Excitation of low-profile equilateral-triangular dielectric resonator antenna using a conducting conformal strip

A new configuration that employs a conducting conformal strip to excite the low-profile equilaterial-triangular dielectric resonator antenna (DRA) of very high permittivity is proposed. As compared with the previous aperture-coupling configuration, the new configuration has a wider impedance bandwidth (- 5.5%) and a higher front-to-back radiation ratio. The return loss, radiation patterns, and antenna gain are measured and discussed

Compact dual-polarised square microstrip antenna with triangular slots for wireless communication

Design of a dual linearly-polarised microstrip patch antenna, excited by two orthogonal microstrip feed lines, is presented. A reduction in patch size of 35% is obtained when compared to a square patch operating at the same frequency. The polarisations are oriented at +45 and - 45 with an isolation of more than 36 dB between the ports. Unlike earlier designs, the proposed structure provides better gain.

Comments on Simple and Accurate Formula for the Resonant Frequency of the Equilateral Triangular Microstrip Patch Antenna

Antennas and Propagation, IEEE Transactions on,VOL 48,issue 4,pp 636

Attitudes and behaviour towards food attributes and organic food – a triangular methodological investigation of occasional organic consumers

Organic food is increasingly available in the conventional food retail, where organic products are offered alongside with various other types of products and compete mainly with conventional and the so-called conventional-plus products. The latter are conventional products displaying particular quality attributes on the product packaging, such as ‘no artificial additives’, or ‘from animal welfare husbandry’. Often, these quality attributes also apply to organic products. Occasional organic consumers might prefer such conventional-plus alternatives that are perceived to be ‘between’ organic and conventional products. The overall objective of this PhD thesis was to provide information about the segment of occasional organic consumers. In particular, the thesis focussed on consumer perceptions and attitudes towards the quality of, and preferences for, organic, conventional and conventional-plus products in two countries: Germany and Switzerland. To achieve these objectives, qualitative and quantitative consumer research was combined in order to explore occasional organic consumers’ perceptions and attitudes as well as to observe their preferences and buying behaviour regarding different types of food products: organic, conventional and conventional-plus products. The qualitative research showed that, depending on single criteria, organic production was both positively as well as negatively assessed by consumers. Consumer perception of organic food was found to be highly selective and primarily focussed on the final stage of the particular production process. A major problem is that consumers are still mostly unfamiliar with factors associated with organic production, have a lack of confidence, and often confuse organic with conventional products. Besides this, consumer expectations of organic products are different from the expectations of conventional products. The quantitative research revealed that attitudes strongly determine consumers’ preferences for organic, conventional and conventional-plus products. Consumer attitudes tended to differ more between organic and conventional choices rather than conventional-plus and conventional choices. Furthermore, occasional organic consumers are heterogeneous in their preferences. They can be grouped into two segments: the consumers in one segment were less price sensitive and preferred organic products. The consumers in the other segment were more price sensitive and rather preferred conventional-plus or conventional products. To conclude, given the selective and subjective nature of consumer perception and the strong focus of consumer perception on the final stage of the food production process, specific additional values of organic farming should be communicated in clear and catchy messages. At the same time, these messages should be particularly focussed on the final stage of organic food production. The communication of specific added values in relation with organic products to improve the perceived price-performance-ratio is important since conventional-plus products represent an interesting alternative particularly for price sensitive occasional organic consumers. Besides this, it is important to strengthen affirmative consumer attitudes towards organic production. Therefore, policy support should emphasise on long-term communication campaigns and education programmes to increase the consumer awareness and knowledge of organic food and farming. Since consumers expect that organic food is regionally or at least domestically produced while they less accept organic imports, policy support of domestic and regional producers is a crucial measure to fill the current gap between the increasing consumer demand of organic food and the stagnation of the domestic and regional organic food supply.

Classification of sags according to their origin based on the waveform similarity

A statistical method for classification of sags their origin downstream or upstream from the recording point is proposed in this work. The goal is to obtain a statistical model using the sag waveforms useful to characterise one type of sags and to discriminate them from the other type. This model is built on the basis of multi-way principal component analysis an later used to project the available registers in a new space with lower dimension. Thus, a case base of diagnosed sags is built in the projection space. Finally classification is done by comparing new sags against the existing in the case base. Similarity is defined in the projection space using a combination of distances to recover the nearest neighbours to the new sag. Finally the method assigns the origin of the new sag according to the origin of their neighbours

La cooperación triangular como herramienta que contribuye al desarrollo en América Latina. El caso de la Agencia Española de Cooperación Internacional para el Desarrollo y de los países del A, B, C (Argentina, Brasil y Chile). Periodo 2005 -2010

Desde 2005 la cooperación triangular ha venido fortaleciéndose. Esta modalidad ha tenido una importante acogida entre los países beneficiarios o receptores, dado que puede adaptarse mejor a las necesidades de países con realidades similares, planteando múltiples ventajas como: menores costos económicos, impacto más rápido y directo, y un mayor respeto hacia la soberanía de los países beneficiarios o receptores.

