisesti ja joiden viennistä osa suuntautuu välillisesti tai välittömästi ulkomaille. Yhteistyöverkkojen voidaan olettaa parantavan robottihitsaus-järjestelmän hankinnan mahdollisuuksia. Tällöin kustannuksia voidaan jakaa usealle eri yritykselle ja siten voidaan tehostaa myös järjestelmän käyttöastetta sekä hankkia uusia asiakkaita. Kaksi yrityksistä on harkinnut joko oman tai leasing-robottihitsausjärjestelmän hankintaa. Ongelmina robottihitsausjärjestelmän yhteishankinnalle pidettiin esim. kenen tiloihin järjestelmä hankitaan, kuka huolehtii kunnossapidosta, miten palkat maksetaan työntekijöille ja miten käytössä oleva työaika jaetaan eri yrityksille. Diplomityön johtopäätökset ja suositukset osassa esitetään muutamia jatkotoimenpide-ehdotuksia siitä, kuinka tiettyjen yritysten osalta voitaisiin robottihitsauksen käyttöönottoa edistää. Tutkimuksen tuloksena saatua tietoa hyödynnetään muun muassa Lappeenrannan teknillisen yliopiston tutkimus- ja koulutushankkeissa sekä toisen asteen kone- ja metallitekniikan koulutuksen suunnittelussa ja toteutuksessa.

Visual Measurement and Modelling of Tool Wear in Rough Turning

Huolimatta korkeasta automaatioasteesta sorvausteollisuudessa, muutama keskeinen ongelma estää sorvauksen täydellisen automatisoinnin. Yksi näistä ongelmista on työkalun kuluminen. Tämä työ keskittyy toteuttamaan automaattisen järjestelmän kulumisen, erityisesti viistekulumisen, mittaukseen konenäön avulla. Kulumisen mittausjärjestelmä poistaa manuaalisen mittauksen tarpeen ja minimoi ajan, joka käytetään työkalun kulumisen mittaukseen. Mittauksen lisäksi tutkitaan kulumisen mallinnusta sekä ennustamista. Automaattinen mittausjärjestelmä sijoitettiin sorvin sisälle ja järjestelmä integroitiin onnistuneesti ulkopuolisten järjestelmien kanssa. Tehdyt kokeet osoittivat, että mittausjärjestelmä kykenee mittaamaan työkalun kulumisen järjestelmän oikeassa ympäristössä. Mittausjärjestelmä pystyy myös kestämään häiriöitä, jotka ovat konenäköjärjestelmille yleisiä. Työkalun kulumista mallinnusta tutkittiin useilla eri menetelmillä. Näihin kuuluivat muiden muassa neuroverkot ja tukivektoriregressio. Kokeet osoittivat, että tutkitut mallit pystyivät ennustamaan työkalun kulumisasteen käytetyn ajan perusteella. Parhaan tuloksen antoivat neuroverkot Bayesiläisellä regularisoinnilla.

Error Modeling and Accuracy Analysis of a Novel Mobile Hybrid Parallel Robot

Over the last decades, calibration techniques have been widely used to improve the accuracy of robots and machine tools since they only involve software modification instead of changing the design and manufacture of the hardware. Traditionally, there are four steps are required for a calibration, i.e. error modeling, measurement, parameter identification and compensation. The objective of this thesis is to propose a method for the kinematics analysis and error modeling of a newly developed hybrid redundant robot IWR (Intersector Welding Robot), which possesses ten degrees of freedom (DOF) where 6-DOF in parallel and additional 4-DOF in serial. In this article, the problem of kinematics modeling and error modeling of the proposed IWR robot are discussed. Based on the vector arithmetic method, the kinematics model and the sensitivity model of the end-effector subject to the structure parameters is derived and analyzed. The relations between the pose (position and orientation) accuracy and manufacturing tolerances, actuation errors, and connection errors are formulated. Computer simulation is performed to examine the validity and effectiveness of the proposed method.

Novel Robot Solutions for Carrying out Field Joint Welding and Machining in the Assembly of the Vacuum Vessel of ITER

