Evolución y crisis de la región metropolitana de Madrid 1985-2007. Análisis de las diversas perspectivas para la transformación del gobierno urbano: una revisión crítica del planeamiento

La Región Metropolitana de Madrid (RMM) ha sufrido una gran transformación urbana en el periodo 1985-2007, en el cual ha crecido la población, ha crecido fuertemente el cuerpo físico, pero sobre todo han crecido su coste y su consumo, lo que supone que se ha vuelto más insostenible. Para tratar de comprender esta evolución asimétrica se ensayan sucesivos modelos que tratan de explicar la transformación de la realidad a través de la articulación de las formas de poder y sus políticas asociadas dentro del contexto local-metropolitano. Si se compara la transformación urbana en el periodo 1985-2007 respecto a la registrada durante el desarrollismo previo al presente periodo democrático, se encuentran similitudes, como el amplio consumo de suelo, pero el modelo desarrollista se inscribe en otras lógicas y tiene otros parámetros de contexto y es congruente ya que las últimas décadas del Régimen Franquista se caracterizan por un importantísimo aumento poblacional que se correspondía con el fuerte crecimiento industrial de la RMM. Esa congruencia relativa se pierde en el periodo estudiado, a pesar de que en 1985, se aprueba el Plan General de Ordenación Urbana de Madrid centrado en la ciudad existente y con un crecimiento contenido, y que puede considerarse un modelo abortado. Tras numerosas transformaciones políticas, económicas, sociales y urbanísticas se llega a una situación opuesta a la prevista en el citado Plan. Más de veinte años después, en 2007, se presentan no solo síntomas de agotamiento del modelo finalmente adoptado, sino su quiebra dramática tanto en su dimensión inmobiliario-financiera como del espacio del bienestar. Es precisamente la supresión de los mecanismos de regulación lo que ha caracterizado la evolución de los modelos urbanos, en correspondencia con la desregulación de las actividades económicas y de los flujos de capital propios del modelo "neoliberal". La actual crisis financiera internacional, en especial en algunos países periféricos europeos como España, ha demostrado cómo las políticas económicas que se han llevado a cabo, fuera de toda regulación, han resultado insostenibles. Pero no se trata solo de una crisis económica. En el caso español, de todas las dimensiones de la crisis, destaca la dimensión urbana, o el auge y caída del ciclo inmobiliario, debido a la urbanización intensiva del territorio en relación con el circuito secundario de la acumulación capitalista, habiendo tenido especial incidencia en algunos territorios como la RMM. En la Región Metropolitana de Madrid la situación actual es de crisis urbana, causada principalmente por el divorcio entre las necesidades y la producción de ciudad, pues no se ha basado el crecimiento en la creación de nuevos hogares, u otras cuestiones demográficas, sino en la acumulación de capital a través del crecimiento de la ciudad. Además, dicho crecimiento está conformado por una expansión urbana descontrolada, con mayores requerimientos energéticos que el modelo compacto y complejo tradicional, lo que unido a la escala de los procesos, supone un sistema urbano progresivamente ineficiente. El caso de la RMM resulta paradigmático, ya que la región ha desempeñado un papel como laboratorio de nuevas formas de gobierno y planificación que han dado un mayor protagonismo al espacio, que ha entrado en las dinámicas centrales principalmente por el apoyo al crecimiento físico, a la vez que han confluido circunstancias específicas, como un nuevo impulso al centralismo, lo que ha potenciado ciertas políticas, como considerar la ciudad como motor de crecimiento económico y de competitividad en el concierto europeo y mundial de ciudades. El estudio del papel de la planificación y sus crisis en la sucesión de los modelos, muestra su función nuclear en la propia constitución de estos —es parte fundamental de su aparato de regulación— y su valor no solo para poder entender el periodo, sino para poder proyectar otro futuro urbano. Este enfoque conduce a establecer la relación del planeamiento con las diferentes crisis económicas en el periodo de estudio lo que permite diferenciar tres momentos de dicha relación: la planificación urbanística austera bajo la influencia de la crisis fordista, la salida de la crisis a través de la imposición de un modelo urbano basado en el sobreproducción de espacio urbano, y la entrada en una crisis inmobiliaria y de financiarización en relación a la adopción de un modelo multidimensionalmente insostenible. El análisis de este periodo es la base para apuntar perspectivas que permitan transformar el gobierno urbano hacia un modelo urbano