Longitudinal Clinical Evaluation of Undercut Areas and Rest Seats of Abutment Teeth in Removable Partial Denture Treatment

PURPOSE: Adequate preparation of abutment teeth for removable partial denture (RPD) rest seats allows appropriate masticatory force transmission, retention, and stability of supporting structures. It follows that careful preparation will be important for the longevity of the rehabilitation. The present study aimed to clinically evaluate rest seats and undercut areas of abutment teeth in RPD wearers after 2 years of use. MATERIALS AND METHODS: A total of 193 occlusal, incisal, and cingulum rest seats were evaluated in terms of shape, rest adaptation, wear, caries, fractures, and surface type (enamel, composite resin, or amalgam). Two hundred and fourteen undercut areas were evaluated in terms of surface type (enamel or restoration) and integrity. This study was approved by the Research Ethics Committee of the Federal University of Rio Grande do Norte, resolution 196/1996, protocol number 11/05. RESULTS: Intact preparations accounted for 92.2% of the total. Application of the Pearson test (p= 0.289) found no statistically significant differences among the materials on which the rest seats were prepared. For the undercut areas, 20.7% of those obtained on restorative material were nonintact. In addition, Fisher's exact test showed a statistically significant difference (p= 0.001) in surface type; enamel surfaces were shown to be 14 times more stable than restored surfaces. CONCLUSIONS: The results of this study suggest that rest seats are stable, regardless of the material on which they are prepared. Retentive areas were shown to be more stable when they were located in enamel.

Longitudinal Clinical Evaluation of Undercut Areas and Rest Seats of Abutment Teeth in Removable Partial Denture Treatment

PURPOSE: Adequate preparation of abutment teeth for removable partial denture (RPD) rest seats allows appropriate masticatory force transmission, retention, and stability of supporting structures. It follows that careful preparation will be important for the longevity of the rehabilitation. The present study aimed to clinically evaluate rest seats and undercut areas of abutment teeth in RPD wearers after 2 years of use. MATERIALS AND METHODS: A total of 193 occlusal, incisal, and cingulum rest seats were evaluated in terms of shape, rest adaptation, wear, caries, fractures, and surface type (enamel, composite resin, or amalgam). Two hundred and fourteen undercut areas were evaluated in terms of surface type (enamel or restoration) and integrity. This study was approved by the Research Ethics Committee of the Federal University of Rio Grande do Norte, resolution 196/1996, protocol number 11/05. RESULTS: Intact preparations accounted for 92.2% of the total. Application of the Pearson test (p= 0.289) found no statistically significant differences among the materials on which the rest seats were prepared. For the undercut areas, 20.7% of those obtained on restorative material were nonintact. In addition, Fisher's exact test showed a statistically significant difference (p= 0.001) in surface type; enamel surfaces were shown to be 14 times more stable than restored surfaces. CONCLUSIONS: The results of this study suggest that rest seats are stable, regardless of the material on which they are prepared. Retentive areas were shown to be more stable when they were located in enamel.

Diversity of decapod crustaceans at the interface of unconsolidated seabed areas and rocky shores in tropical/subtropical Brazil

The decapod crustacean assemblages from unconsolidated seabed areas located near rocky shores in the Ubatuba region on the south-east coast of Brazil were analysed by investigating the abundance, richness, diversity and dominance of species. The relationships of the sediment and bottom-water temperature to total species abundance, richness and diversity were also evaluated. Monthly samples were taken from January 1998 through December 1999 at sites in Ubatumirim and Mar Virado. At each locality, three areas were defined as either 'exposed', 'sheltered' or 'island'. The highest species abundance was found in the sheltered area of Ubatumirim and the exposed area of Mar Virado, and during autumn. At Ubatumirim, the highest richness occurred in the exposed area and the highest diversity near the island. At Mar Virado, the highest richness and diversity were found near the island. Autumn and winter collections yielded the highest richness but the lowest diversity. The higher diversities, which were measured near the islands and during spring and summer, were consequences of the greater evenness of the data. The areas with the highest diversity also had the most heterogeneous sediment composition, thus reinforcing the hypothesis that areas with more complex substrata support more diverse faunas.

