Study on cracked plates, shells and 3 dimensional bodies

This paper presents a summary of the authors' recent work in following areas: (1) The stress-strain fields at crack tip in Reissner's plate. (2) The calculations of the stress intensity factors in finite size plates. (3) The stress-strain fields at crack tip in Reissner's shell. (4) The calculations of the stress intensity factors and bulging coefficients in finite size spherical shells. (5) The stress-strain fields along crack tip in three dimensional body with surface crack. (6) The calculation of stress intensity factors in a plate with surface crack.

On the non-linear stability theory of spinning solid bodies with liquid-filled cavities and its application to the columbus problem

In this paper, we first present a system of differential-integral equations for the largedisturbance to the general case that any arbitrarily shaped solid body with a cavity contain-ing viscous liquid rotates uniformly around the principal axis of inertia, and then develop aweakly non-linear stability theory by the Lyapunov direct approach. Applying this theoryto the Columbus problem, we have proved the consistency between the theory and Kelvin'sexperiments.

Teaching how to Look at and View Bodies within Literature

[EN] This paper focuses on how to initiate discussions of the regulatory gaze in primary school classrooms through the study of characters in literature. It specifically focuses on two renowned characters in Spanish literature: Xola (Bernardo Atxaga) and Iholdi (Mariasun Landa). These characters are composed of a chorus of looks which in turn also look. We shall carefully reflect upon these looks and discuss how we see others, how others see us, and how we would like others to see us.

Characteristics of Wake Flow in Long Bluff Bodies

Vortex shedding is the main characteristics of bluff bodies, which will cause the bluff bodies to vibrate and sometimes result in the structures failure. In this paper the wake flow characteristics of 21 bluff bodies with rectangular, rounded and angular profiles and the length-to-width ratio in the range of 4~12 were deeply studied by Micro ADV. Two parameters, namely the relative intensity of the load due to Karman vortices and the large scale vortex intensity, were introduced to measure the wake flow intensity. Generally, the values of these parameters for different bluff bodies are consistent with each other. The experiment results showed that the key factor affecting the wake flow characteristics is the bluff edge, especially the leading edge geometry. The wake flow in bluff bodies with rounded edge profiles has more regular vortices and becomes more periodic than that in bluff bodies with rectangular ones. A bluff body with angular edged profile was witnessed to have not only small wake loading but small hydraulic resistance also.

Sustainable management of water bodies for small-scale fisheries resorces research and development

Abstract The rapid growth of both formal and informal high density urban settlements around major water resources has led to increased pollution of streams, rivers, lakes and estuaries, due to contaminated runoff from these developments. The paper identified major contaminants to be : organic waste (sewage), industrial effluent, pesticides and litter. Pollutant loads vary depending on the hydrology of the urban area, local topography and soil conditions. In some instances, severe pollution of neighbouring and downstream water courses has been observed. The management of catchment land uses, riparian zones, in stream habitat, as well as in stream water flow patterns and quality are necessary in order to sustain the integrity and "health" of water resources, for fisheries and other developments. As such, attempts to ensure a certain level of water quality without attention to other aspects will not automatically ensure a "healthy" ecosystem even as fish habitat. Proper management leads to better water quality and conducive environment for increased fish production

Utilization of some aquatic macrophytes in Nigeria in-land water bodies: a review

Aquatic vegetation is an essential component of the aquatic ecosystem with both positive and negative implications on the water body. Efforts are always made to curtail the excessive growth of aquatic plants in order to prevent them from becoming a nuisance in the ecosystem. One of the ways of solving such problem is the positive economic use of such plants. Utilization as a method of weed control within the aquatic ecosystem is considered to be one of the safest methods of weed control as this provides the riparian communities double advantages in terms of save environment and personal benefits of the plant. The flora diversity of freshwater and brackish environments posses a great potential to both man and higher animals alike. Due to this fact, this paper attempt to review the exploited and unexploited aquatic plants resources of many of our water bodies in Nigeria both economica/ly and socially, to the populace. Recommendations are also advanced for further studies that will enhance sound management of the resources for maximum benefits and sustainability

Fish diversity of the wild and aquaculture water bodies in Singida Region

Tanzania Fisheries Research Institute being currently the only fisheries research institute in Tanzania has sole responsibility of marking the presence and distribution of fish species in the country. This work is expected to be completed by the year 2005. In order that this work can be accomplished, both published works and field observations (including geographical location using GPS) have to be compiled. Since the institute has centers in all the Great Lakes and one along the Indian Ocean coast, it is expected that field observations and identifications will be obtained and incorporated into the document to be produced by 2005. (PDF contains 15 pages)

The influence of freestream turbulence, freestream nuclei populations and a drag-reducing polymer on cavitation inception on two axisymmetric bodies

The influence upon the basic viscous flow about two axisymmetric bodies of (i) freestream turbulence level and (ii) the injection of small amounts of a drag-reducing polymer (Polyox WSR 301) into the test model boundary layer was investigated by the schlieren flow visualization technique. The changes in the type and occurrence of cavitation inception caused by the subsequent modifications in the viscous flow were studied. A nuclei counter using the holographic technique was built to monitor freestream nuclei populations and a few preliminary tests investigating the consequences of different populations on cavitation inception were carried out.