La educación en medios, los centros escolares y la familia. Una necesaria relación triangular.

Se presenta la existencia de una revolución tecnológica sin precedente que pone de manifiesto la necesidad de crear nuevas formas de actuación ante los efectos que ello pueda provocar. La familia y los centros escolares se convierten en primera instancia en los sustentadores de esa nueva forma de educar en medios. La educación en medios permite transmitir los nuevos valores que hoy imperan en la sociedad desde una perspectiva abierta, libre de influencias externas.

The double triangular test in practice

The double triangular test was introduced twenty years ago, and the purpose of this paper is to review applications that have been made since then. In fact, take-up of the method was rather slow until the late 1990s, but in recent years several clinical trial reports have been published describing its use in a wide range of therapeutic areas. The core of this paper is a detailed account of five trials that have been published since 2000 in which the method was applied to studies of pancreatic cancer, breast cancer, myocardial infarction, epilepsy and bedsores. Before those accounts are given, the method is described and the history behind its evolution is presented. The future potential of the method for sequential case-control and equivalence trials is also discussed. Copyright © 2004 John Wiley & Sons, Ltd.

The application of Prony’s method to time-domain waveform data modeling in the presence of noise

In this paper,the Prony's method is applied to the time-domain waveform data modelling in the presence of noise.The following three problems encountered in this work are studied:(1)determination of the order of waveform;(2)de-termination of numbers of multiple roots;(3)determination of the residues.The methods of solving these problems are given and simulated on the computer.Finally,an output pulse of model PG-10N signal generator and the distorted waveform obtained by transmitting the pulse above mentioned through a piece of coaxial cable are modelled,and satisfactory results are obtained.So the effectiveness of Prony's method in waveform data modelling in the presence of noise is confirmed.

Deconvolution method for removing the distortion from time jitter in equivalent-time waveform samplers

A sampling oscilloscope is one of the main units in automatic pulse measurement system (APMS). The time jitter in waveform samplers is an important error source that affect the precision of data acquisition. In this paper, this kind of error is greatly reduced by using the deconvolution method. First, the probability density function (PDF) of time jitter distribution is determined by the statistical approach, then, this PDF is used as convolution kern to deconvolve with the acquired waveform data with additional averaging, and the result is the waveform data in which the effect of time jitter has been removed, and the measurement precision of APMS is greatly improved. In addition, some computer simulations are given which prove the success of the method given in this paper.

A very rare hydrogen-bridged hexanuclear CuII complex containing a triangular Cu3O core capped by an unusual triply coordinated perchlorate anion

An unusual hexanuclear Cu-II complex, [{[Cu(NHDEPO)](3)(mu(3)-O)(O3ClO)}(2)(mu-H)]center dot 7ClO(4)center dot 4H(2)O (1) was prepared starting from Cu(ClO4)(2)center dot 6H(2)O and the oxime-based Schiff base ligand NHDEPO (= 3-[3-(diethylamino)propylimino]butan-2-one oxime). Structural characterization of the complex reveals that it consists of two triangular Cu3O units, the copper ions being at the corners of an equilateral triangle, separated by an O center dot center dot center dot O distance of 2,447(5) angstrom, held together solely by a proton. In each triangle, the copper atoms are in square-pyramid environments. The equatorial plane consists of the bridging oxygen of the central OH-(O2-) group together with three atoms (N, N, O) of the Schiff base. All Unusual triply coordinated perchlorate ion (mu(3)-kappa O:kappa O':kappa O '') interacts in axial position with the three copper ions, Variable-temperature (2-300 K) magnetic susceptibility measurements show that complex 1 is antiferromagnetically Coupled (J = -148 cm(1-)). The EPR data at low temperature clearly indicates the presence of spin frustration phenomenon in the complex.

