Facteurs influencing haptic shape perception

Le but de cette étude était de déterminer la contribution de plusieurs facteurs (le design de la tâche, l’orientation d’angle, la position de la tête et du regard) sur la capacité des sujets à percevoir les différences de formes bidimensionnelles (2-D) en utilisant le toucher haptique. Deux séries d'expériences (n = 12 chacune) ont été effectuées. Dans tous les cas, les angles ont été explorés avec l'index du bras tendu. La première expérience a démontré que le seuil de discrimination des angles 2-D a été nettement plus élevé, 7,4°, que le seuil de catégorisation des angles 2-D, 3,9°. Ce résultat étend les travaux précédents, en montrant que la différence est présente dans les mêmes sujets testés dans des conditions identiques (connaissance des résultats, conditions d'essai visuel, l’orientation d’angle). Les résultats ont également montré que l'angle de catégorisation ne varie pas en fonction de l'orientation des angles dans l'espace (oblique, verticale). Étant donné que les angles présentés étaient tous distribués autour de 90°, ce qui peut être un cas particulier comme dans la vision, cette constatation doit être étendue à différentes gammes d'angles. Le seuil plus élevé dans la tâche de discrimination reflète probablement une exigence cognitive accrue de cette tâche en demandant aux sujets de mémoriser temporairement une représentation mentale du premier angle exploré et de la comparer avec le deuxième angle exploré. La deuxième expérience représente la suite logique d’une expérience antérieure dans laquelle on a constaté que le seuil de catégorisation est modifié avec la direction du regard, mais pas avec la position de la tête quand les angles (non visibles) sont explorés en position excentrique, 60° à la droite de la ligne médiane. Cette expérience a testé l'hypothèse que l'augmentation du seuil, quand le regard est dirigé vers l'extrême droite, pourrait refléter une action de l'attention spatiale. Les sujets ont exploré les angles situés à droite de la ligne médiane, variant systématiquement la direction du regard (loin ou vers l’angle) de même que l'emplacement d'angle (30° et 60° vers la droite). Les seuils de catégorisation n’ont démontré aucun changement parmi les conditions testées, bien que le biais (point d'égalité subjective) ait été modifié (décalage aux valeurs inférieurs à 90°). Puisque notre test avec le regard fixé à l’extrême droite (loin) n'a eu aucun effet sur le seuil, nous proposons que le facteur clé contribuant à l'augmentation du seuil vu précédemment (tête tout droit/regard à droite) doit être cette combinaison particulière de la tête/regard/angles et non l’attention spatiale.

Evaluación de medidas antropométricas (Mano) como factor de riesgo individual para sìndrome de tùnel del carpo en pacientes de ARP Bolívar - Bogotá - 2010

En este estudio el objetivo fue evaluar variables antropométricas de la mano: Largo palma, índice de forma, perímetro de muñeca, perímetro a 1 cm distal del perímetro de la muñeca, índice de muñeca y ajustarlas por género, edad, ocupación, tiempo en el oficio, como factores de riesgo independiente para Síndrome de Túnel del Carpo. Se realizó un estudio de casos y controles con 63 casos con diagnóstico electrofisiológico, de los cuales 58 eran mujeres, 5 hombres contra 63 controles asintomáticos, de los cuales 52 mujeres y 11 hombres. La evaluación de las variables se realizó mediante un análisis bivariado y un análisis multivariado (Regresión Logística) a lo cual se le aplicó una prueba de bondad de ajuste (Análisis de varianza ANOVA). La estratificación de cada una de las variables por género, no fue posible realizarla por el número reducido de hombres. El análisis bivariado mostro la edad mayor de 40 años, largo palma menor de 105.5 mm tiene un efecto significativo de riesgo; que el índice de forma, el perímetro de muñeca, el índice de muñeca, el índice de masa corporal, el perímetro a 1 cm distal del perímetro de muñeca fueron significativamente mayores en el grupo de casos que en el grupo control. En el análisis de regresión logística mostró que la edad mayor de 40 años, I.M.C mayor de 24.9 kg/m2, tiempo en el oficio de 5 a 10 años, el largo palma menor de 105.5 mm, tienen un efecto significativo de riesgo para Síndrome de Túnel del Carpo. En la prueba de bondad de ajuste del modelo de regresión logística (Análisis de varianza ANOVA) Las variables que presentan un efecto significativo para riesgo son: Ocupación 1-Trabajo Operativo Manual, Tiempo en el oficio de 5 a 10 años, Edad mayor de 40 años, I.M.C. mayor de 24.9 Kg/m2 y largo palma menor de 105.5 mm. En conclusión, de las medidas antropométricas evaluadas, la única que presentó una asociación significativa con síndrome de túnel del carpo fue el largo palma menor de 105.5 mm. De las variables individuales y relacionadas con la ocupación presentaron un efecto significativo para riesgo, las ocupaciones que implican trabajos operativos manuales, tiempo en el oficio de 5 a 10 años, edad mayor de 40 años, Índice de masa corporal dentro de los rangos de sobrepeso y obesidad.

