a-b axis-oriented lanthanum doped Bi4Ti3O12 thin films grown on a TiO2 buffer layer

a-b axis-oriented, lanthanum doped Bi4Ti3O12 (BLT) thin films with a TiO2 rutile buffer layer deposited on Pt/Ti/SiO2/Si substrates were grown by the soft chemical method. Butterfly dielectric behavior has been achieved and can be ascribed to the ferroelectric domain switching. The remanent polarization and the coercive voltage for the film deposited on TiO2 buffer layer were 22.2 mu C/cm(2) and 1.8 V, respectively. Random-oriented BLT films showed a reduction in switching polarization when compared to the a-b axis-oriented films. Due to the excellent physical properties, these films are a promising candidate for use in lead-free applications in ferroelectric devices. (c) 2006 American Institute of Physics.

Changes on iron electrode surface during hydrogen permeation in borate buffer solution

Hydrogen interaction with oxide films grown on iron electrodes at open circuit potential (E-oc) and in the passive region (+0.30 V-ECS) was studied by chronopotentiometry, chronoamperometry and electrochemical impedance spectroscopy techniques. The results were obtained in deaerated 0.3 mol L-1 H3BO3 + 0.075 mol L-1 Na2B4O7 (BB, pH 8.4) solution before, during and after hydrogen permeation. The iron oxide film modification was also investigated by means of in situ X-ray absorption near-edge spectroscopy (XANES) and scanning electrochemical microscopy (SECM) before and during hydrogen permeation. The main conclusion was that the passive film is reduced during the hydrogen diffusion. The hydrogen permeation stabilizes the iron surface at a potential close to the thermodynamic water stability line where hydrogen evolution can occur. The stationary condition required for the determination of the permeation parameters cannot be easily attained on iron surface during hydrogen permeation. Moreover, additional attention must be paid when obtaining the transport parameters using the classical permeation cell. (c) 2007 Elsevier Ltd. All rights reserved.

Nitrous oxide production and potential denitrification in soils from riparian buffer strips: Influence of earthworms and plant litter

Vegetated riparian buffer strips have been established in Southern Quebec (Canada) in order to intercept nutrients such as nitrate (NO(3)(-)) and protect water quality near agricultural fields. Buffer strips may also favour denitrification through a combination of high soil moisture, NO(3)(-) and carbon supply, which could lead to the production of nitrous oxide (N(2)O), a greenhouse gas. Denitrification could be further amplified by the presence of earthworms, or by plant species that promote earthworm and bacterial activity in soils. Soils from four farms, comprising maize fields and adjacent buffer strips, were sampled in the fall of 2008. A total of six earthworm species were found, but average earthworm biomass did not differ between buffer strips and maize agroecoecosystems. Nitrate concentrations and net nitrification rates were higher in the maize fields than in the buffer strips: there was no difference in N(2)O production in soils collected from the two sampling locations. Potential denitrification, measured by acetylene inhibition, varied by two orders of magnitude, depending on experimental conditions: when amended with H(2)O or with H(2)O + NO3-, potential denitrification was higher (P < 0.05) in soils from buffer strips than from maize fields. Potential denitrification was highest in soils amended with H(2)O+glucose, or with H(2)O+ NO(3)(-) + glucose. Using microcosms, we tested the effect of litter-soil mixtures on earthworm growth, and the effect of earthworm-litter-soil mixtures on potential denitrification. Based on four categories of chemical assays, litters of woody species (oak, apple, Rhododendron) were generally of lower nutritional quality than litter from agronomic species (alfalfa, switchgrass, corn stover). Alfalfa litter had the most positive effect, whereas apple litter had the most negative effect, on earthworm growth. Potential denitrification was 2-4 times higher in earthworm-litter-soil mixtures than in plain soil. Litter treatments that included corn stover had lower potential denitrification than those that included alfalfa or switchgrass, whereas litter treatments that included oak had lower potential denitrification than those that included apple or Rhododendron. Results suggest that potential N(2)O emissions may be higher in riparian buffer strips than in adjacent maize fields, that N(2)O emissions in buffer strips may be amplified by comminuting earthworms, and that plant litters that reduce earthworm growth may not be best at mitigating N(2)O emissions. (c) 2010 Elsevier B.V. All rights reserved.

