Bowslaugh Family fonds, 1860-1861, 1868, 1876-1877, 1880-1882, 1886-1890, 1892-1893, 1895, 1898-1899, n.d.

Edward W. Bowslaugh (1843-1923) was the son of Jacob and Anna (Beamer) Bowslaugh. Edward Bowslaugh married Mary Southward, and the couple had six children, Edgar Morley, Edward Freeman, twins Alfred Malcolm and Alice Mary, Annie Olivia, John Jacob and Mabel Florence. Edward W. Bowslaugh was a farmer, contractor and owner of the Grimsby Planing Mills in Grimsby, Ont. and Bowslaugh’s Planing Mill in Kingsville, Ont. The mills manufactured door and sash trim and other wood related products. Some customers contracted the firm to provide wood products for cottages being built at Grimsby Park, the Methodist camp ground. Some time before 1885 Edward Bowslaugh and his family moved to Kingsville, Ont. to open up a new planing mill and door and sash manufactory. He later sold the Grimsby Planing Mills to Daniel Marsh. The diaries and account books include many names of workers as well as friends and family members residing in the Grimsby and Kingsville areas. James M. Bowslaugh (1841-1882) was the son of Jacob and Anna (Beamer) Bowslaugh. James married first Anna Catharine Merritt and after her death in 1875 he married Mary Gee in 1877. James and Anna had three children, Eliza, James Herbert, George Hiram, all died very young. James and Mary Gee had one son, Charles Leopold Kenneth Frederich Bowslaugh, b. 1881. James Bowslaugh was a farmer and lumberman, much like his younger brother Edward. James’ early diaries often note the activities of himself and his brother Edward. Both Edward and James were heavily involved in the Methodist church, teaching or leading Sunday school and attending prayer meetings. Alfred M. Bowslaugh b. 1873 was the son of Edward W. Bowslaugh and his wife Mary Southward. The school notebook is from his days as a student in Kingsville, Ont.

Facteurs de risque modifiables associés à l’incidence, l’élimination et la prévalence d’infections intra-mammaires chez la vache laitière en lactation

La mammite subclinique est un problème de santé fréquent et coûteux. Les infections intra-mammaires (IIM) sont souvent détectées à l’aide de mesures du comptage des cellules somatiques (CCS). La culture bactériologique du lait est cependant requise afin d’identifier le pathogène en cause. À cause de cette difficulté, pratiquement toutes les recherches sur la mammite subclinique ont été centrées sur la prévalence d’IIM et les facteurs de risque pour l’incidence ou l’élimination des IIM sont peu connus. L’objectif principal de cette thèse était d’identifier les facteurs de risque modifiables associés à l’incidence, l’élimination et la prévalence d’IIM d’importance dans les troupeaux laitiers Canadiens. En premier lieu, une revue systématique de la littérature sur les associations entre pratiques utilisées à la ferme et CCS a été réalisée. Les pratiques de gestion constamment associées au CCS ont été identifiées et différentiées de celles faisant l’objet de rapports anecdotiques. Par la suite, un questionnaire bilingue a été développé, validé, et utilisé afin de mesurer les pratiques de gestion d’un échantillon de 90 troupeaux laitiers canadiens. Afin de valider l’outil, des mesures de répétabilité et de validité des items composant le questionnaire ont été analysées et une évaluation de l’équivalence des versions anglaise et française a été réalisée. Ces analyses ont permis d’identifier des items problématiques qui ont du être recatégorisés, lorsque possible, ou exclus des analyses subséquentes pour assurer une certaine qualité des données. La plupart des troupeaux étudiés utilisaient déjà la désinfection post-traite des trayons et le traitement universel des vaches au tarissement, mais beaucoup des pratiques recommandées n’étaient que peu utilisées. Ensuite, les facteurs de risque modifiables associés à l’incidence, à l’élimination et à la prévalence d’IIM à Staphylococcus aureus ont été investigués de manière longitudinale sur les 90 troupeaux sélectionnés. L’incidence d’IIM semblait être un déterminant plus important de la prévalence d’IIM du troupeau comparativement à l’élimination des IIM. Le port de gants durant la traite, la désinfection pré-traite des trayons, de même qu’une condition adéquate des bouts de trayons démontraient des associations désirables avec les différentes mesures d’IIM. Ces résultats viennent souligner l’importance des procédures de traite pour l’obtention d’une réduction à long-terme de la prévalence d’IIM. Finalement, les facteurs de risque modifiables associés à l’incidence, à l’élimination et à la prévalence d’IIM à staphylocoques coagulase-négatif (SCN) ont été étudiés de manière similaire. Cependant, afin de prendre en considération les limitations de la culture bactériologique du lait pour l’identification des IIM causées par ce groupe de pathogènes, une approche semi-Bayesienne à l’aide de modèles de variable à classe latente a été utilisée. Les estimés non-ajusté de l’incidence, de l’élimination, de la prévalence et des associations avec les expositions apparaissaient tous considérablement biaisés par les imperfections de la procédure diagnostique. Ce biais était en général vers la valeur nulle. Encore une fois, l’incidence d’IIM était le principal déterminant de la prévalence d’IIM des troupeaux. Les litières de sable et de produits du bois, de même que l’accès au pâturage étaient associés à une incidence et une prévalence plus basse de SCN.