más deseable, o mejor aún, otros futuros posibles, que se enmarcan dentro de la alternativa principal que supone la sostenibilidad. Madrid's Metropolitan Region (MMR) has undergone a major urban transformation in the period 1985-2007, where the population has grown up, the built environment has grown strongly, but mostly its cost and consumption have grown, which means that it has become unsustainable. To try to understand this evolution successive asymmetric models are tested in order to explain the transformation of reality through the articulation of forms of power and its associated policies in that localmetropolitan context. Comparing the urban transformation in the period 1985-2007 to the existing during developmentalism in the current predemocratic period, both have similarities in terms of land consumption, but the previous developmentalism model is part of another logics and has got other context parameters. It is consistent since the last decades of the Franco Regime was characterized by an important population increase that corresponded to strong industrial growth of the MMR. This relative consistency is lost during the study period, although in 1985, with the approval of the Master Plan of Madrid that was focused on the existing city, with a limited growth, and it may be considered an interrupted model. After numerous political, economic, social and urban changes, there is the opposite situation to that foresight under that Plan. Over twenty years later, in 2007, there are not only signs of exhaustion of the model which was finally adopted, but also its dramatic collapse in both real estate and financial dimension of space as well. The urban transformation under analysis has relaunched the hegemony of the sectors that rule the growth of the Madrid's Metropolitan Region and it is supported by decision making and financing of the different administrations with the passivity of the social stakeholders and citizens. This has meant the removal of regulatory mechanisms that have characterized the evolution of urban models, corresponding to the deregulation of economic activities and capital flows according to "neoliberal" model. The current international financial crisis, especially in some European peripheral countries like Spain, has shown how economic policies that have been carried out, without any regulation, have proven unsustainable. But it is not only an economic crisis. In the Spanish case, of all the dimensions of the crisis, it is the urban dimension that is highlighted, or the rise and fall of real estate cycle, due to intensive urbanization of the territory in relation to the secondary circuit of capital accumulation, having had a particular impact in some territories such as the Madrid's Metropolitan Region. In Madrid's Metropolitan Region there is the current situation of urban crisis, mainly caused by the divorce between needs and the city (space) production, because no growth has been based on creating new homes, or other demographic issues, but in the capital accumulation through growth of the city. Furthermore, this growth is made up of urban sprawl, with higher energy requirements than the traditional compact and complex one, which together with the scale of processes, is increasingly an inefficient urban system. The case of Madrid's Metropolitan Region is paradigmatic, since the region has played a role as a laboratory for new forms of governance and planning have given a greater role to space, which has entered the core dynamics supported mainly by physical growth, while specific circumstances have come together as a new impulse to centralization. This has promoted policies such as considering the city as an engine of economic growth and competitiveness in the international and the European hierarchy of cities. The study of the role of planning and crisis in the succession of models, shows its nuclear role in the constitution of these models is a fundamental part of its regulatory apparatus- and also its value not only to understand the period, but to anticipate to other urban future. This approach leads to establish the relationship of planning with the various crises in the study period, allowing three different moments of that relationship: the austere urban planning under the influence of Fordist crisis, the output of the crisis through imposition of an urban model based on the overproduction of urban space, and entry into a housing crisis and financialisation in relation to the adoption of a multi-dimensionally unsustainable model. The analysis of this period is the basis for targeting prospects that translate urban governance towards a more desirable urban model, or better yet, other possible futures, which are part of the main alternative that is sustainability.