Rheology of magmas with bimodal crystal size and shape distributions: insights from analog experiments

Magmas in volcanic conduits commonly contain microlites in association with preexisting phenocrysts, as often indicated by volcanic rock textures. In this study, we present two different experiments that inves- tigate the flow behavior of these bidisperse systems. In the first experiments, rotational rheometric methods are used to determine the rheology of monodisperse and polydisperse suspensions consisting of smaller, prolate particles (microlites) and larger, equant particles (phenocrysts) in a bubble‐free Newtonian liquid (silicate melt). Our data show that increasing the relative proportion of prolate microlites to equant pheno- crysts in a magma at constant total particle content can increase the relative viscosity by up to three orders of magnitude. Consequently, the rheological effect of particles in magmas cannot be modeled by assuming a monodisperse population of particles. We propose a new model that uses interpolated parameters based on the relative proportions of small and large particles and produces a considerably improved fit to the data than earlier models. In a second series of experiments we investigate the textures produced by shearing bimodal suspensions in gradually solidifying epoxy resin in a concentric cylinder setup. The resulting textures show the prolate particles are aligned with the flow lines and spherical particles are found in well‐organized strings, with sphere‐depleted shear bands in high‐shear regions. These observations may explain the measured variation in the shear thinning and yield stress behavior with increasing solid fraction and particle aspect ratio. The implications for magma flow are discussed, and rheological results and tex- tural observations are compared with observations on natural samples.

Contact angle of a hemispherical bubble: an analytical approach

We have calculated the equilibrium shape of the axially symmetric Plateau border along which a spherical bubble contacts a flat wall, by analytically integrating Laplace’s equation in the presence of gravity, in the limit of small Plateau border sizes. This method has the advantage that it provides closed-form expressions for the positions and orientations of the Plateau border surfaces. Results are in very good overall agreement with those obtained from a numerical solution procedure, and are consistent with experimental data. In particular we find that the effect of gravity on Plateau border shape is relatively small for typical bubble sizes, leading to a widening of the Plateau border for sessile bubbles and to a narrowing for pendant bubbles. The contact angle of the bubble is found to depend even more weakly on gravity.

Shape-controlled continuous synthesis of metal nanostructures

A segmented flow-based microreactor is used for the continuous production of faceted nanocrystals. Flow segmentation is proposed as a versatile tool to manipulate the reduction kinetics and control the growth of faceted nanostructures; tuning the size and shape. Switching the gas from oxygen to carbon monoxide permits the adjustment in nanostructure growth from 1D (nanorods) to 2D (nanosheets). CO is a key factor in the formation of Pd nanosheets and Pt nanocubes; operating as a second phase, a reductant, and a capping agent. This combination confines the growth to specific structures. In addition, the segmented flow microfluidic reactor inherently has the ability to operate in a reproducible manner at elevated temperatures and pressures whilst confining potentially toxic reactants, such as CO, in nanoliter slugs. This continuous system successfully synthesised Pd nanorods with an aspect ratio of 6; thin palladium nanosheets with a thickness of 1.5 nm; and Pt nanocubes with a 5.6 nm edge length, all in a synthesis time as low as 150 s.

Head shape evolution in Tropidurinae lizards: does locomotion constrain diet?

Different components of complex integrated systems may be specialized for different functions, and thus the selective pressures acting on the system as a whole may be conflicting and can ultimately constrain organismal performance and evolution. The vertebrate cranial system is one of the most striking examples of a complex system with several possible functions, being associated to activities as different as locomotion, prey capture, display and defensive behaviours. Therefore, selective pressures on the cranial system as a whole are possibly complex and may be conflicting. The present study focuses on the influence of potentially conflicting selective pressures (diet vs. locomotion) on the evolution of head shape in Tropidurinae lizards. For example, the expected adaptations leading to flat heads and bodies in species living on vertical structures may conflict with the need for improved bite performance associated with the inclusion of hard or tough prey into the diet, a common phenomenon in Tropidurinae lizards. Body size and six variables describing head shape were quantified in preserved specimens of 23 species, and information on diet and substrate usage was obtained from the literature. No phylogenetic signal was observed in the morphological data at any branch length tested, suggesting adaptive evolution of head shape in Tropidurinae. This pattern was confirmed by both factor analysis and independent contrast analysis, which suggested adaptive co-variation between the head shape and the inclusion of hard prey into the diet. In contrast to our expectations, habitat use did not constrain or drive head shape evolution in the group.