Rinometria acústica: valores de referência numa população de estudantes universitários

RESUMO: A permeabilidade nasal (nasal patency) é um conceito importante na avaliação da função nasal. Pode ser explicado como uma medida do quanto a cavidade nasal está “aberta” e é determinada por fatores dependentes da sua estrutura anatómica que se relacionam com o fluxo e a resistência nasais e a existência de um fenómeno denominado ciclo nasal. Tradicionalmente, a avaliação da permeabilidade nasal baseia-se em indicadores subjetivos, nomeadamente Escalas Visuais Analógicas ou Scores de Sintomas, embora a sensação subjetiva de obstrução nasal seja difícil de quantificar e frequentemente não se correlacione com métodos mais objetivos de avaliação. A Rinometria Acústica (RA) tem adquirido um papel cada vez mais relevante na avaliação das alterações da permeabilidade nasal, pelo seu carácter não-invasivo, rápido, de fácil execução e por ser bem tolerada pelos pacientes. Contudo, não foram ainda publicados valores de referência para a população normal. Com o presente trabalho pretendeu-se determinar áreas transversais (AT) e volumes (Vol) da cavidade nasal em adultos saudáveis através de RA, em condições basais e após a administração de um fármaco descongestionante tópico nasal, relacionando estes parâmetros com variáveis demográficas e antropométricas. MATERIAL E MÉTODOS: O estudo foi realizado em 32 adultos jovens, de ambos os sexos (18 mulheres e 14 homens), com idade igual ou superior a 18 anos, não fumadores, sem patologias crónicas ou infeção recente das vias aéreas superiores. Para a execução do exame de RA foi utilizado o equipamento SRE2000 com Software RhinoScan Interacoustics, Dinamarca). O rinograma foi analisado em condições basais e após descongestionamento até aos 5 cm de distância da narina, obtendo-se os valores médios entre cavidade nasal direita e esquerda das áreas transversais (AT) dos entalhes registados (AT1 e AT2), a sua localização e volumes nasais a diferentes distâncias (Vol.0-2; Vol.2-5 e Vol.0-5). RESULTADOS: Os indivíduos do género masculino apresentaram valores significativamente superiores aos do género feminino em todos os parâmetros estudados. A administração do fármaco descongestionante tópico nasal provocou um aumento generalizado das AT e volumes nasais, traduzindo uma diminuição da congestão da mucosa nasal, mais acentuada posteriormente ao nível dos cornetos. A comparação entre fossas nasais (direita versus esquerda) após descongestionamento, eliminando o efeito do ciclo nasal, revelou simetria significativa. De uma forma geral, os parâmetros rinométricos estudados revelaram correlação positiva significativa com a altura. CONCLUSÃO: O estudo foi pioneiro para a população portuguesa e representa uma contribuição para a obtenção de valores de referência em adultos jovens. Estudos futuros em amostras de maior dimensão e representatividade são necessários para a obtenção de valores de referência com utilidade clínica e em investigação.--------------ABSTRACT: Nasal patency is an important concept in the evaluation of nasal function. It may be explained as a measure of how open the nasal cavity is, and it depends of anatomical aspects, that relate to nasal airflow, resistance and nasal cycle. Nasal patency evaluation is based in subjective indicators like visual analogical scales or symptom scores, but subjective sensation of nasal obstruction is difficult to quantify and usually doesn’t correlate with more objective methods of evaluation. Acoustic rhinometry has gained an increasingly relevant role in assessing changes in nasal patency, because it is noninvasive, fast and easy to perform and well tolerated by patients However, reference values for the normal population have not yet been published. The aim of the present study was to determine nasal cross-sectional areas and volumes in healthy adults by acoustic rhinometry, before and after administration of a topical nasal decongestant drug, correlating these parameters with demographic and anthropometric variables. MATERIAL E METHODS: The study was performed in 32 young adults (18 females and 14 males), aged 18 years old or more, non-smokers, without chronic diseases or recent airway infection. Acoustic rhinometry evaluation was performed using SRE2000 with RhinoScan software (Interacoustics, Denmark). Nasal cavities were assessed up to 5 cm distance from the nostril, before and after administration of the topical nasal decongestant drug, and mean cross-sectional areas of the notches, their location and mean volumes at different distances from nostril were measured. RESULTS: Males presented significant higher values than females for all rhinometric parameters studied. The decongestant drug, significantly increased all the rhinometric parameters evaluated, in particular those corresponding to the more posterior regions. Comparison between nasal cavities after nasal decongestion showed no significant asymmetry. Globally,a positive correlation was found between rhinometric parameters and height . CONCLUSION: This study was pioneer in the Portuguese population and represents a contribution to acoustic rhinometry reference values in young adults . Further studies, on larger and representative samples, are necessary in order to obtain reference values, useful both to clinical and research applications of this technique.