Large Scale Fire Tests for the “Calle 30 Project"

Between 2003 and 2007 an urban network of road tunnels with a total constructed tubes length of 45 km was built in the city of Madrid. This amazing engineering work, known as “Calle30 Project” counted with different kinds of tunnel typologies and ventilation systems. Due to the length of the tunnels and the impact of the work itself, the tunnels were endowed with a great variety of installations to provide the maximum levels of safety both for users and the infrastructure including,in some parts of the tunnel, fixed fire fighting system based on water mist. Within this framework a large-scale campaign of fire tests were planned to study different aspects related to fire safety in the tunnels including the phenomena of the interaction between ventilation and extinction system. In addition, this large scale fire tests allowed fire brigades of the city of Madrid an opportunity to define operational procedures for specific fire fighting in tunnels and evaluate the possibilities of fixed fire fighting systems. The tests were carried out in the Center of Experimentation "San Pedro of Anes" which counts with a 600 m tunnel with a removable false ceiling for reproducing different ceiling heights and ventilation conditions (transverse and longitudinal ones). Interesting conclusions on the interaction of ventilation and water mist systems were obtained but also on other aspects including performance of water mist system in terms of reduction of gas temperatures or visibility conditions. This paper presents a description of the test’s campaign carried out and some previous results obtained.

Quantity-quality simulation (QQS) : a detailed continuous planning model for urban runoff control /

Mode of access: Internet.

Planning the neighbourhood economy:land-use plans and the economic potential of urban residential neighbourhoods in the Netherlands

This article investigates the relationship between zoning by-laws, as put forward in governmental land-use plans and the viability of urban residential neighbourhood economies. The Dutch planning tradition has long been characterized by strict separation of functions and top-down planning. We argue that profound changes in social and economic structures make land-use planning practices less suitable for the current policy formula of "mixed urban milieus". Although the residential neighbourhood might not be the location of large firms, it definitely attracts small ones, and facilitates starting businesses whose presence (and potential growth) can be beneficial to the city as a whole. We present a typology of spatial patterns of neighbourhood economies based on land-use plans and describe whether these are related to the distinctive economic development of the neighbourhood over the period 1999-2007. © 2013 Taylor & Francis.

Numerical Investigation on the Heat Transfer Enhancement Using Micro/Nano Phase-Change Particulate Flow

The introduction of phase change material fluid and nanofluid in micro-channel heat sink design can significantly increase the cooling capacity of the heat sink because of the unique features of these two kinds of fluids. To better assist the design of a high performance micro-channel heat sink using phase change fluid and nanofluid, the heat transfer enhancement mechanism behind the flow with such fluids must be completely understood. A detailed parametric study is conducted to further investigate the heat transfer enhancement of the phase change material particle suspension flow, by using the two-phase non-thermal-equilibrium model developed by Hao and Tao (2004). The parametric study is conducted under normal conditions with Reynolds numbers of Re=600-900 and phase change material particle concentrations ¡Ü0.25 , as well as extreme conditions of very low Reynolds numbers (Re < 50) and high phase change material particle concentration (0.5-0.7) slurry flow. By using the two newly-defined parameters, named effectiveness factor and performance index, respectively, it is found that there exists an optimal relation between the channel design parameters, particle volume fraction, Reynolds number, and the wall heat flux. The influence of the particle volume fraction, particle size, and the particle viscosity, to the phase change material suspension flow, are investigated and discussed. The model was validated by available experimental data. The conclusions will assist designers in making their decisions that relate to the design or selection of a micro-pump suitable for micro or mini scale heat transfer devices. To understand the heat transfer enhancement mechanism of the nanofluid flow from the particle level, the lattice Boltzmann method is used because of its mesoscopic feature and its many numerical advantages. By using a two-component lattice Boltzmann model, the heat transfer enhancement of the nanofluid is analyzed, through incorporating the different forces acting on the nanoparticles to the two-component lattice Boltzmann model. It is found that the nanofluid has better heat transfer enhancement at low Reynolds numbers, and the Brownian motion effect of the nanoparticles will be weakened by the increase of flow speed.