Melanin as a virulence factor of Paracoccidioides brasiliensis and other dimorphic pathogenic fungi: a minireview

Melanin pigments are substances produced by a broad variety of pathogenic microorganisms, including bacteria, fungi, and helminths. Microbes predominantly produce melanin pigment via tyrosinases, laccases, catecholases, and the polyketide synthase pathway. In fungi, melanin is deposited in the cell wall and cytoplasm, and melanin particles (""ghosts"") can be isolated from these fungi that have the same size and shape of the original cells. Melanin has been reported in several human pathogenic dimorphic fungi including Paracoccidioides brasiliensis, Sporothrix schenckii, Histoplasma capsulatum, Blastomyces dermatitidis, and Coccidioides posadasii. Melanization appears to contribute to virulence by reducing the susceptibility of melanized fungi to host defense mechanisms and antifungal drugs.

Genetic parameters of total milk yield and factors describing the shape of lactation curve in dairy buffaloes

The objective of this study was to apply factor analysis to describe lactation curves in dairy buffaloes in order to estimate the phenotypic and genetic association between common latent factors and cumulative milk yield. A total of 31 257 monthly test-day milk yield records from buffaloes belonging to herds located in the state of São Paulo were used to estimate two common latent factors, which were then analysed in a multi-trait animal model for estimating genetic parameters. Estimates of (co)variance components for the two common latent factors and cumulated 270-d milk yield were obtained by Bayesian inference using a multiple trait animal model. Contemporary group, number of milkings per day (two levels) and age of buffalo cow at calving (linear and quadratic) as covariate were included in the model as fixed effects. The additive genetic, permanent environmental and residual effects were included as random effects. The first common latent factor (F1) was associated with persistency of lactation and the second common latent factor (F2) with the level of production in early lactation. Heritability estimates for Fl and F2 were 0.12 and 0.07, respectively. Genetic correlation estimates between El and F2 with cumulative milk yield were positive and moderate (0.63 and 0.52). Multivariate statistics employing factor analysis allowed the extraction of two variables (latent factors) that described the shape of the lactation curve. It is expected that the response to selection to increase lactation persistency is higher than the response obtained from selecting animals to increase lactation peak. Selection for higher total milk yield would result in a favourable correlated response to increase the level of production in early lactation and the lactation persistency.

Fibroblast growth factor-10 maintains the survival and promotes the growth of cultured goat preantral follicles

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Does attraction to frugivores or defense against pathogens shape fruit pulp composition?

Fruit traits evolve in response to an evolutionary triad between plants, seed dispersers, and antagonists that consume fruits but do not disperse seeds. The defense trade-off hypothesis predicts that the composition of nutrients and of secondary compounds in fruit pulp is shaped by a trade-off between defense against antagonists and attraction to seed dispersers. The removal rate model of this hypothesis predicts a negative relationship between nutrients and secondary compounds, whereas the toxin-titration model predicts a positive relationship. To test these alternative models, we evaluated whether the contents of nutrients and secondary compounds can be used to predict fruit removal by mutualists and pathogens in 14 bird-dispersed plants on a subtropical island in São Paulo state, southeastern Brazil. We selected eight to ten individuals of each species and prevented fruit removal by covering four branches with a net and left fruits on four other branches available to both, vertebrate fruit consumers and pathogens. The persistence of ripe fruits was drastically different among species for bagged and open fruits, and all fruit species persisted longer when protected against seed dispersers. We found that those fruits that are quickly removed by vertebrates are nutrient-rich, but although the attack rate of pathogens is also high, these fruits have low contents of quantitative defenses such as tannins and phenols. Thus, we suggest that the fruit removal rate by seed dispersers is the primary factor selecting the levels of fruit defense. Likewise, nutrient-poor fruits have low removal of seed dispersers and low probability of attack by pathogens. These species retain ripe fruits in an intact condition for a prolonged period because they are highly defended by secondary compounds, which reduce overall attractiveness. However, this strategy might be advantageous for plants that depend on rare or unreliable dispersers.