On the electrochemical behavior of Cu-16%Zn-6.5%Al alloy containing the β'-phase (martensite) in borate buffer

In this work, the electrochemical behavior of Cu-16(wt.%)Zn-6.5(wt.%)Al alloy containing the β'-phase (martensite) was studied in borate buffer solution (pH 8.4) by means of open-circuit potential (EOC), electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The alloy EOC was -0.29 V vs. Hg/HgO/OH-, similar to that of pure copper in this medium, indicating that the processes which occur on the alloy surface are mainly governed by copper. EIS response was related to the dielectric and transmission properties of the complex oxide layer. The CVs showed peaks concerning the redox reactions for copper and zinc. These peaks were assigned to the formation and reduction of copper and zinc species. Furthermore, they showed that the copper oxidation was suppressed by the presence of zinc and aluminum in the alloy composition. The copper and zinc oxidation to form complex oxide layers and the reduction of the different metallic oxides generated in the anodic potential scan suggest that a solid state reaction could determine the metallic oxide formation. © 2013 Elsevier Ltd. All rights reserved.

Ferroelectric and structural instability of (Pb,Ca)TiO3 thin films prepared in an oxygen atmosphere and deposited on LSCO thin films which act as a buffer layer

Structural, microstructural and ferroelectric properties of Pb0.90Ca0.10TiO3 (PCT10) thin films deposited using La0.50Sr0.50CoO3 (LSCO) thin films which serve only as a buffer layer were compared with properties of the thin films grown using a platinum-coated silicon substrate. LSCO and PCT10 thin films were grown using the chemical solution deposition method and heat-treated in an oxygen atmosphere at 700 °C and 650 °C in a tube oven, respectively. X-ray diffraction (XRD) and Raman spectroscopy results showed that PCT10 thin films deposited directly on a platinum-coated silicon substrate exhibit a strong tetragonal character while thin films with the LSCO buffer layer displayed a smaller tetragonal character. Surface morphology observations by atomic force microscopy (AFM) revealed that PCT10 thin films with a LSCO buffer layer had a smoother surface and smaller grain size compared with thin films grown on a platinum-coated silicon substrate. Additionally, the capacitance versus voltage curves and hysteresis loop measurement indicated that the degree of polarization decreased for PCT10 thin films on a LSCO buffer layer compared with PCT10 thin films deposited directly on a platinum-coated silicon substrate. This phenomenon can be described as the smaller shift off-center of Ti atoms along the c-direction 〈001〉 inside the TiO6 octahedron unit due to the reduction of lattice parameters. Remnant polarization (P r ) values are about 30 μC/cm2 and 12 μC/cm2 for PCT10/Pt and PCT10/LSCO thin films, respectively. Results showed that the LSCO buffer layer strongly influenced the structural, microstructural and ferroelectric properties of PCT10 thin films. © 2013 Elsevier Ltd and Techna Group S.r.l.

Anurans from the Serra da Bocaina National Park and surrounding buffer area, southeastern Brazil

Here, we review the species of anuran amphibian from the Serra da Bocaina National Park and its buffer area, in the Atlantic Forest of southeastern Brazil, comparing the data from a recent survey with museum records. We surveyed adult and larval anurans in ponds, marshes, and streams discontinuously from May 2008 to January 2011. In total, 63 anuran species were previously known to occur at the Park and its surrounding buffer area. In our survey, we recorded 46 species, of which five represented new records, and 22 appeared only in the historical list. Seven topotypic populations were not found in the present study. We suggest that conservation strategies for anurans in the Serra da Bocaina should also consider the surrounding areas that are subjected to anthropogenic pressure, due to the high diversity recorded, high altitudinal variation in species distribution, and various vegetation formations.

Avaliação do Sistema Simplified Drum-Buffer-Rope em ambientes de produção para estoque

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Minimun Riparian Buffer Width for Maintaining Water Quality and Habitat Along Stevens Creek

ABSTRACT Riparian buffer zones are important sites of biodiversity, sediment trapping, pollutant removal, and hydrologic regulation that have significant implications for both people and wildlife. Urbanization’s influence on and need for adequate water quality increases the need for careful planning in regards to riparian areas. Wildlife are key components in the ecosystem functions of riparian zones and require consideration in peri-urban planning as well. This study reviews relevant literature to determine the recommended minimum riparian buffer width for maintaining water quality and habitat along Stevens Creek in Lincoln, Nebraska. Only sources that listed a specific purpose related to water quality and habitat for their buffer width recommendations were considered. The study found that the baseline buffer width recommended for Stevens Creek that would be adequate for both water quality maintenance and basic habitat is 50 ft (15 m) per side. This number may be modified based on other factors such as slope, soil particle size, adjacent land use, the presence of certain wildlife communities, stream size, and stream order.

