Biocompatibility of resin-based dental materials applied as liners in deep cavities prepared in human teeth

Background: Since only a few data have been published concerning the effects of resinous dental materials on the pulp-dentin complex, the aim of this study was to evaluate the biocompatibility of resin-based materials applied as liners in deep cavities prepared in duman teeth. Methods: After preparing class V cavities, the following dental materials were applied on the axial walls: group 1, Vitrebond™ (VIT; 3M ESPE); group 2, Ultra-Blend® Plus™ (UBP; Untradent); and group 3, Clearfil™ SE Bond (CSEB; Kuraray). In group 4 (control), the hard-setting calcium hydroxide cement Dycal (CH; Caulk/Dentsply) was used. The teeth extracted at 7 days or between 30 and 85 days after the clinical procedures were processed for histological evaluation. Results: For all the experimental and control groups, most of specimens exhibited no pulpal response or slight inflammatory reaction associated with slight tissue disorganization at 7-day period. Moderate inflammatory pulpal response occurred only in one tooth (RDT = 262 μm) of group 3 in which transdentinal diffusion of resin components was observed. Conclusion: The resin-based dental cements VIT and UBP as well as the bonding agent CSEB presented acceptable biocompatibility when applied in deep cavities prepared in sound human teeth. © 2006 Wiley Periodicals, Inc.

Avaliação cefalométrica das alterações labiais de indivíduos dolicocéfalos portadores de má oclusão classe III, tratados com cirurgia bimaxilar

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Proteína derivada da matriz do esmalte associada à regeneração tecidual guiada e vidro bioativo no tratamento de lesões de furca grau III. Estudo histológico em cães

Pós-graduação em Odontologia - FOAR

Avaliação clínica-epidemiológica e laboratorial do eixo hipotálamo-hipósise-goodal de pacientes com obesidade classe III

Pós-graduação em Ginecologia, Obstetrícia e Mastologia - FMB

Angulação dos caninos em indivíduos portadores de má oclusão de Classe I e de Classe III: análise comparativa através de um novo método utilizando imagens digitalizadas

OBJETIVO: determinar as angulações mesiodistais das coroas dos caninos em indivíduos portadores de má oclusão de Classe III, comparando-os a indivíduos Classe I. MÉTODOS: foram empregadas medidas tomadas em fotografias digitalizadas de modelos de gesso e transportadas para um programa gráfico para leitura das medidas (Image Tool). Tais procedimentos foram repetidos para avaliação do erro do método casual (fórmula de Dahlberg) e para a análise da reprodutibilidade através da Correlação intraclasse. A amostra constituiu-se de 57 pacientes com dentição permanente completa e não tratados ortodonticamente, dividida em dois grupos, de acordo com a má oclusão apresentada: o grupo I foi constituído por 33 pacientes portadores de má oclusão de Classe I, sendo 16 do sexo masculino e 17 do feminino, com média de idades de 27 anos; o grupo II era representado por 24 pacientes portadores de má oclusão de Classe III, 20 do sexo masculino e 4 do feminino, com média de idades de 22 anos. RESULTADOS: o erro casual mostrou-se com uma variação de 1,54 a 1,96 graus para a angulação dos caninos. A análise estatística revelou que o método apresenta uma excelente reprodutibilidade (p<0,01). Os resultados obtidos na angulação da coroa dos caninos não mostraram diferença estatisticamente significativa entre os caninos superiores nos grupos Classe I e Classe III, embora esse dente mostrasse, em média, uma angulação 2 graus maior nos indivíduos Classe III. Entretanto, para os caninos inferiores, foi observada uma diferença estatisticamente significativa em ambos os lados (p=0,0009 e p=0,0074) entre os grupos Classe I e Classe III. Os pacientes Classe III apresentaram uma menor angulação nos caninos inferiores em comparação aos pacientes Classe I, tendendo a acompanhar a compensação natural dos incisivos, descrita rotineiramente na literatura. CONCLUSÃO: os resultados permitem concluir que as compensações dentárias, frequentemente observadas na literatura para a região de incisivos, se estendem também à angulação dos caninos, principalmente no que se refere à arcada inferior.

Influência da hiperplasia condilar no crescimento craniofacial e estabilidade do tratamento de pacientes classe III pós surto de crescimento pubertáro

Pós-graduação em Ciências Odontológicas - FOAR

Efeitos da intrusão ortodôntica na reparação de lesões de furca grau III em cães, e da presença de TNFα e/ou IL-β 1 na mecanoresposta de células ósseas in vitro

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Plasma rico em plaquetas associado a enxerto ósseo autógeno e a membrana absorvível no tratamento de lesões de furca grau III: estudo histomorfométrico em cães

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação dos distúrbios metabólicos de pacientes obesas, grau III, antes e depois da cirurgia bariátrica

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The effect of an Er,Cr:YSGG laser on external adaptation of healthy and decayed cavities