Measurement of the shape of the boson-transverse momentum distribution in p(p)over-bar -> Z/gamma*-> e(+)e(-)+X events produced at root s=1.96 TeV

We present a measurement of the shape of the Z/gamma* boson transverse momentum (q(T)) distribution in p (p) over bar -> Z/gamma(*)-> e(+)e(-)+X events at a center-of-mass energy of 1.96 TeV using 0.98 fb(-1) of data collected with the D0 detector at the Fermilab Tevatron collider. The data are found to be consistent with the resummation prediction at low q(T), but above the perturbative QCD calculation in the region of q(T)> 30 GeV/c. Using events with q(T)< 30 GeV/c, we extract the value of g(2), one of the nonperturbative parameters for the resummation calculation. Data at large boson rapidity y are compared with the prediction of resummation and with alternative models that employ a resummed form factor with modifications in the small Bjorken x region of the proton wave function.

Hanbury-Brown-Twiss interferometry for sonoluminescence bubble

Two-photon correlation of the light pulse emitted from a sonoluminescence bubble is discussed. It is shown that several important features of the mechanism of light emission, such as the time scale and the shape of the emission region, could be obtained from Hanbury-Brown-Twiss interferometry. We also argue that such a measurement may serve to reject one of the two currently suggested emission mechanisms, i.e., the thermal process versus the dynamical Casimir effect.

Supersymmetric and shape-invariant generalization for nonresonant and intensity-dependent Jaynes-Cummings systems

A class of shape-invariant bound-state problems which represent transitions in a two-level system introduced earlier are generalized to include arbitrary energy splittings between the two levels as well as intensity-dependent interactions. We show that the coupled-channel Hamiltonians obtained correspond to the generalizations of the nonresonant and intensity-dependent Jaynes-Cummings Hamiltonians, widely used in quantized theories of lasers. In this general context, we determine the eigenstates, eigenvalues, the time evolution matrix and the population inversion matrix factor.

Effects of basic fibroblast growth factor on density and morphology of fibroblasts grown on root surfaces with or without conditioning with tetracycline or EDTA.

A study was conducted to evaluate in vitro the effect of root surface conditioning with basic fibroblast growth factor (b-FGF) on morphology and proliferation of fibroblasts. Three experimental groups were used: non-treated, and treated with 50 microg or 125 microg b-FGF/ml. The dentin samples in each group were divided into subgroups according to the chemical treatment received before application of b-FGF: none, or conditioned with tetracycline-HCl or EDTA. After contact with b-FGF for 5 min, the samples were incubated for 24 h with 1 ml of culture medium containing 1 x 10(5) cells/ml plus 1 ml of culture medium alone. The samples were then subjected to routine preparation for SEM, and random fields were photographed. Three calibrated and blind examiners performed the assessment of morphology and density according to two index systems. Classification and regression trees indicated that the root surfaces treated with 125 microg b-FGF and previously conditioned with tetracycline-HCl or EDTA presented a morphology more suggestive of cellular adhesion and viability (P = 0.004). The density of fibroblasts on samples previously conditioned with EDTA, regardless of treatment with b-FGF, was significantly higher than in the other groups (P < 0.001). The present findings suggest that topical application of b-FGF has a positive influence on both the density and morphology of fibroblasts.

Impact of Quantity of Resin, C-factor, and Geometry on Resin Composite Polymerization Shrinkage Stress in Class V Restorations

Objective: This study evaluated the effect of quantity of resin composite, C-factor, and geometry in Class V restorations on shrinkage stress after bulk fill insertion of resin using two-dimensional finite element analysis.Methods: An image of a buccolingual longitudinal plane in the middle of an upper first premolar and supporting tissues was used for modeling 10 groups: cylindrical cavity, erosion, and abfraction lesions with the same C-factor (1.57), a second cylindrical cavity and abfraction lesion with the same quantity of resin (QR) as the erosion lesion, and then all repeated with a bevel on the occlusal cavosurface angle. The 10 groups were imported into Ansys 13.0 for two-dimensional finite element analysis. The mesh was built with 30,000 triangle and square elements of 0.1 mm in length for all the models. All materials were considered isotropic, homogeneous, elastic, and linear, and the resin composite shrinkage was simulated by thermal analogy. The maximum principal (MPS) and von Mises stresses (VMS) were analyzed for comparing the behavior of the groups.Results: Different values of angles for the cavosurface margin in enamel and dentin were obtained for all groups and the higher the angle, the lower the stress concentration. When the groups with the same C-factor and QR were compared, the erosion shape cavity showed the highest MPS and VMS values, and abfraction shape, the lowest. A cavosurface bevel decreased the stress values on the occlusal margin. The geometry factor overcame the effects of C-factor and QR in some situations.Conclusion: Within the limitations of the current methodology, it is possible to conclude that the combination of all variables studied influences the stress, but the geometry is the most important factor to be considered by the operator.