Data structures for SIMD logic simulation

Due to the growth of design size and complexity, design verification is an important aspect of the Logic Circuit development process. The purpose of verification is to validate that the design meets the system requirements and specification. This is done by either functional or formal verification. The most popular approach to functional verification is the use of simulation based techniques. Using models to replicate the behaviour of an actual system is called simulation. In this thesis, a software/data structure architecture without explicit locks is proposed to accelerate logic gate circuit simulation. We call thus system ZSIM. The ZSIM software architecture simulator targets low cost SIMD multi-core machines. Its performance is evaluated on the Intel Xeon Phi and 2 other machines (Intel Xeon and AMD Opteron). The aim of these experiments is to: • Verify that the data structure used allows SIMD acceleration, particularly on machines with gather instructions ( section 5.3.1). • Verify that, on sufficiently large circuits, substantial gains could be made from multicore parallelism ( section 5.3.2 ). • Show that a simulator using this approach out-performs an existing commercial simulator on a standard workstation ( section 5.3.3 ). • Show that the performance on a cheap Xeon Phi card is competitive with results reported elsewhere on much more expensive super-computers ( section 5.3.5 ). To evaluate the ZSIM, two types of test circuits were used: 1. Circuits from the IWLS benchmark suit [1] which allow direct comparison with other published studies of parallel simulators.2. Circuits generated by a parametrised circuit synthesizer. The synthesizer used an algorithm that has been shown to generate circuits that are statistically representative of real logic circuits. The synthesizer allowed testing of a range of very large circuits, larger than the ones for which it was possible to obtain open source files. The experimental results show that with SIMD acceleration and multicore, ZSIM gained a peak parallelisation factor of 300 on Intel Xeon Phi and 11 on Intel Xeon. With only SIMD enabled, ZSIM achieved a maximum parallelistion gain of 10 on Intel Xeon Phi and 4 on Intel Xeon. Furthermore, it was shown that this software architecture simulator running on a SIMD machine is much faster than, and can handle much bigger circuits than a widely used commercial simulator (Xilinx) running on a workstation. The performance achieved by ZSIM was also compared with similar pre-existing work on logic simulation targeting GPUs and supercomputers. It was shown that ZSIM simulator running on a Xeon Phi machine gives comparable simulation performance to the IBM Blue Gene supercomputer at very much lower cost. The experimental results have shown that the Xeon Phi is competitive with simulation on GPUs and allows the handling of much larger circuits than have been reported for GPU simulation. When targeting Xeon Phi architecture, the automatic cache management of the Xeon Phi, handles and manages the on-chip local store without any explicit mention of the local store being made in the architecture of the simulator itself. However, targeting GPUs, explicit cache management in program increases the complexity of the software architecture. Furthermore, one of the strongest points of the ZSIM simulator is its portability. Note that the same code was tested on both AMD and Xeon Phi machines. The same architecture that efficiently performs on Xeon Phi, was ported into a 64 core NUMA AMD Opteron. To conclude, the two main achievements are restated as following: The primary achievement of this work was proving that the ZSIM architecture was faster than previously published logic simulators on low cost platforms. The secondary achievement was the development of a synthetic testing suite that went beyond the scale range that was previously publicly available, based on prior work that showed the synthesis technique is valid.

Avaliação da disponibilidade de espaços verdes públicos no contexto urbano e a sua relação com a perceção dos residentes. Um estudo para a cidade de Bragança

Os espaços verdes públicos urbanos são muito importantes no contexto urbano. Influenciam de diversas formas na qualidade de vida das populações, proporcionando benefícios ambientais, sociais e econômicos. A fim de avaliar a disponibilidade destes espaços na cidade de Bragança, foram realizadas análises utilizando indicadores, com apoio dos software ArcGIS 9.3 e QGis 2.14.0-Essen, que permitiram avaliar a oferta destes espaços nas suas diferentes tipologias e categorias dimensionais. Para o efeito foram aplicados os indicadores: Percentagem de espaços verdes, Espaços verdes per capita, Distância média, Índice de Área Verde por Área de Implantação e Índice de Área Verde por Área Coberta. Posteriormente, procedeu-se à aplicação de inquéritos a fim de avaliar as perceções e atitudes de uma amostra da população de Bragança, realizando análises descritivas e estatísticas, com recurso ao software SPSS17, buscando descrever a atual relação com os espaços verdes e usando testes não paramétricos para identificar diferenças entre subgrupos da amostra, numa análise centrada em dois níveis: a escala urbana e a escala de Bairro. Procurando avaliar possíveis alterações futuras, foram testados cenários realistas, um correspondendo à introdução de espaços verdes em terrenos na posse da Autarquia e outro considerando a ampliação das áreas verdes previstas no Plano de Urbanização de Bragança de 2010. Os Resultados permitiram identificar diferenças relevantes na oferta de espaços verdes da cidade. Aplicando os indicadores foi possível verificar que existe a concentração de espaços verdes de maior dimensão na zona central da cidade, denotando um claro desequilíbrio na introdução de novos espaços em zonas de expansão urbana. Os inquéritos aplicados possibilitaram constatar que os inquiridos que possuem maior disponibilidade de espaços verdes em seu bairro de residência apresentam respostas mais satisfatórias em relação a acessibilidade e a aparência visual e paisagística dos bairros. Da análise de cenários resulta que com a implantação de novos espaços verdes, para as duas análises, ocorreria uma melhoria da oferta e distribuição dos espaços verdes na cidade permitindo um maior reequilíbrio face à concentração na zona central, melhorando a acessibilidade para toda a população.