Contribuição da Geodésia ao monitoramento costeiro do Litoral Setentrional do Rio Grande do Norte, área de influência da indústria petrolífera

The general objective of this thesis has been seasonal monitoring (quarterly time scale) of coastal and estuarine areas of a section of the Northern Coast of Rio Grande do Norte, Brazil, environmentally sensitive and with intense sediment erosion in the oil activities to underpin the implementation of projects for containment of erosion and mitigate the impacts of coastal dynamics. In order to achieve the general objective, the work was done systematically in three stages which consisted the specific objectives. The first stage was the implementation of geodetic reference infrastructure for carrying out the geodetic survey of the study area. This process included the implementation of RGLS (Northern Coast of the RN GPS Network), consisting of stations with geodetic coordinates and orthometric heights of precision; positioning of Benchmarks and evaluation of the gravimetric geoid available, for use in GPS altimetry of precision; and development of software for GPS altimetry of precision. The second stage was the development and improvement of methodologies for collection, processing, representation, integration and analysis of CoastLine (CL) and Digital Elevation Models (DEM) obtained by geodetic positioning techniques. As part of this stage have been made since, the choice of equipment and positioning methods to be used, depending on the required precision and structure implanted, and the definition of the LC indicator and of the geodesic references best suited, to coastal monitoring of precision. The third step was the seasonal geodesic monitoring of the study area. It was defined the execution times of the geodetic surveys by analyzing the pattern of sediment dynamics of the study area; the performing of surveys in order to calculate and locate areas and volumes of erosion and accretion (sandy and volumetric sedimentary balance) occurred on CL and on the beaches and islands surfaces throughout the year, and study of correlations between the measured variations (in area and volume) between each survey and the action of the coastal dynamic agents. The results allowed an integrated study of spatial and temporal interrelationships of the causes and consequences of intensive coastal processes operating in the area, especially to the measurement of variability of erosion, transport, balance and supply sedimentary over the annual cycle of construction and destruction of beaches. In the analysis of the results, it was possible to identify the causes and consequences of severe coastal erosion occurred on beaches exposed, to analyze the recovery of beaches and the accretion occurring in tidal inlets and estuaries. From the optics of seasonal variations in the CL, human interventions to erosion contention have been proposed with the aim of restoring the previous situation of the beaches in the process of erosion.

A teoria de Dienes no ensino de transformação de medidas de comprimento, área e volume no curso de pedagogia

The study was aimed to test a teaching module on the Zoltan Paul Dienes theory, focusing on the content: The transformation of measurements: length, areas and volumes. The study based on constructivist theory consisted in a methodological intervention with students of the 7th period of the Course of Pedagogy, in Central Campus, Federal University of Rio Grande do Norte (UFRN). A preliminary study with 40 students called diagnostic evaluation found that students did not understand the concept of measurements transformation and its processing steps. The latter was performed only with the help of the table of measurements transformation with no understanding of the content. He applied a pretest, a set of activities and a post-test. The latter was used as a tool for evaluation of the student learning process. The answers of these ones were evaluated according to the concept of reflective abstraction of Jean Piaget, one of the authors who influenced the Dienes theory

Programa computacional para análise do faturamento do consumo de energia elétrica através do k-hiperbolóide de carga e potência em empresas frigoríficas abatedoras de bovinos

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Máximos e mínimos na geometria euclidiana: uma abordagem histórica

The goal of this work is to perform a historical approach of important results about maxima and minima, on Euclidean geometry, involving perimeters, areas and volumes. As a highlight, we can mention the Dido’s isoperimetric problem and the Papus’s problem about the wit of the bees. In this context, with a concern didactic, we tried to use, whenever possible, the geometry classical formulas to the calculus of areas. On the other hand, in the case of isoperimetric inequality the techniques of differential and integral calculus became more suitable for our purposes.

