REDUCING TEACHER ATTRITION: THE ROLES AND RESPONSIBILITIES OF BUILDING PRINCIPALS IN A LARGE URBAN DISTRICT TO SUPPORT TEACHER RETENTION

The high rate of teacher attrition in urban schools is well documented. While this does not seem like a problem in Carter County, this equates to hundreds of teachers that need to be replaced annually. Since school year (SY) 2007-08, Carter County has lost over 7,100 teachers, approximately half of (50.1%) of whom resigned, often going to neighboring, higher-paying jurisdictions as suggested by exit survey data (SY2016-2020 Strategic Plan). Included in this study is a range of practices principals use to retain teachers. While the role of the principal is recognized as a critical element in teacher retention, few studies explore the specific practices principals implement to retain teachers and how they use their time to accomplish this task. Through interviews, observations, document analysis and reflective notes, the study identifies the practices four elementary school principals of high and relatively low attrition schools use to support teacher retention. In doing so, the study uses a qualitative cross-case analysis approach. The researcher examined the following leadership practices of the principal and their impact on teacher retention: (a) providing leadership, (b) supporting new teachers, (c) training and mentoring teaching staff, (d) creating opportunities for collaboration, (d) creating a positive school climate, and (e) promoting teacher autonomy. The following research questions served as a foundational guide for the development and implementation of this study: 1. How do principals prioritize addressing teacher attrition or retention relative to all of their other responsibilities? How do they allocate their time to this challenge? 2. What do principals in schools with low attrition rates do to promote retention that principals in high attrition schools do not? What specific practices or interventions are principals in these two types of schools utilizing to retain teachers? Is there evidence to support their use of the practices? The findings that emerge from the data revealed the various practices principals use to influence and support teachers do not differ between the four schools.

The war of attrition in cyber-space or "cyber-attacks", "cyber-war" and "cyber-terrorism"

Nos últimos anos tornou-se óbvio que o mundo virtual das bases de dados e do software – popularmente denominado como ciberespaço – tem um lado negro. Este lado negro tem várias dimensões, nomeadamente perda de produtividade, crime financeiro, furto de propriedade intelectual, de identidade, bullying e outros. Empresas, governos e outras entidades são cada vez mais alvo de ataques de terceiros com o fim de penetrarem as suas redes de dados e sistemas de informação. Estes vão desde os adolescentes a grupos organizados e extremamente competentes, sendo existem indicações de que alguns Estados têm vindo a desenvolver “cyber armies” com capacidades defensivas e ofensivas. Legisladores, políticos e diplomatas têm procurado estabelecer conceitos e definições, mas apesar da assinatura da Convenção do Conselho da Europa sobre Cibercrime em 2001 por vários Estados, não existiram novos desenvolvimentos desde então. Este artigo explora as várias dimensões deste domínio e enfatiza os desafios que se colocam a todos aqueles que são responsáveis pela proteção diária da informação das respetivas organizações contra ataques de origem e objetivos muitas vezes desconhecidos.

Enrolment, student retention and attrition in the tourism management program.

This paper examines the factors motivating students to enrol in the Tourism Management program at Champlain College, St-Lambert and why a large number of students abandon the program before obtaining their DEC. There is a great deal of literature on student attrition, however there is little consensus on why students withdraw from college programs and the results cannot be easily generalized to this particular set of students at this time. Understanding the factors that influenced the students to choose Tourism Management at Champlain, St-Lambert and why they then leave before completing the six semesters will help with student success and with the marketing of the program.||Résumé : Ce travail s'intéresse aux facteurs qui motivent les étudiants à s'inscrire au programme de tourisme offert au Collège Champlain de St-Lambert. Il cherche à établir les raisons qui font en sorte qu'un si grand nombre d'étudiants abandonnent le programme avant d'obtenir leur DEC. Plusieurs recherches ont été effectuées sur l'abandon scolaire, mais il n'y a pas de consensus quant aux raisons pour lesquelles les étudiants se retirent du programme collégial. Actuellement, il est difficile d'établir des liens entre les résultats de ces recherches et ce groupe d'étudiants. La compréhension des facteurs qui influencent les étudiants à choisir le tourisme au Collège Champlain et les raisons qui font en sorte qu'ils quittent avant d'avoir complété leur formation, nous permettront d'améliorer le taux de rétention des étudiants dans ce programme. De plus, cela favorisera le marketing du programme.