TCP a ritrasmissione asimmetrica anticipata su Access Point WiFi

La perdita di pacchetti durante una trasmissione su una rete Wireless influisce in maniera fondamentale sulla qualità del collegamento tra due End-System. Lo scopo del progetto è quello di implementare una tecnica di ritrasmissione asimmetrica anticipata dei pacchetti perduti, in modo da minimizzare i tempi di recupero dati e migliorare la qualità della comunicazione. Partendo da uno studio su determinati tipi di ritrasmissione, in particolare quelli implementati dal progetto ABPS, Always Best Packet Switching, si è maturata l'idea che un tipo di ritrasmissione particolarmente utile potrebbe avvenire a livello Access Point: nel caso in cui la perdita di pacchetti avvenga tra l'AP e il nodo mobile che vi è collegato via IEEE802.11, invece che attendere la ritrasmissione TCP e Effettuata dall'End-System sorgente è lo stesso Access Point che e effettua una ritrasmissione verso il nodo mobile per permettere un veloce recupero dei dati perduti. Tale funzionalità stata quindi concettualmente divisa in due parti, la prima si riferisce all'applicazione che si occupa della bufferizzazione di pacchetti che attraversano l'AP e della loro copia in memoria per poi ritrasmetterli in caso di segnalazione di mancata acquisizione, la seconda riguardante la modifica al kernel che permette la segnalazione anticipata dell'errore. E' già stata sviluppata un'applicazione che prevede una ritrasmissione anticipata da parte dell'Access Point Wifi, cioè una ritrasmissione prima che la notifica di avvenuta perdita raggiunga l'end-point sorgente e appoggiata su un meccanismo di simulazione di Error Detection. Inoltre è stata anche realizzata la ritrasmissione asincrona e anticipata del TCP. Questo documento tratta della realizzazione di una nuova applicazione che fornisca una più effciente versione del buffer di pacchetti e utilizzi il meccanismo di una ritrasmissione asimmetrica e anticipata del TCP, cioè attivare la ritrasmissione su richiesta del TCP tramite notifiche di validità del campo Acknowledgement.

Analisi e stima dell'errore ionosferico di un segnale GPS a singola e doppia frequenza

Analisi e stima dell'errore ionosferico per gli utenti che dispongono sia di un ricevitore a singola che a doppia frequenza e confronto conclusivo fra i due tipi di dati ricavati. Le stime sono state implementate in ambiente Matlab.

Errore e apprendimento: L'italiano insegnato ai bambini non madrelingua in una scuola primaria di Forlì.

Questo elaborato si propone di dare un'idea generale del concetto di interlingua da un punto di vista teorico e pratico. Nel primo capitolo spiegherò il concetto di interlingua, ne ripercorro brevemente la storia e ne illustro le fasi di sviluppo nei bambini. Il secondo capitolo è incentrato sugli effetti che l'idea di interlingua ha sulla didattica mirata a sostenere il bambino nel suo percorso di apprendimento. Il terzo capitolo è dedicato alle rilevazioni fatte nel VII circolo di Forlì.

Fusione di impronte: analisi dei problemi di sicurezza e possibili contromisure

In questa tesi si esamineranno alcune possibili vulnerabilità dei sistemi di riconoscimento di impronte digitali e si tenterà di migliorare la loro sicurezza nei confronti di una tipologia specifica di attacco che utilizza impronte digitali "artificiali" per permettere ad un criminale di utilizzare il documento di un complice. È stata infatti recentemente dimostrata la possibilità di inserire in un documento elettronico caratteristiche biometriche che lo rendono utilizzabile da due diverse persone. Questa problematica di sicurezza è alla base dell’attacco che verrà analizzato in questa tesi e per il quale si cercheranno contromisure efficaci.