Wild food trees in Eastern Nuba Mountains, Sudan: Use diversity and threatening factors

This study was conducted in 2010 in Eastern Nuba Mountains, Sudan to investigate ethnobotanical food and non-food uses of 16 wild edible fruit producing trees. Quantitative and qualitative information was collected from 105 individuals distributed in 7 villages using a semi-structured questionnaire. Also gathering of data was done using a number of rapid rural appraisal techniques, including key informant interviews, group discussion, secondary data sources and direct observations. Data was analysed using fidelity level and informant consensus factor methods to reveal the cultural importance of species and use category. Utilizations for timber products were found of most community importance than food usages, especially during cultivated food abundance. Balanites aegyptiaca, Ziziphus spina-christi and Tamarindus indica fruits were asserted as most preferable over the others and of high marketability in most of the study sites. Harvesting for timber-based utilizations in addition to agricultural expansion and overgrazing were the principal threats to wild edible food producing trees in the area. The on and off prevailing armed conflict in the area make it crucial to conserve wild food trees which usually play a more significant role in securing food supply during emergency times, especially in times of famine and wars. Increasing the awareness of population on importance of wild food trees and securing alternative income sources, other than wood products, is necessary in any rural development programme aiming at securing food and sustaining its resources in the area.

Gross direct and embodied carbon sinks for urban inventories

Cities and urban regions are undertaking efforts to quantify greenhouse (GHG) emissions from their jurisdictional boundaries. Although inventorying methodologies are beginning to standardize for GHG sources, carbon sequestration is generally not quantified. This article describes the methodology and quantification of gross urban carbon sinks. Sinks are categorized into direct and embodied sinks. Direct sinks generally incorporate natural process, such as humification in soils and photosynthetic biomass growth (in urban trees, perennial crops, and regional forests). Embodied sinks include activities associated with consumptive behavior that result in the import and/or storage of carbon, such as landfilling of waste, concrete construction, and utilization of durable wood products. Using methodologies based on the Intergovernmental Panel on Climate Change 2006 guidelines (for direct sinks) and peer-reviewed literature (for embodied sinks), carbon sequestration for 2005 is calculated for the Greater Toronto Area. Direct sinks are found to be 317 kilotons of carbon (kt C), and are dominated by regional forest biomass. Embodied sinks are calculated to be 234 kt C based on one year's consumption, though a complete life cycle accounting of emissions would likely transform this sum from a carbon sink to a source. There is considerable uncertainty associated with the methodologies used, which could be addressed with city-specific stock-change measurements. Further options for enhancing carbon sink capacity within urban environments are explored, such as urban biomass growth and carbon capture and storage.

Physical and chemical changes in juvenile and mature woods of Pinus elliottii var. elliottii by thermal modification

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Modeling the spatial and temporal heterogeneity of deforestation-driven carbon emissions: the INPE-EM framework applied to the Brazilian Amazon