It is necessary to use highly specialized robots in ITER (International Thermonuclear Experimental Reactor) both in the manufacturing and maintenance of the reactor due to a demanding environment. The sectors of the ITER vacuum vessel (VV) require more stringent tolerances than normally expected for the size of the structure involved. VV consists of nine sectors that are to be welded together. The vacuum vessel has a toroidal chamber structure. The task of the designed robot is to carry the welding apparatus along a path with a stringent tolerance during the assembly operation. In addition to the initial vacuum vessel assembly, after a limited running period, sectors need to be replaced for repair. Mechanisms with closed-loop kinematic chains are used in the design of robots in this work. One version is a purely parallel manipulator and another is a hybrid manipulator where the parallel and serial structures are combined. Traditional industrial robots that generally have the links actuated in series are inherently not very rigid and have poor dynamic performance in high speed and high dynamic loading conditions. Compared with open chain manipulators, parallel manipulators have high stiffness, high accuracy and a high force/torque capacity in a reduced workspace. Parallel manipulators have a mechanical architecture where all of the links are connected to the base and to the end-effector of the robot. The purpose of this thesis is to develop special parallel robots for the assembly, machining and repairing of the VV of the ITER. The process of the assembly and machining of the vacuum vessel needs a special robot. By studying the structure of the vacuum vessel, two novel parallel robots were designed and built; they have six and ten degrees of freedom driven by hydraulic cylinders and electrical servo motors. Kinematic models for the proposed robots were defined and two prototypes built. Experiments for machine cutting and laser welding with the 6-DOF robot were carried out. It was demonstrated that the parallel robots are capable of holding all necessary machining tools and welding end-effectors in all positions accurately and stably inside the vacuum vessel sector. The kinematic models appeared to be complex especially in the case of the 10-DOF robot because of its redundant structure. Multibody dynamics simulations were carried out, ensuring sufficient stiffness during the robot motion. The entire design and testing processes of the robots appeared to be complex tasks due to the high specialization of the manufacturing technology needed in the ITER reactor, while the results demonstrate the applicability of the proposed solutions quite well. The results offer not only devices but also a methodology for the assembly and repair of ITER by means of parallel robots.

Development of capacitive sensor for measuring soil water content

The irrigation management based on the monitoring of the soil water content allows for the minimization of the amount of water applied, making its use more efficient. Taking into account these aspects, in this work, a sensor for measuring the soil water content was developed to allow real time automation of irrigation systems. This way, problems affecting crop yielding such as irregularities in the time to turn on or turn off the pump, and excess or deficit of water can be solved. To develop the sensors were used stainless steel rods, resin, and insulating varnish. The sensors measuring circuit was based on a microcontroller, which gives its output signal in the digital format. The sensors were calibrated using soil of the type “Quartzarenic Neosoil”. A third order polynomial model was fitted to the experimental data between the values of water content corresponding to the field capacity and the wilting point to correlate the soil water content obtained by the oven standard method with those measured by the electronic circuit, with a coefficient of determination of 93.17%, and an accuracy in the measures of ±0.010 kg kg-1. Based on the results, it was concluded that the sensor and its implemented measuring circuit can be used in the automation process of irrigation systems.

Experimental validation of a 3-D vision-based measurement system applied to robot calibration

One of the problems that slows the development of off-line programming is the low static and dynamic positioning accuracy of robots. Robot calibration improves the positioning accuracy and can also be used as a diagnostic tool in robot production and maintenance. A large number of robot measurement systems are now available commercially. Yet, there is a dearth of systems that are portable, accurate and low cost. In this work a measurement system that can fill this gap in local calibration is presented. The measurement system consists of a single CCD camera mounted on the robot tool flange with a wide angle lens, and uses space resection models to measure the end-effector pose relative to a world coordinate system, considering radial distortions. Scale factors and image center are obtained with innovative techniques, making use of a multiview approach. The target plate consists of a grid of white dots impressed on a black photographic paper, and mounted on the sides of a 90-degree angle plate. Results show that the achieved average accuracy varies from 0.2mm to 0.4mm, at distances from the target from 600mm to 1000mm respectively, with different camera orientations.