Stability Testing of Spray- and Spouted Bed-Dried Extracts of Passiflora alata

The aim of this research was to perform a stability testing of spray- and spouted bed-dried extracts of Passiflora alata Dryander (Passion flower) under stress storage conditions. Spouted bed- and spray-dried extracts were characterized by determination of the average particle diameter (dP), apparent moisture content (XP), total flavonoid content (TF), and vitexin content. Smaller and more irregular particles were generated by the spouted bed system due to a higher attrition rate (surface erosion) inside the dryer. The SB dryer resulted in an end product with higher concentration of flavonoids (approximate to 10%) and lower moisture content (1.6%, dry basis) than the spray dryer, even with both dryers working at similar inlet drying air temperature and ratio between the extract feed flow rate to drying air flow rate (Ws/Wg). Samples of the spouted bed- and spray-dried extracts were stored at two different temperatures (34 and 45 degrees C) and two different relative humidities (52 and 63% RH for 34 degrees C; 52 and 60% RH for 45 degrees C) in order to perform the stability testing. The dried extracts were stored for 28 days and were analyzed every 4 days. The flavonoid vitexin served as the marker compound, which was assayed during the storage period. Results revealed shelf lives ranging from 9 to 184 days, depending on the drying process and storage conditions.

Vocal Symptoms in Telemarketers: A Random and Controlled Field Trial

The present study was carried out to evaluate the effectiveness of a specific program regarding the occurrence of vocal attrition symptoms in telemarketers. A total of 71 subjects participated in this study: 28 completed the Vocal Symptoms questionnaire to test its reliability, and 43 were randomly assigned to two groups: an 8-week vocal training group (n = 14) and a no-training control group (n = 29), to evaluate the effectiveness of the training program with this tool. The voice training group also filled in the posttraining questionnaire `Benefits Obtained with Voice Training` (BVT). The vocal training program was not considered effective with regard to the occurrence of vocal symptoms. However, due to a probable increase in symptoms in untrained telemarketers, it can work as a protective factor. According to BVT answers, the vocal training contributed to an improvement in vocal use as a communication tool for telemarketers. Copyright (C) 2009 S. Karger AG, Basel

Tooth-wear patterns in adolescents with normal occlusion and Class II Division 2 malocclusion

Introduction: In this study, we investigated tooth-wear patterns in adolescents with either normal occlusion or Class II Division 2 malocclusion. Methods: The sample consisted of dental casts from 165 subjects that were divided into 2 groups: 115 normal occlusion subjects (mean age, 14.3 years) and 50 complete Class II Division 2 subjects (mean age, 13.9 years). Dental wear was assessed by using a modified version of the tooth wear index. The 2 groups were compared with the Mann-Whitney test for the frequency and severity of wear on each surface of each group of teeth. The level of statistical significance was set at 5%. Results: The normal occlusion group statistically had greater tooth wear on the incisal surfaces of the maxillary lateral incisors and the incisal surfaces of the maxillary canines than did the Class II Division 2 malocclusion group. The malocclusion group showed statistically greater tooth wear on the labial surfaces of the mandibular lateral incisors, the occlusal surfaces of the maxillary premolars and first molars, the occlusal surfaces of the mandibular premolars, the palatal surfaces of the maxillary second premolars, and the buccal surfaces of the mandibular premolars and first molars than did the normal occlusion group. Conclusions: Subjects with normal occlusion and those with complete Class II Division 2 malocclusions have different tooth-wear patterns. Tooth wear on the malocclusion subjects should not be considered pathologic but, rather, the consequence of different interocclusal arrangements. (Am J Orthod Dentofacial Orthop 2010;137:730.e1-730.e5)

Tooth-wear patterns in subjects with Class II Division 1 malocclusion and normal occlusion