We present a generic spatially explicit modeling framework to estimate carbon emissions from deforestation (INPE-EM). The framework incorporates the temporal dynamics related to the deforestation process and accounts for the biophysical and socioeconomic heterogeneity of the region under study. We build an emission model for the Brazilian Amazon combining annual maps of new clearings, four maps of biomass, and a set of alternative parameters based on the recent literature. The most important results are as follows: (a) Using different biomass maps leads to large differences in estimates of emission; for the entire region of the Brazilian Amazon in the last decade, emission estimates of primary forest deforestation range from 0.21 to 0.26 similar to Pg similar to C similar to yr-1. (b) Secondary vegetation growth presents a small impact on emission balance because of the short duration of secondary vegetation. In average, the balance is only 5% smaller than the primary forest deforestation emissions. (c) Deforestation rates decreased significantly in the Brazilian Amazon in recent years, from 27 similar to Mkm2 in 2004 to 7 similar to Mkm2 in 2010. INPE-EM process-based estimates reflect this decrease even though the agricultural frontier is moving to areas of higher biomass. The decrease is slower than a non-process instantaneous model would estimate as it considers residual emissions (slash, wood products, and secondary vegetation). The average balance, considering all biomass, decreases from 0.28 in 2004 to 0.15 similar to Pg similar to C similar to yr-1 in 2009; the non-process model estimates a decrease from 0.33 to 0.10 similar to Pg similar to C similar to yr-1. We conclude that the INPE-EM is a powerful tool for representing deforestation-driven carbon emissions. Biomass estimates are still the largest source of uncertainty in the effective use of this type of model for informing mechanisms such as REDD+. The results also indicate that efforts to reduce emissions should focus not only on controlling primary forest deforestation but also on creating incentives for the restoration of secondary forests.

Reliability of timber bridges using nailed plywood box beams

The Nailed Box Beam structural efficiency is directly dependent of the flange-web joint behavior, which determines the partial composition of the section, as the displacement between elements reduces the effective rigidity of the section and changes the stress distribution and the total displacement of the section. This work discusses the use of Nailed Plywood Box Beams in small span timber bridges, focusing on the reliability of the beam element. It is presented the results of tests carried out in 21 full scale Nailed Plywood Box Beams. The analysis of maximum load tests results shows that it presents a normal distribution, permitting the characteristic values calculation as the normal distribution theory specifies. The reliability of those elements was analyzed focusing on a timber bridge design, to estimate the failure probability in function of the load level.

Utilização de resíduos e derivados de madeira para confecção de uma guitarra elétrica

The residues generation is a quite serious problem in several industrial areas and also in the lumbering area. The search for the elimination or reduction of the volume of generated residues is endless, however limited, resulting in the search for a proper destination or better use, instead of simply burning it. A lot of uses and services are commonly proposed, but with low aggregated value to the residue. This work shows the usage viability of different discarded residues and wood composites in the production of an electric guitar. Cupiúba, ipê and jatobá residues have been used besides wood composites of pinus. The residues and wood composites have shown appropriate resistance, surfacing quality and design terms, and could be used to substitute the traditionally wood used in the production of the instrument as well as in other products of similar characteristics and with larger aggregated value.

Cisalhamento na Linha de Cola de Compensados de Eucalyptus sp. e Adesivo PVA

Studies on new adhesives and resins for bonding wood and wood products are being carried out with the intention to improve their properties, taking into account a lower environmental impact. To this end, new formulations of polyvinyl acetate (PVA) adhesives have been developed, because they have no polluting harmful to health chemicals in their composition, in contrast to formaldehyde-based resins; which in turn are the most commonly used for wood panels production these days. This study tested three different formulations of PVA adhesives, with different pressing times and temperatures for the production of Eucalyptus sp. plywood, obtaining satisfactory results with respect to shear strength at the bondline, which was higher for the PVA adhesives compared to the urea-formaldehyde and phenol-formaldehyde panels found in the literature.

Partitioning of net primary production in Eucalyptus and Acacia stands and in mixed-species plantations: Two case-studies in contrasting tropical environments

The introduction of nitrogen fixing species (NFS) in fast-growing tree plantations is an alternative option to reduce fertilizer inputs. However, the success of mixed-species plantations depends on the balance between positive interactions among species (resulting from facilitation and/or complementarity) and the negative effects of interspecific competition.Using a carbon budget approach and coupling measurements of standing biomass, aboveground litterfall and soil CO2 efflux, we assessed the influence of replacing half of eucalypt trees by Acacia mangium on total belowground carbon flux (TBCF), net primary production (NPP) and its partitioning between above- and belowground growth at two tropical sites in Brazil (Itatinga) and in Congo (Kissoko) exhibiting contrasting climates, edaphic conditions and wood productions.Annual soil CO2 efflux (FS) was significantly lower in the acacia monocultures than in eucalypt monocultures and mixed-species stands at both sites. Annual FS was significantly lower at Itatinga compared to Kissoko for all stands while TBCF was significantly lower in the eucalypt stands only. In the eucalypt monocultures we found a significantly lower aboveground NPP (ANPP) and wood production (wood NPP) at Kissoko compared to Itatinga that was almost fully balanced by a significantly higher belowground NPP (BNPP), leading to similar NPP. Similarly, acacia monocultures exhibited significantly higher ANPP and wood NPP at Itatinga than at Kissoko. The mixed-species stands exhibited a significantly lower wood NPP and ANPP than the eucalypt monocultures at the Brazilian site while NPP of the mixture was not significantly different than the average NPP of the two monocultures. At the Congolese site, NPP of the mixture was significantly higher than the average NPP of the two monocultures. NPP was similar in the mixed-species stand and the eucalypt monoculture with a significantly lower partitioning of NPP to belowground production, leading to a one third higher wood biomass at harvest in the mixed-species stand.A positive effect of growing eucalypts with the nitrogen fixing acacia trees on stand wood production occurred at Kissoko but not at Itatinga. Mixed-species plantations with NFS can be advocated at sites where the productive gains resulting from nitrogen fixation are not compromised by other resource limitations. © 2012 Elsevier B.V.