Analysis of full-waveform LiDAR data for classification of an orange orchard scene

Full-waveform laser scanning data acquired with a Riegl LMS-Q560 instrument were used to classify an orange orchard into orange trees, grass and ground using waveform parameters alone. Gaussian decomposition was performed on this data capture from the National Airborne Field Experiment in November 2006 using a custom peak-detection procedure and a trust-region-reflective algorithm for fitting Gauss functions. Calibration was carried out using waveforms returned from a road surface, and the backscattering coefficient c was derived for every waveform peak. The processed data were then analysed according to the number of returns detected within each waveform and classified into three classes based on pulse width and c. For single-peak waveforms the scatterplot of c versus pulse width was used to distinguish between ground, grass and orange trees. In the case of multiple returns, the relationship between first (or first plus middle) and last return c values was used to separate ground from other targets. Refinement of this classification, and further sub-classification into grass and orange trees was performed using the c versus pulse width scatterplots of last returns. In all cases the separation was carried out using a decision tree with empirical relationships between the waveform parameters. Ground points were successfully separated from orange tree points. The most difficult class to separate and verify was grass, but those points in general corresponded well with the grass areas identified in the aerial photography. The overall accuracy reached 91%, using photography and relative elevation as ground truth. The overall accuracy for two classes, orange tree and combined class of grass and ground, yielded 95%. Finally, the backscattering coefficient c of single-peak waveforms was also used to derive reflectance values of the three classes. The reflectance of the orange tree class (0.31) and ground class (0.60) are consistent with published values at the wavelength of the Riegl scanner (1550 nm). The grass class reflectance (0.46) falls in between the other two classes as might be expected, as this class has a mixture of the contributions of both vegetation and ground reflectance properties.

Effective LAI and CHP of a single tree from small-footprint full-waveform LiDAR

This letter has tested the canopy height profile (CHP) methodology as a way of effective leaf area index (LAIe) and vertical vegetation profile retrieval at a single-tree level. Waveform and discrete airborne LiDAR data from six swaths, as well as from the combined data of six swaths, were used to extract the LAIe of a single live Callitris glaucophylla tree. LAIe was extracted from raw waveform as an intermediate step in the CHP methodology, with two different vegetation-ground reflectance ratios. Discrete point LAIe estimates were derived from the gap probability using the following: 1) single ground returns and 2) all ground returns. LiDAR LAIe retrievals were subsequently compared to hemispherical photography estimates, yielding mean values within ±7% of the latter, depending on the method used. The CHP of a single dead Callitris glaucophylla tree, representing the distribution of vegetation material, was verified with a field profile manually reconstructed from convergent photographs taken with a fixed-focal-length camera. A binwise comparison of the two profiles showed very high correlation between the data reaching R2 of 0.86 for the CHP from combined swaths. Using a study-area-adjusted reflectance ratio improved the correlation between the profiles, but only marginally in comparison to using an arbitrary ratio of 0.5 for the laser wavelength of 1550 nm.

Validation of Canopy Height Profile methodology for small-footprint full-waveform airborne LiDAR data in a discontinuous canopy environment

A Canopy Height Profile (CHP) procedure presented in Harding et al. (2001) for large footprint LiDAR data was tested in a closed canopy environment as a way of extracting vertical foliage profiles from LiDAR raw-waveform. In this study, an adaptation of this method to small-footprint data has been shown, tested and validated in an Australian sparse canopy forest at plot- and site-level. Further, the methodology itself has been enhanced by implementing a dataset-adjusted reflectance ratio calculation according to Armston et al. (2013) in the processing chain, and tested against a fixed ratio of 0.5 estimated for the laser wavelength of 1550nm. As a by-product of the methodology, effective leaf area index (LAIe) estimates were derived and compared to hemispherical photography-derived values. To assess the influence of LiDAR aggregation area size on the estimates in a sparse canopy environment, LiDAR CHPs and LAIes were generated by aggregating waveforms to plot- and site-level footprints (plot/site-aggregated) as well as in 5m grids (grid-processed). LiDAR profiles were then compared to leaf biomass field profiles generated based on field tree measurements. The correlation between field and LiDAR profiles was very high, with a mean R2 of 0.75 at plot-level and 0.86 at site-level for 55 plots and the corresponding 11 sites. Gridding had almost no impact on the correlation between LiDAR and field profiles (only marginally improvement), nor did the dataset-adjusted reflectance ratio. However, gridding and the dataset-adjusted reflectance ratio were found to improve the correlation between raw-waveform LiDAR and hemispherical photography LAIe estimates, yielding the highest correlations of 0.61 at plot-level and of 0.83 at site-level. This proved the validity of the approach and superiority of dataset-adjusted reflectance ratio of Armston et al. (2013) over a fixed ratio of 0.5 for LAIe estimation, as well as showed the adequacy of small-footprint LiDAR data for LAIe estimation in discontinuous canopy forests.