Both test models were observed to have a laminar separation over their respective test Reynolds number ranges. The separation on one test model was found to be insensitive to freestream turbulence levels of up to 3.75 percent. The second model was found to be very susceptible having its critical velocity reduced from 30 feet per second at a 0.04 percent turbulence level to 10 feet per second at a 3.75 percent turbulence level. Cavitation tests on both models at the lowest turbulence level showed the value of the incipient cavitation number and the type of cavitation were controlled by the presence of the laminar separation. Cavitation tests on the second model at 0.65 percent turbulence level showed no change in the inception index, but the appearance of the developed cavitation was altered.

The presence of Polyox in the boundary layer resulted in a cavitation suppression comparable to that found by other investigators. The elimination of the normally occurring laminar separation on these bodies by a polymer-induced instability in the laminar boundary layer was found to be responsible for the suppression of inception.

Freestream nuclei populations at test conditions were measured and it was found that if there were many freestream gas bubbles the normally present laminar separation was elminated and travelling bubble type cavitation occurred - the value of the inception index then depended upon the nuclei population. In cases where the laminar separation was present it was found that the value of the inception index was insensitive to the free stream nuclei populations.

On the ecology of species belonging to the genus Mesocyclops Sars (Crustacea, Copepoda) dwelling in the water-bodies of the Urals and Pri-Ural territory. [Translation from: Zoologicheskie Zhurnal 44(1) 127-130, 1965. ]

In the waterbodies of central Russia, the Urals and western Siberia four species of Crustacea, related to the genus Mesocyclops, are widely distributed: M. (s.str.) leuckarti (Claus), M. (Thermocyclops) oithonoides Sars, [M.](Th.) crassus (Fisch.) and M. (Th.) dybowskii (Lande). Numbers and biomass of Mesocyclops oithonoides in the pelagic water of various water-bodies of the Urals are presented and observations on the above mentioned species are discussed.

Radioautographic method of determination of number of bacteria in water-bodies [Translation from: Informatsionnyi Byulleten Biologiya Vnutrennikh Vod No.26, 65-67, 1975]

The radioautographic method of determination of the number of autotrophic microorganisms was initially suggested for counting methane-oxidizing bacteria. With the help of this method colonies of hydrogen-oxidizing bacteria are differentiated even more clearly from heterotrophic. Under laboratory conditions it was shown that colonies grown on membrane filters from a pure culture of thionic bacteria on a nutrient medium with radio- active carbonate, give better prints on film. This method was tested by the authors for determining the number of these bacteria in the meromictic Lake Vae de San Juan during the expedition to Cuba in the summer of 1973. The study showed that that the thionic bacteria are found throughout the pelagial. It proved that the thionic bacteria can be well considered in water-bodies by the radioautographic method.

Biology of the amphipod Gammarus pulex L. in water-bodies of the Leningrad district, and its piscicultural importance [Translation from: Trudy Vsesoyuznogo Gidrobiologicheskogo Obshchestva 7 99-122, 1956]

Observations and laboratory experiments are summarised that examine the widely discussed issue of what Gammarus pulex feeds on. On the basis of the observations of the authors and data from the literature it can be noted that G. pulex belongs to the omnivorous organisms, but, depending on the conditions of subsistence, in its rations either plant or animal food can predominate.

On the classification of lakes and lake-like bodies of the Ukraine [Translation from: Gidrobiologicheskie Zhurnal, Kiev 19(2) 100-101, 1983]

In the Ukraine there are several thousand large, medium and small lakes and lake-like reservoirs, distinguished by origin, salinity, regional position, productivity and by construction a significant number of large and small water bodies, ponds and industrial reservoirs of variable designation. The problem of national systems necessitates the creation of specific schemes and classifications. Classifying into specific types of reservoir by means of suitable specifications is required for planning national measures with the objective of the rational utilisation of natural resources. It is now necessary to consider the present-day characteristics of Ukranian lakes. In the case of the Ukraine it is possible to use two approaches - genetical and ecological. This paper uses the genetical system to classify the lake-like water bodies of the Ukraine.

Electromagnetic scattering from cylindrically and spherically stratified bodies

A method is developed for calculating the electromagnetic field scattered by certain types of bodies. The bodies consist of inhomogeneous media whose constitutive parameters vary only with the distance from some axis or point of symmetry. The method consists in an extension of the invariant imbedding method for treating wave problems. This method, which is familiar in the case of a one-dimensional inhomogeneity, is extended to handle special types of two and three-dimensional inhomogeneities. Comparisons are made with other methods which have been proposed for treating these kinds of problems. Examples of applications of the method are given, some of which are of interest in themselves.