Introduction: The aim of this study was to investigate the prevalence of tooth wear in adolescents with Class II malocclusion, compared with those with normal occlusion. Methods: The sample consisted of dental casts obtained from 310 subjects, divided into 3 groups: group 1, 110 subjects with normal occlusion (mean age, 13.51 years); group 2, 100 complete Class II Division 1 patients (mean age, 13.44 years); and group 3, 100 half-cusp Class II Division 1 patients (mean age, 13.17 years). Dental wear was assessed by using a modified version of the tooth-wear index. The 3 groups were compared by means of the Kruskal-Wallis and Dunn tests, considering the frequency and the severity of wear on each surface of each group of teeth. The level of statistical significance was set at 5%. Results: The normal occlusion group had statistically greater tooth wear on the palatal surfaces of the maxillary central incisors and the incisal surfaces of the maxillary canines than the corresponding surfaces in both Class II malocclusion groups. The complete and half-cusp Class II Division 1 malocclusion groups had statistically greater tooth wear on the occlusal surfaces of the maxillary second premolar and first molar, the occlusal surfaces of the mandibular premolars, and the buccal surfaces of the mandibular posterior teeth compared with the normal occlusion group. The half-cusp Class II Division 1 malocclusion group had significantly greater tooth wear on the incisal surfaces of the mandibular incisors compared with the complete Class II Division 1 malocclusion group. Conclusions: Subjects with normal occlusion and complete or half-cusp Class II Division 1 malocclusions have different tooth-wear patterns. Tooth wear on the malocclusion subjects should not be considered pathologic but rather consequent to the different interocclusal tooth arrangement. (Am J Orthod Dentofacial Orthop 2010; 137: 14. e1-14.e7)

Fatigue life and failure modes of crowns systems with a modified framework design

Objectives: To evaluate the effect of framework design on the fatigue life and failure modes of metal ceramic (MC, Ni-Cr alloy core, VMK 95 porcelain veneer), glass-infiltrated alumina (ICA, In-Ceram Alumina/VM7), and veneered yttria-stabilized tetragonal zirconia polycrystals (Y-TZP, IPSe.max ZirCAD/IPS e.max,) crowns. Methods: Sixty composite resin tooth replicas of a prepared maxillary first molar were produced to receive crowns systems of a standard (MCs, ICAs, and Y-TZPs, n = 10 each) or a modified framework design (MCm, ICAm, and Y-TZPm, n = 10 each). Fatigue loading was delivered with a spherical steel indenter (3.18 mm radius) on the center of the occlusal surface using r-ratio fatigue (30-300 N) until completion of 10(6) cycles or failure. Fatigue was interrupted every 125,000 cycles for damage evaluation. Weibull distribution fits and contour plots were used for examining differences between groups. Failure mode was evaluated by light polarized and SEM microscopy. Results: Weibull analysis showed the highest fatigue life for MC crowns regardless of framework design. No significant difference (confidence bound overlaps) was observed between ICA and Y-TZP with or without framework design modification. Y-TZPm crowns presented fatigue life in the range of MC crowns. No porcelain veneer fracture was observed in the MC groups, whereas ICAs presented bulk fracture and ICAm failed mainly through the veneer. Y-TZP crowns failed through chipping within the veneer, without core fractures. Conclusions: Framework design modification did not improve the fatigue life of the crown systems investigated. Y-TZPm crowns showed comparable fatigue life to MC groups. Failure mode varied according to crown system. (C) 2010 Elsevier Ltd. All rights reserved.

Monolithic CAD/CAM Lithium Disilicate Versus Veneered Y-TZP Crowns: Comparison of Failure Modes and Reliability After Fatigue

