1000 resultados para crop cycle
Resumo:
Embora a aveia preta apresente importantes características de interesse agronômico, os estudos direcionados ao conhecimento da planta visando aumentos de produtividade são ainda em pequeno número em condições brasileiras. Este trabalho teve por objetivo avaliar o desenvolvimento de plantas de aveia preta, cultivar Comum. O experimento foi instalado no mês de maio, em condições de campo, em Nitossolo Vermelho, em Botucatu, SP. O delineamento experimental empregado foi inteiramente casualizado, com três repetições. Os tratamentos constaram de épocas de coletas de plantas, as quais foram iniciadas aos 21 dias após a emergência das plântulas (DAE). O maior desenvolvimento vegetativo das plantas, considerando-se o número total de perfilhos e o número total de folhas, foi observado na fase de emissão da panícula, aos 84 DAE. A contribuição dos perfilhos primários foi maior que a dos perfilhos secundários, tanto nos componentes vegetativos como nos componentes relacionados à produção de sementes.
Resumo:
The water restriction can damage the performance of crops, especially in the flowering period. Thus, the aim of this research was to evaluate the response of genotypes of wheat submitted to water deficit in the beginning of flowering. The experiment was conducted in greenhouse, in a completely randomized design, in factorial scheme 3 x 2, with five replications. The factors studied were: three wheat cultivars (Coodetec (CD) 105, 108 and 111) and 2 irrigation managements (with and without imposition of water deficit). During the period of water deficit imposition, gravimetric soil moisture and the relative content of water in leaf were evaluated, while at the moment of rehydration the biometric variables were determined. At the end of the crop cycle the components of production were evaluated. Reduction was found in the gravimetric soil moisture, in the relative levels of water and in all biometric variables, in function of the water deficit. The grain production showed difference only among the water regimes, in which the cultivar CD 111 is more efficient in the maintenance of the productive potential in conditions of water deficit, through the quick recovery in the relative content of water in leaves.
Resumo:
In the experimental area of the Department of Environmental Sciences (21.85° S; 48.43° W; 786 m), in the School of Agronomical Sciences, UNESP, Botucatu, SP, an experiment was carried out using peanut (Arachis hypogaea L), cv. IAC-TATU-ST, to quantify the crop daily water requirements. During the peanut crop cycle, the environmental variables, such as rainfall, air temperature, air relative humidity, soil matric potential, soil heat flux and radiation balance, have been registered continually. These measurements were used to calculate the daily crop evapotranspiration, by the Bowen ratio method. The water replacement required by the peanut crop was done the dripping irrigation system, oriented by a dynamic agrometeorological model that computes the entrance and exit of water in the soil. During the peanut crop cycle, 9.0 mm of water was used from sowing to emergence; 67.0 mm of water, in the growth stage; 166.0 mm, in the flowering stage; 124.0 mm in the final stage and 46.0 mm from physiological maturity to harvest. Oot of 412.0 mm of the total consumption, 246.0 mm of water was supplied by irrigation and 166.0 mm by the rain. The grain yield was 3.15 t ha-1 for 15% of humidity, and the water use efficiency was 0.764 kg m-3.
Resumo:
The aim of this research was to evaluate the white mold severity (Sclerotinia sclerotiorum (Lib.) of Bary), bean production components and yield (Phaseolus vulgaris L.), variety Perola, according to the application of procimidone fungicide (Sialex 500), through fungigation (center pivot) and automotive sprayer (Uniport). The study was carried under field production commercial conditions, in Primavera do Leste - MT - Brazil. The experiment consisted of 5 treatments (with 4 repetitions of 4 ha each), all with two procimidone applications (1.2 kg ha-1 each application, same as, 0.6 kg a.i. per hectare) to the 42 and 52 days after seeding. The water depths of 5.5 and 11.0 mm were tested in the application through central pivot (this had your checked uniformity), providing volumes of 55.000 and 110.000 L ha-1, respectively, and the volumes of 120 and 200 L ha-1 in the automotive sprayer. The severity of disease was evaluated by the percentage of the area affected by plant damage using diagramatic grade scale of white mold severity, as described by Azevedo (1998). The values were used to calculate the area under the disease progress curve (AUDPC). They were also analyzed, the number of the fungus apothecia during the crop cycle and the residual sclerotias weight in harvest. On this occasion, it was also evaluated the crop yield parameters: number of plants per plot (final stand), pods per plant, grains per pod, medium weight of 200 grains and productivity of grains. The AUDPC values, apothecia to 42, 49 and 56 days after seeding, sclerotias in 2 soil kg and the crop productivity parameters were submitted to the variance analysis and Tukey Test at 0.05 of probability. This test was also applied in the comparison among the different fungicide application methods, independent of spray volumes in each one. The statistical processing was accomplished by STAT program. The results showed that weren't differences among application techniques studied in relation to productivity parameters, however, best white mold control, smaller apothecia number to 49 and 56 days after seeding and smaller weight of residual sclerotias in the harvest were obtained with the fungigation, independently of the spray volume used.