Tissue coverage of a hydrophilic polymer-coated zotarolimus-eluting stent vs. a fluoropolymer-coated everolimus-eluting stent at 13-month follow-up: an optical coherence tomography substudy from the RESOLUTE All Comers trial

Aims To compare the tissue coverage of a hydrophilic polymer-coated zotarolimus-eluting stent (ZES) vs. a fluoropolymer-coated everolimus-eluting stent (EES) at 13 months, using optical coherence tomography (OCT) in an ‘all-comers' population of patients, in order to clarify the mechanism of eventual differences in the biocompatibility and thrombogenicity of the devices. Methods and results Patients randomized to angiographic follow-up in the RESOLUTE All Comers trial (NCT00617084) at pre-specified OCT sites underwent OCT follow-up at 13 months. Tissue coverage and apposition were assessed strut by strut, and the results in both treatment groups were compared using multilevel logistic or linear regression, as appropriate, with clustering at three different levels: patient, lesion, and stent. Fifty-eight patients (30 ZES and 28 EES), 72 lesions, 107 stents, and 23 197 struts were analysed. Eight hundred and eighty-seven and 654 uncovered struts (7.4 and 5.8%, P= 0.378), and 216 and 161 malapposed struts (1.8 and 1.4%, P= 0.569) were found in the ZES and EES groups, respectively. The mean thickness of coverage was 116 ± 99 µm in ZES and 142 ± 113 µm in EES (P= 0.466). No differences in per cent neointimal volume obstruction (12.5 ± 7.9 vs. 15.0 ± 10.7%) or other areas–volumetric parameters were found between ZES and EES, respectively. Conclusion No significant differences in tissue coverage, malapposition, or lumen/stent areas and volumes were detected by OCT between the hydrophilic polymer-coated ZES and the fluoropolymer-coated EES at 13-month follow-up.

Effects of Strand Geometry on Selected Properties of Long-Stand Structural Composite Lumber Made from Northeastern Hardwoods

Structural composite lumber (SCL) products often possess significantly higher design values than the top grades of solid lumber, making it a popular choice for both residential and commercial applications. The enhanced mechanical properties of SCL are mainly due to defect randomization and densification of the wood fiber, both largely functions of the size, shape and composition (species) of the wood element. Traditionally, SCL manufacturers have used thin, rectangular elements produced from either moderate density softwoods or low density hardwoods. Higher density hardwood species have been avoided, as they require higher pressures to adequately densify and consolidate the wood furnish. These higher pressures can lead to increased manufacturing costs, damage to the wood fiber and/or a product that is too dense, making it heavy and unreceptive to common mechanical fastening techniques. In the northeastern United States high density, diffuse-porous hardwoods (such as maple, beech and birch) are abundant. Use of these species as primary furnish for a SCL product may allow for a competitive advantage in terms of resource cost against products that rely on veneer grade logs. Proximity to this abundant and relatively inexpensive resource may facilitate entry of SCL production facilities in the northeastern United States, where currently none exist. However, modifications to current strand sizes, geometries or production techniques will likely be required to allow for use of these species. A new SCL product concept has been invented allowing for use of these high density hardwoods. The product, referred to as long-strand structural composite lumber (LSSCL), uses strands of significantly larger cross sectional areas and volumes than existing SCL products. In spite of the large strand size, satisfactory consolidation is achieved without excessive densification of the wood fiber through use of a symmetrical strand geometric cross-section. LSSCL density is similar to that of existing SCL products, but is due mainly to the inherent density of the species, rather than through densification. An experiment was designed and conducted producing LSSCL from both large (7/16”) and small (1/4”) strands, of both square and triangular geometric cross sections. Testing results indicate that the large, triangular strands produce LSSCL beams with projected design values of: Modulus of elasticity (MOEapp) – 1,750,000 psi; Allowable bending stress (Fb) – 2750 psi; Allowable shear stress (Fv) – 260 psi. Several modifications are recommended which may lead to improvement of these values, likely allowing for competition against existing SCL products.