Purpose: The aim of this research was to evaluate the fatigue behavior and reliability of monolithic computer-aided design/computer-assisted manufacture (CAD/CAM) lithium disilicate and hand-layer-veneered zirconia all-ceramic crowns. Materials and Methods: A CAD-based mandibular molar crown preparation, fabricated using rapid prototyping, served as the master die. Fully anatomically shaped monolithic lithium disilicate crowns (IPS e.max CAD, n = 19) and hand-layer-veneered zirconia-based crowns (IPS e.max ZirCAD/Ceram, n = 21) were designed and milled using a CAD/CAM system. Crowns were cemented on aged dentinlike composite dies with resin cement. Crowns were exposed to mouth-motion fatigue by sliding a WC-indenter (r = 3.18 mm) 0.7 mm lingually down the distobuccal cusp using three different step-stress profiles until failure occurred. Failure was designated as a large chip or fracture through the crown. If no failures occurred at high loads (> 900 N), the test method was changed to staircase r ratio fatigue. Stress level probability curves and reliability were calculated. Results: Hand-layer-veneered zirconia crowns revealed veneer chipping and had a reliability of < 0.01 (0.03 to 0.00, two-sided 90% confidence bounds) for a mission of 100,000 cycles and a 200-N load. None of the fully anatomically shaped CAD/CAM-fabricated monolithic lithium disilicate crowns failed during step-stress mouth-motion fatigue (180,000 cycles, 900 N). CAD/CAM lithium disilicate crowns also survived r ratio fatigue (1,000,000 cycles, 100 to 1,000 N). There appears to be a threshold for damage/bulk fracture for the lithium disilicate ceramic in the range of 1,100 to 1,200 N. Conclusion: Based on present fatigue findings, the application of CAD/CAM lithium disilicate ceramic in a monolithic/fully anatomical configuration resulted in fatigue-resistant crowns, whereas hand-layer-veneered zirconia crowns revealed a high susceptibility to mouth-motion cyclic loading with early veneer failures. Int J Prosthodont 2010; 23: 434-442.

Reliability of Metalloceramic and Zirconia-based Ceramic Crowns

Despite the increasing utilization of all-ceramic crown systems, their mechanical performance relative to that of metal ceramic restorations (MCR) has yet to be determined. This investigation tested the hypothesis that MCR present higher reliability over two Y-TZP all-ceramic crown systems under mouth-motion fatigue conditions. A CAD-based tooth preparation with the average dimensions of a mandibular first molar was used as a master die to fabricate all restorations. One 0.5-mm Pd-Ag and two Y-TZP system cores were veneered with 1.5 mm porcelain. Crowns were cemented onto aged (60 days in water) composite (Z100, 3M/ESPE) reproductions of the die. Mouth-motion fatigue was performed, and use level probability Weibull curves were determined. Failure modes of all systems included chipping or fracture of the porcelain veneer initiating at the indentation site. Fatigue was an acceleration factor for all-ceramic systems, but not for the MCR system. The latter presented significantly higher reliability under mouth-motion cyclic mechanical testing.

Nucleation, growth and breakage phenomena in agitated wet granulation processes: a review

Wet agglomeration processes have traditionally been considered an empirical art, with great difficulties in predicting and explaining observed behaviour. Industry has faced a range of problems including large recycle ratios, poor product quality control, surging and even the total failure of scale up from laboratory to full scale production. However, in recent years there has been a rapid advancement in our understanding of the fundamental processes that control granulation behaviour and product properties. This review critically evaluates the current understanding of the three key areas of wet granulation processes: wetting and nucleation, consolidation and growth, and breakage and attrition. Particular emphasis is placed on the fact that there now exist theoretical models which predict or explain the majority of experimentally observed behaviour. Provided that the correct material properties and operating parameters are known, it is now possible to make useful predictions about how a material will granulate. The challenge that now faces us is to transfer these theoretical developments into industrial practice. Standard, reliable methods need to be developed to measure the formulation properties that control granulation behaviour, such as contact angle and dynamic yield strength. There also needs to be a better understanding of the flow patterns, mixing behaviour and impact velocities in different types of granulation equipment. (C) 2001 Elsevier Science B.V. All rights reserved.

Dental erosion patterns from intrinsic acid regurgitation and vomiting

Background: The distribution of lesions from dental erosion due to intrinsic acid regurgitation and vomiting may be different from patterns of dental erosion due to extrinsic acids. To date studies have failed to validate this assumption. This study described the sites and nature of lesions from dental erosion in cases of intrinsic acid regurgitation, and compared them with the distribution of lesions occurring in age and sex matched controls, whose lesions are due to extrinsic acids. Methods: The University of Queensland tooth wear clinic patients were screened to select 30 cases, 21 self-identified bulimics and nine medically diagnosed chronic gastric acid regurgitators, and 30 controls. Epoxy resin models of the subjects' dentition were examined under stereoscopic light microscope at magnification 16 to 40. The patterns and sites of tooth wear were recorded for teeth representative of 20 tooth sites in every subject. Results: While the incisal edges of maxillary and mandibular anterior teeth of acid regurgitators were more frequently affected by erosion, incisal attrition was more common on controls' teeth. Cervical lesions were more commonly found in association with incisal attrition in the controls, and in association with incisal erosion in the cases. In 10 per cent of sites in case subjects, cervical lesions associated with incisal erosion were found on the lingual aspects of their mandibular incisors, canines and premolars. These lesions were almost exclusive to the case subjects. Conclusions: These results validate that lingual cervical lesions associated with incisal erosion on the mandibular anterior teeth are strong discriminators between tooth wear in patients with bulimia nervosa or chronic gastro-oesophageal reflux and those whose dental erosion is due to extrinsic acids.

