Research into crown rot and wilt diseases of strawberries in Queensland

Plant losses due to fungal diseases in strawberry (Fragaria × ananassa Duch.) can potentially cause total loss of production. Three fungal pathogens, Fusarium oxysporum f. sp. fragariae, Colletotrichum gloeosporioides and Macrophomina phaseolina, cause similar crown rot and wilt symptoms in strawberries in Queensland. Since the withdrawal of methyl bromide in 2005, no effective chemical control of any of the three pathogens has been available. This study aims at identifying sources of plant genetic resistance that can be used in the breeding program to develop resistant cultivars for use as part of an integrated disease management plan in commercial strawberry production. Results from glasshouse pathogenicity and screening trials on the three pathogens showed that when breeding for resistance against a pathogen, resistance to other pathogens also needs to be considered, e.g., cultivar 'Festival' is resistant to F. oxysporum f. sp. fragariae, but is highly susceptible to C. gloeosporioides. The cultivars 'Earlisweet', 'Kabarla' and 'Phenomenal', two seedling clones and four DAFF breeding lines were resistant to C. gloeosporioides. Cultivar 'Suncoast Delight' showed the most promising level of resistance to M. phaseolina. These cultivars, breeding lines and seedling selections have been made available for incorporation into the crossing program to support the Queensland strawberry breeding program.

Analysis of high yielding maize production - A study based on a commercial crop

This paper reports on the use of APSIM - Maize for retrospective analysis of performance of a high input, high yielding maize crop and analysis of predicted performance of maize grown with high inputs over the long-term (>100 years) for specified scenarios of environmental conditions (temperature and radiation) and agronomic inputs (sowing date, plant population, nitrogen fertiliser and irrigation) at Boort, Victoria, Australia. It uses a high yielding (17 400 kg/ha dry grain, 20 500 kg/ha at 15% water) commercial crop grown in 2004-05 as the basis of the study. Yield for the agronomic and environmental conditions of 2004-05 was predicted accurately, giving confidence that the model could be used for the detailed analyses undertaken. The analysis showed that the yield achieved was close to that possible with the conditions and agronomic inputs of 2004-05. Sowing dates during 21 September to 26 October had little effect on predicted yield, except when combined with reduced temperature. Single year and long-term analyses concluded that a higher plant population (11 plants/m2) is needed to optimise yield, but that slightly lower N and irrigation inputs are appropriate for the plant population used commercially (8.4 plants/m2). Also, compared with changes in agronomic inputs increases in temperature and/or radiation had relatively minor effects, except that reduced temperature reduces predicted yield substantially. This study provides an approach for the use of models for both retrospective analysis of crop performance and assessment of long-term variability of crop yield under a wide range of agronomic and environmental conditions.

Effect of micro-propagation on the health status of strawberry planting material for commercial production of strawberry runners for Queensland

Plant tissue culture has been used for a number of years to produce micropropagated strawberry plants for planting into runner growing beds in the Stanthorpe (Queensland) and Bothwell (Tasmania) regions. This process has allowed the rapid release of new cultivars from the LAWS (Late Autumn, Winter, Spring) breeding program into the current runner production system. Micro-propagation in vitro allows plants to be produced during the autumn and winter months, when mother plants would normally be in a fruit production phase in the field in Queensland. The plants produced are of a high health status when they are planted. The subsequent arrival and build up of various diseases in the runner fields are closely monitored. Using tissue culture for the first generation reduces the time the plants spend in the field by twelve months, reducing disease incidence. To date, any disease outbreak has been successfully managed using early detection and rapid response methods.

Small scale commercial production of tilapia fingerlings in floating bamboo net-hapas

The inadequate supply of tilapia seed is considered as one of the major present constraints to the development of the culture industry in Nigeria. The floating bamboo net-hapa hatchery/nursery system was observed to be very efficient in the mass production of tilapia (Oreochromis niloticus) fry and fingerlings at Kainji Lake Research Institute. This system was therefore, recommended for small-scale (artisanal) commercial operators consisting of fishermen families in order to increase their productivity and hasten development of rural communities. The economic analysis of this system showed that loan obtained for the recommended scale of operation can be amortized within 2 years of the project. It was emphasized that the operational and managerial skills of the fish farm operators account largely to the production cost and profitability of the enterprise

Small-scale commercial production of tilapia fry and fingerlings in concrete raceways

This paper discusses the investment prospects in Tilapia fry and fingerling production in raceways created from the concrete drainage channel of a reservoir or pond of an existing fish farm in Nigeria. With an initial capital of 1,300 and an annual operating cost of 310 spent on procurement of fish feed and brood stock for a 10 m super(2) raceway per se, a net profit of 4,100 and 5,090 would be realized from Sarotherodon galilaeus in the first year and subsequent years of production respectively, assuming that the fingerling production rate has been maintained through the production period. It is concluded that the application of this approach of optimizing the use of available resources in the fish farm for the productive breeding of Tilapia fry and fingerlings will apart from alleviating the problem of scarcity of stocking materials in the country, increase the profit margin accruing to the fish farmer