The aim of this study was to evaluate the influence of chlorhexidine and Er, Cr:YSGG laser irradiation on the bond strength and external adaptation in mixed healthy and caries-affected class V cavities before and after thermal cycling. Thirty-six cavity preparations were made in mixed class V buccal human molars, half of them being artificially caries-induced. Any remaining affected dentin was removed from the cavity with a round burr at low speed. The teeth were divided into six groups, according to cleaning agent for both healthy and caries-induced dentin: no treatment, chlorhexidine and erbium, chromium-doped: yttrium, scandium, gallium, garnet (Er,Cr:YSGG) laser irradiation. A Filtek P90 (3M ESPE, St Paul, MN, USA) silorane adhesive restorative system was used. The specimens were subjected to 5000 thermal cycles (5-55 degrees C 60 min). Epoxy replicas were obtained to characterize the external adaptation under scanning electron microscopy. The average percentages of non-continuous margins were 5.41% and 6.49% in enamel dentin before thermal cycling and 25% and 33.7% after thermal cycling, respectively. The caries-affected and laser irradiated cavities showed higher non-continuous margins. Thermal cycling was able to raise the percentage of non-continuous margin for all groups. Chlorhexidine did not affect the marginal adaptation results, and the Er,Cr:YSGG laser irradiation showed significantly worse results compared with the control group.

Diagnóstico e tratamento precoce da Classe III: relato de um caso clínico

In malocclusion studies, may happen not only dental discrepancies but even skeletal discrepancies. In Class III malocclusion can be observed underdeveloped maxilla, mandible protraction or both of them, and, in most of the times associated with a narrow maxilla that causes anterior or posterior crossbites, in one side or in two sides. The aim of this case report is to evaluate the facial profile and occlusal effects of interceptive orthodontics therapy. The treatment with upper arch expansion and maxilla protraction was done in an early age to be effective in the circummaxillary sutural system and to make the orthopedic effect easier. The facial mask used is positioned on two facial points and allows an anterior maxillary replacement. Patients’ compliance is important to reach treatment success, this because using the mask still in this growth and development phase is essential to make the facial and occlusal effects happen. It is important to mention that patients with Angle Class III malocclusion need to be followed till the end of their growth.

Aparelho extrabucal como recurso auxiliar para alinhamento e nivelamento no tratamento orto cirúrgico de má oclusão classe III esquelética

When well indicated, the orthodontic surgical approach is the ideal treatment mean for Skeletal Class III adult patients. To improve facial esthetic results from orthognatic surgery, the leveling and alignment of maxillary dental arch must be achieved with minimal inclination and projection or even retro-inclination of anterior upper teeth. During a pre-surgical phase of 12 months, headgear bilateral force of 150 g/F was applied to the upper molars of a 22 years old male compliant patient with Class III skeletal malocclusion, to provide an upper teeth control of mesial tipping and projection during alignment and leveling. The ideal occlusal parameters required for surgical procedure were achieved without dental extractions permitting a total treatment period of 37 months. The outcomes remained stable over 3 years follow up after the removal of the appliance. The results indicate that, although headgear use depends greatly on patient compliance, when well indicated it is an interesting alternativetopromote dentaldecompensationon pre-surgical period, in order to allow surgical correction of skeletal Class III malocclusion.

Extração de incisivo inferior: uma alternativa no tratamento da classe III

The correction of a Class III malocclusion in adult patients is one of the major challenges in orthodontics due to facial deformities occurring during the unfavorable growth of this kind of pattern, as well as the treatment options capable of producing facial changes aesthetically acceptable and adequate for today's beauty standards. One acceptable alternative treatment is the removal of a lower incisor. For a Class III correction through a lower incisor extraction a thorough analysis and planning must be carried out by taking into consideration the amount of overjet and overbite, periodontal condition of the teeth and the possibility of obtaining a good dental occlusion with acceptable facial aesthetics. Will be presented two case reports of patients presenting an anteroinferior crowding, Class III malocclusion condition. The treatment through a lower incisor extraction and the reasons why this treatment was adopted will be discussed.

Avaliação da via aérea superior em pacientes classe III submetidos à cirurgia ortognática: revisão de literatura

Introduction: The configuration and dimensions of the upper airway are determined by anatomical structures such as soft tissues, muscles and craniofacial skeleton, composing or surrounding the pharynx. Anatomical abnormalities of the soft tissues and / or craniofacial skeleton may become more narrow upper airway. The orthognathic surgery, which is used in the correction of dentoskeletal deformities, also causes changes in the upper airway. Objective: In view of the facts presented, this article aims to review the literature on the changes of the upper airway in patients’ class III undergoing orthognathic surgery. Methodology: International Literature on Health Sciences (Pubmed ) and Port Journals CAPES original and review published between 1990 and 2010, in two bibliographic databases articles were selected. Results: thirty-nine (39) articles were selected for writing this review. Conclusion: The upper airway deformity and dental- skeletal class III should be carefully evaluated prior to orthognathic surgery and whenever surgical planning permit should prefer the maxillary advances to mandibular setbacks

Avaliação do ângulo nasolabial, em radiografias cefalométricas laterais, dividido em ângulo superior e inferior, por uma linha paralela ao plano de frankfort, em índividuos portadores de má-oclusão classe II e classe III de angle

Pós-graduação em Biopatologia Bucal - ICT