Resumo:
The present work aimed at evaluating the effects of cattle manure fertilization on the growth and yield of fig trees. The cultivar 'Roxo de Valinhos' was used. One-, two-, three-and four-year-old trees were treated with cattle manure containing 0, 25, 50, 75, 100, 125 and 150% of the recommended nitrogen level per plant. The experiment was carried out using randomized blocks with 7 treatments, 5 replicates and 5 plants per experimental plot. The evaluated characteristics were: plant height, stem diameter, secondary branch length and diameter, yield per plant (kg plant-1), besides some quality characteristics of fruits such as pH, titratable acidity, soluble solids and texture. Manure application enhanced plant growth and fruit production. Significant differences were observed only for soluble solids content, pH and texture, which varied according to the crop cycle. After four crop cycles (2002/03, 2003/04, 2004/05 and 2005/06), the best results (about 5.0 kg of fruits per plant) were obtained with 100% of the recommended nitrogen dose, which corresponded to 14.3 kg of cattle manure per plant, in the last crop cycle (2005/2006).
Resumo:
This research work aimed to determine the total period of interference of weeds prevention of lettuce cultivar Solaris. The experiment was conducted in Universidade Estadual de Londrina, in the period of autumn/ winter of 2008. The lettuce crop remained free from weed interference from emergence up to 0, 10, 20, 30, 40, 50 e 60 days. The experiment was arranged in a randomized block design with four replications. The weed community was composed by Bidens pilosa, Amaranthus hybridus, Oxalis corniculata, Euphorbia heterophylla, Spinacia oleracea, Commelina benghalensis e Lepidium virginicum. It was determined dry and fresh matter of weeds, and number of lettuce leaves. Assuming a tolerance of 5% for crop production decrease, it was verified that the total period of interference prevention (TPIP) occurred up to 21 days after transplanting. Weed interference throughout the crop cycle reduced 25% of its yield.
Resumo:
The objective of this work was to study spatial variability of some chemical soil attributes and lettuce production (total shoot fresh matter mass - MF; commercial shoot fresh matter mass - MFC; commercial shoot dry matter mass - MCS; and head commercial diameter - DCC) offering subsidies to the protected environment mapping in nutrients management areas in lettuce culture aiming for a higher productivity with application of fertilizers. The experiment was conducted in a protective environment (greenhouse) with lettuce irrigated by drip irrigation and sampling grid with 152 points. The special dependence analysis, determined by the variogram, was obtained with the aid of the GS+ Program. Considering the need for crop nutrients through the map obtained for element P (phosphorus) it was possible to establish two distinct areas for the application of this element in plantation fertilization. Through the lettuce yield maps obtained with MFC and DCC attributes was difficult to establish distinct areas for its management with data observed in only one crop cycle. Krigagem has proved useful for mapping the attributes studied.
Resumo:
The tomato cultivation in the greenhouse has been expanded in the last years, mainly, in the South and Southeast regions of Brazil, whose purpose is to improve the productivity and the quality of the agricultural products, offering regularity in the production. The present study aimed to determine, along the crop cycle, the relationship between the leaf area index and the productivity, and at the end of the cycle, the components of production of the tomato in the greenhouse. The models were generated through polynomial equations of 1st and 2nd order, having as independent variable the number of days after the transplanting. It was verified that it is possible to determine, in the greenhouse, through mathematical models, the leaf area index of the tomato crop considering the days after the transplanting. Basing on values of leaf area index, the productivity of the crop and the period of the maximum productivity can be determined, aiding the farmers to determine the best sowing and transplanting time of the tomato crop.
Resumo:
In order to quantify the growth, accumulation and exportation of macronutrients by carrot 'Forto', and obtain equations that best represent them, it was conducted an experiment in the São Gotardo (MG), from May to September 2004. Samples were taken at 40, 50, 60, 70, 80, 90, 100, 110 and 120 days after sowing (DAS) to determine dry matter and accumulation of macronutrients in leaves and roots. At 40 DAS, five days after thinning, the plants had 0.18 g and 0.04 g in dry leaves (LDM) and of roots (RDM), respectively. From then, until 88 DAS, the partitioning of photoassimilates and accumulation of matter in the shoots were more pronounced. The RDM was low until 80 DAS, which corresponded to two thirds of the crop cycle, from when the amount of material allocated in this part of the plant had strong growth, surpassing, at 88 DAS, the amount of LDM. The nutrient accumulation was small in the first 60 DAS, coinciding with the period of lower dry matter accumulation. The order of decreasing macronutrient accumulation by the crop were: K > N > Ca > P > S > Mg, in the amounts of 906.7, 438, 155.46, 87.4, 58 and 37.63 mg plant-1, respectively. The root participated with 60.5% of the accumulation of N, 86.1% of P, 58% of K, 25.5% of Ca, 55.6% of Mg and 65.5% of S. Considering a population of 590,000 plants per hectare, the total quantity of nutrients by the crop of carrots was 258.3, 51.6, 534.8, 91.7, 22.2 and 34.2 kg N ha-1, P, K, Ca, Mg and S, respectively.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Pós-graduação em Agronomia (Agricultura) - FCA
Resumo:
Pós-graduação em Agronomia (Ciência do Solo) - FCAV
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)