Influência da qualidade das lâminas no desempenho físico-mecânico de painéis compensados de Hevea brasiliensis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Um modelo de avaliação de fluxos de biomassa e carbono em madeireiras de comunidades isoladas da região amazônica

A Amazônia tem imensos recursos florestais, abrigando um terço das florestas tropicais do mundo. A Amazônia brasileira compreende uma área maior que 5 milhões de km², o que corresponde a 61 % do território brasileiro. A região norte produz 72,45% da madeira em tora do Brasil, o estado do Pará contribui com 55,47% de acordo com IBMA (2007). A exploração madeireira na Amazônia é caracterizada como “garimpagem florestal”, ou seja, os exploradores entram na floresta selecionam as toras de valor comercial e a retiram. Passando-se certo tempo, eles voltam novamente a essa área e a exploram, esse processo de exploração está acontecendo em um intervalo de tempo cada vez menor. A Amazônia legal abrigava 833 serrarias circulares em 1998. Essas serrarias estavam localizadas principalmente no estuário amazônico (71%) – nos furos e tributários dos rios Amazonas, Xingu, Tocantins e Pará. Essas processadoras familiares consumiram conjuntamente 1,3 milhões de metros cúbicos de madeira em tora (5% da produção da Amazônia). Neste trabalho estimou-se o balanço de carbono em serrarias do estuário do rio Amazonas e foi desenvolvido o ciclo de vida do carbono para uma serraria no estuarino amazônico. Foi identificado que no processo produtivo da comunidade há um caminho bem definido do recurso natural (biomassa/madeira): exploração florestal, transporte de biomassa, transformação (empresas madeireiras) / processos produtivos, geração e utilização de resíduos, transporte de madeira processada, comercialização/mercado. O objetivo deste trabalho foi avaliar os recursos energéticos através do fluxo (inputs e outputs) da madeira e da energia no processo. Para isso, desenvolveu um modelo que simulou os fluxos de carbono, da madeira e a área afetada pela exploração. Neste trabalho criou-se um modelo específico onde se avaliou o fluxo de carbono para o cenário estudado; a avaliação do impacto ambiental foi alcançada, onde obteve um valor positivo, uma captura de carbono cerca de 55 tCO₂/mês, mesmo com a baixa eficiência do sistema produtivo, em torno de 36% conclui-se que o sistema atual de exploração não polui mas poderia ser melhorado a fim de alcançar uma maior eficiência do processo produtivo. Enquanto ao resíduo gerado aproximadamente 64% do volume de madeira que entra na serraria conseguira gerar aproximadamente 1240 kW de energia elétrica mensal.

Properties of juvenile and mature woods of Hevea brasiliensis untapped and with tapping panels

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Temperature charts of Hevea brasiliensis during log steaming and its effect on the board cracks

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Produção e caracterização físico-mecânica de painel de compensado de Eucalyptus sp. e adesivo PVA

Studies on new adhesives and resins for bonding wood and wood products are being conducted with the intention of improving their properties, taking into account a lower environmental impact. For this reason new formulations of polyvinyl acetate (PVA) adhesives have been developed, because they have no chemicals in its composition extremely polluting and harmful to health, as is the case of formaldehyde-based resins, which in turn are the most commonly used today for wood panels production. This study tested three different formulations of PVA adhesives, with different times and temperatures of pressing for the production of Eucalyptus sp. Plywood, coming up in satisfactory results with respect to shear strength at the bondline, which was higher for the PVA adhesives compared with urea-formaldehyde and phenol. The results of MOE and MOR were lower than those values of the panels produced with urea and phenol-formaldehyde, and the results of physical tests showed to be close to the panels produced with these same adhesives