Wavelet analysis and hierarchical clustering of ofm phenotypic population's variations originated from southern america and europe and attempts of a first relation to molecular divergence.

In this work we compare Grapholita molesta Busck (Lepidoptera: Tortricidae) populations originated from Brazil, Chile, Spain, Italy and Greece using power spectral density and phylogenetic analysis to detect any similarities between the population macro- and the molecular micro-level. Log-transformed population data were normalized and AR(p) models were developed to generate for each case population time series of equal lengths. The time-frequency/scale properties of the population data were further analyzed using wavelet analysis to detect any population dynamics frequency changes and cluster the populations. Based on the power spectral of each population time series and the hierarchical clustering schemes, populations originated from Southern America (Brazil and Chile) exhibit similar rhythmic properties and are both closer related with populations originated from Greece. Populations from Spain and especially Italy, have higher distance by terms of periodic changes on their population dynamics. Moreover, the members within the same cluster share similar spectral information, therefore they are supposed to participate in the same temporally regulated population process. On the contrary, the phylogenetic approach revealed a less structured pattern that bears indications of panmixia, as the two clusters contain individuals from both Europe and South America. This preliminary outcome will be further assessed by incorporating more individuals and likely employed a second molecular marker.

Er : YAG laser, ultrasonic system, and curette produce different profiles on dentine root surfaces: An in vitro study

Objective: The aim of the present study was to compare the in vitro effects of the Er:YAG laser, an ultrasonic system, and manual curette on dentine root surface by roughness and micro-morphological analysis. Materials and Methods: Thirty-six flattened bovine roots were randomly assigned to one of the following groups: group 1 (n = 12): Er: YAG laser ( 2940 nm), 120 mJ/pulse, 10 Hz, 8.4 J/cm(2); group 2 ( n = 12): ultrasonic system; and group 3 ( n = 12): manual curette. The mean surface roughness (Ra) of each sample was measured using a profilometer before and after the treatments. The micro-morphology of the treated and untreated ( control) root surfaces was evaluated with scanning electron microscopy (SEM) at 50 x and 1000 x magnification. Results: Analysis with the profilometer showed that for equal times of instrumentation, the smoothest surfaces were produced by the Er: YAG laser and the ultrasonic system, followed by the curette ( p < 0.05). Morphological analyses demonstrated that treatment with the Er: YAG laser produced some areas with an irregular surface, craters, and ablation of the intertubular dentin. The smear layer was removed and dentine tubules were opened by both curettes and the ultrasonic system. The micro-morphology of the dentine root surface after ultrasonic treatment, however, demonstrated randomly distributed areas cratering. Conclusion: All instruments increased the roughness of the dentine root surface after treatment; however, the curette produced rougher surfaces than the other devices. SEM analysis revealed distinct root surface profiles produced by the three devices.

Coloured Petri nets and graphical simulation for the validation of a robotic cell in aircraft industry

This paper proposes a mixed validation approach based on coloured Petri nets and 3D graphic simulation for the design of supervisory systems in manufacturing cells with multiple robots. The coloured Petri net is used to model the cell behaviour at a high level of abstraction. It models the activities of each cell component and its coordination by a supervisory system. The graphical simulation is used to analyse and validate the cell behaviour in a 3D environment, allowing the detection of collisions and the calculation of process times. The motivation for this work comes from the aeronautic industry. The automation of a fuselage assembly process requires the integration of robots with other cell components such as metrological or vision systems. In this cell, the robot trajectories are defined by the supervisory system and results from the coordination of the cell components. The paper presents the application of the approach for an aircraft assembly cell under integration in Brazil. This case study shows the feasibility of the approach and supports the discussion of its main advantages and limits. (C) 2011 Elsevier Ltd. All rights reserved.