Treatment outcome in individuals with chronic pain: is the Pain Stages of Change Questionnaire (PSOCQ) a useful tool? Jenny StrongCorresponding Author Contact Information, E-mail The Corresponding Author, a, Kym Westburya, Glen Smithb, Ian McKenziec and William Ryan

The efficacy of psychological treatments emphasising a self-management approach to chronic pain has been demonstrated by substantial empirical research. Nevertheless, high drop-out and relapse rates and low or unsuccessful engagement in self-management pain rehabilitation programs have prompted the suggestion that people vary in their readiness to adopt a self-management approach to their pain. The Pain Stages of Change Questionnaire (PSOCQ) was developed to assess a patient's readiness to adopt a self-management approach to their chronic pain. Preliminary evidence has supported the PSOCQ's psychometric properties. The current study was designed to further examine the psychometric properties of the PSOCQ, including its reliability, factorial structure and predictive validity. A total of 107 patients with an average age of 36.2 years (SD = 10.63) attending a multi-disciplinary pain management program completed the PSOCQ, the Pain Self-Efficacy Questionnaire (PSEQ) and the West Haven-Yale Multidimensional Pain Inventory (WHYMPI) pre-admission and at discharge from the program. Initial data analysis found inadequate internal consistencies of the precontemplation and action scales of the PSOCQ and a high correlation (r = 0.66, P < 0.01) between the action and maintenance scales. Principal component analysis supported a two-factor structure: 'Contemplation' and 'Engagement'. Subsequent analyses revealed that the PSEQ was a better predictor of treatment outcome than the PSOCQ scales. Discussion centres upon the utility of the PSOCQ in a clinical pain setting in light of the above findings, and a need for further research. (C) 2002 International Association for the Study of Pain. Published by Elsevier Science B.V. All rights reserved.

Feasibility and acceptability of an exergame intervention for schizophrenia

Objectives To evaluate the feasibility and acceptability of an exergame intervention as a tool to promote physical activity in outpatients with schizophrenia. Design Feasibility/Acceptability Study and Quasi-Experimental Trial. Method Sixteen outpatients with schizophrenia received treatment as usual and they all completed an 8-week exergame intervention using Microsoft Kinect® (20 min sessions, biweekly). Participants completed pre and post treatment assessments regarding functional mobility (Timed Up and Go Test), functional fitness performance (Senior Fitness Test), motor neurological soft signs (Brief Motor Scale), hand grip strength (digital dynamometer), static balance (force plate), speed of processing (Trail Making Test), schizophrenia-related symptoms (Positive and Negative Syndrome Scale) and functioning (Personal and Social Performance Scale). The EG group completed an acceptability questionnaire after the intervention. Results Attrition rate was 18.75% and 69.23% of the participants completed the intervention within the proposed schedule. Baseline clinical traits were not related to game performance indicators. Over 90% of the participants rated the intervention as satisfactory and interactive. Most participants (76.9%) agreed that this intervention promotes healthier lifestyles and is an acceptable alternative to perform physical activity. Repeated-measures MANOVA analyses found no significant multivariate effects for combined outcomes. Conclusion This study established the feasibility and acceptability of an exergame intervention for outpatients with schizophrenia. The intervention proved to be an appealing alternative to physical activity. Future trials should include larger sample sizes, explore patients' adherence to home-based exergames and consider greater intervention dosage (length, session duration, and/or frequency) in order to achieve potential effects.

Fiscal adjustments and sovereign default in different government systems

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Economics from the NOVA – School of Business and Economics