Value of Information Logistics Integration in Digital Business Ecosystem

Digital business ecosystems (DBE) are becoming an increasingly popular concept for modelling and building distributed systems in heterogeneous, decentralized and open environments. Information- and communication technology (ICT) enabled business solutions have created an opportunity for automated business relations and transactions. The deployment of ICT in business-to-business (B2B) integration seeks to improve competitiveness by establishing real-time information and offering better information visibility to business ecosystem actors. The products, components and raw material flows in supply chains are traditionally studied in logistics research. In this study, we expand the research to cover the processes parallel to the service and information flows as information logistics integration. In this thesis, we show how better integration and automation of information flows enhance the speed of processes and, thus, provide cost savings and other benefits for organizations. Investments in DBE are intended to add value through business automation and are key decisions in building up information logistics integration. Business solutions that build on automation are important sources of value in networks that promote and support business relations and transactions. Value is created through improved productivity and effectiveness when new, more efficient collaboration methods are discovered and integrated into DBE. Organizations, business networks and collaborations, even with competitors, form DBE in which information logistics integration has a significant role as a value driver. However, traditional economic and computing theories do not focus on digital business ecosystems as a separate form of organization, and they do not provide conceptual frameworks that can be used to explore digital business ecosystems as value drivers—combined internal management and external coordination mechanisms for information logistics integration are not the current practice of a company’s strategic process. In this thesis, we have developed and tested a framework to explore the digital business ecosystems developed and a coordination model for digital business ecosystem integration; moreover, we have analysed the value of information logistics integration. The research is based on a case study and on mixed methods, in which we use the Delphi method and Internetbased tools for idea generation and development. We conducted many interviews with key experts, which we recoded, transcribed and coded to find success factors. Qualitative analyses were based on a Monte Carlo simulation, which sought cost savings, and Real Option Valuation, which sought an optimal investment program for the ecosystem level. This study provides valuable knowledge regarding information logistics integration by utilizing a suitable business process information model for collaboration. An information model is based on the business process scenarios and on detailed transactions for the mapping and automation of product, service and information flows. The research results illustrate the current cap of understanding information logistics integration in a digital business ecosystem. Based on success factors, we were able to illustrate how specific coordination mechanisms related to network management and orchestration could be designed. We also pointed out the potential of information logistics integration in value creation. With the help of global standardization experts, we utilized the design of the core information model for B2B integration. We built this quantitative analysis by using the Monte Carlo-based simulation model and the Real Option Value model. This research covers relevant new research disciplines, such as information logistics integration and digital business ecosystems, in which the current literature needs to be improved. This research was executed by high-level experts and managers responsible for global business network B2B integration. However, the research was dominated by one industry domain, and therefore a more comprehensive exploration should be undertaken to cover a larger population of business sectors. Based on this research, the new quantitative survey could provide new possibilities to examine information logistics integration in digital business ecosystems. The value activities indicate that further studies should continue, especially with regard to the collaboration issues on integration, focusing on a user-centric approach. We should better understand how real-time information supports customer value creation by imbedding the information into the lifetime value of products and services. The aim of this research was to build competitive advantage through B2B integration to support a real-time economy. For practitioners, this research created several tools and concepts to improve value activities, information logistics integration design and management and orchestration models. Based on the results, the companies were able to better understand the formulation of the digital business ecosystem and the importance of joint efforts in collaboration. However, the challenge of incorporating this new knowledge into strategic processes in a multi-stakeholder environment remains. This challenge has been noted, and new projects have been established in pursuit of a real-time economy.

The effect of an eight session skate treadmill and agility training program on the degree of separation in ice hockey players

The sport of ice hockey places multiple simultaneous demands on the physiological, mechanical, and cognitive abilities of individual players. The purpose of the study was to investigate the effect of an eight session degree of separation (DOS) training intervention on sport specific measures of skating, stick handling and puck control movements in competitive ice hockey players. All participants completed a battery of pre and pos t skill and DOS specific tests designed to evaluate DOS abilities: Ttest of agility, a modified Cunningham Faulkner test of anaerobic capacity performed on a skate treadmill and a DOS skate treadmill test. Statistically significant differences were found between groups on the post test scores, meaning that the training intervention had a specific effect on the post test scores of the experimental group (p~O.05). Results of this investigation suggested that a DOS specific training program has the potential to enhance the integration and automation of or sequencing and coordination of uncoordinated ice hockey movements.

A novel method for measuring lag times in division of individual bacterial cells using image analysis

A method is presented for determining the time to first division of individual bacterial cells growing on agar media. Bacteria were inoculated onto agar-coated slides and viewed by phase-contrast microscopy. Digital images of the growing bacteria were captured at intervals and the time to first division estimated by calculating the "box area ratio". This is the area of the smallest rectangle that can be drawn around an object, divided by the area of the object itself. The box area ratios of cells were found to increase suddenly during growth at a time that correlated with cell division as estimated by visual inspection of the digital images. This was caused by a change in the orientation of the two daughter cells that occurred when sufficient flexibility arose at their point of attachment. This method was used successfully to generate lag time distributions for populations of Escherichia coli, Listeria monocytogenes and Pseudomonas aeruginosa, but did not work with the coccoid organism Staphylococcus aureus. This method provides an objective measure of the time to first cell division, whilst automation of the data processing allows a large number of cells to be examined per experiment. (c) 2005 Elsevier B.V. All rights reserved.

Impedance mismatch: some differences between the way humans and robots control interaction forces

In over forty years of research robots have made very little progress still largely confined to industrial manufacture and cute toys, yet in the same period computing has followed Moores Law where the capacity double roughly every two years. So why is there no Moores Law for robots? Two areas stand out as worthy of research to speedup progress. The first is to get a greater understanding of how human and animal brains control movement, the second to build a new generation of robots that have greater haptic sense, that is a better ability to adapt to the environment as it is encountered. A remarkable property of the cognitive-motor system in humans and animals is that it is slow. Recognising an object may take 250 mS, a reaction time of 150 mS is considered fast. Yet despite this slow system we are well designed to allow contact with the world in a variety of ways. We can anticipate an encounter, use the change of force as a means of communication and ignore sensory cues when they are not relevant. A better understanding of these process has allowed us to build haptic interfaces to mimic the interaction. Emerging from this understanding are new ways to control the contact between robots, the user and the environment. Rehabilitation robotics has all the elements in the subject to not only enable and change the lives of people with disabilities, but also to facilitate revolution change in classic robotics.