Commercial production of Clarias fry and fingerlings in indoor and outdoor concrete tank systems

Induced breeding technique by hypophysation is being applied at the Kainji Lake Research Institute Fisheries Division Hatchery complex in New Bussa, Nigeria, for the production of Clarias fry and fingerlings in indoor and outdoor concrete tank systems. The hatchlings are fed on livefood (zooplankton) and artificial feed. Source of zooplankton is from cultured stock which is maintained throughout the breeding season by fertilization. Production values show that an average of over 4,000 hatchlings (larvae) can be produced by a female breeder (over-700g wt) and percentage survival after two months ranges between 70 to 75%. With the proposed modification and expansion project, an estimated production of over 0.5 million fingerlings per breeding season is projected

The potentials for commercial production of fish feeds in Nigeria

Studies in fish feed technology revealed that there is a potential for big time investment into fish feed production and marketing in view of the growing awareness of fish farming in Nigeria. Intensification of aquaculture is one of the primary methods of food (finfish) production which requires technical knowledge and expertise in the formulation and manufacture of adequate feeds for the cultured species. Studies also revealed that all sort of food items were used by fish farmers ranging from animal dung, groundnut cake etc, to culture fish to table size because of non-availability of rightly prepared feeds. Inadequate knowledge of detailed requirements of tropical cultured species was found to pose a hindrance to formulation despite the fact that a lot has been accumulated in terms of biochemical and nutritive values of food sources in Nigeria. The investigation further revealed the challenges posed to researchers in aquaculture, fish nutritionists and fisheries biologists among others to elucidate the complete requirements of local fish species in terms of their protein, lipid and carbohydrate requirements such that their patents could be made available to companies like PFIZER, IBRU etc, and individuals alike to make commercialization of fish feeds a reality

Commercial production of natural freshwater fish food

A review is made of some of the methods that can be used for mass cultivation of natural fish food and the types of organisms that are cultured, which include various algae and zooplankton. Some examples are given of successful case histories in the mass cultivation of natural fish food in order to stimulate the interest of Nigerian scientists on research activities of live fish food for use by fish farmers in the country

Commercial production of fish meal from fish waste

The importance of fish meal production as a means of reducing fish waste currently being experienced in the fisheries subsector is discussed. Cost estimate for Nigeria establishing a fish meal manufacturing plant and suggestions on rational execution of the project are presented. If properly located and well managed, the project will serve to convert fish waste to cash in the industrial fishery

A design for commercial production of catfish (Clarias lazera) in multiple cages

The findings are given of a preliminary study on the appropriate economical feeding rate which would enhance the growth of catfish (Clarias lazera) in cages in Lyi-ojoo Lake, Nike, Nigeria, providing also the details of the design of a practical floating platform that can be used for the culture of fish in multiple cages

Commercial production and marketing of Nile tilapia (Oreochromis niloticus) fry in Chonburi and Chachoengsao provinces, Thailand

Nile tilapia (Oreochromis niloticus) fry production and marketing in the provinces of Chonburi and Chachoengsao, Thailand are discussed, covering historical background, production methodology, transfer of technology to other region, and future trends.

A model for assessing the likelihood of self-sustaining populations resulting from commercial production of triploid Suminoe oysters (Crassostrea ariakensis) in Chesapeake Bay

Culture of a non-native species, such as the Suminoe oyster (Crassostrea ariakensis), could offset the harvest of the declining native eastern oyster (Crassostrea virginica) fishery in Chesapeake Bay. Because of possible ecological impacts from introducing a fertile non-native species, introduction of sterile triploid oysters has been proposed. However, recent data show that a small percentage of triploid individuals progressively revert toward diploidy, introducing the possibility that Suminoe oysters might establish self-sustaining populations. To assess the risk of Suminoe oyster populations becoming established in Chesapeake Bay, a demographic population model was developed. Parameters modeled were salinity, stocking density, reversion rate, reproductive potential, natural and harvest-induced mortality, growth rates, and effects of various management strategies, including harvest strategies. The probability of a Suminoe oyster population becoming self-sustaining decreased in the model when oysters are grown at low salinity sites, certainty of harvest is high, mini-mum shell length-at-harvest is small, and stocking density is low. From the results of the model, we suggest adopting the proposed management strategies shown by the model to decrease the probability of a Suminoe oyster population becoming self-sustaining. Policy makers and fishery managers can use the model to predict potential outcomes of policy decisions, supporting the ability to make science-based policy decisions about the proposed introduction of triploid Suminoe oysters into the Chesapeake Bay.

Recent advances in the hatchery production of seed of some commercial bivalves in India

The Central Marine Fisheries Research Institute has established a shellfish hatchery laboratory at its Tuticorin Research Centre with the objective of developing appropriate technology for the production of seed of commercial bivalves. A viable technology was developed for the mass production of the seed of Pinctada fucata, P. margaretifera, Crassostrea madrasensis, Perna indica, P. viridis, Anadara granosa and Meretrix meretrix. The hatchery facility and the technology, comprising brood stock conditioning, induced spawning, larval rearing and seed production are described. In the light of these developments the future outlook is appraised.