Contribuição da Geodésia ao monitoramento costeiro do Litoral Setentrional do Rio Grande do Norte, área de influência da indústria petrolífera

The general objective of this thesis has been seasonal monitoring (quarterly time scale) of coastal and estuarine areas of a section of the Northern Coast of Rio Grande do Norte, Brazil, environmentally sensitive and with intense sediment erosion in the oil activities to underpin the implementation of projects for containment of erosion and mitigate the impacts of coastal dynamics. In order to achieve the general objective, the work was done systematically in three stages which consisted the specific objectives. The first stage was the implementation of geodetic reference infrastructure for carrying out the geodetic survey of the study area. This process included the implementation of RGLS (Northern Coast of the RN GPS Network), consisting of stations with geodetic coordinates and orthometric heights of precision; positioning of Benchmarks and evaluation of the gravimetric geoid available, for use in GPS altimetry of precision; and development of software for GPS altimetry of precision. The second stage was the development and improvement of methodologies for collection, processing, representation, integration and analysis of CoastLine (CL) and Digital Elevation Models (DEM) obtained by geodetic positioning techniques. As part of this stage have been made since, the choice of equipment and positioning methods to be used, depending on the required precision and structure implanted, and the definition of the LC indicator and of the geodesic references best suited, to coastal monitoring of precision. The third step was the seasonal geodesic monitoring of the study area. It was defined the execution times of the geodetic surveys by analyzing the pattern of sediment dynamics of the study area; the performing of surveys in order to calculate and locate areas and volumes of erosion and accretion (sandy and volumetric sedimentary balance) occurred on CL and on the beaches and islands surfaces throughout the year, and study of correlations between the measured variations (in area and volume) between each survey and the action of the coastal dynamic agents. The results allowed an integrated study of spatial and temporal interrelationships of the causes and consequences of intensive coastal processes operating in the area, especially to the measurement of variability of erosion, transport, balance and supply sedimentary over the annual cycle of construction and destruction of beaches. In the analysis of the results, it was possible to identify the causes and consequences of severe coastal erosion occurred on beaches exposed, to analyze the recovery of beaches and the accretion occurring in tidal inlets and estuaries. From the optics of seasonal variations in the CL, human interventions to erosion contention have been proposed with the aim of restoring the previous situation of the beaches in the process of erosion.

Seed rain in areas with and without bamboo dominance within an urban fragment of the Atlantic Forest

Understanding the flow of diaspores is fundamental for determining plant population dynamics in a particular habitat, and a lack of seeds is a limiting factor in forest regeneration, especially in isolated forest fragments. Bamboo dominance affects forest structure and dynamics by suppressing or delaying the recruitment of and colonization by tree species as well as by inhibiting the survival and growth of adult trees. The goal of the present study was to determine whether dominance of the bamboo species Aulonemia aristulata (Döll) McClure in the forest understory influences species abundance and composition. We examined the seed rain at two noncontiguous sites (1.5 km apart) within an urban forest fragment, with and without bamboo dominance (BD+ and BD- areas, respectively). Sixty seed traps (0.5 m², with a 1-mm mesh) were set in the BD+ and BD- areas, and the seed rain was sampled from January to December 2007. Diaspores were classified according to dispersal syndrome, growth form and functional type of the species to which they belonged. There were significant differences between the two areas in terms of seed density, species diversity and dispersal syndrome. The BD+ area showed greater seed density and species diversity. In both areas, seed distribution was limited primarily by impaired dispersal. Bamboo dominance and low tree density resulted in fewer propagules in the seed rain. Our results suggest that low availability of seeds in the rain does not promote the maintenance of a degraded state, characterized by the presence of bamboo.