Model based procedure for scale-up of wet overflow ball mills Part 1: Outline of the methodology

Bond's method for ball mill scale-up only gives the mill power draw for a given duty. This method is incompatible with computer modelling and simulation techniques. It might not be applicable for the design of fine grinding ball mills and ball mills preceded by autogenous and semi-autogenous grinding mills. Model-based ball mill scale-up methods have not been validated using a wide range of full-scale circuit data. Their accuracy is therefore questionable. Some of these methods also need expensive pilot testing. A new ball mill scale-up procedure is developed which does not have these limitations. This procedure uses data from two laboratory tests to determine the parameters of a ball mill model. A set of scale-up criteria then scales-up these parameters. The procedure uses the scaled-up parameters to simulate the steady state performance of full-scale mill circuits. At the end of the simulation, the scale-up procedure gives the size distribution, the volumetric flowrate and the mass flowrate of all the streams in the circuit, and the mill power draw.

Model-based procedure for scale-up of wet, overflow ball mills - Part II: Worked example

A new ball mill scale-up procedure is developed which uses laboratory data to predict the performance of MI-scale ball mill circuits. This procedure contains two laboratory tests. These laboratory tests give the data for the determination of the parameters of a ball mill model. A set of scale-up criteria then scales-up these parameters. The procedure uses the scaled-up parameters to simulate the steady state performance of the full-scale mill circuit. At the end of the simulation, the scale-up procedure gives the size distribution, the volumetric flowrate and the mass flowrate of all the streams in the circuit, and the mill power draw. A worked example shows how the new ball mill scale-up procedure is executed. This worked example uses laboratory data to predict the performance of a full-scale re-grind mill circuit. This circuit consists of a ball mill in closed circuit with hydrocyclones. The MI-scale ball mill has a diameter (inside liners) of 1.85m. The scale-up procedure shows that the full-scale circuit produces a product (hydrocyclone overflow) that has an 80% passing size of 80 mum. The circuit has a recirculating load of 173%. The calculated power draw of the full-scale mill is 92kW (C) 2001 Elsevier Science Ltd. All rights reserved.

Multi-scale modeling of the mechanical behavior of polymer-based materials

Polymers have become the reference material for high reliability and performance applications. In this work, a multi-scale approach is proposed to investigate the mechanical properties of polymeric based material under strain. To achieve a better understanding of phenomena occurring at the smaller scales, a coupling of a Finite Element Method (FEM) and Molecular Dynamics (MD) modeling in an iterative procedure was employed, enabling the prediction of the macroscopic constitutive response. As the mechanical response can be related to the local microstructure, which in turn depends on the nano-scale structure, the previous described multi-scale method computes the stress-strain relationship at every analysis point of the macro-structure by detailed modeling of the underlying micro- and meso-scale deformation phenomena. The proposed multi-scale approach can enable prediction of properties at the macroscale while taking into consideration phenomena that occur at the mesoscale, thus offering an increased potential accuracy compared to traditional methods.

On the use of IEEE 802.15.4/Zigbee for time-sensitive wireless sensor network applications

Mestrado em Engenharia Electrotécnica e de Computadores

A simulation of integrated photovoltaic conversion into electric grid

This paper presents a systemic modeling for a PV system integrated into an electric grid. The modeling includes models for a DC-DC boost converter and a DC-AC two-level inverter. Classical or fuzzy PI controllers with pulse width modulation by space vector modulation associated with sliding mode control is used for controlling the PV system and power factor control is introduced at the output of the system. Comprehensive performance simulation studies are carried out with the modeling of the DC-DC boost converter followed by a two-level power inverter in order to compare the performance with the experimental results obtained during in situ operation with three commercial inverters. Also, studies are carried out to assess the quality of the energy injected into the electric grid in terms of harmonic distortion. Finally, conclusions regarding the integration of the PV system into the electric grid are presented. (C) 2014 Elsevier Ltd. All rights reserved.